ATI Electronics H35 Bluetooth headset User Manual H35 v022012 12 13

Download:
Mirror Download [FCC.gov]
Document ID	2233377
Application ID	Hu4d41XrHbHxq9VUkD/AAQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18kB (224960 bits)
Date Submitted	2014-04-03 00:00:00
Date Available	2014-04-03 00:00:00
Creation Date	2014-04-02 14:24:51
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-04-02 14:24:51
Document Title	Microsoft Word - H35 user manual_v022012-12-13
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

User manual
Bluetooth® Headset H35
-1-
1. Notice Before Using
Thank you for purchasing the Bluetooth® Headset H35.
Please read this User's Manual completely before you use
the Headset. The H35 has been developed using Bluetooth®
wireless technology and is capable of connecting with
Bluetooth® devices designed with Audio Gateway. PDAs,
Desktops and Notebook computers can be connected and
paired with the Headset using a USB Bluetooth® Dongle or
built‐in Bluetooth capability (if applicable). Before using the
Headset please verify your Bluetooth® device (Phone, PDA)
complies with Bluetooth® V1.1/V1.2/V2.0/V2.1 and supports
the Bluetooth® Headset or Hands‐free profile.
2. Package Contents List
-2-
Please inspect this package and refer to the package
contents list below to verify all items were included in this
package:
A. H35 Bluetooth® headset(Includes Ear hook) .................1
B. AC Charger.........................................................................1
C. USB Charging Cable...........................................................1
D. Extra Earpiece...................................................................1
E. Extra Ear cap......................................................................1
F. User's Manual....................................................................1
-3-
3. H35 Bluetooth® Headset Overview
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Ear hook
On/Off
Speaker
Ear cap
Volume(+)
Volume(‐)
Dual‐color indicator
Microphone
Charging socket
Ear cap(Extra)
-4-
4. Battery information
The device is equipped with an integrated lithium‐polymer
battery. The battery cannot be replaced. Do not attempt to
remove the battery from the device since it would damage
the device. The full performance of a new battery is not
achieved until after two or three complete
charging‐discharging cycles. The battery can be charged and
discharged several hundred times, but it looses its capacity
over time.
Disconnect the H35 from the power supply as soon as the
battery is fully charged, overcharging would reduce the
service life of the battery. A charged battery will lose its
capacity if it is not used on a regular basis.
Important: Ensure that the battery is fully charged if you do
not use the device for a long period of time. To avoid a
complete discharge of the battery, the H35 should be
charged at least every 3 months.
-5-
5. Charging the battery
The H35 is operated with a rechargeable battery. Charge the
battery completely before its first use. Read the section
"Battery information" before starting the charging process.
1) Connect USB cable to the AC charger.
2)
When the charger is connected to the headset, the red
indicator light will turn on. Charging the battery fully
may take up to 2 hour.
3) When the battery is fully charged, the red indicator
light will turn blue. Disconnect the charger from the
headset and the outlet. The headset is ready to use.
NOTE:
-6-
‐ For first time use, please charge the headset fully.
‐ The fully charged battery has power for up to 5 hours of
talk‐time , and up to 120 hours of standby time. However,
the talk and standby times may vary when used with
different mobile phones or other compatible Bluetooth®
devices, usage settings, usage styles, and environments.
When the battery power is low, the headset will remind you
by a "Beep" tone every 20 seconds, and the red indicator
light starts to flash.
6. Pair to your Bluetooth® phone
Before you use your headset the first time, you must pair
the unit with a Bluetooth® enabled mobile phone. Pairing is
a one‐time process and required only for the first
connection with the cell phone The H35 can be paired with
up to eight cell phones and be connected simultaneously
with two cell phones.
1) Keep the H35 within range of a Bluetooth®‐ready cell
-7-
2)
3)
4)
5)
6)
phone; the distance should not exceed a meter.
The headset must be turned off.
Hold the On/Off button for approx. 5 seconds until you
hear a short‐low signal tone and the indicator light
intermittently flashes red and blue. The device is in
pairing mode. Pairing mode should engage
automatically upon the first time turning on the
headset.
Find the Bluetooth® setting of your cell phone and
start the search for Bluetooth® devices. (For further
details, please read the operating instructions of your
cell phone).
From the list of devices found, select the "H35".
If required, enter the PIN code "0000" and confirm the
entry. If the pairing process was successful, you will
hear a signal tone and the indicator lights blue for 3
seconds. (Note: The PIN code is preprogrammed and
-8-
cannot be changed.)
After pairing, the H35 automatically connect with the
cell phone. For some cell phones, you have to
manually confirm the connection. Once paired, the
headset will change to standby mode and the indicator
light will flash blue 2 times every 5 seconds.
Note: If pairing is not completed within 2 minutes, the
headset will turn off. If this happens, repeat the pairing
process.
7)
7. Multi‐connection function
The multi‐connection function allows for the simultaneous
use of the H35 with two cell phones. This is an advantage
for users with a personal and a business cell phone.
Establishing a connection with two cell phones
There are several options of connecting the H35 with
already paired cell phones.
1) Automatic connection
-9-
When turning on the H35, a connection is automatically
established with the two most recently connected cell
phones.
2) Establishing a connection via the H35
To manually establish a connection between the H35 and
the two most recently connected cell phones, press the
On/Off button. The H35 first connects itself with the most
recently connected cell phone. Then it connects itself with
the next most recently connected one.
3) Establishing a connection via the cell phone
If the cell phone is not one of the two most recently
connected cell phones with the H35, you have to establish
the connection via the Bluetooth® menu of the cell phone.
After successful connection, you can establish another
connection with a second cell phone. This allows you to
determine the sequence of connections. If two cell phones
are connected with the H35, the cell phone connected first
- 10 -
is the first device and the other one the second device.
Another connection can be established only after first
disconnecting one of the two cell phones. The cell phone
that is still connected afterwards becomes the first device in
the sequence.
Note that voice dialing is available only for the first device
and the operation for redialing the last number differs for
the first and the second device. The other functions are
executed the same way using the H35 as a connection with
only one cell phone.
8. Turning headset on /off
Turning on your headset
Press and hold On/Off for 3 seconds until you hear a tone
from low to high. The headset is now on. The Blue indicator
light will flash blue 3 times.
Connecting to a Bluetooth® phone
If your headset has completed the pairing process
- 11 -
successfully, when the headset is turned on, it will connect
to the phone you last connected with automatically. Please
ensure your phone's Bluetooth® function is active.
Turning off the headset
At any working state after the headset is powered on, press
and hold On/Off for 5 seconds. You will hear a tone from
high to low, and the Red indicator light will flash red 3 times.
The headset has now powered off.
Note:
To conserve power, if the headset is not connected to a
device for approximately 10 minutes,
the headset will turn off automatically.
9. Wearing your headset
According to your preference, you can
wear the headset on your left or right
ear. The adjustable head strap design
- 12 -
allows for a comfortable fit
10. Using the H35
Making a call
1) Using phone's keypad
In standby mode, dial the number on your phone's keypad
to make a call.
2) Use Voice‐Dialing
In standby mode, press the On/Off shortly, you will hear a
short tone from the headset, and the phone will prompt
you to say the voice tag which you have already attached to
your contact. If the voice tag is identified by the phone, the
related number will be dialed. Please ensure that your
mobile phone supports this voice dialing function, and voice
tags have been set up on your mobile phone prior to
attempting this. Refer to your mobile phone's user guide or
contact your service provider.
- 13 -
Note: the voice dialing is available only for the first device if
two cell phones are connected.
3) Last number re‐dialing
In standby mode, double press the On/Off button, The last
number you dialed will be re‐dialed.
Note: If two cell phones are connected with the H35, hold
the Volume (‐) button for 2 seconds to dial the last number
of the cell phone connected previously.
Answering a call
When you receive an incoming call, press the On/Off button
shortly to answer the incoming call; you can also answer
the call directly from your phone.
Reject an incoming call
When you receive an incoming call, press and hold On/Off
button for 3 seconds to reject the incoming call.
Transferring a call
While a call is in progress, press and hold Volume (+) for 3
- 14 -
seconds. The call will be transferred from your phone to
your headset. Repeating the operation can transfer the call
from your headset back to your phone.
Ending a call
While on a call, press the On/Off button shortly to end the
call; you can also end the call directly from your phone.
Call‐waiting (Three‐Way Calling)
Before using the Call‐Waiting function on your headset,
please ensure that your phone supports this Hands‐free
profile and you have access to the service by a wireless
provider.
‐ If there is an incoming call while a call is in progress, press
On/Off shortly. This will accept the waiting call and end
current calling.
‐ If there is an incoming call while a call is in progress, press
and hold On/Off for 3 seconds to accept the incoming call
and place the current call on hold.
- 15 -
‐ While a call is on hold and you are engaged in an
additional call, press On/Off shortly to end the current call
and resume the call holding.
‐ While a call is on hold and you are engaged in an
additional call, press and hold On/Off for 3 seconds to shift
the current call to hold and connect you with the previously
held call.
‐ While you are engaged in one call with another call on
hold, press Volume (+) button to add the held call to the
current conversation to make a three‐way call.
‐ While you engaged in a three‐way call, double press
On/Off to end all calls.
Volume control
While on a call, you can adjust the volume by pressing the
Volume(+) and Volume(‐)button or you can adjust the
volume directly from your phone.
Mute
- 16 -
While a call is in progress press and hold Volume(‐) button,
for 2s, you will hear a tone from low to high. The headset's
MIC is now muted. You will hear a remindful tone every 10
seconds, notifying you that your MIC is still muted and a call
is still in progress. Repeat the operation and you will hear
the tone from high to low. The mute function is now
canceled.
Streaming music
The H35 supports A2DP profile that allows for wireless
streaming of stereo music from a phone or other Bluetooth
enabled music device. For stereo listening please connect
the extra earpiece. The music will pause automatically while
a call is dialed out/incoming, and resume when the
conversation has ended.
11. Safety and general information
1)
Please read this User's Manual carefully and follow all
instructions.
- 17 -
2)
3)
4)
5)
6)
7)
8)
To avoid any damage or malfunction of the device do
not drop the device from high places.
Keep device away from humidity, water and any other
liquid. If the device is exposed to water, moisture and
other liquids do not operate it to avoid any electrical
shock, explosion and damage to the device or yourself.
Do not place or keep this device near any heat sources,
such as, direct sunlight, radiators, stoves or other
apparatus that produce heat. This may cause an
explosion, degrade the performance and/or reduce
battery life.
Do not modify, repair or disassemble device (Especially
the battery). Doing this will void the warranty.
Do not place heavy objects on the device.
Use only the supplied and approved chargers.
Please contact the retailer for replacement or support
with this product.
- 18 -
9)
Unplug this device when unused for long periods of
time or during lightening storms.
10) The battery used in this device may present a risk of
fire or chemical burn if mistreated.
12. FCC & IC Statement
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV interference, caused
by unauthorized modifications to this equipment. Such
modifications could void the user's authority to operate the
equipment.
13. EC Declaration of Conformity
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
- 19 -
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV interference, caused
by unauthorized modifications to this equipment.
Such modifications could void the user's authority to
operate the equipment. This product is CE certified
according to the provision of the R&TTE Directive (99/5/EC).
This declares that this product is in compliance with the
essential requirements and other relevant provisions of
Directive 1999/5/EC. Please note that this product uses radio
frequency bands not harmonized within EU.
Within the EU this product is intended to be used in Austria,
Belgium, Denmark, Finland, France, Germany, Greece,
Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain,
Sweden, and United Kingdom and within EFTA in Iceland,
Norway and Switzerland.
- 20 -
14. Warranty
The condition of this warranty and supplier's responsibilities
under this warranty are as follows:
Warranty is non‐transferable and is limited to the original
purchaser only.
‐ You must be able to prove the date of original purchase of
the unit with a dated receipt.
‐ The warranty is not applicable if the product has been
subject to physical abuse, improper installation,
modification or repair by an unauthorized third party.
‐ Supplier's responsibility shall be limited to the repair or
replacement of the product at its sole discretion.
‐ Specifically exempt from any warranty are limited‐life
consumable components subject to normal wear and tear
such as batteries, decorates and other accessories.
‐ Supplier is not responsible, for failure resulting from
accident, abuse, misuse, or any unauthorized repair, or
- 21 -
modification.
‐ Modification and repair of the unit should be done by an
authorized and qualified service center or returned to the
manufacturer.
‐ This warranty gives you specific legal rights, and you may
also have other rights, which vary under local laws.
‐ To replace a defective device please contact customer
service . Visit our website for more information
Bluetooth® is a trademark owned by the Bluetooth® SIG, Inc.
- 22 -

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:04:02 14:24:51+08:00
Create Date                     : 2014:04:02 14:24:51+08:00
Format                          : application/pdf
Title                           : Microsoft Word - H35 user manual_v022012-12-13
Creator                         : Administrator
Document ID                     : uuid:c95f6229-7734-452a-ae4d-899327a86b2d
Instance ID                     : uuid:838ea107-68bf-4bd0-b12c-0835229b0b74
Page Count                      : 22
Author                          : Administrator

EXIF Metadata provided by EXIF.tools