Accton Technology WG4005ACC IEEE 802.11g mini-PCI Card User Manual Installation Guide for the RF Module

Accton Technology Corp IEEE 802.11g mini-PCI Card Installation Guide for the RF Module

User manual antenna installation

IEEE 802.11g 2.4GHz 54Mbps WirelessModule
Wireless Module
COPYRIGHTInformation furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice.Copyright © 2003 bySMC Networks, Inc.38 TeslaIrvine, CA 92618All rights reserved. Printed in TaiwanTrademarks:SMC is a registered trademark; and Barricade is a trademark of SMC Networks, Inc. Other product and company names are trademarks or registered trademarks of their respective holders.
Installation Guide for the RF Module This module has been authorized under FCC ID: HEDWG4005ACC under mobile module approval category. The integrator of this module has to be aware that this module can only be used in mobile host equipment such as Access Point or Router. The picture on left side is a wireless router which integrate this wireless module. The host equipment should provide an internal mini-pci interface for the main board of this module. Also the housing of the host equipment should provide a pair of antenna sockets for the installation of the diversity antennas. There are 3 pairs of antenna in this filing. The folded part of these antennas has to be fixed with the housing of the host equipment, which makes the end users impossible to remove the antenna unless destroy the housing. The photo of these antennas are shown below, also the folded part of each antenna type has been indicated. Folded Parts
Folded Parts

Navigation menu