Aukey E Business BR-C8 Bluetooth Car Kit User Manual BR C8

SHENZHEN AUKEY E BUSINESS CO., LTD. Bluetooth Car Kit BR C8

User Manual

4.1Thank you for choosing Aukey BR-C8 Bluetooth car kit. Please read the user - 01 - - 02 - - 03 - - 04 - - 05 - - 06 -Introductionmanual carefully and save it for future reference. If you need assistance, please contact Aukey support by email to support@aukey.com with details. Package Content ● 1 x Aukey BR-C8 Wireless Portable Car Audio Receiver● 1 x Dual Port USB Car Charger● 1 x Extra sticky gel pad● 1 x User ManualSpecificationsStandardSupported ProfilesOperation RangeA2DP, AVRCP33 ft / 10mProduct Overview 1. Multi-function Button2. Mic 3. Previous Track 4. Next Track 5. LED Indicator6. Sticky Gel Pad 7. 3.5 mm Audio Output8. USB power connectorGetting StartedSetting up the receiver1. Place the receiver at desired location using the sticky gel pad.2. Plug the car charger into your cigarette lighter and power the receiver using the USB connector. 3. Connect the receiver to your car stereo AUX port using the 3.5 mm connector.Power on/offConnect the receiver power to the cigarette lighter charger. The unit automatically power on when you start your vehicle engine and automatically power off when you turn off your vehicle. You can manually power off the receiver by disconnect the USB from the charger.Note: When the receiver is turned on, you can manually turn off the receiver by pressing and holding the multi-function for 5 seconds. If you want to restart the receiver, press and hold the multi-function for 3 seconds.Pairing to new device 1. When you start your vehicle, the receiver will automatically turn on 2. If you have not paired the receiver with any device, it will automatically go into pairing mode with white White LED flashing 3. Bring your device into pairing mode and search for connection 4. “Aukey BR-C8” should appear in the search result 5. Tap on the name to connect 6. Once pairing is successful, the white LED will stay onNote: 1. If a code or pin is required for pairing, please enter “0000”.2. The receiver will stay in pairing mode for 10 minutes at most if no pairing device is found. Afterwards, it will power off automatically. If you want to restart the receiver, press and hold the multi-function for 3 minutes.3. When the receiver is successfully connected with one device, simultaneously press and hold the << and >> button for 2 seconds, the receiver will switch to pairing mode.Pairing with connected devices If you have successfully paired the receiver with your device previously, simply bring your device into pairing mode. The receiver will pair to your device by itself. Streaming music Play/PauseNext / Previous TrackPress the multi-function button oncePress the <<or >> button onceCalls ControlThe receiver has a built-in microphone for making/answering phone calls.Answer a callEnd a callRedial last numberReject an incoming callMute / Resume a callVoice SwitchingPress the multi-function button oncePress the multi-function button onceLong press the >> button for 2 secondsPress and hold the multi-function button for 2 secondsDuring a call, press and hold the << button for 2 secondsDuring a call, Press and hold the multi-function button for 2 seconds to switch between the receiver and your phone for talkingFAQQ: The receiver does not turn on after starting my car.● Make sure the USB cable is plugged into the car charger● Make sure the car charger is connected to cigarette lighter Q: I am having trouble pairing and connecting to my device● Make sure your device supports A2DP● Check if the receiver is in pairing mode (white LED flashing)● Take your device closer to the receiver and make sure your device is into paring mode.● If your device is asking for a “PIN” or “Code”, please enter “0000”Q: I cannot hear any music from my sound system.● Make sure the receiver is connected well with your car audio system via AUX input● Check your sound system settings to ensure that you have selected “AUX” or “Line-in” setting● Volume is at an audible level on both your audio device and on your sound system● Please check your audio device is playing music through connectionQ: The music sometimes cuts off while playing.● Make sure your phone/music player is in direct line of sight from the receiver. Q: There is a delay in the music.● A variable delay exists between when the music is played on your device and when you hear the sound from speakers. This is completely normal.Q: Can I power the receiver using another charger/power source?● We recommend using the car charger inside the package to power the receiver. However, you can still use another charger / USB power source to power the receiver. Care and Maintenance● For driving safety, we recommend place the receiver at a convenient spot where you can reach easily with your arm.● Avoid placing the receiver in high temperature areas● Do not use chemicals or detergents to clean the productWarrantyWe warrant this device for 24 MONTHS from date of the original purchase. If the device fails due to a manufacturing defect, please contact Aukey support by emailing to support@aukey.com with your purchase order ID and details of the problem. If you have purchased the product from a seller other than Aukey, please contact your seller for warranty cover. ContactFor additional assistance or warranty cover claim, please contact us:E-mail: support@aukey.com (all enquires)Website: www.aukey.com Wireless Portable Car Audio Receiver AUKEY INTERNATIONAL LIMITEDWeb: www.aukey.com E-mail: support@aukey.comAdd: No.102, Building P09, Electronic Trade CenterHuanan City, Pinghu Town, Longgang DistrictShenzhen, Guangdong 518111 CN Instruction Manual①②④③⑤⑥⑦⑧Note：You can't adjust the volume from the receiver when streaming music and answering a call. Please adjust the volume from your mobile phone or car audio system directly.Aukey BR-C8FCC ID:2AFHPBR-C8
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu