Abocom Systems WCM6002 802.11a/b/g Wireless MiniPCI Card User Manual WCM6002 English QIG032706
Abocom Systems Inc 802.11a/b/g Wireless MiniPCI Card WCM6002 English QIG032706
Users Manual
802.11a/b/g Wireless LAN
Mini PCI Card
Quick Install
Caution
This Quick Installation is meant to help you install the product quickly and easily.
For detailed instructions on installation, configuration, and further setup options
please consult the User Manual.
STEP
11
STEP
22
Software Installation
Hardware Installation
2The main screen of the CD-
ROM opens. Select Install
Driver &Utility to start the
installation.
3When the License Agreement
screen appears, click Ye s to
accept and continue.
4Click Finish to complete the
software installation.
Exit all Windows programs. Insert the CD-ROM into the
CD-ROM drive of your computer. If the CD-ROM is not
launched automatically, go to your CD-ROM drive (e.g.
drive D) and double-click on Setup.exe
1
1
2
3
STEP
33
Installation Verification
Make sure the computer is turned off. Remove the
expansion slot cover from the computer.
Carefully slide the Wireless mini PCI Card into the mini
PCI slot. Push evenly and slowly and ensure it is properly
seated.
After the device has been installed to your computer, turn
on your computer. Windows will detect the new hardware
and then automatically copy all the files needed for
networking.
STEP
44
Using the Utility
All settings are categorized into SIX tabs, including Profile Tab,
Link Status Tab, Site Survey Tab, Statistics Tab, Advanced Tab
and About Tab
Profile Tab
4Click Continue Anyway to
continue the software
installation.
To verify that the device has been properly installed in your
computer and is enabled, go to Start Settings Control
Panel System (Hardware) Device Manager
Expand the Network adapter item, if the Wireless :AN Crad - A/B/G
is listed, it means that your device is properly installed and enabled
Profiles can bookkeeping your favourite wireless settings among
your home, office and other public hotspot. You may save multiple
profiles, and activate the correct one at your preference.
Site Survey Tab
The Site Survey screen displays a list of infrastructure and ad-hoc
networks available for connection.
Statistics Tab
The Statistics screen displays the statistics on your current network
settings.
Advanced Tab
AboutTab
M73-APO11-220
Link Status Tab
The Link Status screen displays the Link Quality, Signal
Strength and some other current linking information.
The Advanced tab lets you configure the advanced wireless settings
including wireless security settings.
The About screen dispalys the basic version information about the
Configure Version, Driver Version, EEPROM Version, Firmware
Version.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users,
and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required. However,
theOEM integrator is still responsible for testing their end-product for any additional
compliance requirements required with this module installed (for example, digital device
emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain
laptop configurations or co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID can not be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed
such that 20 cm may be maintained between the antenna and users. The final end product must
be labeled in a visible area with the following:“Contains TX FCC ID: MQ4WCM6002”.
Manual Information That Must be Included
The users manual for OEM integrators must include the following information in a prominent
location “ IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements,
theantenna used for this transmitter must be installed to provide a separation distance of at least
20cm from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.