Abocom Systems BHC110 Bluetooth Headset User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	690177
Application ID	u3WFMav0EAoQBcCbQMzNNA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.5kB (56279 bits)
Date Submitted	2006-08-04 00:00:00
Date Available	2006-08-04 00:00:00
Creation Date	2006-04-21 16:01:05
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2006-08-03 11:31:48
Document Title	Microsoft Word - BHC110 Quick User Guide 2006-04-21.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Brook

BHC110 -- Bluetooth Headset
Quick Installation Guide
Buttons
Follow the instruction form the phone user guide on
Placing and Receiving Calls
Your headset supports both Hands-free and
how to turn on the Bluetooth in your phone. With the
Headset Profiles. Accessing call functions depends on
headset and phone in close proximity:
which profile your phone supports.
your phone it has to be added once to the phone.
1.
Make sure the headset is in power off. Press the
Action
Function
power button for 6 seconds until the blue and red
Very Long Press Power
Pairing
LED flashes.
2.
Initiate the pairing sequence using hands-free
Power On
Long Press Power
mode if available. The unit may also be paired in
Reject a Call
headset mode if hands-free mode is not available.
Receive a Call
3. Perform a device discovery from the phone.
Short Press Power
For details on device discovery for your phone,
Select the Mono Headset from the discovered
Starting to Use
devices list, and then confirm following the on
How to Charge
screen prompts.
Plug the charger into the headset. Plug the other
5.
End a Call
Voice Dial
refer to the user guide for the phone.
4.
Power Off
Long Press Redial
Redial
Call Transfer
Short Press Redial
Mute On
Mute Off
When prompted by the phone, enter the passkey
end of the charger into an electrical outlet. During the
0000, and then confirm to pair the headset with
charging, the red LED turns on and remains on until
the phone.
charging is complete. When charging is complete (red
Using Your Headset Indicators
LED
Headset
OFF
Power Off
LED is off), remove the charger form the electrical
Controlling Headset Volume
Red/Blue rapid flashes
Pairing mode
outlet and detach the charger from the speaker.
Increase: Press the volume button in the + position
Blue flashes
Power On
repeatedly until you reach the desired volume level.
Red On
Charging
Red flashes
Power Low
Red flashed 5 times
Powering Off
Pairing Your Headset and Phone
Decrease: Press the volume button in the - position
Before you can use your Bluetooth headset you’re
repeatedly until you reach the desired volume level.
Troubleshooting
Q: No connection to phone
A: Make sure the headset is charged and within
range of the phone. Check or redo the Bluetooth
setting in the phone.
Q: The headset is automatically switched off
A: The battery is too low. The indicator light on
the headset flashes red.
Q: Unexpected behavior
A: Recharge the headset. The headset will reset
when recharging the headset
Q: Battery capacity
A: A battery that has been infrequently used or a
new one could have reduced capacity. It may
need to be fully recharged and discharged a
number of times.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2006:04:21 16:01:05+08:00
Modify Date                     : 2006:08:03 11:31:48+08:00
About                           : uuid:36bc32b7-4d96-4801-9c66-c7f9b5f997eb
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Creation Date                   : 2006:04:21 16:01:05+08:00
Mod Date                        : 2006:08:03 11:31:48+08:00
Author                          : Brook
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2006:08:03 11:31:48+08:00
Document ID                     : uuid:75d9d291-66f0-40ab-862c-56658ef26f5d
Instance ID                     : uuid:a05530ec-c7a1-41f0-bb51-a060ea2da072
Format                          : application/pdf
Title                           : Microsoft Word - BHC110 Quick User Guide 2006-04-21.doc
Creator                         : Brook
Page Count                      : 3

EXIF Metadata provided by EXIF.tools