ATID AT870N Industrial PDA User Manual AT870N WinMB User Guide v 1 2 Eng

Download:
Mirror Download [FCC.gov]
Document ID	3262862
Application ID	2mOEyCtJ/Iun7onoWBuH9g==
Document Description	Users Manual-3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	212.88kB (2660983 bits)
Date Submitted	2017-01-18 00:00:00
Date Available	2017-01-19 00:00:00
Creation Date	2016-12-20 10:52:44
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2016-12-20 10:52:44
Document Title	Microsoft Word - AT870N_WinMB_User?Guide?v?1.2_Eng
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ls

After entering PIN code, click Next.
Select SPP-R200 from the list.
*Default PIN code for SPP-R200 printer
is “0000”.
Select Serial Port
Select New Outgoing Port from COM
Ports tab.
Select SPP-R200.
Select COM 2 and click Finish.
After the pairing, Data transfer/reception is
possible via COM2
45
AT870N User Guide
* If the device information is not displayed correctly, please try Add New Devices again.
* PIN code used in pairing can be mutually set on devices.
* After the normal pairing, S/W, SDK etc. provided from Bluetooth manufacturer can be
used for further Bluetooth services.
3.3 Bixolon SPP-R200 Printer Demo
SPP-R2000 of Bixolon’s leading mobile printer is used for Bluetooth Print
demonstration. Application listed on the homepage was used for the test.
**The SDK and programs from 2011/08/05 was used for the demonstration test and it
may be different from the ones that are presently listed on Bixolon homage.
1. Go to Bixolon website (www.bixolon.com) for “SPP-R200 Windows SDK”, and unzip
the file onto the hard drive.
2. Turn on Bluetooth Power.
3. Run “Bluetooth Device Properties” from Control Panel.
4. Turn on SPP-R200.
5. Set SPP-R200 printer into Bluetooth mode (Refer to SPP-R200 User Guide for the
details.)
6. Click Scan Device to search for the devices nearby that can be paired.
7. Try pairing with SPP-R200 when searched on the list. PIN code is “0000” if the setting
is in default.
8. If the pairing is successful, message that device is connected via COM2 port is
shown on the screen (If the pairing has been performed previously, the message may
not be shown.)
9. In the downloaded SDK from Bixolon website, copy DLL files and execute files from
bin\wm6\ folder to Flash Disk folder of AT870N.
10. Run Sample.exe from Flash Disk folder of AT870N.
11. Since SPR-R200 is allocated in COM2, change COM8 to COM2 and click Open.
12. Click on the Printing button and Sample Printing to check if the printing is performed.
COM8 -> COM2
Select Open and then select
Printing
Select Sample Printing
46
AT870N User Guide
4. Phone
4.1 Turn
on the
e phone
1. [Home] -> [Phone]
Phone]
2. [Start]->[P
he keypad.
from th
3. Press
4.2M
Making a ph
hone call
Icon
Desc
cription
Delete
the numbers.
Speed dial ca
an be used to
o call the pre
e-stored num
mber
by pressing on
o according
g number. (S
Speed dial can
ave up to 98
8 numbers.)
sa
C History.
Call
Ta enables the
Talk
t calling.

The spee
ed dial number is press
sed for a few
w seconds for the speed dial calls.
47
AT870N U
User Guide
4.3 Receiving calls
Icon
Description
Receives the incoming calls.
Rejects the incoming calls.

Receiving call messages may be displayed differently.
4.4Hanging up calls
Icon
Description
Use Speaker phone.
Use Mute.
Put the current phone call on hold state.
After putting the call on hold, add another call.
Contact can be used for search/add/delete of
contacts.
End calls.
48
AT870N User Guide
4.5Switching calls
Icon
Description
Put the current call on hold and the call that was on
hold back to call state.
5. Contacts
5.1Contacts
1. [Home] -> [Contacts]
2. [Start]->[Contacts]
49
AT870N User Guide
5.2 Search for Contacts
Enter a name for searching.
5.3 Adding New Contacts
Select a contact type.
Click on the button to add
new contacts.
50
AT870N User Guide
6. Text Message
6.4 Replying to the Text Message
Click on the Reply.
Click on the message from the
Inbox
Enter the messages and click on the
button to send.
51
AT870N User Guide
7. GPS Module
GPS Module can be selected as an option in AT870N, and GPS Module is built-in at the top of the
handheld.
GPS program port: GPD1
GPS hardware port: COM6, 9600
7.1GPS Demo Program
Run application
- [Start Button] -> [DEMO_GPS_WM]
Main Window
- Start: Start receiving GPS Data
- Stop: Stop receiving GPS Data
Checking on GPS Data Reception:
1. The reception has to be checked in an open area.
2. The reception time for GPS Data can be different depending on the
environments. (About 3~10 minutes)
After the receiving the GPS data at first, it may take less time for
reconnection/reception of GPS data next time.
8. Camera
The handheld can be equipped with 3.0-megapixel camera with functions of adjusting brightness
and resolution, capture, video etc.
52
AT870N User Guide
8.1 Camera
Run application
- [Start Button] -> [Pictures & Videos] -> [Camera]
Main Window
- Thumb…: Close the main window and go to Pictures & Videos screen.
- Menu: Menu popup
- To save screen, press “Enter” from the keypad.
9. HF13.56MHz
The handheld can be equipped with HF13.56Mhz module internally. According to ISO standards, it
can read tags from 3~8.5cm distance (For Mifare, the distance is 1~3.5cm).
9.1RF13.56 Demo Program
Run application
- [Start Button] -> [DEMO_HF]
Mifare Window
53
AT870N User Guide
- Open: Open HF device
- Antenna: Stops the antenna signal.
- Perform: Run the selected command from combo box.
- ISO>: Change to ISO-15693 command screen.
- Block: Number of Block be accessed.
- Key Type: Key type of Block to be accessed.
- Key Set: Key set of Block to be accessed.
ISO-15693 Window
-  [DEMO_SAM]
Main Window
- Slot Status: Check the status of the slot.
- PowerOn: Authorize the power of smart card device.
- PowerOff:Unauthorize the power of smart card device.
- SetParam: Set protocol type, clock rate, bit rate etc. of the card
device.
- GetParam: Read protocol type, clock rate, bit rate etc. of the card
device.
- Default: Set to default settings.
- TxBlock: Transfer APDU Command to the card device.
- FwVersion: Read the firmware version of the card device.
55
AT870N User Guide
11. UHF 900
0Mhz
The handheld can be equip
pped with UHF
900Mhz. It can rea
ad or write E
EPC GEN2
2 protocol
RFID
D tags. The frequency range is 85
50 ~ 960Mh
hz which ca
an be adjustted according to the
coun
ntries.
UHF
Reader
11.1 UHF 900M
Mhz Program
Run app
plication
- [Start Button]
-> [DE
EMO_UHF]
Main Wiindow
- Start: Start
the Inve
entory.
- Clear: Clear
all the tag informattion shown on the screen
n.
- Menu: Main menu
56
AT870N User
Guide
Application option menu
- Read/Write: Perform Read/Write.
- Lock/Kill: Perform Lock/Kill.
- Option: Application option
- Version: Version information
Read/Write Window
- Mask: Selected value from main window is displayed here. It is
used as masking pattern when performing Read/Write.
Even if there are many tags nearby, only tags that are set
as masking pattern can be read or written.
- Kill Pwd, Access Pwd: Read/Write tag’s Kill password, access
password.
- EPC length: Read/Write tag’s EPC length.
Even if 128 bit sized tags are used, if the EPC
length is set to 96 bit, then the Inventory is only
performed on 96 bit.
Please refer to EPC Class1 Gen2 specification details.
- Read/Write: Read/Write on selected Memory Bank.
- MemBank: Target memory bank of Read/Write.
- Ptr: Start of Memory bank’s offset
- Seconds: Time taken in seconds for Read/Write.
- Format: format the data to be Read/Write.
Lock/Kill Window
- Mask: Selected value from main window is displayed here. It is
used as masking pattern when performing Lock/Kill.
Even if there are many tags nearby, only tags that are set
as masking pattern can be lock/kill.
- Kill Pwd, Access Pwd: Read/Write tag’s Kill password, access
password.
- EPC length: Read/Write tag’s EPC length.
Even if 128 bit sized tags are used, if the EPC length is set to 96 bit,
then the Inventory is only performed on 96 bit.
Please refer to EPC Class1 Gen2 specification details.
- Do Lock: Perform on Lock as it is set in the checkboxes.
- Kill: Kill tags. Once the Kill tag is performed it cannot be restored
to its original state.
57
AT870N User Guide
Options Window
- Session: Change Session that is used in Tag operation
- Target: Change Target that is used in Tag operation
- Q: Change Q that is used in Tag operation
- LBT Ch State/Time: Change LBT option that is used in Europe, Japan frequencies (Not
available)
- Power: Change Tx Power level of the reader.
Version Window
- Demo app Ver: Demo application version
- Firmware Ver: UHF module firmware version
- Protocol Ver: UHF module library version
- Hopping Mode: UHF module’s country version
- Max TxPwr: UHF module’s max output
58
AT870N User Guide
Chapter 5. Appendix
Product Specifications
Physical Characteristics
Dimension(L*W*H)
76 X 148 X 24.8(30.5) mm
Weight
320g (PDA only, without Battery)
Operating Temp.
-20℃ ~ 60℃
Storage Temp.
-30℃ ~ 70℃
Humidity
95% Non-condensing
Drop
1.5m Drop to concrete
Performance Characteristics
Processor
Marvell PXA320 806MHz
Operating System
Windows CE 5.0
Memory
512MB RAM / 512MB ROM
3.5" QVGA with Backlight
TFT LCD, 240*320 Pixel, 262,144color
Stylus Touch Screen Interface
Display
Audio
Phone Receiver, Speaker, Ear Jack, Microphone
Standard I/O Port
Keypad
USB 1.1 Client / USB Host & Serial (RS-232) via gender cable or cradle
1 Micro SD slot (SDHC support)
1 SIM slot
29 key
Notification
Vibrator and LED, Speaker
Expansion Slot
Power System
Back-up Battery
Lithium ion 3.7V Above 2,960mAH(Rechargeable)
Up to 4,400mAH(Optional)
Lithium Polymer 3.7V, 80mAH(Rechargeable)
Power Adapter
Input AC110~240V / Output DC 5V 3A
Battery
Network characteristic
Radio
MODEM 3G (GSM / GPRS / HSDPA / HSPA+)
WLAN
IEEE 802.11 b/g/a compliant
Antenna
Internal LAN & WAN
Data Capture Device
Scanner
1D Laser, 2D Imager Barcode Scanner
Camera
3.0 Megapixel Auto Focus with Flash
UHF 900MHz tag reader
Frequency
860MHz- 960Mhz(Adjustable)
Reading Range
0m ~ 7m (differs from each tag)
59
AT870N User Guide
Writing Range
0m ~ 3m (According to Tag & Environment)
Antenna Gain
2 dbi (Standard)
Speed
62.5 kbps
RF Output
1W EIRP
EPC Gen2 ISO 18000 6C
ISO 18000 6B(Optional)
Anti-collision
Protocol
Special Function
60
AT870N User Guide
61
AT870N User Guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Modify Date                     : 2016:12:20 10:52:44+08:00
Create Date                     : 2016:12:20 10:52:44+08:00
Metadata Date                   : 2016:12:20 10:52:44+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - AT870N_WinMB_User?Guide?v?1.2_Eng
Creator                         : ls
Document ID                     : uuid:5c9ff8a1-7bea-4a3f-a2b8-7adf0fd781ff
Instance ID                     : uuid:e244c93f-dc9b-48f1-8788-30af42e2c79f
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Page Count                      : 17
Author                          : ls

EXIF Metadata provided by EXIF.tools