Accusplit A940Mxt Users Manual
a940mxt 3fce5c66-4bf9-45ec-99be-8cda03eb7046 Accusplit Watch A940MXT User Guide |
2015-02-05
: Accusplit Accusplit-A940Mxt-Users-Manual-504100 accusplit-a940mxt-users-manual-504100 accusplit pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
ACCUSPLIT A940MXT S1/S4 S2 AC Wrist-Worn Stopwatch with Split Memory Operating Instructions SPLIT S 1/ L Master Reset Its a good idea to reset the stopwatch each time before use. Push S2 for 2 seconds to Reset** 940MX TURBO Event Timing Event timing is the simplest form of timing. It is good when you want to measure the total time from the start to the finish of a particular event. S2 – Start 0 00 0.000 DIST M 3 S 4 S 1/ S ∞ L L *For only chance to view Total Average Speed/Rate, push M. M M 3 S 4 S 1/ S ∞ p-hr AOS Lap Time 2 AOS EL S Display 2 L S Split Time 4 0:32:29.38 0:05:03. 1 1 CUSPLIT 4 AC SPLIT 3 CUSPLIT S AC S3 & M 925MX TURBO ∞ Split Counter EL EL Backlight Dual Split Memory with Split Counter Button When timing an activity with pauses or repeated events, you will need to When a Distance or Sample Count Is set use split timing with memories. In Turbo Set Up mode, “SPD” (Speed) S2 – Start (Shows Running DUAL Time) indicator will be illuninated at bottom of S2 – Split* (Top shows CUM 1, Bottom display. The number you enter should shows LAP 1) correspond to the Distance or Sample S2 – Split* (shows CUM 2, Bottom shows Count you want to use for the Speed LAP 2) or Rate Computation. “P-HR” in display S2 – Split* (Top shows CUM 3, Bottom means watch is set to compute “per shows LAP 3) Hour” rate, and “P-Mn” means watch is S2 – Split* (Top shows CUM 4, Bottom set to compute a “per Minute” rate. shows LAP 4) S2 (2sec) – Reset** If you want the watch to compute in “per *Split Counter always shows Current Split Sec” rate, divide the Distance or Sample Note: You can always press S1/S4 to return Count (Strokes, Strides, Units, etc.) by to Running Time. 60, then enter it. Memory Review (before Resetting) For example, let’s say that you are at a M – Review* (Bottom shows AVE LAP race track with a course that is one mile Split, Top shows TOTAL ELAPSED TIME) long. If you set the Distance to 1.00 and M – Review (Shows last DUAL Split) the rate to “P-HR,” and then time several M – Review (Shows next DUAL Split, in laps, the Average Speed recorded by the reverse order) watch will be in miles per hour. *Reviews at any time in reverse numerical order. Hold down for Rapid Review. Speed/Rate Function Operation S2 – Start (Shows Running LAP Time) STOPWATCH AND SPEED/RATE S2 – Split* (Top and Bottom show The advanced “Turbo” functions on SPEED/RATE 1/LAP 1) the watch calculate speed or rate once S2 – Split* (Top and Bottom show distance has been input into the watch SPEED/RATE 2/LAP 2) (recall that Rate = Units/Time). S2 – Split* (Top and Bottom show SPEED/RATE 3/LAP 3) Turbo S2 (2sec) – Reset LAP and SPEED/RATE Set up to zero** S STOPWATCH MODE The watch features a professional timing circuit with powerful stopwatch features. This is how the display looks when in stopwatch mode. AOS Your watch also has an Electro-Luminescent (EL) backlight. Press the EL button to activate the backlight. 0:32:29.38 0:05:03. 1 1 2 Your new watch has four modes of operation: 1/100th second Memory Stopwatch with Turbo features, a Dual Set-Point Timer, plus two Time-of-Day/ Date/Alarm modes. When the battery is enabled, your watch will come to life in stopwatch mode. Press the ( button to cycle between the modes. S2 – Stop (Display shows “SPLIT”) S2 (2sec) – Reset** 4 S Congratulations on your purchase of an A940MXT stopwatch for the wrist! You’re about to enjoy the convenience of having professional timing right at your fingertips when you need it, plus a regular wristwatch whenever you don’t. SETUP Most watches ship with a battery interrupt in place to save battery life. Turn the watch over and use a quarter or nickle to twist open the battery compartment hatch. Remove clear plastic strip from underneath the battery. Replace the battery, taking care to ensure that the positive (+) terminal is facing up. Replace the battery compartment hatch and tighten with the coin, making sure that the small arrow points to the dot at the top of the watch case when you are finished. Peel the simulated display sticker off the watch face. CUSPLIT EL 940MX TURBO Speed/Rate Function Setting S1(2sec) - Enter Turbo (Speed/Rate) Set Function S1(4sec) – Enter set function and Reset Turbo fields to zero (as for DUAL SPLIT timing) S2 – Select field to be Set (field will flash) S3 – Set field to Desired Setting S4 – Exit Setting Function Memory Review (before Resetting) M – Review* (Bottom shows AVE TOTAL SPEED/RATE, Top shows TOTAL ELAPSED TIME) M – Review* (Bottom shows AVE LAP Split, Top shows TOTAL ELAPSED TIME) M – Review (Shows last SPEED/RATE and LAP Split) M – Review (Shows next SPEED/RATE and LAP Split, in reverse order) *Reviews at any time in reverse numerical order. Hold down for Rapid Review. **Reset before 30 hrs. (end of range) and rollover. ACCUSPLIT, Inc. • 6120 Stoneridge Mall Rd., Suite 210 • Pleasanton, CA 94588 USA 800-965-2008 • 925-226-0888 • FAX 925-463-0147 • www.ACCUSPLIT.com • support@ACCUSPLIT.com 980-301 940MX TURBO M S 3 Time Remaining Timer Set Instructions S1 (2 sec) - Enter set function OR S1 (4sec) - Enter set function & clear the current settings S2 select field to be set (selected field will flash) S3 Set field to desired settings S4 exit setting function Fields to set are Hours, tens of minutes, minutes, tens of seconds, and seconds for First Inteval (Set Point), then same sequence for Second Interval, then repeat. The timer intreprets 0:00:00 as 30:00:00, so set both Set Points to the same value if you want to repeatedly countdown only one interval. Count Down or Count Up Timer Operating Instructions S2 - Start. Top line of display shows which Set Point (1 or 2) you are timing. The middle line shows the Time Interval for the current Set Point. The bottom line of display shows the Time Remaining (count down) for this Set Point. S2 - Stop (Display also shows “STOP”) S2 (2sec) - Reset to beginning At end of the first time Interval, alarm sounds for 5 seconds, and then the watch begins counting down from the second Set Point. The timing cycle repeats (Set Point #1, then Set Point #2, etc.) until manually stopped. REGISTER NOW. Please return your A940MXT registration to the Repair Center address in the warranty, and we will let you know about future products. 4 S 1/ M 3 S L 4 S 1/ S ∞ ∞ EL Indicates Watch in Timeof-Day Mode 2 AOS L 3-30 th 9:25:44 2 STOP CUSPLIT AOS 5 2 0:00: 10 0:00:08.8 Watch is in Countdown Timer Mode AC S Set Point for timer CUSPLIT Month, Date, and Day 2 AC Number of Cycles Completed S Set Point Number (1 or 2) TIME OF DAY MODE The watch keeps track of two complete sets of time/day/date/alarm info (T1 and T2). “T2” shows when the watch is in Time-of-Day mode #2. This is how the display looks in Time-of-Day Mode: S DUAL SET-POINT TIMER The watch has a count-down timer that alarms when time is elapsed. The timer has two set-points, so that you can set alternating intervals for training. This is how the display looks in Timer Mode. T2 EL Time 940MX TURBO Setting the Time of Day, Day-Date, and Alarms Press (repeatedly until you are in T1 or T2, as desired. S1 (2 sec) - Enter Set function S2 - select field to be set (field will flash) S3 - Set field to desired settings Using Time of Day, Day, Date & Alarm Functions S3 - Alternates between Alarm & Day Date Display Any button - Stops alarm sound While in Alarm Display: S2 - Changes Alarm & chime arm status: Each press rotates through Alarm only (display shows ), Hourly chime (display shows +), or Both, then neither. 1 Power Reset: • Push and hold S2 and S3 - Display turns OFF • Release all - Display shows all segments ON then displays stopwatch at 0:00:00.00 Changing the Battery When Low-Battery Indicator is “ON,” replace the unit’s battery with a new Type CR2016 Lithium cell, or equivalent. PERFORMANCE SPECIFICATIONS Stopwatch Performance Function & Features • 50 Dual Distance Split Automatic Email __________________________ User ___________________________ _______________________________ _______________________________ • • • • • • • • • • • • • • Memory Hour, Minute, Second to 1/100 Sec Speed & Rate Computations (Hr & Min) (TURBO) Computers & Recalls Ave Speed/Rate (TURBO) 30 Hour Range Computers & Recalls Average Lap Split Anytime Memory Review Rapid Memory Review FIFS (First In First Saved) Memory LIFO (last in First out) Memory Display True Split Count 1-Button Rapid Split & Reset Action Dual Split Timing Split Counter to 999 with Rollover Return to Running Dual Split Timer Performance Function & Features • Dual Set-Point Timer Interval Memories • Auto Repeat of Dual Interval Timer • Display “1” or “2” for work or Rest part of Cycle • Display Current Cycle Count • 30 Hour Range (0:00:00=30:00:00) • Hours, Minutes, Seconds Setting • Hours, Minutes, Seconds, 1/10 Sec Timing Display Time of Day and Time of Day Alarm Functions and Features • Time Day-Month, Day, Alarm • 2nd Time, Date-Month, Day, Alarm • Hourly Chime General Performance Features • 5 year NO-PROOF OF PURCHASE Warranty • NO-FAIL, Million – Cycle Switches • Bold, Easy-to-Read Digits • 60 degree Comfort Viewing Angle • Water Resistant • Shock Resistant • 32,768Hz Quarts Crystal accuracy to +or- 0.01 sec/hr • 1.5 Year Battery Life • Low-Battery Indicator • Accurate Temp: 5C-35C (41F-95F) • Operating Temp: -10C0-60C (14F-140F) NO-PROOF-OF-PURCHASE LIMITED WARRANTY See label on back of unit for details, or check http://support.ACCUSPLIT.com Assembled in China. © ACCUSPLIT 2006
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1.1-111 About : 98d6b933-bf79-11da-be58-86a54e30e414 Create Date : 2008:05:18 15:10:16-07:00 Metadata Date : 2008:05:18 15:10:20-07:00 Modify Date : 2008:05:18 15:10:20-07:00 Creator Tool : Adobe InDesign CS2 (4.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 2172 bytes, use -b option to extract) Instance ID : uuid:3490fc04-2527-11dd-8c0b-0016cba51988 Document ID : adobe:docid:indd:bbff7c6d-c72b-11da-baac-950787784cca Rendition Class : proof:pdf Derived From Instance ID : bbff7c6c-c72b-11da-baac-950787784cca Derived From Document ID : adobe:docid:indd:98d6b932-bf79-11da-be58-86a54e30e414 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:CADB82A0D05611DAA55CF479877C7633, uuid:CADB82A1D05611DAA55CF479877C7633, uuid:CADB829ED05611DAA55CF479877C7633, uuid:DCF4800CC71011DAAFCFAD1F46F51509, uuid:DCF4800DC71011DAAFCFAD1F46F51509 Manifest Reference Document ID : uuid:2A559BA9C70111DAAFCFAD1F46F51509, uuid:2A559BADC70111DAAFCFAD1F46F51509, uuid:2A559BA9C70111DAAFCFAD1F46F51509, uuid:2A559BA6C70111DAAFCFAD1F46F51509, uuid:DCF48005C71011DAAFCFAD1F46F51509 Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CS2 (4.0.5)EXIF Metadata provided by EXIF.tools