ATI Electronics SH827 Bluetooth Earphones User Manual

ATI Electronics (Shenzhen) Co. Ltd Bluetooth Earphones

User Manual

Download: ATI Electronics SH827 Bluetooth Earphones User Manual
Mirror Download [FCC.gov]ATI Electronics SH827 Bluetooth Earphones User Manual
Document ID3348808
Application IDNHFe+CuVLSjSCoWcikfK+g==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize26.06kB (325754 bits)
Date Submitted2017-04-07 00:00:00
Date Available2017-04-07 00:00:00
Creation Date2017-03-24 09:45:29
Producing SoftwareAdobe PDF library 15.00
Document Lastmod2017-04-06 16:04:40
Document Title快速指南_MZX399_77-007-01013_SO201703024
Document CreatorAdobe Illustrator CC 2015 (Windows)

WATERPROOF
Quick Start Guide
Item # MZX399
IN-EAR EARPHONES
1. Make sure the following items are
included in your package.
① Earloop
USB Cable
3. Charging: When charging, a red LED light will illuminate. When the battery is
fully charged, the red indicator light will turn off. Your earphones can
take up to two hours to fully charge.
2. For a look at the various buttons and parts of your earphones,
view the graphic below.
② Free Bit Ear Tips
③ LED Indicator Light
④ Charging Port
⑤ Volume +/Next Track
Indicater
⑥ Power/Answer
Ear Caps
⑦ Volume –/Previous Track
⑧ Microphone
4. Powering ON/Powering OFF Your Earphones:
-Press and hold the Power button for approximately 3-5 seconds to power on
your earphones. Your earphones will automatically connect with the last
phone they were paired with if they have previously been paired.
-Once powered on, you can press and hold the Power button again for
approximately three seconds to power off your earphones.
NOTE: In order to save power, your
earphones will automatically power
off if left unpaired and idle for
several minutes.
5. Pairing Your Earphones With a Bluetooth Phone
-To power on your earphones, press and hold the Power button for
approximately 3-5 seconds. Once powered on, you will hear your
earphones audibly say "Powering on, welcome to ALTEC
LANSING".
12:12 PM
Bluetooth
-Immediately after powering on your earphones, the LED Indicator
Light will alternately flash red and blue to indicate that your
earphones are ready to be paired.
Bluetooth
~3-5 Seconds
~3 Seconds
6. Wearing Your Earphones
For the best sound performance and a secure, comfortable fit, be sure that
the ear buds rest gently in your ear and drape around the back of your neck.
Use the ear caps that works best for you.
ON
Devices
-Go to the Bluetooth Manager on your phone.
Search Bluetooth devices and select "Altec Sport" to start
connecting. Once paired, the LED Indicator Light will slowly flash
blue every few seconds.
Altec Sport
Paired
Now discoverable
7. Listening to Music
8. Using Your Earphones During Phone Calls
Play/Pause
Press the Power button to get music from your audio source to play or pause.
Last Number Redialing
Quickly tap on the Answer button twice and the last number that you dialed will
be redialed.
Next/Previous Song
Press and hold the Volume Up or Volume Down buttons to advance to the
next song or go back to the previous one.
Increase/Decrease Volume
Repeatedly tap the Volume Up or Volume
Down buttons to increase or decrease the
volume.
NOTE: Music will automatically pause when
a call is dialed out or when there is
an incoming call. It will resume when
the call ends.
Answering an Incoming Call
To answer an incoming call, quickly press the Answer button.
Ending a Call
To end a call, quickly press the Answer button.
Reject an Incoming Call
Press and hold the ANSWER button for a few
seconds to reject an incoming call.
Adjusting Volume
By pressing the Volume Up or Volume Down
buttons you can increase or decrease the
volume of the phone call.
WATERPROOF
Quick Start Guide
Item # MZX399
IN-EAR EARPHONES
Care & Maintenance
- Before using your earphones, inspect inspect them carefully to make sure that
they are clear of dust and debris before charging.
- Use a soft cloth to clean your earphones. Never use any harsh chemicals or
detergents. Make sure your earphones are dry before charging.
- When your earphones are not in use, They should be stored in a cool, dry place.
- Never tug or yank on the cables. Doing so can damage your earphones.
- Never expose your earphones to high temperatures, or extreme cold.
- Give your ears a break. Do not listen to your earphones at high volumes for
extended periods of time.
- If exposed to salt water, rinse your earphones with tap water to maintain proper
long term performance.
- Please recycle or dispose of your earphones properly based on the laws and
rules of your municipality. Contact local recycling facilities and/or the
manufacturer of your earphones for further information.
Important Safety Precautions & Battery Information
1. Do not allow children or the infirm to play with your earphones without adult supervision.
2. Do not expose your earphones to excessive heat, flames or fire.
3. Always press all buttons carefully. Do not manhandle your earphones.
4. Do not use in extremely dry environments, as this can lead to static discharge during
usage.
5. Do not expose your earphones to temperatures above 40°C. Keep out of direct sunlight.
6. Do not attempt to repair this product yourself. Contact a qualified service center if your
earphones are in need of service.
7. Do not drop, puncture or expose your earphones to excessive trauma.
8. Your earphones are not intended for commercial use.
9. Do not place near objects that generate a strong magnetic field.
10. Do not charge during lightning storms.
11. The device is equipped with an integrated lithium-polymer battery. The battery cannot be
replaced. Do not attempt to remove the battery from the device.
12. The battery used in this device may present a risk of fire or chemical burn if mistreated.
Altec Lansing One Year Warranty Card
This warranty covers the original consumer purchaser only and is not transferable.
This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired
or replaced at no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to,
repair by unauthorized parties, tampering, modification or accident.
To Obtain Warranty Service and Troubleshooting information:
Call 1-855-292-4087 or Visit our website at www.alteclansing.com.
To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem
determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable
Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along
with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not
include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be
returned unrepaired.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANT-ABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL
APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO
OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL
BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR'S
SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR, ITS MANUFACTURERS,
OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL
DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY
THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.
NOTWITHSTANDING THE FOREGOING, CONSUMER'S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE
PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on
warranties, so limitation or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that
vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies. This product is
manufactured, distributed and sold by SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not
sponsored, endorsed or approved this product.
SPECIF ICATIONS
Drivers: 7mm
Frequency range: 20Hz-20kHz
IP67
L EV EL 2 I N T E N S I T Y
WATER
PROOF
FREEBIT™
EARTIPS
6 HOURS OF
PLAYTIME
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference , and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Technical Support
For technical support issues please visit our website at www.alteclansing.com.
You can find manuals, software and FAQ's at the website. Can’t find what you
are looking for? Call 1-855-292-4087 to access our technical support
information on the phone.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates. Uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions.
May cause harmful interference to radio or -television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
__ Reorient or relocate the receiving antenna.
__ Increase the separation between the equipment and receiver.
__ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
__ Consult the dealer or experienced radio/ TV technician for help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:03:24 09:45:29+09:00
Creator                         : Adobe Illustrator CC 2015 (Windows)
Modify Date                     : 2017:04:06 16:04:40+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : 快速指南_MZX399_77-007-01013_SO201703024
Metadata Date                   : 2017:04:06 16:04:40+08:00
Creator Tool                    : Adobe Illustrator CC 2015 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 184
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 17250 bytes, use -b option to extract)
Instance ID                     : uuid:77b87856-b830-43c4-a58c-34885c1fcf69
Document ID                     : xmp.did:f31d47f9-e4f5-984d-b22b-f21842ad4f23
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:eae84d3d-1670-4c43-b3d9-8e6412b4e98e
Derived From Document ID        : xmp.did:2f3bb5ef-4d56-5b48-9de4-b96e7541912b
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : default
History Action                  : saved, saved
History Instance ID             : xmp.iid:07E38905BCA2E4118350CA689FD2107E, xmp.iid:f31d47f9-e4f5-984d-b22b-f21842ad4f23
History When                    : 2015:01:23 20:30:46-05:00, 2017:03:24 09:45:25+08:00
History Software Agent          : Adobe Illustrator CS5.1, Adobe Illustrator CC 2015 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference
Manifest Reference File Path    : E:\客户包装资料\Sakar\MZX399\共用MZX399_Photo\MZX399(SH827)_Photo_QSG.png, E:\客户包装资料\Sakar\MZX399\共用MZX399_Photo\MZX399(SH827)_Photo_QSG.png
Manifest Reference Document ID  : adobe:docid:photoshop:b61c849f-f504-11e6-8ff1-ad8d16d867a9, adobe:docid:photoshop:b61c849f-f504-11e6-8ff1-ad8d16d867a9
Manifest Reference Instance ID  : xmp.iid:97207ee6-d5f1-7140-866b-f181b518d8ea, xmp.iid:97207ee6-d5f1-7140-866b-f181b518d8ea
Ingredients File Path           : E:\客户包装资料\Sakar\MZX399\共用MZX399_Photo\MZX399(SH827)_Photo_QSG.png, E:\客户包装资料\Sakar\MZX399\共用MZX399_Photo\MZX399(SH827)_Photo_QSG.png
Ingredients Document ID         : adobe:docid:photoshop:b61c849f-f504-11e6-8ff1-ad8d16d867a9, adobe:docid:photoshop:b61c849f-f504-11e6-8ff1-ad8d16d867a9
Ingredients Instance ID         : xmp.iid:97207ee6-d5f1-7140-866b-f181b518d8ea, xmp.iid:97207ee6-d5f1-7140-866b-f181b518d8ea
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 622.098529
Max Page Size H                 : 443.108818
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, BaskervilleBT-Bold, BaskOldFace, NewBaskervilleStd-Black, BaskervilleOldFace, MyriadPro-Regular, ProximaNova-Regular, ProximaNova-Bold, ProximaNova-Black, SimHei, MicrosoftYaHei
Font Family                     : Arial, Baskerville BT, Baskerville Old Face, ITC New Baskerville Std, Baskerville-Old-Face, Myriad Pro, Proxima Nova, Proxima Nova, Proxima Nova, 黑体, 微软雅黑
Font Face                       : Regular, Bold, Regular, Blk, Regular, Regular, Regular, Bold, Black, Regular, Regular
Font Type                       : Open Type, TrueType, Open Type, Open Type, TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.20, mfgpctt-v4.5 Fri Jun 25 07:40:01 EDT 1999, Version 1.51, Version 2.001;PS 002.000;hotconv 1.0.38, Version 1.0 08-10-2002, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 1.001 2005, Version 1.000;PS 001.000;hotconv 1.0.38, Version 1.001 2005, Version 5.01, Version 6.02
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : arial.ttf, Baskerville BT Bold_1.ttf, BASKVILL.TTF, NewBaskervilleStd-Black.otf, Baskerville-Old-Face-Regular_3.ttf, MyriadPro-Regular_2.otf, Proxima Nova Reg.otf, ProximaNova-Bold.otf, Proxima Nova Black.otf, simhei.ttf, msyh.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Producer                        : Adobe PDF library 15.00
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SF4-SH827

Navigation menu