Accton Technology 018WN3301F PCMCIA Wireless LAN ard User Manual WN3301F MANUAL

Accton Technology Corp PCMCIA Wireless LAN ard WN3301F MANUAL

Contents

Manual 2

19 3-5 PROTOCOL INSTALLATION – WINDOWS® 98Before continuing with the Protocol installation consult your System Administrator for details aboutyour specific network. To install network protocols complete the following steps.1. From the “Control Panel” double-click the “Network” icon.2. Select “PRISM2 IEEE 902.11 PC Card Adapter” and click “Add”.3. Highlight “Protocol” and click “Add”
204. Select “Microsoft” from the list of “Manufacturers” and “TCP-IP” from the list of “NetworkProtocols”, click “OK”5. Select “TCP/IP “ and click “Properties”.Repeat step 2 – 5 to install other protocols such as Notebook or IPX/SPX.NOTE: The following steps apply to DHCP servers. Consult your system administrator forspecific information regarding your server type, and for help in specifying an IP address if you donot use a DHCP server and must manually enter the IP address and DNS number.
216. Check “Obtain an IP address…” and click “OK”. If you are using a DHCP server the IPaddress will be entered automatically.7. From the Network menu highlight “Client from Microsoft Networks”, and click" File andPrint Sharing”.
228. Check both boxes and click “OK”.9. Enter a “Computer name”, “Workgroup” and “Computer Description”, click “OK”
2310. Enter a “Computer name”, “Workgroup” and “Computer Description”, click “OK”11. You will be prompted to restart your computer, click “Yes” to complete the installation.Note: Please see the trouble shooting if you encounter some problem while installing the PC-Card card or your PC-Card is non-functional.
243-6 WN3301F SET UP FOR WINDOWS NT 4.0Login as Administrator1. From the desktop, select “Control Panel”, double-click “Network”, click “Adapters”, click“Add”2. Click “Have Disk”3. Insert the WN3301F disk; Windows NT will manually enter the path to the driver click“OK”.
254. Select your adapter from the list click “OK”.5. Click “Close” from the “Network” dialog, Windows NT will auto-bind the new adapter withany network protocols already installed on the system.
266. After the auto-binding procedure is complete, select “Properties” from the “Network”dialog. At this point you may choose to manually specify an IP address, or automaticallyobtain an IP address if you are using a DHCP server. Consult your Systems Administratorfor information about your server type, IP address settings and DNS number.7. After the settings configuration is complete, confirm that the “Computer Name” and“Workgroup” designations are correct, and click “OK”.

Navigation menu