ATrack Technology ATVT1013 GPS/GSM/GPRS Tracker User Manual Protocol

ATrack Technology Inc. GPS/GSM/GPRS Tracker Protocol

manual

AT Series User Manual Revison: 07 Revision Date: 2010/03/30 ATrack Technology Inc. 6F., No. 58, Zhouzi St., Neihu Dist., Taipei City 11493 Taiwan (R.O.C.) Tel: +886-2-27975852 Fax: +886-2-27974030 http://www.atrack.com.tw
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 2 of 14 Contents 1. Notification ..............................................................................................................................3 1.1. Disclaimer ....................................................................................................................................3 1.2. Copyright......................................................................................................................................3 2. Hardware.................................................................................................................................4 2.1. Package Content ......................................................................................................................... 4 2.2. Pin Assignments ..........................................................................................................................5 2.2.1. Serial Cable (JST Female Connector to DB9 Female Connector)..........................................5 2.2.2. Power/IO connector (Male; On Device)................................................................................... 5 3. Firmware Upgrade .................................................................................................................6 3.1. Firmware Upgrade by serial connection ......................................................................................6 4. Appendix................................................................................................................................13 4.1. Hardware Specification ..............................................................................................................13 4.2. FCC Regulations:.......................................................................................................................14
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 3 of 14 11.. NNoottiiffiiccaattiioonn 11..11.. DDiissccllaaiimmeerr This document, and all other related products, such as device, firmware, and software, is developed by ATrack Technology Inc. thoroughly. At the time of release, it is most compatible with specified firmware version. Due to the functionalities of the devices are being developed and improved from time to time, the change in the protocol, specification, and firmware functions are subjects to change without notice. ATrack Technology Inc. is obligated to modify all the documentation without the limitation of time frame. A change notice shall be released to ATrack Technology Inc. customers upon the completion of document modification. ATrack Technology Inc. products are not intended to be used as life support or rescue equipments. ATrack Technology Inc. is not liable for any loss or injury caused by using or referencing to any products. Any possible means of using or integrating ATrack Technology Inc. products shall be avoided. 11..22.. CCooppyyrriigghhtt ATrack Technology Inc. holds all parts of intellectual rights applicable in the copyright laws in all the countries. Any or all parts of this document shall not be exposed to non-authorized party without any form of approval from ATrack Technology Inc. Any forms, including but not limited to oral, copy, or internet sharing, of releasing or exposing information to an unauthorized party shall be prohibited. ATrack Technology Inc. reserves the rights of litigation in the violation of such copyright laws.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 4 of 14 22.. HHaarrddwwaarree 22..11.. PPaacckkaaggee CCoonntteenntt Each package contains the following device/accessories: • Device * 1 • GPS Antenna * 1 • Serial Cable * 1 • GSM Antenna * 1 • Power/IO Cable * 1
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 5 of 14 22..22.. PPiinn AAssssiiggnnmmeennttss 22..22..11.. SSeerriiaall CCaabbllee ((JJSSTT FFeemmaallee CCoonnnneeccttoorr ttoo DDBB99 FFeemmaallee CCoonnnneeccttoorr)) 22..22..22.. PPoowweerr//IIOO ccoonnnneeccttoorr ((MMaallee;; OOnn DDeevviiccee)) Positive Inputs: IN0, IN1 (Triggered when connects to V+ range from 3.7 ~ 40V) Negative Inputs: IN2, IN3 (Triggered when connects to ground range from 0.8 ~ 0V) Analog Input: 0 ~ 40 V; 10-bit Resolution. All outputs are open collector type (grounded when enabled).
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 6 of 14 33.. FFiirrmmwwaarree UUppggrraaddee 33..11.. FFiirrmmwwaarree UUppggrraaddee bbyy sseerriiaall ccoonnnneeccttiioonn (1) Run HyperTerminal program
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 7 of 14 (2) Enter a name for the connection (3) Choose COM port and click [Configure…] button.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 8 of 14 (4) Choose 57600,8,N,1 None flow control properties and click [OK] button. (5) Click [File]Æ[Properties]
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 9 of 14 (6) Click [Settings] tab and [ASCII Setup…] button (7) Checked the following option and click [OK] button
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 10 of 14 (8) Power ON the device. The startup message will show on the screen. (9) Type “AT$FWDL” command and press [Enter] key. Choose [Transfer]Æ[Send File…]
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 11 of 14 (10) Choose the firmware filename which is provided by ATrack and select [Ymodem] Protocol option and click [Send] button. (11) When [Send] button is clicked, the file transfer progress will show as below:
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 12 of 14 (12) When file sending is completed, the device will program and restart itself automatically.
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 13 of 14 44.. AAppppeennddiixx 44..11.. HHaarrddwwaarree SSppeecciiffiiccaattiioonn AT5/AT5i Physical Characteristics Dimension 100 * 65 * 26 mm GSM Module Telit GE865-Quad Frequency Bands 850/900/1800/1900 GPS Module Atheros GSM and GPS Antennas SMA Connector Type Accelerometer Built-In 3-Axis @ 16GMAX Audio Amplifier Built-In Real-Time Clock Built-In Memory Capacity 8MB Casing Aluminum alloy Electrical Characteristics Power Source 8-40 VDC Power Consumption Operational Max. 200mA @ 12VDC Max. 150mA @ 24VDC Sleep 0.12mW I/O Characteristics Device I/O Ports Positive Inputs 2 (Triggering voltage: 3.7 ~ 40V) Negative Inputs 2 (Triggering voltage: 0 ~ 0.8V) Analog Input 1 (0 ~ 40V with 10-bit resolution) Negative Outputs 3 (Open Collector Type @ 300mAMAX) Serial Configurable 1 Baud rates 1200, 2400, 4800, 9600, 19200, 38400, 57600, 1-Wire 1 Environmental Characteristics Operation Temperature -30 ~ +65°C Storage Temperature -40 ~ +85°C Relative Humidity 5 ~ 95%
Confidential Document © ATrack Technology Inc. All Rights Reserved. Page 14 of 14 44..22.. FFCCCC RReegguullaattiioonnss:: z This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. z This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. 4RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. z This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Navigation menu