Download: Mirror Download [FCC.gov] Document ID 545656 Application ID Y7MASgO88XkzxldTtc+esA== Document Description Users Manual 2 of 3 Short Term Confidential No Permanent Confidential No Supercede No Document Type User Manual Display Format Adobe Acrobat PDF - pdf Filesize 247.16kB (3089532 bits) Date Submitted 2005-05-25 00:00:00 Date Available 2005-05-25 00:00:00 Creation Date 2005-05-16 16:35:59 Producing Software ezPDFGate with Acrobat Distiller Document Lastmod 2005-05-16 16:40:09 Document Title ¹ÌÃÖÇâTV ¸Å´º¾ó37Çü+42Çü_2Àåb77µ Document Creator QuarkXPress3.3K: LaserWriter 8 KH-8.7.1 Document Author: ¹ÌÃø
Watching TV
To configure the menu
To Configure TV Channels
To Select TV/External Input
Adjusting the Picture
Adjusting the Sound
Configuring the PIP/POP/PBP Functions
To Configure the SET UP
External Control Device Setup
2-2
Check the antenna connection. (For more information on connection, see
‘1.4 Connecting the LCD TV and Peripheral Devices’.)
Press the power button on the rear panel of the LCD TV.
Press the button on the remote control.
Press the button on the remote control, and press the number button
to select a channel (For example, if selecting channel no. 99, press the 9
button twice on the remote control).
Press the <
Watching TV
> button to adjust the volume.
Using the LCD TV
N O T E
▶ To mute the LCD TV sound
Press the button on the remote control once to mute the
LCD TV sound. Press the button once again to turn the sound back
on.
▶ To completely turn off the LCD TV power.
❶ Press the button on the remote control. The
LCD TV will be turned off and remain in standby mode.
❷ Press the power button on the rear panel of the LCD TV (or unplug the power cord from the wall
outlet).
Watching TV
2-3
To configure the LCD TV functions, press the [MENU] button. Knowing the
method for configuring the menu will make using the LCD TV much easier.
Menu Settings
Press the power button on the rear panel of the LCD TV, and press the
button on the remote control.
Press the button on the remote control.
Press the <
> button on the remote control to navigate to different menus.
2-4
To configure the menu
Using the LCD TV
Press the button or the <
> button on the remote control to select the menu
to configure. Submenus will be available for each selection.
In the submenus, use the <
> button on the remote control to navigate to different
items. Use the <
> button to make adjustments. When selecting PIP Source, use the
> button to make adjustments, and then press the button on the remote
control to make a selection (Select the ‘User’ item under the 'PSM’ submenu).
To configure the menu
2-5
Using the LCD TV
Use the <
> button and the <
> button on the remote control to adjust the
settings for different items. (For example, adjustment can be made of items such as
Brightness, Contrast, Color, Sharpness, and Tint.)
When adjustments are complete, press the button once to close the adjustment
screen. Press the button once again to close the ‘Menu’ screen.
N O T E
▶ To configure the menu without using the remote controller
❶ Press the button located at the bottom of the LCD TV.
❷ Press the buttons to navigate to submenus.
❸ Press the buttons to adjust each item.
❹ If ‘Menu for Local Key’ is on, the button is used as the button. When adjustments
have been completed, press the button to close the ‘Menu’ screen.
2-6
To configure the menu
Using the LCD TV
TV Menu Categories and Items
The Main Menu contains 5 categories, which in turn contain submenus and option items:
Main Menu
PICTURE
Sub Menu 1
Sub Menu 2
Sub Menu 3
PSM
Dynamic
Vivid Picture Appearance
(Select Screen
View)
Standard
Standard Picture Appearance
Mild
Softer Picture Appearance
Game
Select when playing video games on LCD TV
User
Brightness : Adjust brightness. (Brightness
means the brightness of the screen.)
Contrast : Adjust contrast. (Contrast means
the difference in brightness between an object
and its background.)
Colour : Adjust color (RGB).(Adjusting the
color to make it look more natural.)
Sharpness : Adjust sharpness.(Sharpness
means the sharpness of the object's profile.)
Tint : Adjust color intensity.(Color intensity
indicates color depth.)
SOUND
Effect
Flat
Standard factory settings.
Music
When watching music video or concerts.
Movie
When watching movies.
Speech
When watching a show that is mostly dialogue.
User
Bass : Adjust bass.
Treble : Adjust treble.
Surround
Off
Surround Output Off
Normal
Optimal Surround for Output Condition
Spatial
Enhanced Surround
AVL
On/Off
AVL Function On/Off
Balance
-10 ~ 10
Adjust balance between the left & right speakers.
To configure the menu
2-7
Using the LCD TV
Main Menu
PIP/POP/PBP
Sub Menu 1
Sub Menu 2
Sub Menu 3
On/Off
Off
PIP/POP/PBP Function Off
Description
PIP
Source
TV, AV1~AV3,
Component1~2, RGB, DVI
POP
Swap
To Set
PIP Size
Small, Large
PIP Position
PIP Screen Position Selection
Source
TV, AV1~AV3,
Component1~2, RGB, DVI
PBP1~2
SET UP
Language
Swap
To Set
Source
TV, AV1~AV3,
Component1~2, RGB, DVI
Swap
To Set
English, Deutsch, Français, Español, Italiano, Korean
(Menu Screen Display Language Selection)
Transparency
0~10
Adjusts the image transparency
ARC
16:9, 14:9, 4:3
Screen Aspect Selection
ISM Method
Normal
Normal screen
Orbit
Moves the screen up, down, left and right in
small increments to prevent overheating of the
panel during prolonged use.
White
Sets the whole screen to white.
Set ID
0~99
Set ID Selection
Factory Reset
Off
Timer
Clock
Selects the factory default.
Time Selection
AM, PM
Off Timer
On Timer
Caption
Parental
AM, PM, On/Off TV Off Time Selection
AM, PM, On/Off TV On Time Selection
CHANNEL
CATV/Air
Volume
0~100
Auto Off
On/Off
TV Off Auto Function Selection
TEXT 1~4
Text function support
Off
Caption function Off (when the subtitle function is provided)
CC1~4
Closed Captioning function support
Lock On/Off
Parental function On/Off
MPAA
MPAA(Motion Picture Association of America)
Guideline setup available
2-8
To configure the menu
TV Guidelines
TV Guidelines function support
Set Password
Password setup available
Using the LCD TV
Main Menu
CHANNEL
Sub Menu 1
Sub Menu 2
Air/CATV
Scan by broadcasting method
Auto CH Progress Automatic channel scan
Channel
Scans the TV channels and registers the channels on air
Add/Del Channel
Saves the selected channels
Fine Tune
Manually fine tune the channels if the channel reception is not good
To configure the menu
2-9
To watch TV with the LCD TV, configure the channels. (Always check the TV
connection before use.)
To save TV channels, configure the channels during the broadcasting hours.
Use Automatic Channel Scanning to save all the channels currently airing.
Setting channels automatically
2-10
Press the button on the remote control, and press the <
the remote control to navigate to the ‘Channel’ menu.
Press the < > button on the remote control to select the ‘Air/CATV’ submenu.
Press the < > button on the remote control to select the broadcasting method
(external input).
To Configure TV Channels
> button on
Using the LCD TV
Press the <
> button on the remote control to move to the ‘Auto CH Progress’
submenu. At the ‘Auto CH Progress’ item, press the < > button on the remote
control to run ‘To Start’. Channels will be scanned and saved automatically.
Press the button on the remote control to close the ‘Menu’ screen.
Storing the Channel Manually
Press the button on the remote control, and press the <
the remote control to navigate to the ‘CHANNEL’ menu.
> button on
To Configure TV Channels
2-11
Using the LCD TV
2-12
Press the <
> button on the remote control to move to the ‘Channel’
submenu, and press the <
> button to select the channel with the best video
quality from the channels found.
Press the < > button on the remote control to move to the ‘Add/Del Channe’
submenu. Press the < > button on the remote control to select ‘Add’ and press the
button.
Press the button on the remote control to close the ‘Menu’ screen.
To Configure TV Channels
Using the LCD TV
To Configure TV Channels
2-13
An external input signal connected to the LCD TV can be selected for viewing.
(VCR, DVD, Camcorder, etc.)
Selecting an External Input Device Connected to the LCD TV for viewing
Press the button on the remote control.
The ‘MAIN SOURCE’ screen will be displayed.
Press the <
> button on the remote control to
select the external device connected to the LCD TV,
and press the button.
LCD TV screen will be displayed when you play
the external input device.
N O T E
▶ Press the button at the bottom of the LCD TV to open the 'MAIN SOURCE’ screen.
Use the CH ▲/▼ button to navigate to the 'Connected External Device’ mode, and press the
button to make a selection.
Selecting External Input Device When Playing PIP/POP/PBP
Check the location of the external input device connected to the LCD TV, and select an
appropriate item. (Connection with cable broadcast, connection with VCR, connection with
DVD, connection with camcorder, etc.)
2-14
Press the button on the remote control.
To Select TV/External Input
Using the LCD TV
Press the <
> button on the remote control to navigate to the ‘PIP/POP/PBP’ menu,
and press the <
> button to navigate to the ‘On/Off’ submenu.
Press the <
> button on the remote control. Option items will be displayed according
to the items ‘PIP, POP, PBP1, and PBP2’.
Configure settings for each of the items PIP, POP, PBP1, and PBP2. Select the external
input device connected to the LCD TV and configure the appropriate option item
(PIP/POP/PBP).
Using PIP Mode
LCD TV Screen
To Select TV/External Input
2-15
Using the LCD TV
2-16
Using POP Mode
LCD TV Screen
Using PBP1 Mode
LCD TV Screen
Using PBP2 Mode
LCD TV Screen
To Select TV/External Input
Using the LCD TV
When option configuration for each item is complete, press the button on the
remote control.
To swap between the main screen and the sub-screen when in PIP, POP, or PBP mode,
press the button on the remote control.
To Select TV/External Input
2-17
The LCD TV has been configured with optimal contrast, brightness, sharpness,
colors, etc. by factory default, and there is no need for any further user
configuration. However, if you wish to adjust the picture settings, follow the
instructions below.
Press the button on the remote control.
Press the <
> button on the remote control to navigate to the ‘PSM’ submenu. Press
the <
> button on the remote control to select options provided in PSM (Picture
Standard Mode).
PSM (Picture Standard Mode) provides the following functions:
● Standard : Standard Picture Appearance
● Mild : Softer Picture Appearance
● Game : Select this when playing video games on LCD TV.
● Dynamic : Vivid Picture Appearance
● User : Available user setting items are Brightness, Contrast, Colour, Sharpness, Tint, etc.
2-18
Adjusting the Picture
Using the LCD TV
- Brightness : Adjust brightness. (Brightness means the brightness of the screen.)
- Contrast : Adjust contrast. (Contrast means the difference in brightness between an object
and its background.)
- Color : Adjust color (RGB). (Adjusting the color to make it look more natural.)
- Sharpness : Adjust sharpness. (Sharpness means the sharpness of the object's profile.)
- Tint : Adjust color intensity. (Color intensity indicates color depth.)
When configuration is complete, press the button on the remote control, and then
press the button on the remote control to close the ‘Menu’ screen.
Adjusting the Picture
2-19
1
Press the button on the remote control.
Press the <
Press the <
> button on the remote control to navigate to the ‘Effect’ submenu.
Press the < > button on the remote control to select the options provided in ‘Effect’.
When configuration is complete, press the button.
> button on the remote control to navigate to the ‘SOUND’ menu.
- Flat : Standard factory settings.
- Music : When watching music video or concerts.
- Movie : When watching movies.
- Speech : When watching a show that is mostly dialogue.
- User : Available user setting items are Bass, Treble, etc.
2-20
Adjusting the Sound
Using the LCD TV
● Bass : Adjusts bass
● Treble : Adjusts treble
Press the <
> button on the remote control to navigate to the ‘Surround’ submenu.
Press the <
> button on the remote control to select options provided in ‘Surround’.
When configuration is complete, press the button.
- Off : Select this if not using the Surround output function.
- Normal : Surround sound optimized to the output conditions will be used.
- Special : Enhances the surround output.
Adjusting the Sound
2-21
Using the LCD TV
2-22
Press the <
> button on the remote control to navigate to the ‘AVL’ submenu.
Press the < > button on the remote control to select whether to use the ‘AVL’ function.
When selection is complete, press the button.
Press the <
> button on the remote control to navigate to the ‘Balance’ submenu.
Press the < > button on the remote control to adjust ‘Left and Right Speaker Sound
Balance’. When adjustment is complete, press the button.
When configuration is complete, press the button to close the ‘Menu’ screen.
Adjusting the Sound
Using the LCD TV
Adjusting the Sound
2-23
Two channels can be shown on the TV screen simultaneously. Available screen
division methods are PIP (Picture in a Picture), POP (Picture on a Picture), and
PBP (Picture by a Picture).
PIP Function Settings
Press the button on the remote control.
Press the <
Press the <
> button on the remote control to navigate to the ‘On/Off’ submenu.
Press the < > button on the remote control to select ‘PIP’. When configuration is
complete, press the button.
> button on the remote control to navigate to the ‘PIP/POP/PBP’ menu.
● Source : Select the external input source (TV, AV1~AV3, Component1~2, RGB, or DVI).
● Swap : Swap between the main screen and the sub-screen (To Set).
● PIP size : Select the PIP screen size (Small or Large).
● PIP position : Select the PIP screen position.
2-24
When configuration is complete, press the button to close the ‘Menu’ screen.
Configuring the PIP/POP/PBP Functions
Using the LCD TV
POP Function Settings
Press the button on the remote control.
Press the <
Press the <
> button on the remote control to navigate to the ‘On/Off’ submenu.
Press the < > button on the remote control to select ‘POP’. When configuration is
complete, press the button.
> button on the remote control to navigate to the ‘PIP/POP/PBP’ menu.
● Source : Select the external input source (TV, AV1~AV3, Component1~2, RGB, or DVI).
● Swap : Swap between the main screen and the sub-screen (To Set).
When configuration is complete, press the button to close the ‘Menu’ screen.
PBP Function Settings
Press the button on the remote control.
Press the <
> button on the remote control to navigate to the ‘PIP/POP/PBP’ menu.
Configuring the PIP/POP/PBP Functions
2-25
Using the LCD TV
Press the <
> button on the remote controller to navigate to the ‘On/Off’ submenu.
Press the < > button on the remote controller to select ‘PBP1 or PBP2’. When
configuration is complete, press the button.
● Source : Select the external input source (TV, AV1~AV3, Component1~2, RGB, or DVI).
● Swap : Swap between the main screen and the sub-screen (To Set).
2-26
When configuration is complete, press the button to close the ‘Menu’ screen.
Configuring the PIP/POP/PBP Functions
Using the LCD TV
Configuring the PIP/POP/PBP Functions
2-27
Various functions for watching TV can be configured.
(Language, Transparency, ARC, ISM Method, Timer, Caption, Parental etc.)
Selecting the Main Screen Language
Press the button on the remote control.
Press the <
Press the <
> button on the remote control to navigate to the ‘Language’
submenu. Press the < > button on the remote control to select the preferred
language. When selection is complete, press the button.
(English, Deutsch, Français, Español, Italiano, Korean)
When configuration is complete, press the button to close the ‘Menu’ screen.
> button on the remote control to navigate to the ‘SET UP’ menu.
Adjusting Image Transparency
2-28
Press the button on the remote control.
Press the <
> button on the remote control to navigate to the ‘Setup’ menu.
To Configure the SET UP
Using the LCD TV
Press the <
> button on the remote control to navigate to the ‘Transparency’
submenu. Press the <
> button on the remote control to adjust the Image
Transparency. When adjustment is complete, press the button (the settings
possible are 0~10).
When configuration is complete, press the button to close the ‘Menu’ screen.
Selecting Screen ARC
Press the button on the remote control.
Press the <
Select ‘Off’ in the ‘On/Off’ submenu, and press the button.
> button on the remote control to navigate to the ‘POP/POP/PBP’ menu.
To Configure the SET UP
2-29
Using the LCD TV
Press the <
Press the <
> button on the remote control to navigate to the ‘ARC’ submenu.
Press the < > button on the remote control to select Screen Aspect. When selection
is complete, press the button (16:9, 14:9 or 4:3).
> button on the remote control to navigate to the ‘SET UP’ menu.
<16:9>
<14:9>
<4:3>
Supported Only When the PIP/POP/PBP mode is Set to OFF
When configuration is complete, press the button to close the ‘Menu’
screen.
Setting Sleep Timer
Set the sleep timer to switch the TV power to the standby mode automatically when a
specified time has elapsed.
N O T E
▶ Press the button on the remote control to set the sleep timer.
2-30
Press the button on the remote control.
Press the <
> button on the remote control to navigate to the ‘SET UP’ menu.
To Configure the SET UP
Using the LCD TV
Press the <
press the <
displayed.
Under ‘Clock’, press the < > button and the <
> button on the remote control to
set the current time. (When setting time, press the <
> button on the remote control
to set ‘Hour’, press the <
> button to move to’Minutes’, press the <
> button to
set ‘Minutes’, press the <
> button to move to ‘AM/PM’, and press the <
button to select ‘AM/PM’.)
When setting is complete, press the < > button on the remote controller to navigate
to ‘Clock’, and press the <
> button to navigate to ‘Off Timer’.
In ‘Off Timer’, press the < > button and the <
> button on the remote control to set
the ‘TV Off’ timer. (When setting time, press the <
> button on the remote control to
set ‘Hour’, press the < > button to move to ‘Minutes’, press the <
> button to set
‘Minutes’, press the < > button to move to ‘AM/PM’, and press the <
> button to
select ‘AM/PM’.)
> button on the remote control to navigate to the ‘Timer’ submenu, and
> button on the remote control. The ‘Time Selection’ screen will be
N O T E
▶ To turn the TV off automatically, see the section on ‘Off Timer’ settings for visual settings.
The program channel and volume level can also be configured for cases when the LCD TV is turned on.
When configuration is complete, press the <
> button on the remote control to navigate
to ‘Off Timer’, and press the <
> button on the remote control to navigate to ‘Auto
Off’. Press the < > button on the remote control to select ‘On’.
When configuration is complete, press the button to close the ‘Menu’ screen.
To Configure the SET UP
2-31
Using the LCD TV
Viewing Closed Captions
The LCD TV can decodes and displays the closed caption that are broadcast with
certain TV shows. These captions are usually subtitles for the hearing impaired or
foreign-language translations. All VCRs record the colsed caption signal from
television program, so home-recorded video tapes also provide closed captions. Most
prerecorded commercial video tapes provide closed captions as well. Check for the
closed caption symbol in television schedule and on the tape’s packing : CC
N O T E
▶ The Caption feature dose not work with PC signals.
2-32
Press the button on the remote control.
Press the <
> button on the remote control to navigate to the ‘SET UP’ menu.
Press the <
submenu.
> button on the remote control to navigate to the ‘Caption’
Press the <
> buttons to select ‘CC1~4’ or ‘TEXT1~4’.
To Configure the SET UP
Using the LCD TV
N O T E
▶ In Caption mode, captions appear at the bottom of the screen, and they usually cover only a small portion
of the picture.
▶ In TEXT mode, information is not related to the program, such as news or weather, is displayed. Text
often covers a large portion of the screen.
▶ Depending on the particular broadcast, it might be necessary to make changes to Channel and Field.
When you have finished, press the button to close the ‘Menu’ screen.
N O T E
▶ Different Channel and Field display different information :
Field 2 carries additional information that supplements the information in Field 1.(for example, Channel 1
may have subtitles in English, while Channel 2 has subtitles in Spanish.)
Using the Parental
The Parental feature automatically locks out programming that is deemed inappropriate
for childern. The user must enter a PIN(Personal Id Number) before any of the Parental
restriction can be changed.
N O T E
▶ The Parental feature dose not work with PC signals.
Setting Up Your PIN (Personal ID Number)
1 Press the button on the remote control.
2 Press the <
> button on the remote control to navigate to the ‘SET UP’ menu.
To Configure the SET UP
2-33
Using the LCD TV
3 Press the <
4 Press the <
> button on the remote control to navigate to the ‘Parental’ submenu.
> button. The ‘Enter the Password : ----’ screen is displayed.
5 Enter 4-digit PIN number.
N O T E
▶ The default PIN number for a new set is ‘1-1-1-1’.
2-34
To Configure the SET UP
Using the LCD TV
6 After entering a valid PIN number, the ‘Parental’ menu screen will appear.
Press the <
> buttons to select ‘Set Password’.
7 When you have finished, press the button to colse the ‘Menu’ screen.
How to On/Off the Parental
1 Press the button on the remote control.
2 Press the <
> button on the remote control to navigate to the ‘SET UP’ menu.
3 Press the <
> button on the remote control to navigate to the ‘Parental’ submenu.
To Configure the SET UP
2-35
Using the LCD TV
4 Press the <
> button. The ‘Enter the Password : ----’ screen is displayed.
5 Enter 4-digit PIN number.
6 After entering a valid PIN number, the Parental menu is displayed and the Parental
Lock will be highlighted.
To On or Off the Parental feature, press the <
Lock On/Off.
> buttons to select Parental
7 When you have finished, press the button to colse the ‘Menu’ screen.
How to Setup Restriction Using the MPAA
1 Press the button on the remote control.
2-36
2 Press the <
> button on the remote control to navigate to the ‘Setup’ menu.
3 Press the <
> button on the remote control to navigate to the ‘Parental’ submenu.
To Configure the SET UP
Using the LCD TV
4 Press the <
> button. The ‘Enter the Password : ----’ screen is displayed.
5 Enter 4-digit PIN number.
6 After entering a valid PIN number, the Parental sub menu screen will appear.
Press the <
7 Press the <
The <
> buttons to move to ‘MPAA’ sub menu.
> buttons to select particular MPAA category.
> buttons will cycle through the MPAA categories.
- G & Above : General audience (no restrictions).
- PG & Above : Parental guidance suggested.
- PG-13 & Above : Parents strongly cautioned.
- R & Above : Restricted. Children under 17 should be accompanied by an adult.
- NC-17 & Above : No Children under age 17.
- X : Adults only
- Unblocked : Not rated
8 When you have finished, press the button to colse the ‘Menu’ screen.
N O T E
▶ The Parental will automatically block any category that is ‘More restrictive’. For example, if you block the
PG-13 & Above category, then R & Above, NC-17 & Above, and X will be automatically blocked also.
To Configure the SET UP
2-37
Using the LCD TV
How to Setup Restriction Using the TV Guidelines
1 Press the button on the remote control.
2 Press the <
> button on the remote control to navigate to the ‘Setup’ menu.
3 Press the <
> button on the remote control to navigate to the ‘Parental’ submenu.
4 Press the <
> button. The ‘Enter the Password : ----’ screen is displayed.
5 Enter 4-digit PIN number.
6 After entering a valid PIN number, the Parental sub menu screen will appear.
Press the <
> buttons to select ‘TV Guidelines’.
7 Press the <
and press the <
> buttons to move to one of the six age-based categories in column
> buttons will cycle through the MPAA categories.
- TV-Y : Young Children
- TV-Y7 : Children 7 and Over
- TV-G : General audience
- TV-PG : Parental guidance
- TV-14 : Viewers 14 and Over
- TV-MA : Mature audience
2-38
To Configure the SET UP
Using the LCD TV
For example, if you block TV-Y category, then TV-Y7 will be automatically blocked.
Similarly, if you block TV-G category, then all the categories in the ‘young adult’ will
be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (FV, V, S, L, D) work
together similarly. (See step 8)
8 To set the FV, D, L, S and V sub-ratings, first select one of these TV-Ratings :
TV-Y7, TV-PG, TV-14 and TV-MA (See step 7).
Next, while the TV-Ratings is selected, repeatedly press the < > button.
This will cycle through the available sub-ratings (FV, D, L, S or V).
Press the button to change the sub-ratings.
N O T E
▶ These categories consist of two separate groups :
TV-Y and TV-Y7(Young Children through age 7), and TV-G through TV-MA(everybody else).
▶ The restrictions for these two groups work independently :
If a household includes very young children as well as young adults, the TV guidelines must be set
separately for each group.
▶ The TV-Y7, TV-PG, TV-14 and TV-MA have additional options.
- : All
FV : Fantasy Violence
V : Violence
S : Sexual Situation
L : Adult Language
D : Sexual Suggestive Dialog
N O T E
▶ The Parental will automatically block certain categories that are ‘More restrictive’.
For example, if you block ‘L’ sub-rating in TV-PG, then the ‘L’ sub-rating in TV-14 and TV-MA will be
automatically blocked.
9 When you have finished, press the button to colse the ‘Menu’ screen.
To Configure the SET UP
2-39
1
Connect the RS-232C input jack to an external control device (such as a computer or an A/V
control system) and control the Monitor’s functions externally.
Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.
RS-232C connection cables are not supplied with the Monitor.
N O T E
▶ Type of Connector : D-Sub 9-pin Male
No.
2-40
Pin Name
No Connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
External Control Device Setup
Using the LCD TV
N O T E
▶ RS-232C Configurations
7-Wire Configuration
(Standard RS-232C cable)
3-Wire Configuration
(Not standard)
Set ID
- Use this function to specify a monitor ID number.
- Refer to ‘Real Data Mapping 1’.
Press the button and then use the ▲/▼ button to select the SPECIAL menu.
Press the ▶ button and then use ▲/▼ button to select Set ID.
Press the ▶ button and then use ◀/▶ button to adjust Set ID.to choose the desired
monitor ID number.
• The adjustment range of Set ID. is 0 ~ 99.
Communication Parameters
- Baud rate : 9600 bps (UART)
- Data length : 8 bits
- Parity : None
- Stop bit : 1 bit
- Communication code : ASCII code
External Control Device Setup
2-41
Using the LCD TV
Command Reference List
COMMAND 1
COMMAND 2
DATA(Hexadecimal)
0~1
0~7
0~1
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0~4
0~3
0 ~ 14
0 ~ 14
0 ~ 64
0~3
0 ~ C8
0 ~ C8
0 ~ C8
0~7
Power
Input Select
Volume Mute
Volume Control
Contrast
Brightness
Color
Tint
Sharpness
PIP/POP/PBP
PIP Position
Treble
Bass
Balance
Color Temperature
Red Adjustment
Green Adjustment
Blue Adjustment
PIP Input Source
• Menu doesn’t display on screen when setting the 4, 12, 13, and 26 ~ 32.
2-42
External Control Device Setup
Using the LCD TV
N O T E
▶ Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : k,
[Command 2] : To control LCD set.
[Set ID] : You can adjust the set ID to choose desired moni-tor ID number in Special menu. Adjustment
range is 0 ~ 99. When selecting Set ID ‘0’, every connected LCD set is controlled. Set ID is
indicated as decimal (0~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving
protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
▶ OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns
the data of the PC computer.
▶ Error Acknowledgement
[Command2][ ][Set ID][ ][NG][x]
The Monitor transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data
1 : Illegal Code
2 : Not supported function
3 : Wait more time
Power (Command2 : a)
● To control Power On/Off of the Monitor.
- Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data
0 : Power Off
1 : Power On
- Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
External Control Device Setup
2-43
Using the LCD TV
● To show Power On/Off.
- Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Data
0 : Power Off
1 : Power On
- Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
In a like manner, if other functions transmit ‘FF’ data based on this format,
Acknowledgement data feedback presents status about each function.
Input Select (Command2 : b) (Main Picture Input)
● To select input source for the Monitor. You can also select an input source using the
INPUTSELECT button on the Monitor’s remote control.
- Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data
0 : TV
3 : AV3
6 : RGB
1 : AV1
4 : COMPONENT1
7 : DVI
2 : AV2
5 : COMPONENT2
- Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Volume Mute (Command2 : e)
● To control volume mute on/off. You can also adjust mute using the MUTE button on
remote control.
- Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
- Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
2-44
External Control Device Setup
Using the LCD TV
Volume Control (Command2 : f)
● To adjust volume. You can also adjust volume with the volume buttons on remote control.
- Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min : 0 ~ Max : 64
Refer to ‘Real data mapping1’ as shown below.
- Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Contrast (Command2 : g)
● To adjust screen contrast. You can also adjust contrast in the Video menu.
- Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min : 0 ~ Max : 64
Refer to ‘Real data mapping1’ as shown below.
- Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Real data mapping 1
0 : Step 0
⋯
A : Step 10 (SET ID 10)
⋯
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
⋯
64 : Step 100
Brightness (Command2 : h)
● To adjust screen brightness. You can also adjust brightness in the Video menu.
- Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
External Control Device Setup
2-45
Using the LCD TV
Color (Command2 : i)
● To adjust the screen color. You can also adjust color in the Video menu.
- Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Tint (Command2 : j)
● To adjust the screen tint. You can also adjust tint in the Video menu.
- Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Red : 0 ~ Green : 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Sharpness (Command2 : k)
● To adjust the screen sharpness. You can also adjust sharpness in the Video menu.
- Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
2-46
External Control Device Setup
Using the LCD TV
PIP/POP/PBP (Command2 : n)
● To control the PIP (Picture-in-Picture) or Twin Picture. You can also control the
PIP/Twin picture mode using the PIP or TWIN PICTURE button on the remote
control or in the Twin menu.
- Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data
0 : PIP OFF
2 : POP
1 : PIP
3 : PBP1
4 : PBP2
- Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
PIP Position (Command2 : q)
● To select sub picture position for PIP. You can also adjust the sub picture position using
Win.position on the remote control or in the Twin menu.
- Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data
0: Right down on screen
1: Left down on screen
2: Left up on screen
3: Right up on screen
- Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Treble (Command2 : r)
● To adjust treble. You can also adjust treble in the Audio menu.
- Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data
Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
(Operates only when SSM is set to USER.)
External Control Device Setup
2-47
Using the LCD TV
Bass (Command2 : s)
● To adjust bass. You can also adjust bass in the Audio menu.
- Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data
Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
(Operates only when SSM is set to USER.)
Balance (Command2 : t)
● To adjust balance. You can also adjust balance in the Audio menu.
- Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Color Temperature (Command2 : u)
● To adjust color temperature. You can also adjust CSM in the PC menu.
- Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data
0: Normal
2: Warm
1: Cool
3: User
- Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
2-48
External Control Device Setup
Using the LCD TV
Red Adjustment (Command2 : v)
● To adjust red in color temperature.(Operates only when CSM is set to USER.)
- Transmission
[k][v][ ][Set ID][ ][Data][Cr]
Data
0 ~ FF
- Acknowledgement
[v][ ][Set ID][ ][OK][Data][x]
Green Adjustment (Command2 : w)
● To adjust green in color temperature.(Operates only when CSM is set to USER.)
- Transmission
[k][w][ ][Set ID][ ][Data][Cr]
Data
0 ~ FF
- Acknowledgement
[w][ ][Set ID][ ][OK][Data][x]
Blue Adjustment (Command2 : $)
● To adjust blue in color temperature.(Operates only when CSM is set to USER.)
- Transmission
[k][$][ ][Set ID][ ][Data][Cr]
Data
0 ~ FF
- Acknowledgement
[$][ ][Set ID][ ][OK][Data][x]
PIP Input Select (Command2 : y)
● To select input source for sub picture in PIP mode.
- Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data
0 : TV
3 : AV3
6 : RGB
1 : AV1
4 : COMPONENT1
7 : DVI
2 : AV2
5 : COMPONENT2
- Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
External Control Device Setup
2-49
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.3
Linearized : No
Create Date : 2005:05:16 16:35:59
Producer : ezPDFGate with Acrobat Distiller
Author : ¹ÌÁø
Title : ¹ÌÁÖÇâTV ¸Å´º¾ó37Çü+42Çü_2Àåb77µ
Creator : QuarkXPress3.3K: LaserWriter 8 KH-8.7.1
Modify Date : 2005:05:16 16:40:09+09:00
Page Count : 49
EXIF Metadata provided by EXIF.tools
