ATOP Technologies AT705RFID Picktag User Manual AT707A4KRF USER MANAUAL

Download:
Mirror Download [FCC.gov]
Document ID	1673667
Application ID	qMIRmacgITYBikXxSMBeGw==
Document Description	User Manual (AT707A4KRF)
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.05kB (350651 bits)
Date Submitted	2012-04-11 00:00:00
Date Available	2012-04-11 00:00:00
Creation Date	2012-04-02 11:56:55
Producing Software	pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document Lastmod	2012-04-06 14:56:39
Document Title	AT707A4KRF USER MANAUAL.doc
Document Creator	pdfFactory Pro www.ahasoft.com.tw/FinePrint
Document Author:	lydia

ABLE Pick Pick-to-light
(AT707-A-4K-RF)
User Manual
V 1.0
Updated at: 2011/12/01
by
ATOP Technologies, Inc.
Tel: +886-3-5508137
Fax: +886-3-5508131
E-mail: abelin@atop.com.tw
Introduction
ABLEPick is an advanced paperless picking system providing an innovative, streamlined and
cost-effective Pick-to-light solution to simplify the order fulfillment process in warehouse or
distribution center. ABLEPick use a state-of-the-art and light-directed technology to maximize
the picking productivity, speed and accuracy in different picking operation.
Products Features
- Ethernet architecture, follow up the standard TCP/IP communication protocol.
- CABLELESS pick tags.
- Versatility in different operating modes configuration.
- Easy to install, maintain and upgrade.
- Wide operating temperature range (from –25oC to 40oC).
Benefit
- Paperless picking process.
- Streamline the order fulfillment process.
- Increase picking productivity dramatically.
- Accuracy assured: virtually eliminate picking error, below 0.1%.
- Easy to use: picker can usually be trained in less than 1/2 hour.
- Strengthen management control: on-line picking data control, easy to prompt the material
shortage.
PTL PC
Switch HUB
Ethernet
AT500
Ethernet
Figure ABLEPICK Architecture
ABLEPick pick-to-light user manual
. PICK-TO-LIGHT OPERATION
Work flow of pick-to-light system: Below simply describe the basic operation
Data entry
Picking list files can be downloaded to the LAN server or PC from WMS/MIS host. These
files will be read and merged into pick-to-light picking list database.
Control and communication
Pick-to-light software will monitor picking flow and offer real-time information on the
screen.
Light up
Different models of picking tags light up to indicate what order, which location and how
many pieces to be picked.
Pick and confirm
The picker picks the quantity as tag shows or modifies the quantity directly from tag, then
push the button to confirm this action.
2 Complete
Completion indicator will light up and buzz after all jobs in a zone are done. Push the
button to confirm this action and move this order to the next available zone.
ABLEPick pick-to-light user manual
ABLEPick Hardware
TCP/IP controller
AT500
TCP/IP controller is a data transmission medium between picking control PC and all the
picking devices. Which is Ethernet architecture product, following up the standard TCP/IP
communication protocol to communicate with the host PC. Each controller has 4 output
channels to connect to the picking devices, each channel can connect to maximum 30
devices. So one TCP/IP controller can connect to maximum 120 pcs of picking devices.
Specifications:
- To host computer communication interface :
IEEE 802.3 Base band (Ethernet)
RJ-45 Phone-jack connector x 1
Transmission speed: 10 / 100 Mbps
Communication protocol : TCP/IP
- Input Voltage and current: AC 115/230 V,
50/60 Hz
- Power supply : Maximum 320 Watt
- Temperature :
0 °C to 50 °C operating,
-20 °C to 70 °C storage
- Humidity: 90% non-condense
- Dimension: Aluminum case 250(L)*130(W)*100(H)mm
Pin assignment:
RS485 D-type 9 pin female connector
pin
Defin.
GND
DATA14
RTS5
DATA+
RTS+
ABLEPick pick-to-light user manual
I/O port pin assignment
pin
Defin.
RTS+
RTS3
DATA+
DATA5
GND
+12V /3A
Fan switch, 45 C auto power on
AT500’s IP configuration
AT500’s default IP address is “10.0.50.100” and sub-mask is “255.255.0.0”. You can use
ATOP’s tool “MONITOR.exe” to know and re-configure each AT500’s IP address.
Connection to TCP/IP controller (AT500)
Since AT500 has no DHCP function, so its host control PC/NB need to assign one IP
address which have to be within the same domain as the AT500. Then you can create one
TCP connection to connect it. AT500’s TCP port is 4660.
ABLEPick pick-to-light user manual
Picking Tag : AT707-A-4K-RF
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
guarantee that interference will not occur in a particular installation.
However, there is no
If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
ABLEPick pick-to-light user manual
AT707-A-4K-RF is an advanced picking device which can be able to implement less or no
zone boundary within order fulfillment operation for pick-by-light or put-by-light flow, called
zoneless picking light. AT707-A-4K-RF’s communication protocol is fully compatible with
Atop’s other cableless pick-to-light products.
AT707-A-4K-RF has 4 illuminated buttons with different LED color (RED, GREEN,
BLUE and YELLOW), each button could represent an picking order for pick-by-light
operation flow or a sorting product item for put-by-light operation flow. In other words,
with this design, AT707-A-4K-RF allows multiple orders for pick-by-light or multiple
items for put-by-lights be able to working concurrently within the same area.
Each button has 3 data buffers. 2 data with the arrows status is used for picking indication,
the third one is an extra prompt buffer. Once this prompt buffer has been stored message,
then this message will auto-show up for 2 seconds next to the previous picking data is
confirmed back.
Moreover, AT707-A-4K-RF’s another intelligent feature is the integrated design with RF
reader, all the data withdrawal from buffer and confirmation will be implemented by the
RF technology to control the accuracy, especially when implementing the multiple orders
or multiple items are working concurrently within the same area.
User can appoint one RF tag’s UID code (unique ID) to each button of AT707-A-4K-RF,
Then each button could have its corresponding picking data to have linkage with its
specific RF tag’s UID during picking operation. In other words, all the pre-sending picking
data need to recognize by its corresponding UID tag, then it can be able to trigger to work.
ABLEPick pick-to-light user manual
User use the RF tag by “finger ring type” to push the confirmation button, when RF
reader catch and recognize the tag’s UID code, it will auto-retrieve its corresponding
button’s data from buffer to show on the 7-digit LED display, meantime, its corresponding
button’s light could change to different status to distinguish with the other standby buttons
and confirmation button also has the same LED color as the small button tell user which
color is working on.
ABLEPick pick-to-light user manual
User needs to use the same RF tag to push the confirmation button again to confirm this
picking (double hits). Then the small button will be off to mean its picking is completed.
And the message on the prompt buffer will be shown up for 2 sec (such as
“End”…etc).automatically.
With the RF design, AT707-A-4K-RF allows system software to track each pick back to
a specific picker, by this way, each picker’s productivity could be countable accurately.
And its Multi-color LED identification increases operating flexibility and productivity by
allowing concurrent operating in one area.
AT707-A-4K-RF also uses different beep sound to distinguish different RF reading in
different states, such as error reading, no reading, or first data withdrawal and second data
confirmation.
Large illuminated confirmation button.
AT707-A-4K-RF’s confirmation button has 6 colors LED design, which are RED, GREEN,
AMBER, BLUE, PURPLE and INDIGO individually. The default color is RED. LED’s
color can be configured by software, which can be stored in the EEPROM.
Two up/down count buttons
The left side of AT707-A-4K-RF has two small illuminated buttons, up-count(function
key) with WHITE LED, and down-count (shortage) buttons with WHITE LED, too. Push
shortage (down-count) button can acknowledge the shortage situation or by adjusting
up-count/down-count button to present partial picking process. Both different behaviors
could be configured by software.
AT707-A-4K-RF’s power on procedure
Step1: The 7-segment will show “8“ from 1st digit to last digit sequentially(from right to
left).
Step2: 6 illuminated buttons include 2 arrows and 4 small buttons will flash once.
ABLEPick pick-to-light user manual
Step3: The confirmation button’s LED light will change color: RED, GREEN , BLUE
sequently.
Step4: Show the F/W version of the tag. For example: “U1.0”.
Step5: Show the address ID of the tag. For example: “[001]” (this is a decimal number).
Step6: Show the tag mode configuration of the tag. The default tag mode configuration
value is 115. in decimal.
Address configuration via the buttons directly.
The same as the other light model with three buttons
Self-test function enabled
The same as the other light model with three buttons
AT707-A-4K-RDIF hardware
Specification
1) Has two pairs of magnetic connectors to connect easily to main transmission bus with
stainless stuff. Two pairs of connectors are the redundancy design to enforce the
connection
2) 7-digits LED display. The first 4 digits are alphanumerical display, the left 3 digits are
7-segment display.
3) 2 up/down illuminated function buttons. Both Up and Down arrow buttons are WHITE
color.
4) One large illuminated confirmation button with 6-color LED.
5) 4 small illuminated button with different LED color by RED, GREEN, BLUE and
YELLOW from left to right. .
6) Each small illuminated button has 3 corresponding data buffer. 2 is for picking data,
another extra is called prompt buffer. It will be displayed automatically hereon the
picking data when it has been stored in.
ABLEPick pick-to-light user manual
7) RF reader can be configured to be enabled or disabled.
8) Power requirements: DC 12V ; Max:200mA
9) Operating temperature: 0 °C to 40 °C
10) Dimension : 200(L) * 45 (W) * 30(H) mm
ABLEPick pick-to-light user manual
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : 3.1-701
Create Date                     : 2012:04:02 11:56:55+08:00
Creator Tool                    : pdfFactory Pro www.ahasoft.com.tw/FinePrint
Modify Date                     : 2012:04:06 14:56:39+08:00
Metadata Date                   : 2012:04:06 14:56:39+08:00
Format                          : application/pdf
Creator                         : lydia
Title                           : AT707A4KRF USER MANAUAL.doc
Producer                        : pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document ID                     : uuid:b3742b60-52dd-4fc2-9fb1-9d5069a7e2c7
Instance ID                     : uuid:142b941b-62d1-4198-bf9f-81aed3c23624
Page Count                      : 11
Author                          : lydia

EXIF Metadata provided by EXIF.tools