ATI Electronics SP048 Bluetooth Speaker User Manual usermanual

Download:
Mirror Download [FCC.gov]
Document ID	3633716
Application ID	KvPHRg7iB79h61DIUVLfBQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	110.63kB (1382889 bits)
Date Submitted	2017-11-09 00:00:00
Date Available	2017-11-09 00:00:00
Creation Date	2017-11-09 17:32:58
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2017-11-09 17:32:58
Document Title	Microsoft Word - usermanual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

W fifllfififi§$¥fiflfiafl
AT] Electronics (Shenzhen) Co.,LT
Vivitar° VM60013BT Bluetooth° Speaker
User Guide
Thank you for purchasing the Vivitar' VM60013BT Bluetooth' Speaker.
Introduction
With this speaker, you will enjoy listening to high quality music
wirelessly using Bluetooth“ technology. Easily connect to any mobile
device for both conversation and music listening. It also pairs with
other Bluetooth-enabled devices (Bluetooth V3.0+EDR specification
and HSP, HFP, AZDP and AVRCP profiles).
Specifications
0 Bluetooth Specification: V3.0+EDR
- Operation Frequency: 2.402—2.486Hz
0 Supported Profile: HSP, HFP, AZDP, AVRCP
- Operation Range: Up to 33 feet (10 meters)
- Talk Time: 4 hours
- Play Time: 2 hours
- Standby Time: 10 hours
0 Battery Type: 400mAh, 3.7V, Polymer Lithium Ion Battery
0 Charge Time: 2 Hours
In the Box
- Bluetooth" Speaker
- USB Charging Cable
0 User Manual
Safety Precautions
0 Please read this User Manual carefully and follow all instructions.
0 To avoid damage or malfunction of the speaker do not drop it from high
locations and/or on to hard surfaces, do not place heavy objects on it.
0 Keep speaker away from humidity, water and other liquids. If it does get
wet, do not operate as this may cause an electrical shock, explosion and
damage to the device or to the user.
- Do not place or keep this product near heat sources, such as direct
sunlight, radiators, stoves or any other apparatus that produces heat.
This may cause an explosion, degrade the performance and/or reduce
battery life.
- Do not modify, repair or disassemble device (especially the battery).
Doing so will void the warranty. The battery in this device may present a
risk of fire or chemical burns if misused or tampered with.
0 Use only supplied and manufacturer—approved chargers and unplug this
device when not in use for long periods of time or during lightning
storms.
FCC Statement
This device complies with the part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class 8 digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
EC Declaration of Conformity
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Note: The manufacturer is not responsible for ANY interference, for
example RADIO or TV interference, caused by unauthorized
modifications to this equipment. Such modifications could void
the user‘s authority to operate the equipment. This product is
CE certified according to the provision of the R&TTE Directive
(99/5/EC). This declares that this product is in compliance with
the essential requirements and other relevant provisions of
Directive 1999/5/EC. Please note that this product uses radio
frequency bands not harmonized within EU. Within the EU this
product is intended for use in Austria, Belgium, Denmark,
Finland, France, Germany, Greece, Ireland, ItaIy,Luxembourg, the
Netherlands, Portugal, Spain, Sweden, and United Kingdom and
within EFTA in Iceland, Norway and Switzerland.
Location of Controls
(DPower/PIay/Pause/Answer _'
® LED Indicator Light
® Microphone
@ Auxiliary Port
(5 Charging Port
Battery Information
The device is equipped with an integrated lithium-polymer battery. The
battery cannot be replaced. Do not attempt to remove the battery from
the device since it would damage the device. The full performance of a
new battery is not achieved until after two or three complete
charging-discharging cycles. The battery can be charged and discharged
several hundred times, but it loses its capacity over time.
Disconnect the VM60013BT from the power supply as soon as the battery
is fully charged, overcharging would reduce the service life of the battery.
A charged battery will lose its capacity if it is not used on a regular basis.
Important: Ensure that the battery is fully charged if the speaker is not
used for a long period of time, To avoid a complete
discharge of the battery, charge the speaker at least every
six months.
Charging Your Speaker
Your speaker has a built-in, rechargeable lithium-polymer battery. To
avoid damage, do not attempt to remove the battery. The full
performance of the battery is only achieved after two or three
charging-discharging cycles. Charge the battery fully before first use. In
order to charge the speaker's battery, follow the steps below:
1. Connect one end of the included USB charging cable to the charging
port on your speaker. Then plug the other end of the USB charging
cable into a USB port on your computer or a suitable power adapter
in order to recharge your speaker's internal rechargeable battery.
Note: The internal battery of your speaker takes approximately two
hours to charge when completely drained.
2. When the battery is charging, the LED indicator light will turn red.
The LED indicator light will turn off when your unit is fully charged.
Note: Overcharging could reduce the life of the battery. A charged
battery will lose its capacity if it is not used on a regular basis.
Powering Your Speaker On and OFF
1. Press and hold the "POWER" button for 3
seconds to power on your speakers If you have
already paired your speaker to your Bluetooth
device, it will automatically remain paired each 925
time you power on your speaker. xx
2. Press and hold the "POWER" button for 5
seconds to turn power off your speaker.
Note: Your speaker will automatically power off
when left idle for approximately ten
minutes.
Pairing Your Speaker with a Bluetooth Device 7_ A/
Your speaker can be paired with most Bluetooth
devices including iPads, iPhones, iPod Touches, and most
smartphones, laptops and tablets In order to pair your speaker with a
phone, follow the steps below:
1. Press and hold the "POWER" button for three seconds to turn on
your speaker. The LED indicator light will start flash blue and red
quickly. This indicates that your speaker is in pairing mode.
2. Go to the Bluetooth Manager of your Bluetooth device.
3. Search Bluetooth devices and select "vwater sp" to start connecting,
4. Enter "0000" if your device asks for the PIN code.
5. Once paired, the LED indicator light will blink blue once every five
seconds.
, Power
33
DC m Aux
rural;
\‘
Note: If pairing is not completed within ten minutes, the speaker will
power off. If this happens, please repeat the pairing steps above.
Listening to Music on Your Speaker 4/ Play/Pause
Play/Pause Button: Press to play or pause a track. as
Note: You can adjust volume and playback ,,
settings on your phone or connected audio ~
device. m
External Audio Input ‘
The VM60013BT has an AUX-IN port which can be used to connect an
additional audio source using the 3.5mm Auxiliary Cable. When an audio
source is plugged in using the 3.5mm Auxiliary '
Cable, any music playing on your speaker will \
pause and music playing from the plugged in . . l l
audio source will play instead. AuX|I|ary Port 5
Note: The VMGOOISBT supports the AZDP profile which allows stereo
music to stream from a Bluetooth phone. The music will pause
automatically if a call is incoming, and resume when the call has
ended.
Using Your Speaker during a Phone Call
last Number Re-dial: In standby mode, , Answer
press the ANSWER button twice to re-dial Q 7
the last number called. w- ,. Microphone
Answering a Call: Quickly press the / m ‘
ANSWER button to answer an incoming call. / é ‘
Reiect an Incoming Call: Press and hold the E ‘
ANSWER button for two seconds to reject
an incoming call.
Ending a Call: Quickly press the ANSWER button to end a call,
Warranty Information
This warranty is non-transferable and is limited only to the original
purchaser. The conditions of this warranty and supplier‘s responsibilities
under this warranty are as follows:
~ You must be able to prove the date of original purchase of the unit with
a dated receipt.
- The warranty is not applicable if the product has been subject to
physical abuse, improper installation, modification or repair by an
unauthorized third party.
- Supplier's responsibility shall be limited to the repair or replacement of
the product at its sole discretion.
0 Specifically exempt from any warranty are limited-life consumable
components subject to normal wear and tear such as batteries,
decorates and other accessories.
- Supplier is not responsible, for failure resulting from accident, abuse,
misuse, or any unauthorized repair, or modification.
- Modification and repair of the unit should be done by an authorized
and qualified service center or returned to the manufacturer.
- This warranty gives you specific legal rights, and you may also have
other rights, which vary under local laws.
What is Covered
This warranty covers for the original consumer purchaser only and is not
transferable. Products that fail to function properly UNDER NORMAL
USAGE, due to defects in material or workmanship will be repaired at no
charge for parts or labor for a period of one year from the time of
purchase.
What is NOT Covered
Damages or malfunctions not resulting from defects in material or
workmanship and damages or malfunctions from other than normal use,
including but limited to, repair by unauthorized parties, tampering,
modification or accidents.
Service and Returns
When returning a defective product (postage pre-paid) for service, the
package should include:
1. Copy of original bill of sale.
2. A detailed written description of the problem.
3. Your return address and telephone number (Daytime).
Where to send defective products
United States United Kingdom / Europe
Sakar International Sakar International
Attention: Service Department Attention: Service Department
195 Carter Drive 20, Siskin Parkway East
Edison, NJ 08817 4020 Middlemarch Business Park
Coventry, CV3 4$U
Australia
Return faulty device to the
Refund Counter at the store
where the product was purchased:
Technical Support
For technical support issues, visit our website at www.vivitar.com.
Manuals, software and FAQ's are available on line. If you can't find
what you are looking for, e-mail us at support@vivitar.com where one
of our technical support team members will help you. US phone:
1-800-592-9541; UK phone: 0800 917 4831; Australia phone:
1800-006-614. Telephone numbers from other countries can be found
at: www.vivitar.com.
EGO
KC ID SPA-S90“
VMG

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2017:11:09 17:32:58+08:00
Modify Date                     : 2017:11:09 17:32:58+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - usermanual
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:919d93c7-b357-4575-8dc0-eb74688fc08a
Instance ID                     : uuid:36ab6023-883d-4f10-b04e-4051a43b04f1
Page Count                      : 13

EXIF Metadata provided by EXIF.tools