ATI Electronics SH805B Bluetooth headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2370971
Application ID	EpV7+8V1oJHcawYqw1XXOw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.22kB (152797 bits)
Date Submitted	2014-08-27 00:00:00
Date Available	2014-08-27 00:00:00
Creation Date	2014-08-25 20:12:25
Producing Software	Adobe PDF Library 10.0
Document Lastmod	2014-08-25 23:47:16
Document Title	Users Manual
Document Creator	Acrobat PDFMaker 10.1 Word 版
Document Author:	Jerry

Bluetooth Stereo Earphones
Operation Manual
Thank you for purchasing theSH805B Bluetooth Stereo
Earphones. Please read all instructions carefully before
using and retain this manual for future use and
reference.
PACKAGE CONTENTS
. Bluetooth Stereo Earphones
. USB Charging Cable
. 2 Extra Sets of Ear Cushions
. Operation Manual
KEY FEATURES
. Compatible with Bluetooth-enabled devices
. Built-in rechargeable battery
. Volume control
SAFETY INSTRUCTIONS
Keep the unit away from heat sources. Direct sunlight，
humidity，water and any other liquids.
Do not operate the unit of it has been exposed to water,
moisture or any other liquids to prevent against electric
shock, explosion and/or injury to yourself and damage
to the unit.
Do not use the unit if it has been dropped or damaged
in any way.
Repairs to electrical equipment should only be
performed by a qualified electrician. Improper repairs
may place the user at serious risk.
Do not puncture or harm the exterior surface of the
product in any way.
Keep the unit free from dust. lint. etc.
Do not use this unit for anything other than its intended
use or purpose. Doing so may damage the device.
This product is not a toy. Keep out of reach of children.
Do not use the headset at excessive levels as this may
damage hearing.
Do not expose batteries, battery pack, or batteries to
installed to excessive heat, such as direct sunlight or
open flame.
FEATURES/PARTS
I . Power On/Off
Multifunction Button Answer
/End Cal
2. Indicator LED
3. Volume Up/Next Track
4. Volume Down/Previous Track
5. Charging Port
6. Microphone
CHARGING THE EARPHONES
The earphones come with a built-in rechargeable
battery. Before using it for the first time, we recommend
you charge the battery fully. Only use the supplied USB
cable to charge the headphones.
Connect the USB cable to a computer USB port and the
USB plug to the charging jack of the headset. The red
LED light will illuminate while the earphones are
charging A full charge of the battery takes around 2
hours. When the battery is fully charged, the LED light
will turn blue.
Disconnect the headset at this point. The headset will
then be ready for use.
When the battery is low, the LED will flash red and emit
three tones every 20 seconds. When this occurs, please
recharge the headset.
When using your earphones with an iPhone, the top
right corner will indicate your ear bud's battery life.
VOICE PROMPT
The ear buds will notify you of status by speaking
“Power On", “Power Off", And “Pairing Successful" when
applicable.
TURNING HEADSET ON/OFF
Power On: Press and hold the Power On/Off button for
3seconds until the LED flashes blue.
Power Off: Press and hold the Power On/Off button for
5seconds until the LED flashes red.
In order to save power, the headset will automatically
turn off if not paired with a device after 10 minutes.
PAIRING THE EARPHONES
1 . Ensure the earphones are turned off. If they are not,
please turn off the earphones first before pairing.
2. Press and hold the Power On/Off button for
5-7seconds until the LED flashes red and blue. This will
indicate your earphones are now in pairing mode.
3. Place the earphones and the Bluetooth device to
which you would like to pair it within the operating
distance. We recommend keeping the two devices no
further than 3 feet apart.
4. Ensure Bluetooth is enabled on your phone or music
device. Refer to the manufacturer's instructions for how
to enable Bluetooth on ,/our device.
5. Once you have activated Bluetooth on your device,
select the earphones 'BTEARBUDS' from the list of
available Bluetooth devices.
6. Please note, pairing mode on the earphones will ast
for two minutes. If no devices are paired after two
minutes, the earphones will automatically switch off.
7. If pairing is unsuccessful, turn off the earphones first
and repair following the aforementioned steps. Once
you have paired the earphones with a device. The
earphones will remember this device and will pair
automatically when the device's Bluetooth is activated
and in range. You do not need to re-pair any previously
connected devices.
Your earphones can pair up to two multi-point devices.
You can reconnect a previously paired device without
going through the pairing or PIN process on up to two
devices.
During use, the battery life of your earphones is visible
on your iPhone or iPad screen.
LISTENING TO MUSIC
Once the earphones are paired to your device, you can
stream music wirelessly to the earphones. Select the
track you wish to listen to on your device to listen via
earphones. Should you encounter any problems while
streaming, please refer to your device's user manual.
MANUAL KEY FUNCTIONS
Your earphones are equipped with a few shortcut keys.
Please note the following functions.
1. Increase Volume: Press the Vol + Button once
2. Decrease Volume: Press the Vol - Button once
3. Play/Pause: Press the Multifunction Button
4. Previous Track: Press and hold the Vol - Button
5. Next Track: Press and hold the Vol + Button
CARE AND MAINTENANCE
. Do not expose the headset to liquid, moisture, or
humidity to avoid damage to the product's intimal
circuitry.
. Do not use abrasive cleaning solvents to dean the
unit.
. Do not expose the headset to extremely high or low
temperatures as this will shorten the life of the
electronic device, destroy the battery, and/or distort
certain plastic parts.
. Do not dispose of the earphones in fire as they may
explode or combust.
. Do not expose the headset to contact with sharp
objects as this will cause scratches and damage
. Do not let the earphones fall from high places. as
doing so may damage the internal circuitry.
. Do not attempt to disassemble the earphones. In the
event that the earphones do not function properly
return it to the store where it was purchased.
SPECIFICATIONS
Bluetooth:V3.0 + EDR, Class II
Bluetooth Profiles: HSP, HFP, A2DP and AVRCP
Operating Distance: Up to 33ft (10 m)
Play Time: Up to 4 Hours
Talk Time: Up to 5 Hours
Standby Time: Up to 50 Hours
Charging Input: DC 5V. -140mA
Charging Time: ~2 Hours
1. FCC Statement
This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV interference,
caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to
operate the equipment.
Warranty
The condition of this warranty and supplier's
responsibilities under this warrant/ are as follows:
Warranty is non-transferable and is limited to the
original purchaser only.
- You must be able to prove the date of original
purchase of the unit with a dated receipt.
- Supplier's responsibility shall be limited to there pair
or replacement of the product at if’s sole discretion.
- Specifically exempt from any warranty are limited-life
consumable components subject to normal wear and
tear such as batteries, decorates and other accessories.
- Supplier is not responsible, for failure resulting from
accident, abuse, misuse, or any unauthorized repair or
modification.
- Modification and repair of the unit should be done by
an authorized and qualified service center or returned
to the manufacturer.
- This warranty gives you specific legal rights, and you
may also have other rights, which vary under local laws.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Jerry
Create Date                     : 2014:08:25 20:12:25+08:00
Modify Date                     : 2014:08:25 23:47:16+08:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:08:25 23:47:16+08:00
Creator Tool                    : Acrobat PDFMaker 10.1 Word 版
Document ID                     : uuid:2f793346-9b2a-426a-bc67-a35ca0b31038
Instance ID                     : uuid:0a5a9c05-be8f-41ae-906a-27792f8ab5bc
Subject                         : 3
Format                          : application/pdf
Creator                         : Jerry
Producer                        : Adobe PDF Library 10.0
Source Modified                 : D:20140825121141
Company                         : 微软中国
KSO Product Build Ver           : 2052-9.1.0.4468
Page Layout                     : OneColumn
Page Count                      : 16

EXIF Metadata provided by EXIF.tools