Abocom Systems CA2000 LAN Router User Manual
Abocom Systems Inc LAN Router
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 65897 |
| Application ID | 46YPte7lifXIWeV/CtNuhQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 39.07kB (488421 bits) |
| Date Submitted | 1999-10-22 00:00:00 |
| Date Available | 1999-12-22 00:00:00 |
| Creation Date | 1999-10-22 12:46:12 |
| Producing Software | Acrobat 4.0 Scan Plug-in for Windows |
| Document Lastmod | 1999-10-22 12:46:58 |
| Document Title | User Manual |
| Document Creator | Acrobat 4.0 Scan Plug-in for Windows |
INSTRUCTIONS MANUAL
FEDERAL com/[UNTCATTONS comuSSTON FCOTD I MQL; 0A 2175?
lNTERFERENCE STATEMENT
This equipment has been teszed and found to comply with the limits for a Class B
diwital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection a~ 'nst harmful interference in a residential installation
This equipment generates, uses and can radiate radio frequency energy and. if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference Will not
occur in a particular instullation If this equipment does cause harmful interference to
radio or television reception. which can be determined by turning the equipment ct?"
and on, the user is encouraged to try to correct the interierence by one or more ot'
the following measures.
-- Recrient or re!ocate the receixi.
inc
-- Increase the separation bet-need "he -
~ -- Cornec: he euipment into an outlet on a circuir c'it‘t‘erent from that to
' ch the retainer is connec
-- Cons-
ntcrnn {or help
es or mod
This dexice complies with Pu.
Operation is mine; "3
the foilow luse harmfiul interfe'enxt
rt mo conditions (i)
and (2) this deuce must accept 1
use undes‘mei cpe
”t" l”i3:7:7ill€€ ffi‘lffl EL:
User’s Guide for CA2000 Installation
Version 1.0
1 999/ 1 0/04
Chapter 1 Introduction
As Internet is getting popular, broadband revolution speed up the access speed.
More people are willing to surf on Internet. But IP address is a limited resource.
Using CA2000, users on local area network can access Internet simultaneously by
sharing only single IP address.
Chapter 2 Requirements & Environment
Hardware requirements
I. An well-connected Ethernet local area network
2. A well-installed Cable Modem or ADSL Modem
3. One CA2000 including power adapter
4. One UTP Ethernet cross-over cable (shipped with package) connects from
CA2000 Global port to Cable/ADSL Modem’s RJ-45 connector.
5. One CAT3 or 5 UTP Ethernet straight cable connects from CA2000 Local port
to a free port on Ethernet Switch or HUB.
6. An RS-232 male to female straight cable connects from CA2000 Console port
to one of PC COM ports.
Software requirements
Microsoft Windows 95/98/NT installed
Terminal emulation program such as Windows Hyperterminal.
Information from ISP
If your ISP assign you IP address dynamically, then you have to prepare nothing.
If your ISP assign you one IP address or a set of [P addresses, please list these IP
addresses:
For example:
Your IP address: 202.178.230.113
Neighbor IP address: 202.178.231.l
DNS sewer: 202.178.225J
Secondary DNS server: 202.178.244.207
Chapter 3 Start Installtion
Make sure you have all devices and cables well-connected as previous chapter
described And CA2000 is powered on.
Configure your PC first
1. Please click Start\Setting(§)\ControlPanel@_)
2. Double click on Network icon.
3. Select the binding of TCPIP and your Ethernet adapter, and click on the Property
button.
4. Check the item of :”Obtain IP address automatically”
5. Remove any IP address in DNS and Gateway setting
6. Restart your PC.
If your ISP assign you IP address dynamically, now you are already able to access
Internet. Otherwise, go on the installation procedures.
Configure CA2000
Please
i. connect a RS-2322 cable from one COM port on your PC to CA2000 Console port.
2. Run Terminal Program and set the COM port in 38400 kbps, No parity, 8 bit data, 1
stop bit, and No flow control.
3.Tum on CA2000. You will see following messages through Terminal program.
Internet SOAR - Internet sharing device for small office
System BIOS Version : 1.10 (1999/10/10)
(C)Copyrights 1999, all rights reserved.
WAN NIC Test ........ 0 MAC Address: 00 40 05 44 60 26
LAN NIC Test .........0 MAC Address: 00 40 05 27 63 42
Internet SOAR is ready
System starts up
Welcome to SOAR 1.60
Administrator password :
4. Press ENTER key to enter Configure mode. You will see the command prompt
SOAR>
5.type SET command to confugre CA2000.
Press if you agree with the default value,
or to escape.
IP address for local [19216801] :
IP netmask for local [255.255.2550] :
Distribute config for PCs on LAN 7(Yes/No) [Yes] :
Distribute IP address pool start at [19216802] :
Dl-lCP IP address pool numbers [32] :
Obtain conflg automatically ?(Yes/No) [Yes] :N
IP address for 10M wan 1 [0.0.0.0]: 202.178.230.113
IP mask for 10M wan : [255.255.2550]
Device name (0 to 12 characters) : CA2000
Default gateway Router [0.0.0.0] : 202.178.2311
Primary DNS server [0.0.0.0] : 202.178.225.1
Secondary DNS server [0.0.0.0] : 202.178.2441207
New config will be:
IP address for 10/100M LAN : [192,168,011
lP mask for 10/100M LAN : [255.255.2550]
Distribute config for PCs on LAN : [Yes]
Distribute IP address pool start at : [192116802]
DHCP IP address pool numbers : [32]
Obtain config automatically : [No]
[P address for 10M wan : [202.178.230113]
IP mask for 10M wan : [255.255.2550]
Device name : [CA2000]
Default gateway's : [202.178.23l.1]
Primary DNS server : [202.178.2251]
Secondary DNS server : [202.178.244207]
Save this configuration,and reboot device ?
(Yes/No) : Y
Save configuration and reboot
Now you have completed the installation. You can try to run Internet applications
for fast Intemet access.
Chapter 4 Command Set
1. HELP or ?
List all commands with short descriptions,
Example:
SOAR>?
Command Description
help Show this message
passwd Change administrator's password
show Display current configuration
set Config this device in batch
release Free the obtained configuration
renew Request network configuration again
quit Exit this terminal program
reboot Restart device
2. PASS WD
Change administrator password.
Example:
SOAR>passwd
Please type old password :
type new password (1 to 4 characters) : ****
re-type new password (1 to 4 characters) : ****
Password has been changed.
3.SHOW
Display current configuration.
Example:
SOAR>show
IP address for 10/100M LAN : [192.168.01]
IP mask for 10/100M LAN : [255.255.2550]
Distribute config for PCs on LAN : [Yes] ...... W)
Distribute IP address pool start at : [192.168.02]
DHCP IP address pool numbers : [32]
Obtain conflg automatically : [Yes] ,. Config claimed ......
IP address for 10M WAN : [2021178231104]
IP mask for 10M WAN : [255.255.2550]
Device name : [Untitled]
Default gateway‘s : [202.178.231.1]
Primary DNS server : [202.178.2251]
Secondary DNS server : [202.178.244207]
*“): If the “distribute configuration" function is enabled, the followed two parameters
will be shown. Otherwise, they are invisible.
If you can see “Config claimed" appended, CA2000 is ready for Internet access.
If you see “Config claiming” appended, the Global port configuration is still
under request.
“42>: If the “obtain configuration“ function is enabled, the followed two parameters
will be shown as claimed.
4.SET
Configure CA2000 about Local port, Global port, DHCP setting, etc.
Example:
SOAR> set
Press if you agree with the default value,
or to escape.
IP address for local [19216801] :
IP netmask for local [25525542550] :
Distribute config for PCs on LAN ?(Yes/No) [Yes] :
Distribute IP address pool start at [19216802] :
Dl-ICP IP address pool numbers [32] :
Obtain conflg automatically ?(Yes/No) [Yes] :
Device name (0 to 12 characters) : CA2000
Default gateway Router [0.0.0.0] : 202.178.231.1
Primary DNS server [0.00.0] : 202.178.225.1
Secondary DNS server [0000] : 202.178.244.207
New config will be:
IP address for 10/100M LAN : [192.168.01]
IP mask for 10/100M LAN: [2552552550]
Distribute config for PCs on LAN : [Yes]
Distribute IP address pool start at : [19216802]
DHCP IP address pool numbers : [32]
Obtain config automatically : [Yes]
Device name : [CAZOOO]
Default gateway's : [202.178.2311]
Primary DNS server : [2021782251]
Secondary DNS server : [202178244207]
Save this configuration,and reboot device ?
(Yes/No) : Y
Save configuration and reboot
5.RELEASE
If the “obtain configuration“ function is enabled, this command will
clear those claimed configuration parameters.
Example:
SOAR> release
Free the obtained configuration !!
6. RENE W
If the “obtain configuration“ function is enabled, this command will
claim configuration parameters again Those parameters are Global port IP
address, lease time, default gateway, primary DNS IP address, secondary DNS IP
address, and lease time.
Example:
SOAR>renew
Request network configuration again !!
7.QUIT
Escape from this configure mode A User has to input Management password
to back to configure mode.
Example:
SOAR>quit
Welcome to SOAR terminal program
Administrator password :
8.REBOOT Restart whole system
Example:
SOAR>reboot
Chapter 5 Firmware Upload
Hardware Requirements:
1. A PC with at least one available COM port.
2. A pin—to-pin RS—232 cable( UTE-DCE ): one end is DB~9 male connector,
the other end is whatever depends on your COM port.
Software Requirements:
1. FWUPLDAD.EXEADOSprogram for firmware upload. You can run it directly
from Windows NT/95 also.
2. FIRMWARE.BINThe firmware image file. This file name MUST be exactly
the same one. And it MUST be put together with FWUPLDADEXE. in the
same subdirectory. For better disk access speed, we suggest you copy
these two files in your hard disdk before upload.
Upload procedures
1. Connect CA2000 and your PC COM port with the RS-232 cable.
2. Run the FWUPLOADEXE with COM port specified. You can type ”FWUPDOAD
-?" first to view the usage.
3.Turn on the CA2000. FWUPDOADEXE can automatically detect CA2000 and
complete the upload. You will see messages appear in following sequence:
CA2000 - Firmware upgrade program ver 1.0.
Copyright 1999.
FWUPIDAD -? for usage help.
press to abort this program.
Waiting for CA2000 turned on . . .
CA2000 has been detected.
Ready for upload.
Uploading . . .
32768 bytes transmitted
OK: Firmware upload succeeded.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 1999:10:22 12:46:58-04:00 Create Date : 1999:10:22 12:46:12-04:00 Creator : Acrobat 4.0 Scan Plug-in for Windows Producer : Acrobat 4.0 Scan Plug-in for Windows Page Count : 9EXIF Metadata provided by EXIF.tools