Acco Brands Electric Heater H212 Users Manual

262085-Attachment 262085-Attachment 262085-Attachment 782644 Batch12 unilog cesco-content

H212 to the manual 3879452a-3726-4bf8-b810-fe4365a87c06

: Acco-Brands Acco-Brands-Electric-Heater-H212-Users-Manual-503875 acco-brands-electric-heater-h212-users-manual-503875 acco-brands pdf

Open the PDF directly: View PDF .
Page Count: 6

G

Instruction Manual

F

Manuel d’utilisation

D

Bedienungsanleitung

I

Manuale d’istruzioni

O

Gebruiksaanwijzing

E

Manual de instrucciones

P

Manual de Instruções

T

Kullanım Kılavuzu

K

Οδηγίες

c

Brugsvejledning

o

Käyttöopas

o

Bruksanvisning

S

Bruksanvisning

Q

Instrukcja obsługi

o

Návod k obsluze

H

Használati útmutató

o

Руководствo по

зкcплyатации

NO

FI

CZ

RUS

HeatSeal

H212/H312

with SureFlow™ Technology

English 4

Français 6

Deutsch 8

Italiano 10

Nederlands 12

Español 14

Português 16

Türkçe 18

Ελληνικά 20

Dansk 22

Suomi 24

Norsk 26

Svenska 28

Polski 30

Česky 32

Magyar 34

Pyccкий 36

7

1

4

2

5

6

3

4

Special notice

Thank you, for your recent purchase of a GBC Pouch Laminator. Your

new laminator may emit a slight odour during the initial stage of

operation. It is normal and will diminish after several hours of operation.

Service

• Do not attempt to service or repair the pouch laminator yourself.

Unplug the unit and contact an authorised ACCO Brands Europe

service representative for any required repairs.

Electrical safeguards

• The unit must be connected to a supply voltage corresponding to the

electrical rating shown on the unit.

• Unplug the unit before moving it, or when it is not in use for an

extended period of time.

• Do not operate with a damaged supply cord or plug. Do not alter the

attachment plug. The plug is configured for the appropriate electrical

supply.

• Do not overload electrical outlets beyond their capacity; fire or

electrical shock could result.

• The unit is intended for indoor use only.

• Never push objects through the cabinet slots. Do not spill liquid of any

kind on this product.

• Close supervision is required when this product is used near children.

General safeguards

• Use the unit only for its intended purposes of laminating documents.

• Do not place anything in the throat opening of the laminator other than

pouches/documents.

• Place unit on a secure, stable work area to prevent the unit from

falling and possibly causing personal injury and damage to the unit.

• Follow all warnings and instructions marked on the unit.

• The socket outlet shall be installed near the equipment and shall be

easily accessible.

• Do not attempt single side lamination, this will destroy the laminator.

• Do not block the vent slots, this will cause the laminator to overheat.

The following ISO and IEC symbols appear on this product, and their

meanings are as follows:

HeatRelease

ColdOn / Off

THIS WARNING IS FOUND ON THE PRODUCT.

Electrical shock hazard.

Do not open. No user

servicable parts inside.

Refer servicing to qualified

service personnel.

WARNING

m

c

This safety message means that you could be seriously hurt or killed if

you open the product and expose yourself to hazardous voltage.

THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY

MESSAGE IN THIS INSTRUCTION MANUAL.

THIS SYMBOL INDICATES A POTENTIAL PERSONAL

SAFETY HAZARD THAT COULD HURT YOU OR OTHERS,

AS WELL AS CAUSE PRODUCT DAMAGE OR PROPERTY

DAMAGE.

m

Safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT

TO ACCO BRANDS EUROPE. IN THIS INSTRUCTION MANUAL AND ON

THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE

MESSAGES CAREFULLY.

m

WARNING: FOR YOUR PROTECTION DO NOT CONNECT

THE POUCH LAMINATOR TO ELECTRICAL POWER UNTIL

YOU READ THESE INSTRUCTIONS COMPLETELY. KEEP

THESE INSTRUCTIONS IN A CONVENIENT LOCATION FOR

FUTURE REFERENCE. TO GUARD AGAINST INJURY, THE

FOLLOWING BASIC SAFETY PRECAUTIONS MUST BE

OBSERVED IN THE SET-UP AND USE OF THIS PRODUCT.

m

Important safeguards m

Caution: Unplug this product before cleaning.

• Wipe exterior only with a damp cloth. Do not use detergents

or solvents.

• Do not use aerosol dusters or cleaners.

• Do not spray anything into the machine.

m

Cleaning

Specifications

GBC HeatSeal H212

230V / 50hZ / 2Amps / 500W

400 x 173 x 117.5mm

3.1kg

241mm

2 x 125 mic (Total 250)

0.8mm

5 minutes

Electrical

Machine Dimensions

Machine Weight

Maximum Pouch Width

Maximum Pouch Thickness

Maximum Thru-put Thickness

Warm-Up Time (2 x 75 mic)

GBC HeatSeal H312

230V / 50Hz / 2Amps / 500W

476x173x117mm

3.9kg

318mm

2 x 125 mic (Total 250)

0.8mm

5 minutes

5

G

Operation, hot lamination

1 Connect power cord to appropriate power source.

2 Push the power button to turn the power “ON” (fig. 2). The

indicator will glow red.

3 Using the lamination guidelines (fig. 3), select the appropriate

temperature setting for the pouch gauge thickness and material you

are laminating.

• If the laminated item appears to be cloudy, it means that the

laminator temperature is not hot enough. Allow the laminator to

heat for a few more minutes then run the pouch through again.

• If the laminated item is wavy, the TEMPERATURE is too hot. Verify

temperature selector is set at the appropriate temperature.

• Always allow sufficient time for the laminator to adjust to changes

in temperature setting.

4 A series of four beeps will be heard when laminator reaches

operating temperature.

5 Position the document to be laminated into a GBC laminating pouch,

so that the document is aligned to the folded sealed edge and the

right and left borders are equal (fig. 4).

6 Insert the pouch and its contents straight into the machine, leading

with the folded edge.

7 The laminated item will automatically exit the rear of the machine.

After the pouch has stopped moving, immediately place it on a flat

surface to cool for one minute before handling (fig. 5).

8 If you have finished laminating, push the switch to turn “OFF” the

machine.

DO NOT LAMINATE AN EMPTY POUCH

Guarantee

Operation of this machine is guaranteed for two years from date of

purchase, subject to normal use. Within the guarantee period, ACCO

Brands Europe will at its own discretion either repair or replace the

defective machine free of charge. Defects due to misuse or use for

inappropriate purposes are not covered under the guarantee. Proof

of date of purchase will be required. Repairs or alterations made by

persons not authorised by ACCO Brands Europe will invalidate the

guarantee. It is our aim to ensure that our products perform to the

specifications stated. This guarantee does not affect the legal rights

which consumers have under applicable national legislation governing

the sale of goods.

Register this product online at www.accoeurope.com

Helpful lamination hints

1 Temperature setting Guidelines:

When laminating thin paper with light ink coverage, set the

temperature dial at the low end of the range. Thick paper and heavy

ink coverage require higher settings. Temperature settings will vary

due to the finish, chemistry and heat absorption properties of the

material being laminated.

2 Before laminating important or unique documents always run a test

pouch through the laminator using a similar type document.

3 Do not attempt to do single sided lamination. This will destroy the

laminator.

4 As soon as the lamination is completed, remove from the rear of the

machine and place on a cool flat surface for cooling to prevent the

pouch from curling.

5 Do not block the vent slots, this will cause the laminator to overheat.

Release lever

How to use the release lever.

1 If pouch jams or is fed improperly, turn off the laminator immediately.

2 Press the release lever down to release the motor from the rollers

(fig. 6).

3 Pull your document back out of the laminator while pressing the

release lever down (fig. 7).

4 Clean the rollers by running the cleaning sheet supplied with the

laminator through the machine 2 or 3 times in the hot operation

mode (red zone on temperature dial). If you do not have this sheet,

use a similar cardboard sheet that fits the width of the laminator.

5 Continue laminating.

Operation, cold lamination

1 Connect power cord to appropriate power source.

2 Rotate the temperature dial to the “cold” position (fig. 2).

3 Push the power button to turn the power “ON” (fig. 2), the

indicator light will glow red.

4 A series of four beeps will be heard when the laminator is ready to

use.

5 Use and laminate your GBC cold pouch.

(Pressure sensitive—non-thermal laminating pouch)

Important: Before operating your new laminator, lift up the exit tray located at the rear of the machine and lock it in place (fig. 1).

ACCO Brands Europe

Oxford House

Aylesbury HP21 8SZ

United Kingdom

www.accoeurope.com

Service

G

ACCO Service Division

Freepost 193, Hereward Rise, Halesowen, West Midlands, B62 8AN.

Tel: 0845 658 6600, Fax: 0870 4215576, www.acco.co.uk/service

ACCO UK Sales International

Oxford Road, Aylesbury, HP21 8SZ.

Tel: 00 44 1296 397444, Fax: 00 44 1296 311000

F

ACCO France

Service Aprés-Vente, 8 Rue du 19 Mars 1962, 21601 Longvic, Cedex BP7/ZI.

Tel: 0802 872 356, Fax: 03 80 68 60 49

O

ACCO Benelux

Peppelkade 64, 3992AK Houten.

Tel: 030-6346060, Fax: 030-6346070, info@accobenelux.nl, www.accobenelux.nl

B

ACCO Benelux (Technische Dienst)

Peppelkade 64, 3992AK Houten, Nederland.

Tel: 02-4117416, Fax: 02-4140784, info@accobenelux.be, www.accobenelux.be

D

ACCO Deutschland

o

Arnoldstrasse 5, 73614 Scorndorf, Germany.

H

Tel: +49 - 7181/887-160, Fax: +49 - 7181/887-165

o

XERTEC a.s.

U Továren 770/1b, 102 00, Praha 10.

Tel: +420 271 741 800, Fax: +420 271 743 143, www.xertec.cz

A

ACCO Österreich

Sallmann Bürotechnik GmbH, Esshaverstrasse 16, 5020 Salzburg.

Tel: 0662 4345 160, Fax: 0662 4345 164, e-mail: schinagl@sallmann.at

S

ACCO Schweiz

ABC Bürotechnik AG, Winkelbüel 4, 6043 Adligenswil.

Tel: 041 375 6060, Fax: 041 375 6061,

e-mail: bruno.zraggen@abc-buerotechnik.ch

c

Mailtech

Baldersbaekvej 8B 2635 Ishoj.

Tel: 045 43 73 37 37, Fax: 0045 43 73 73 37 07, e-mail: hs@mailtech.dk

N

Sannum & Stang

Gladengveien 16 0661 Oslo.

Tel: +4722685940, Fax: +4722686730, e-mail: post@sansta.no

I

ACCO Italia Spa

Via Nenni 13, Settimo Torinese (TO) Via Regio Parco 10B/bis.

Tel: 011 896 11 11, Fax: 011 896 11 12

o

ACCO-Rexel Ltd

Clonshaugh Business & Technology Park, Clonshaugh Dublin 17.

Tel: 01 816 4300, Fax: 01 816 4302

Q

ACCO Polska Sp. z o.o.

Al-Jerozolimskie 184, 02-486 Warszawa.

Tel: +42 22 570 18 01, Fax: +48 22 570 18 33

S

ACCO Nordic Region

Kontor 1, i norden AB Kanalvägen 16 194 61 Upplands Väsby.

Tel: 08 444 5191, Fax: 08 444 5199

o

Somen Huoltopalvelu oy

Kanaamouka 1 00360 Helsinki. Tel: 956 050 510, Fax: 956 050 500

E

ACCO Iberia SL

P

Isaac Peral 19, 28820 Coslada (Madrid). Tel: 91 669 9391, Fax: 91 672 07 11

g

Oddi

Höfdabakka 3-7 IS-112 Reykjavik. Tel: 00354 515 5000, Fax: 00354 515 5101

T

Eraysan

Ankara Cad N.129, Sirkeci, Istanbul.

Tel: 0090 212 6591686, Fax: 0090 212 5226992, eraysan@eraysan.com.tr

o

ACCO Australia Pty.

Level 2 Building B, 8 Lord Street, Botany. NSW. Australia 2019.

Tel: 2 9700 0180, Fax: 2 9700 0195

FI

IRE

RUS

AUS

CZ

Ref: H212H312/5276

Issue: 1 (01/07)