AUDIO PRO T5 ACTIVE WIRELESS LOUDSPEAKER User Manual T5 quickguide 155x100 SE EN DE indd

AUDIO PRO AB ACTIVE WIRELESS LOUDSPEAKER T5 quickguide 155x100 SE EN DE indd

UserManual.wiki >

User Manual

BAKSIDA | REAR VIEW | RÜCKSEITEPARA | PAIR | KOPPELNSTANDBY LÄGE | STANDBY MODE | STANDBY MODUSStandby läge Standby mode Standby-ModusBlinkarFlashes BlinkenInställningarSettingsEinstellungenMAX 1000mA1. 2.5-20s20min › ZzzAlltid tillgänglig Always selectableImmer wählbarSE: Snabbstartsguide EN: Quick Start Guide DE: Schnellstart-AnleitungADDON T5ON/STBYAUDIO PRO T5KONTROLLER | CONTROLS | SCHALTTAFELPå/Av On/Off Ein/AusPara BluetoothPair Bluetooth Koppeln BluetoothVälj ljudkällaSelect source Quelle auswählenVolymkontrollVolume control Lautstärkeregelung© Audio Pro AB SverigeAudio Pro® , Audio Pro logotypen, ‘a’ symbolen, och ace-bass® är registrerade varumärken av Audio Pro AB, Sverige. Alla rättigheter reserverade. Audio Pro följer en policy om ständig produktutveckling. Speciﬁkationer kan ändras utan föregående meddelande. © Audio Pro AB SwedenAudio Pro®, the Audio Pro logotype, the ‘a’ symbol, and ace-bass® are all registered trademarks of Audio Pro AB, Sweden. All rights reserved. Audio Pro follows a policy of continuous advancement in development. Speciﬁcations may be changed without notice. www.audiopro.com | www.audiopro.sewww.facebook.com/audioproT5_quickguide_155x100_SE_EN_DE.indd 1 2016-07-01 08:39

Important Safety Instructions 1. Read these instructions – All the safety and operating instructions should be read before thisproduct is operated. 2. Keep these instructions – The safety and operating instructions should be retained for futurereference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions shouldbe adhered to. 4. Follow all instructions – All operating and use instructions should be followed.5. Do not use this apparatus near water – The appliance should not be used near water ormoisture – for example, in a wet basement or near a swimming pool, and the like. 6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacture’sinstructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plughas two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, conveniencereceptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or soldwith the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatushas been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. This apparatus shall not be exposed to dripping or splashing water and that no object filledwith liquids such as vases shall be placed on the apparatus. 16. Main plug is used as disconnect device and it should remain readily operable duringintended use. In order to disconnect the apparatus completely, the main plug should be disconnected from the main socket outlet completely. 17. To reduce the risk of fire or electric shock, do not expose this apparatus to rain ormoisture.

18.This equipment is a Class II or double insulated electrical appliance. It has beendesigned in such a way that it does not require a safety connection to electrical earth. 19. - This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. - Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. - The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. : Thissymbolontheproductorintheinstructionsmeansthatyourelectricalandelectronicequipmentshouldbedisposedattheendofitslifeseparatelyfromyourhouseholdwaste.ThereareseparatecollectionsystemsforrecyclingintheEU.Formoreinformation,pleasecontactthelocalauthorityoryourretailerwhereyoupurchasedtheproduct.–minimum5cmdistancesaroundtheapparatusforsufficientventilation;–theventilationshouldnotbeimpededbycoveringtheventilationopeningswithitems,suchasnewspapers,table‐cloths,curtains,etc.;–nonakedﬂamesources,suchaslightedcandles,shouldbeplacedontheapparatus;–theuseofapparatusinmoderate /tropicalclimates.20.

FCC Warnning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user’s authority to operate this equipment Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The distance between user and products should be no less than 20cm

Navigation menu