ATrack Technology ATVT1140 GPS/GSM/GPRS TRACKER User Manual AX5

ATrack Technology Inc. GPS/GSM/GPRS TRACKER AX5

User Manual

Download: ATrack Technology ATVT1140 GPS/GSM/GPRS TRACKER User Manual AX5
Mirror Download [FCC.gov]ATrack Technology ATVT1140 GPS/GSM/GPRS TRACKER User Manual AX5
Document ID1722897
Application IDKR11TKl6QTBNBi63ZLUG9w==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize41.99kB (524838 bits)
Date Submitted2012-06-14 00:00:00
Date Available2012-12-11 00:00:00
Creation Date2017-10-31 06:11:47
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-31 06:11:47
Document TitleAX5 User Manual
Document CreatorAcrobat PDFMaker 8.1 for Word
Document Author: user

AX5
User Manual
Revision: 01
Revision Date: 2011/11/24
ATrack Technology Inc.
Tel: +886-2-27975852
9F, No. 285, Sec. 2, Tiding Blvd.,
Fax: +886-2-27974030
Neihu Dist., Taipei City 11493, Taiwan (R.O.C.)
http://www.atrack.com.tw
Confidential Document
Contents
1.
Notification .............................................................................................................................. 3
1.1. Disclaimer .................................................................................................................................... 3
1.2. Copyright ...................................................................................................................................... 3
1.3. Warning ........................................................................................................................................ 3
2.
Introduction............................................................................................................................. 4
2.1. Package Content ......................................................................................................................... 4
2.2. AX5 OBD-II Compliant ................................................................................................................. 4
3.
Hardware Features ................................................................................................................. 5
3.1.
3.2.
3.3.
3.4.
3.5.
3.6.
4.
OBD-II Protocol ............................................................................................................................ 5
Micro USB Connection................................................................................................................. 5
Buzzer Operation ......................................................................................................................... 5
Power Supply ............................................................................................................................... 5
Wireless Relay ............................................................................................................................. 6
LED Indication .............................................................................................................................. 6
Configration ............................................................................................................................ 7
4.1. USB Driver Installation ................................................................................................................. 7
4.2. Configure the AX5 device .......................................................................................................... 10
4.3. Firmware Upgrade ..................................................................................................................... 14
5.
Installation ............................................................................................................................. 16
5.1.
5.2.
5.3.
5.4.
5.5.
6.
What is the OBD-II DLC Connector ........................................................................................... 16
SIM Card Access ....................................................................................................................... 17
Using Low Profile OBD-II Extension Cable................................................................................ 17
GPS Performance for Installation .............................................................................................. 18
Simple Verification for Installation .............................................................................................. 19
Appendix................................................................................................................................ 20
6.1. Hardware Specification .............................................................................................................. 20
6.2. FCC Regulations:....................................................................................................................... 21
© ATrack Technology Inc. All Rights Reserved.
Page 2 of 21
Confidential Document
1. Notification
1.1. Disclaimer
This document, and all other related products, such as device, firmware, and software, is developed by
ATrack Technology Inc. thoroughly. At the time of release, it is most compatible with specified firmware version.
Due to the functionalities of the devices are being developed and improved from time to time, the change in
the protocol, specification, and firmware functions are subjects to change without notice. ATrack Technology
Inc. is obligated to modify all the documentation without the limitation of time frame. A change notice shall be
released to ATrack Technology Inc. customers upon the completion of document modification.
ATrack Technology Inc. products are not intended to be used as life support or rescue equipments. ATrack
Technology Inc. is not liable for any loss or injury caused by using or referencing to any products. Any possible
means of using or integrating ATrack Technology Inc. products shall be avoided.
1.2. Copyright
ATrack Technology Inc. holds all parts of intellectual rights applicable in the copyright laws in all the countries.
Any or all parts of this document shall not be exposed to non-authorized party without any form of approval
from ATrack Technology Inc. Any forms, including but not limited to oral, copy, or internet sharing, of releasing
or exposing information to an unauthorized party shall be prohibited. ATrack Technology Inc. reserves the
rights of litigation in the violation of such copyright laws.
1.3. Warning
Connecting the wire inputs can be hazardous to both the installer and your vehicle’s electrical system if not
done by an experienced installer. This document assumes you are aware of the inherent dangers of working
in and around a vehicle and have a working understanding of electricity.
© ATrack Technology Inc. All Rights Reserved.
Page 3 of 21
Confidential Document
2. Introduction
AX5 GPS Tracking Device is the most advanced and economical diagnostic device for communicating vehicle
information to the GSM/GPRS networks. With integrated high sensitive GPS receiver, the AX5 provides the
fundamental functions with optional advance features for tracing light trucks and passenger vehicles in need
of monitoring location, speed, and many other codes available on the OBD port of vehicles.
2.1. Package Content
Each package contains the following standard device/accessories:
• AX5 Device * 1
• USB Cable * 1
Optional accessories:
• Low Profile OBD-II Extension Cable
• Wireless Relay
2.2. AX5 OBD-II Compliant
OBD-II is a standard that issued by SAE (Society of Automotive Engineers) in the early 1990s. But some
vehicles are not following this standard. Therefore ATrack cannot guarantee the OBD-II performance of the
AX5 with every vehicle. For more information about AX5 OBD-II compliance, please refer to “ATrack AX5
OBD-II Compliant Guide” document.
© ATrack Technology Inc. All Rights Reserved.
Page 4 of 21
Confidential Document
3. Hardware Features
3.1. OBD-II Protocol
There are five signaling protocols that are permitted with the OBD-II interface. Most vehicles have been
implemented with only one of the protocols. The AX5 features a superior protocol detection algorithm that
ensures the device connects reliably even to vehicles that do not fully conform to the OBD­II standards. The
AX5 supported all legislated OBD-II protocols below:
J1850 PWM (Ford vehicles)
J1850 VPW (GM vehicles)
ISO9141-2 (Asian, European, Chrysler vehicles)
ISO 14230-4 KWP
ISO 15765-4 CAN (11/29 bit ID,250/500 Kbaud)
The AXTool has an “OBD Live Data” viewer for showing OBD data in real time. See Section 4.2 for detail
descriptions.
3.2. Micro USB Connection
The Micro USB can supply power to the AX5 device for parameters setting or firmware upgrade purpose.
When micro USB is connected to your laptop/PC and main power is not applied, the OBD-II and GSM/GPRS
functions will be turned off temporarily.
3.3. Buzzer Operation
The internal buzzer of the AX5 can be configured by any events or triggered by remote GSM/GPRS server.
Refer to AX5 Protocol Document for details.
3.4. Power Supply
The AX5 device connects to the OBD-II SAE J1962 connector of vehicle and draws power from the OBD port.
No additional power cabling is required for operation. If the OBD port of vehicle is covered or you need to
install AX5 in another place for better GPS reception, the optional low profile OBD-II extension cable is
required.
© ATrack Technology Inc. All Rights Reserved.
Page 5 of 21
Confidential Document
3.5. Wireless Relay
The optional wireless relay is used for immobilizing vehicle when AX5 device is unplugged. Using the short
range RF technology, the Wireless Relay will keep receiving RF data from AX5. Once the Wireless Relay
loses connection from AX5 for 30 seconds, the Wireless Relay will be switched off. For safety reasons it is
recommended to connect the Wireless Relay to control the starter of vehicle. Do NOT use the Wireless Relay
to control fuel pump or power train of vehicle. See the following diagram for the wiring connection of Wireless
Relay.
3.6. LED Indication
The following table describes the LED operation of AX5:
LED Indicators
Color
LED Status
Description
OBD
Green
Solid OFF
OBD Protocol not found
Fast blinking
OBD-II data transmission.
Blinking every 10 seconds
Deep sleep mode
Solid OFF
GPS power OFF
Blinking every 1 second
GPS not fix
Solid ON
GPS Location Fix
Solid OFF
GSM Power OFF
Blinking every 1 second
GSM no signal
Blinking every 2 second
GSM registered
Blinking twice every 2 second
GPRS connected
GPS
GSM
Blue
Red
© ATrack Technology Inc. All Rights Reserved.
Page 6 of 21
Confidential Document
4. Configration
4.1. USB Driver Installation
These instructions illustrate how to correctly install the USB driver in Windows platform. The procedure will
vary for other Windows-based Operating Systems.
1. Connect the Device to the USB port on a Windows-based computer.
2. Install the USB driver.
z Connect the device to a USB Port
Supported Operating Systems including Windows 2000, Windows XP, Windows 7 and Windows Vista. When
you connect the device to the computer, you will be prompted to install the driver.
Follow the steps in the next section to install the driver.
z Install the USB Driver
The AX5 USB Driver can be requested from ATrack support via email or from the Partner Login section of the
ATrack website at www.atrack.com.tw.
After connecting the device to the computer, follow these steps to complete the installation of the USB driver:
There might be multiple steps to installing the USB driver. Once each step is completed, the next step will
automatically begin itself.
The following screen captures may reflect a different device driver than the one you are installing; however,
the steps in the procedure will remain the same.
1. The Windows Operating System will detect the new USB device.
2. You will see the following screen for no driver found:
© ATrack Technology Inc. All Rights Reserved.
Page 7 of 21
Confidential Document
3. To install the driver, click on "Browse my computer for driver software"
4. Click on "Browse" button, and go to the driver provided/downloaded from ATrack.
© ATrack Technology Inc. All Rights Reserved.
Page 8 of 21
Confidential Document
5. Windows might give a warning about the verification fail. Please click on "Install this driver software
anyway" to proceed.
6. You should be able to see a progress bar running.
7. Once the installation is completed, you should be able to see the COM port showing. This will be the COM
port you use for communicate with the AX5 when USB is plugged in.
© ATrack Technology Inc. All Rights Reserved.
Page 9 of 21
Confidential Document
4.2. Configure the AX5 device
The AXTool is a simple configuration tool for the AX5 device. It is useful for user to setting basic parameters
into the AX5 device. For advanced users, please refer to the ATrack A-Series Protocol Document for detail
descriptions.
General Setting
[Device Password]: The device password is used for protecting device configurations. The maximum
length is 6 characters.
[SIM Card PIN Code]: Enter PIN code of SIM card correctly for register to network property if enabled.
[Position Format]: Select position format for all reports.
[Power Saving Mode]: Enable/Disable power saving mode. When power saving mode is enabled, the
AX5 device will go into deep sleep mode after 1 minute of engine off.
© ATrack Technology Inc. All Rights Reserved.
Page 10 of 21
Confidential Document
Communication Setting
[GPRS Enable]: Enable GPRS communication
[Socket Type]: Select TCP or UDP for GPRS communication
[APN]: Access Point Name for GPRS connection. (Please contact your cellular network carrier for the
information)
[Host IP]: Enter the IP address or domain name of host server
[Host Port]: Enter Port number of the remote host server
[User Name]: The GPRS user name. (Please contact your cellular network carrier for the information)
[Password]: The GPRS password. (Please contact your cellular network carrier for the information)
© ATrack Technology Inc. All Rights Reserved.
Page 11 of 21
Confidential Document
Track Setting
Setting tracking interval when vehicle engine is ON.
When [Time Mode] and [Distance Mode] are both selected, the tracking behavior will operate in AND
condition.
© ATrack Technology Inc. All Rights Reserved.
Page 12 of 21
Confidential Document
OBD Live Data
When AX5 has connected to the OBD-II port of the vehicle. The [OBD Live Data] will showing the OBD
live data from OBD-II port. This viewer could help to know which OBD data can be acquired by AX5
device.
System Setting
The [System] setting will showing current connected AX5 device information. The [Reset/Action] function
can be used to reset parameters or clear buffered messages in the AX5 device.
© ATrack Technology Inc. All Rights Reserved.
Page 13 of 21
Confidential Document
4.3. Firmware Upgrade
Open AXTool program and click [System] item of the manu.
Select firmware file which is provided by ATrack and click [Start] button.
When “Waiting Device Restart…” message is prompted, please do not turn off the device.
© ATrack Technology Inc. All Rights Reserved.
Page 14 of 21
Confidential Document
When “Upgrade Successfully !!” message is prompted, that means the device firmware is upgraded.
© ATrack Technology Inc. All Rights Reserved.
Page 15 of 21
Confidential Document
5. Installation
AX5 is a new design for easy installation. Just find the DLC connector of your vehicle and plug AX5 to the
port.
5.1. What is the OBD-II DLC Connector
The OBD-II DLC connector is a standard connector for all vehicles which OBD-II compliant. The OBD-II DLC
connector is shown below:
The OBD-II DLC connector shall be located in the passenger or driver’s compartment in the area bounded by
the driver's end of the instrument panel to 300 mm beyond the vehicle centerline. See the following figure for
DLC location for most of vehicle. Location #1~#3 is under the dashboard of the driver side. Location #4~#5 is
on the dashboard instrument/gauge area. Location #6~#7 is near radio and climate controller. Location #8 is
near armrest and handbrake area.
© ATrack Technology Inc. All Rights Reserved.
Page 16 of 21
Confidential Document
5.2. SIM Card Access
Remove the top cover of the AX5 and insert the SIM card to the SIM card holder.
Top Cover
SIM Card
OBD LED
GPS LED
Micro USB
GSM LED
5.3. Using Low Profile OBD-II Extension Cable
The ODB-II DLC location is different for every kind of vehicles. For example, the DLC is covered by plastic
cover like picture below. The AX5 device is too long to hide when AX5 plug into the DLC connector. The low
profile OBD-II extension cable can solve this problem. Another advantage of this cable is to re-location of the
AX5 device for better GPS performance.
© ATrack Technology Inc. All Rights Reserved.
Page 17 of 21
Confidential Document
5.4. GPS Performance for Installation
The AX5 determines its position by communicating with the Global Positioning Satellites through internal GPS
antenna. The location chosen of the AX5 will have a lot to do with the overall performance of the GPS receiver.
The AX5 device has internal GPS antenna but it is not a water proof design. Therefore, it shall be interior
installed. Please note that the following interior conditions may cause bad GPS reception of AX5:
Your vehicle has metallic window tint
Your vehicle has a windshield mounted radio antenna
Your vehicle has a solar reflective window
The AX5 installation direction shall be considered as well. Please see the following figure:
Sky
GPS Antenna
Good for GPS reception
DLC Connector
Acceptable
Bad for GPS reception
The AX5 used the latest GPS autonomous technology which accelerates GPS positioning by capitalizing on
the periodic nature of GPS satellite orbits. GPS orbit predictions are directly calculated by the GPS receiver
and no external aiding data or connectivity is required. Therefore, more satellites received are benefit for GPS
fix under low signal environment for the next 3~4 days.
© ATrack Technology Inc. All Rights Reserved.
Page 18 of 21
Confidential Document
5.5. Simple Verification for Installation
When the device is configured and first plugged into the OBD port. The AX5 will have some buzzer indications
for basic function test. The user can simply to verify if the AX5 device is installed properly.
Buzzer Indication
Description
Beep 1 time
Device Power ON
Beep 2 times
OBD Protocol Connected
Beep 3 times
GSM/GPRS Connected
Beep 4 times
GPS Fix
© ATrack Technology Inc. All Rights Reserved.
Page 19 of 21
Confidential Document
6. Appendix
6.1. Hardware Specification
AX5
GSM/GPRS Specification
GSM Module
Quad band (850/900/1800/1900MHz)
Communication
SMS/USSD/GPRS /TCP/UDP
GSM Antennas
Internal Type
GPS Specification
GPS Receiver
50 Channels, L1 Band, C/A Code
Sensitivity
-159dBm
Accuracy
2.5m CEP
Assisted GPS
Supported
OBD-II Specification
Supported Protocol
ISO 15765-4 (CAN)
ISO 14230-4 (KWP2000)
ISO 9141-2 (Asian, European, Chrysler vehicles)
SAE J1850 VPW (GM vehicles)
SAE J1850 PWM (Ford vehicles)
Electrical Characteristics
Power Source
Power Consumption
8-20 VDC
Operational
140 mA @ 12VDC (Average)
Sleep
18 mA @ 12VDC
Deep Sleep
<2 mA @ 12VDC
Mechanical Specification
Dimension
50 x 46 x 25 mm
OBD Connector
SAE J1962 Type A
Weight
54g (Include OBD Option)
Environmental Characteristics
Operation Temperature
-25 ~ +70°C
Storage Temperature
-40 ~ +85°C
Humidity
5 ~ 95%
© ATrack Technology Inc. All Rights Reserved.
Page 20 of 21
Confidential Document
6.2. FCC Regulations:
z This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
z This device has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiated radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
4RF Exposure Information
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
z This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In
order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to
the antenna shall not be less than 20cm (8 inches) during normal operation.
© ATrack Technology Inc. All Rights Reserved.
Page 21 of 21

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : user
Create Date                     : 2012:01:12 17:57:03+08:00
Modify Date                     : 2012:04:05 09:47:40+08:00
Source Modified                 : D:20120112095555
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : Acrobat PDFMaker 8.1 for Word
Metadata Date                   : 2012:04:05 09:47:40+08:00
Document ID                     : uuid:8c64ba50-0c37-45fb-873b-e3a52f5766d6
Instance ID                     : uuid:33297784-42bb-4698-a017-95ae87f99cc4
Subject                         : 103
Format                          : application/pdf
Creator                         : user
Title                           : AX5 User Manual
Page Layout                     : OneColumn
Page Count                      : 21
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YA7-ATVT1140

Navigation menu