ATI Electronics SP087 Bluetooth Speaker User Manual

ATI Electronics (Shenzhen) Co. Ltd Bluetooth Speaker

User Manual

Vivitar® VM175BT
Bluetooth® Speaker
User Guide
Thank you for purchasing the Vivitar® VM175BT
Bluetooth® Speaker.
Introducon
With this speaker, you will enjoy listening to high quality
music wirelessly using Bluetooth® technology. Easily
connect to any mobile device for both conversaon and
music listening. It also pairs with other Bluetooth-en-
abled devices (Bluetooth V4.1+EDR specificaon and
HSP, HFP, A2DP and AVRCP profiles).
Specificaons
• Bluetooth Specificaon: V4.1+EDR
• Operaon Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operaon Range: Up to 33 feet(10 meters)
• Talk Time: 4 hours
• Play Time: 2 hours
• Standby Time: 10 hours
• Baery Type: 400mAh, 3.7V, Polymer Lithium Ion
Baery
• Charge Time: 2 Hours
Important!
Ensure that the baery is fully charged if the speaker is
not used for a long period of me. To avoid a complete
discharge of the baery, charge the speaker at least
every six(6) months.
Baery Notes
• A fully charged baery provides up to four(4) hours of
talk-me, two(2) hours music playback, and up to
ten(10) hours of standby me. Talk and standby mes
vary depending on mobile phones or other
compable Bluetooth® devices, sengs, styles, etc.
• When the baery power is low, the speaker will beep
every 30 seconds.
• When using with your iPhone, an addional baery
meter feature will display the remaining baery on
your phone’s touch screen.
Pairing with your Phone
1. Place the speaker in close range of a Bluetooth®-en-
abled mobile phone.
2. Press and hold POWER buon for three(3) seconds.
Unl indicator lights flash blue and red.
3. Set your mobile phone to pairing mode (as explained
in operang instrucons for your phone) and search
for Bluetooth® devices.
First Time Use
Charging the Baery
The VM175BT Speaker has a built-in, rechargeable
lithium-polymer baery. To avoid damage, do not
aempt to remove the baery. The full performance of
the baery is achieved aer two or three charging-dis-
charging cycles. Charge the baery fully before first use.
1. Connect the USB cable to the speaker.
2. Connect to the correct outlet (wall, computer, car
charger).
3. When the charger is connected to the speaker, the red
indicator light will turn on.
Note: Charging the baery fully may take up to 2 hours.
4. When the baery is fully charged, the red indicator
light will turn off. Disconnect the charger from the
speaker and the outlet. The speaker is ready for use.
Note: Overcharging could reduce the life of the baery. A
charged baery will lose its capacity if it is not used
on a regular basis.
In the Box
• VM175BT Bluetooth® Speaker
• USB Charging Cable
• AUX Cable
• User Manual
Safety Precauons
• Please read this User Manual carefully and follow all
instrucons.
• To avoid damage or malfuncon of the speaker do not
drop it from high locaons and/or on to hard surfaces,
do not place heavy objects on it.
• Keep speaker away from humidity, water and other
liquids. If it does get wet, do not operate as this may
cause an electrical shock, explosion and damage to the
device or to the user.
• Do not place or keep this product near heat sources,
such as direct sunlight, radiators, stoves or any other
apparatus that produces heat. This may cause an
explosion, degrade the performance and/or reduce
baery life.
• Do not modify, repair or disassemble device (especially
the baery). Doing so will void the warranty. The
baery in this device may present a risk of fire or
chemical burns if misused or tampered with.
• Use only supplied and manufacturer-approved chargers
and unplug this device when not in use for long periods
of me or during lightning storms.
FCC Statement
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV
interference, caused by unauthorized modificaons
to this equipment. Such modificaons could void
the user's authority to operate the equipment.
EC Declaraon of Conformity
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV
interference, caused by unauthorized modificaons
to this equipment. Such modificaons could void
the user's authority to operate the equipment. This
product is CE cerfied according to the provision of
the R&TTE Direcve (99/5/EC). This declares that
this product is in compliance with the essenal
requirements and other relevant provisions of
Direcve 1999/5/EC. Please note that this product
uses radio frequency bands not harmonized within
EU. Within the EU this product is intended for use
in Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Ireland, Italy, Luxembourg, the
Netherlands, Portugal, Spain, Sweden, and United
Kingdom and within EFTA in Iceland, Norway and
Switzerland.
Locaon of Controls
Next Track / Volume +
Power / Play / Pause / Answer
Indicator LED
Microphone
Previous Track / Volume –
Auxiliary Port
Charging Port
FrontBack
This device complies with Part of the FCC Rules
15
Technical Support
For technical support issues, visit our website at
www.vivitar.com. Manuals, soware and FAQ’s are
available on line. If you can’t find what you are looking
for, e-mail us at support@vivitar.com where one of our
technical support team members will help you. US
phone: 1-800-592-9541; UK phone: 0800 917 4831;
Australia phone: 1800-006-614. Telephone numbers
from other countries can be found at: www.vivitar.com.
Service and Returns
When returning a defecve product (postage pre-paid)
for service, the package should include:
1. Copy of original bill of sale.
2. A detailed wrien descripon of the problem.
3. Your return address and telephone number (Dayme).
Where to send defecve products
United States
Sakar Internaonal
Aenon: Service Department 195 Carter Drive
Edison, NJ 08817
United Kingdom / Europe
Sakar Internaonal
Aenon: Service Department 2D, Siskin Parkway East
4020 Middlemarch Business Park Coventry, CV3 4SU
Australia
Return faulty device to the
Refund Counter at the store where the product was
purchased.
• Modificaon and repair of the unit should be done by
an authorized and qualified service center or returned
to the manufacturer.
• This warranty gives you specific legal rights, and you
may also have other rights, which vary under local laws.
What is Covered
This warranty covers for the original consumer purchaser
only and is not transferable. Products that fail to funcon
properly UNDER NORMAL USAGE, due to defects in
material or workmanship will be repaired at no charge for
parts or labor for a period of one year from the me of
purchase.
What is NOT Covered
Damages or malfuncons not resulng from defects in
material or workmanship and damages or malfuncons
from other than normal use, including but limited to,
repair by unauthorized pares, tampering, modificaon
or accidents.
4. Select "viv speaker" from the list shown on your
phone.
5. If requested, enter the PIN code "0000" and confirm
the entry. Once the pairing is successful, the
VM175BT connects to your phone automacally
before switching to standby mode. The indicator will
blink blue once every four(4) seconds.
Note: If pairing is not completed within ten(10)
minutes, the speaker will turn off. If this happens,
repeat the pairing steps above.
General Operaon
Turning ON/OFF
1. Press and hold the POWER buon for three(3)
seconds to turn the speaker ON. If pairing was
successful (instrucons above), the speaker will
remain paired to your mobile device.
2. Press and hold the POWER buon for five(5) seconds
to turn the speaker OFF.
Note: The speaker will turn OFF automacally when not
connected to a mobile device for approximately
ten(10) minutes.
Music Playback
Play/Pause buon: Press to play or pause music
playback.
Next Track / Volume + buon: Press to increase sound
level. Press and hold to skip to the next track.
Previous Track / Volume – buon: Press to decrease
the sound level. Press and hold to return to the
previous track.
Using the Phone Funcon
Last Number Re-dial: In standby mode, press the
ANSWER buon twice to re-dial the last number called.
Answering a Call: Short press the ANSWER buon to
answer an incoming call.
Reject an Incoming Call: Press and hold the ANSWER
buon for two(2) seconds to reject an incoming call.
Transferring a Call: Press and hold Next Track / Volume
+ buon for two(2) seconds to transfer a call from the
phone to speaker.
Ending a Call: Short Press the ANSWER buon to end a
call.
Warranty Informaon
This warranty is non-transferable and is limited only to
the original purchaser. The condions of this warranty
and supplier's responsibilies under this warranty are as
follows:
• You must be able to prove the date of original purchase
of the unit with a dated receipt.
• The warranty is not applicable if the product has been
subject to physical abuse, improper installaon,
modificaon or repair by an unauthorized third party.
• Supplier's responsibility shall be limited to the repair or
replacement of the product at its sole discreon.
• Specifically exempt from any warranty are limited-life
consumable components subject to normal wear and
tear such as baeries, decorates and other accessories.
• Supplier is not responsible, for failure resulng from
accident, abuse, misuse, or any unauthorized repair, or
modificaon.
Front
Next Track / Volume +
Play/Pause
Previous Track / Volume –
Front
Answer
Microphone
Vivitar® VM175BT
Bluetooth® Speaker
User Guide
Thank you for purchasing the Vivitar® VM175BT
Bluetooth® Speaker.
Introducon
With this speaker, you will enjoy listening to high quality
music wirelessly using Bluetooth® technology. Easily
connect to any mobile device for both conversaon and
music listening. It also pairs with other Bluetooth-en-
abled devices (Bluetooth V4.1+EDR specificaon and
HSP, HFP, A2DP and AVRCP profiles).
Specificaons
• Bluetooth Specificaon: V4.1+EDR
• Operaon Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operaon Range: Up to 33 feet(10 meters)
• Talk Time: 4 hours
• Play Time: 2 hours
• Standby Time: 10 hours
• Baery Type: 400mAh, 3.7V, Polymer Lithium Ion
Baery
• Charge Time: 2 Hours
Important!
Ensure that the baery is fully charged if the speaker is
not used for a long period of me. To avoid a complete
discharge of the baery, charge the speaker at least
every six(6) months.
Baery Notes
• A fully charged baery provides up to four(4) hours of
talk-me, two(2) hours music playback, and up to
ten(10) hours of standby me. Talk and standby mes
vary depending on mobile phones or other
compable Bluetooth® devices, sengs, styles, etc.
• When the baery power is low, the speaker will beep
every 30 seconds.
• When using with your iPhone, an addional baery
meter feature will display the remaining baery on
your phone’s touch screen.
Pairing with your Phone
1. Place the speaker in close range of a Bluetooth®-en-
abled mobile phone.
2. Press and hold POWER buon for three(3) seconds.
Unl indicator lights flash blue and red.
3. Set your mobile phone to pairing mode (as explained
in operang instrucons for your phone) and search
for Bluetooth® devices.
Technical Support
For technical support issues, visit our website at
www.vivitar.com. Manuals, soware and FAQ’s are
available on line. If you can’t find what you are looking
for, e-mail us at support@vivitar.com where one of our
technical support team members will help you. US
phone: 1-800-592-9541; UK phone: 0800 917 4831;
Australia phone: 1800-006-614. Telephone numbers
from other countries can be found at: www.vivitar.com.
First Time Use
Charging the Baery
The VM175BT Speaker has a built-in, rechargeable
lithium-polymer baery. To avoid damage, do not
aempt to remove the baery. The full performance of
the baery is achieved aer two or three charging-dis-
charging cycles. Charge the baery fully before first use.
1. Connect the USB cable to the speaker.
2. Connect to the correct outlet (wall, computer, car
charger).
3. When the charger is connected to the speaker, the red
indicator light will turn on.
Note: Charging the baery fully may take up to 2 hours.
4. When the baery is fully charged, the red indicator
light will turn off. Disconnect the charger from the
speaker and the outlet. The speaker is ready for use.
Note: Overcharging could reduce the life of the baery. A
charged baery will lose its capacity if it is not used
on a regular basis.
Service and Returns
When returning a defecve product (postage pre-paid)
for service, the package should include:
1. Copy of original bill of sale.
2. A detailed wrien descripon of the problem.
3. Your return address and telephone number (Dayme).
Where to send defecve products
United States
Sakar Internaonal
Aenon: Service Department 195 Carter Drive
Edison, NJ 08817
United Kingdom / Europe
Sakar Internaonal
Aenon: Service Department 2D, Siskin Parkway East
4020 Middlemarch Business Park Coventry, CV3 4SU
Australia
Return faulty device to the
Refund Counter at the store where the product was
purchased.
• Modificaon and repair of the unit should be done by
an authorized and qualified service center or returned
to the manufacturer.
• This warranty gives you specific legal rights, and you
may also have other rights, which vary under local laws.
What is Covered
This warranty covers for the original consumer purchaser
only and is not transferable. Products that fail to funcon
properly UNDER NORMAL USAGE, due to defects in
material or workmanship will be repaired at no charge for
parts or labor for a period of one year from the me of
purchase.
What is NOT Covered
Damages or malfuncons not resulng from defects in
material or workmanship and damages or malfuncons
from other than normal use, including but limited to,
repair by unauthorized pares, tampering, modificaon
or accidents.
In the Box
• VM175BT Bluetooth® Speaker
• USB Charging Cable
• AUX Cable
• User Manual
Safety Precauons
• Please read this User Manual carefully and follow all
instrucons.
• To avoid damage or malfuncon of the speaker do not
drop it from high locaons and/or on to hard surfaces,
do not place heavy objects on it.
• Keep speaker away from humidity, water and other
liquids. If it does get wet, do not operate as this may
cause an electrical shock, explosion and damage to the
device or to the user.
• Do not place or keep this product near heat sources,
such as direct sunlight, radiators, stoves or any other
apparatus that produces heat. This may cause an
explosion, degrade the performance and/or reduce
baery life.
• Do not modify, repair or disassemble device (especially
the baery). Doing so will void the warranty. The
baery in this device may present a risk of fire or
chemical burns if misused or tampered with.
4. Select "viv speaker" from the list shown on your
phone.
5. If requested, enter the PIN code "0000" and confirm
the entry. Once the pairing is successful, the
VM175BT connects to your phone automacally
before switching to standby mode. The indicator will
blink blue once every four(4) seconds.
Note: If pairing is not completed within ten(10)
minutes, the speaker will turn off. If this happens,
repeat the pairing steps above.
General Operaon
Turning ON/OFF
1. Press and hold the POWER buon for three(3)
seconds to turn the speaker ON. If pairing was
successful (instrucons above), the speaker will
remain paired to your mobile device.
2. Press and hold the POWER buon for five(5) seconds
to turn the speaker OFF.
Note: The speaker will turn OFF automacally when not
connected to a mobile device for approximately
ten(10) minutes.
Music Playback
• Use only supplied and manufacturer-approved chargers
and unplug this device when not in use for long periods
of me or during lightning storms.
FCC and IC Statement
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV
interference, caused by unauthorized modificaons
to this equipment. Such modificaons could void
the user's authority to operate the equipment.
EC Declaraon of Conformity
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV
interference, caused by unauthorized modificaons
to this equipment. Such modificaons could void
Play/Pause buon: Press to play or pause music
playback.
Next Track / Volume + buon: Press to increase sound
level. Press and hold to skip to the next track.
Previous Track / Volume – buon: Press to decrease
the sound level. Press and hold to return to the
previous track.
Using the Phone Funcon
Last Number Re-dial: In standby mode, press the
ANSWER buon twice to re-dial the last number called.
Answering a Call: Short press the ANSWER buon to
answer an incoming call.
Reject an Incoming Call: Press and hold the ANSWER
buon for two(2) seconds to reject an incoming call.
Transferring a Call: Press and hold Next Track / Volume
+ buon for two(2) seconds to transfer a call from the
phone to speaker.
Ending a Call: Short Press the ANSWER buon to end a
call.
the user's authority to operate the equipment. This
product is CE cerfied according to the provision of
the R&TTE Direcve (99/5/EC). This declares that
this product is in compliance with the essenal
requirements and other relevant provisions of
Direcve 1999/5/EC. Please note that this product
uses radio frequency bands not harmonized within
EU. Within the EU this product is intended for use
in Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Ireland, Italy, Luxembourg, the
Netherlands, Portugal, Spain, Sweden, and United
Kingdom and within EFTA in Iceland, Norway and
Switzerland.
Locaon of Controls
Next Track / Volume +
Power / Play / Pause / Answer
Indicator LED
Microphone
Previous Track / Volume –
Auxiliary Port
Charging Port
Warranty Informaon
This warranty is non-transferable and is limited only to
the original purchaser. The condions of this warranty
and supplier's responsibilies under this warranty are as
follows:
• You must be able to prove the date of original purchase
of the unit with a dated receipt.
• The warranty is not applicable if the product has been
subject to physical abuse, improper installaon,
modificaon or repair by an unauthorized third party.
• Supplier's responsibility shall be limited to the repair or
replacement of the product at its sole discreon.
• Specifically exempt from any warranty are limited-life
consumable components subject to normal wear and
tear such as baeries, decorates and other accessories.
• Supplier is not responsible, for failure resulng from
accident, abuse, misuse, or any unauthorized repair, or
modificaon.
FrontBack
Front
Next Track / Volume +
Play/Pause
Previous Track / Volume –
Front
Answer
Microphone
VM175BT(BTSP087)_EN, W300(50×6)×H70mm, 80g书写纸, 单黑双面印刷
VM175BT(BTSP087)_EN, W300(50×6)×H70mm, 80g书写纸, 单黑双面印刷
折叠示意图
Q4-RD-07A0
订单编号
工厂型号
客户型号
客户品牌
工程设计 业务审核
物料名称
规格/材质
描述
工程审核
物料编码
77-007-00815
VM175BT_EN, W300(50×6)×H70mm, 80g书写纸, 单黑双面印刷
BK3254
2016-08-10
VM175BT
BTSP087
mm(1 : 1)
A
Vivitar®
SakarSO201608008
石成伟

Navigation menu