ATEC AL170 LCD MONITER User Manual FCC030627

Download:
Mirror Download [FCC.gov]
Document ID	339314
Application ID	/H6gyXL02hDc7nQi2iox9w==
Document Description	MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	192.82kB (2410206 bits)
Date Submitted	2003-07-11 00:00:00
Date Available	2003-07-11 00:00:00
Creation Date	2003-07-09 15:47:01
Producing Software	Acrobat PDFWriter 4.0 Windows¿ë
Document Lastmod	2003-07-09 16:18:23
Document Title	æ­¯FCC030627.PDF
Document Creator	æ­¯FCC030627.hwp
Document Author:	æ­¯Choi

Before Use
● This user manual contains proprietary information that is protected by copyright.
All rights are reserved. No part of this user manual may be reproduced, photocopied,
transcribed, translated or transmitted in whatsoever from without the prior permission of
the manufacturer.
● The size and appearance of this monitor may be changed for improvement without
notice.
● Damage caused by using the unauthorized components or disregard of the information
and cautions in this user manual is not covered by the warranty service.
● If you have problem with your monitor, please check TroubleShooting in this user
manual before asking for help service center.
● The information in this user manual is subject to change without notice.
● If you let display the static images on the LCD monitor for prolonged time, the LCD
monitor may show you the screen images retention. It is not a continuous condition and
will fade away in a period time. The Image retention is a condition that may occur on all
LCD monitors.
● The LCD consists of about 5 million pixels. One pixel includes 3 dots and some of dots
could be seen bright and dark compared to other dots. Please, note that it may occur
on all LCD monitors and it is not a product inferiority.
English
English
CE Conformity Notice
The Product herewith complies with requirements of the Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC and carries the ‘CE’ mark accordingly.
Confirms to the following hamonized European standards have been applied:
EMC : EN 55022 Class B : 1998
EN 55024 : (EN 61000-4-2 : 1995, A1 : 1998, EN61000-4-3 : 1996, EN 61000-4-4:
1995, EN61000-4-5 : 1995, EN61000-4-4 : 1996, EN61000-4-8 : 1993 and
EN61000-4-11 : 1994)
EN61000-3-3 : 1995, A1 : 98, A2 : 98
EN61000-3-3 : 1995
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions : (1) this device may not cause harmful interference, and (2) this device must
accept any interference received including interference that may cause undesired
operation.
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
resonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment an receiver.
- Connect the equipment into an outlet in a circuit different from that to which the receiver is
connected.
- consult the dealer or an experienced radio / TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the use’s
authority to operate the equipment.
Unpacking
After opening the box, make sure the following items are provided with the monitor.
If you find that any of these items is missing or appears damaged, contact your
dealer immediately.
Audio Cable
Diskette
(Monitor Driver)
Monitor
User Manual
DC Adapter
Power Cord
VGA Signal Cable
Note
The actual monitor and accessories may appear differently from those shown on
the above figure
English
Instructions for Safety
English
▶ Matters that demand special attention are divided into ‘Warning’ and
‘Caution’, and are detailed a follows.
In case of the possibility that a serious injury or death
may occur during a violation of the instructions.
In case of the possibility that a slight injury or product
damage may occur during a violation of the instructions.
● Don’t plug the power adapter into a non-grounding
power outlet.
● Never touch the power plug with wet hands.
An electric shock accident may occur.
● Don’t plug with other electrical cords into one power outlet.
An electric shock or fire accident may occur.
● Only use the adapter provided with the monitor.
An electric shock or fire accident may occur.
● Don’t use a power cord or plug that is frayed or damaged.
An electric shock or ignition may be caused.
● Insert the plug completely so that the power supply unit
can be connected tightly.
Unsafe power connection may cause a fire.
English
● Keep the power cord from proximity to a heating instrument.
The covering material of the cord may melt, causing a fire or
electric shock.
● Grasp the power plug at the base to remove it from the
wall, and pull firmly but gently.
If you yank at the cord, the wire may be broken, causing
ignition or heat generation.
● Pull the power cord out when the monitor is not used for
a long time, or while you are away.
A dust covering may cause an electric shock, electric leakage,
or fire by heat generation, ignition, and insulation degradation.
● Select a cool, dry area and protect your monitor from
extremes in temperature, humidity, dust and smoke.
Accidents of electric shock, fire or failure may occur.
● Avoid direct sunlight or any other source of heat such
as a fireplace.
A fire or electric shock accident may be caused.
● Place the monitor at a proper distance (over 10 cm)
away from the wall for sufficient ventilation.
A fire may be caused due to an increase in internal temperature.
● Place the monitor in a well-ventilated room.
A fire may be caused due to an increase in internal temperature.
● Note that air-flow holes must not be blocked such as a
table cloth or curtain.
A fire may be caused due to an increase in internal temperature.
English
● Don’t block or obstruct the air-flow holes of the monitor.
A fire or damage of the monitor may be caused due to an
increase in internal temperature.
● Don’t spill liquids such as chemicals, water on the monitor.
A fire or electric shock accident may be caused.
● Never disassemble and repair the monitor but trained
repair engineers.
A fire or electric shock accident may be caused. If you need the
repair and adjustment, please contact the appropriate sales
agency or customer counsel window for check-ups.
● Don’t insert metals (such as coins, hair pins or ironware)
or flammable items (such as paper or matches) into the
monitor.
A fire or electric shock accident may be caused.
● Stop using in case of smoke or abnormal odors.
Immediately turn off the power and pull out the power
cord from the wall and then contact the service center.
Continuity of use in such a state may cause a fire or electric
shock.
● Don’t spray any liquids directly onto the monitor.
An electric shock or fire accident may occur.
● Clean the LCD panel with a soft material such as cotton
cloth after removing the power cord from the monitor.
A fire or electric shock accident may be caused.
English
● Place the monitor on a stable and secure surface.
Fall or displacement of the monitor may cause an injury.
● Turn off the monitor and disconnect all cables from the
monitor before moving the monitor.
● Be careful with the shock when moving the monitor.
● Don’t scratch or jolt the monitor surface.
Damage or failure of the panel may be caused.
● Take hold of the monitor with both hands setting the
panel forward.
If the monitor is dropped, contact the service center to check
it for a susceptibility to fire or electric shock.
● Often take a rest to protect your eyes when you work
for a long time.
● Don’t press upon the panel or scratch the surface with
your hands or sharp item such as a nail, pens.
Damage or failure of the panel may be caused.
● The fluorescent light of the monitor contains a mercury
which could be exploded. Don’t discard or bury the
monitor without permission of the law concerned.
CONTENTS
English
Installing the Monitor
1.1
Features
…………………………………………………………… 1
1.2
Installing and Removing the Support ……………………………… 2
Installing the Support ……………………………………………………… 2
Removing the Support …………………………………………………… 2
1.3
Monitor Overview ………………………………………………… 3
Front Side …………………………………………………………… 3
Rear Side …………………………………………………………… 4
1.4
Connecting the Peripheral Devices …………………………… 5
Installing the Monitor Driver
2.1
Installing the Monitor Driver Under Windows …………………… 7
Windows 98/Me …………………………………………………………… 7
Windows 2000 ……………………………………………………………… 8
Windows XP ………………………………………………………………… 9
2.2
Installing the Monitor Driver Under Linux………………………… 10
Adjusting the OSD(On Screen Display) Menu
3.1
Selecting and Adjusting the OSD(On Screen Display) Menu
………………………………………………………………………………… 11
Selecting and Adjusting the OSD Menu …………………………… 12
3.2
Exclusive ANALOG Monitor OSD Menus ……………………… 12
Main Menu …………………………………………………………… 12
Troubleshooting/Specification
A.1
Troubleshooting ………………………………………………………… 15
A.2
Specification ……………………………………………………………… 16
1.1 Features
Adopt the 17.0 LCD(Liquid Crystal Display) narrow bezel panel which allows you
efficient use in a small space due to the slim design with wide screen.
AUDIO
It gives user an amplified stereo sound through internally installed speakers (2 W).
Power Consumption Economy Function
The VESA DPMS(Display Power Management Signaling) function is available to reduce
power consumption by automatically switching the computer into the power saving mode if
the system doesn’t operate for a fixed period of time.
Tilting and Swiveling the Monitor
For optimum view, you can tilt the display vertically from -5°to 30°degree. When adjusting
the display, grasp the left and right edges of the monitor.
Tilting
Installing the Monitor
Adopt the 17.0 TFT LCD Narrow Bezel Panel
1.2 Installing and Removing the Support
Installing the Support
Lay a soft cloth and place the monitor on
it with the screen facing downwards.
(Take caution not to cause scratches
to the LCD display.)
Latch
Push in the support in the direction of the
arrow. (Make sure that the ‘latches’ are
fixed to the LCD.)
Support
Removing the Support
While pressing the ‘latches’ on both
sides, push the support in the direction
of the arrow and remove it.
❶
❷
Support
Latch
1.3 Monitor Overview
Installing the Monitor
This section identifies the name of each component of the monitor and briefly
describes the function of each component.
Front Side
LEFT Button
Decreases the value of the
selected item. (Decreases the
volume without pressing the
MENU Button.)
TFT LCD Display
Displays the current contents
of the display.
SELECT Button
RIGHT Button
Selects the OSD menu item
and the submenu item to be
adjusted in the OSD menu
window and save the modified
value at any selected item.
(If you press continuously every
two times, the input source will
be switched.)
Increases the value of
the selected item.
(Increases the volume
without pressing the
MENU Button.)
POWER Button
Turns the monitor on and off.
MENU Button
AUTO Button
Displays or Exits the OSD
menu window.
Press the AUTO button with no OSD
menu shown on the screen, and the
screen is automatically adjusted into
the optimal state applicable to the
current mode, showing the
PROGRESSING AUTO
CONFIGURATION message.
If you are not satisfied with the auto
adjustment, you can additionally
adjust the H/V Position, Clock and
Phase of the OSD menus. (For the
OSD menu setup method, refer to the
‘OSD Menu Functions’)
DOWN Button
Moves to the down menu
item in the OSD menu window.
UP Button
Moves to the up menu item in the OSD menu window.
POWER LED
Indicates the monitor power status.
Green : Monitor activated.
Orange : Monitor standby/Monitor power saving
mode/VGA signal cable unhooked.
Rear Side
AUDIO IN
Connects the audio cable to the LINE
OUT jack on the computer or the
stereo jack on the camcorder/VTR.
AUDIO OUT
Connects a set of headphones
or external speakers.
ANALOG Connector
Connects the VGA signal cable to the
ANALOG connector on the computer.
DC-IN
Connects the DC adapter to input
the power.
Note
Note
▶To enjoy the sound with your monitor, at first you
must connect the audio cable to AUDIO IN on the
monitor and LINE OUT on the computer, and then
connect a set of headphones or external
speakers.
▶ Self Diagnostics Screen (ANALOG)
If the signal cable is
improperly connected
between the monitor and
the computer, and if the
computer is in the DPMS mode, ‘ANALOG POWER
SAVER MODE’ message appears on the screen.
1.4 Connecting the Peripheral Devices
Connecting the power
Plug into the power outlet at 220V or 110V.
(The voltage is set automatically.)
DC-IN Jack
DC Adapter
Power Cord
Connecting the computer
Connect the ANALOG connector on the computer.
ANALOG Connector
ANALOG Connector
VGA Cable
Installing the Monitor
Turn off the monitor, computer and other peripheral devices before connecting the
monitor and peripheral devices.
3
Connecting Audio Devices
Connect the audio cable to the AUDIO IN on the monitor and the LINE OUT on the
computer or connect the audio cable (RCA) cable to the AUDIO IN on the monitor and the
stereo on the camcorder/TV and connect a set of headphones or external speakers to the
AUDIO OUT.
Set of headphones
External Speakers
AUDIO IN
AUDIO
OUT
Camcorder
Stereo
AUDIO Cable
AUDIO(RCA) Cable
LINE OUT
2.1 Installing the Monitor Driver Under Windows
This section shows how to install the monitor driver under Windows or Linux by using the monitor
driver diskette provided. To install the monitor driver, please refer to your OS in this section.
Windows 98/Me
Turn on the computer and the monitor.
Insert the monitor driver diskette into the FDD on the computer.
Click the Start button on the Windows display and select Control Panel.
Double click the Display icon in the Control Panel window.
In the Display Properties window, click the Setting tab and then select Advanced.
Select the Monitor tab and click Properties.
This wizard searches updated drivers for next device.
Click Next.
What do you want Windows to do?
Select Display a list of all the drivers in a specific location, so you can select the
driver you want option and click Next.
Select the manufacturer and model of your hardware device.
Click Have Disk.
Note
If it doesn’t show up the relevant model in device selection window, click List all
Device, select one of them and then click OK.
10
Install From Disk
￦> and click OK.
Click Browse, select 
Click the Browse button, and select  and then click OK.
Click Browse, select 
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : .歯.FCC030627.hwp
Create Date                     : 2003:07:09 15:47:01
Title                           : .歯.FCC030627.PDF
Author                          : .歯.Choi
Producer                        : Acrobat PDFWriter 4.0 Windows¿ë
Modify Date                     : 2003:07:09 16:18:23+09:00
Page Count                      : 25

EXIF Metadata provided by EXIF.tools