Aceex X-ADSL ADSL User Manual

Download:
Mirror Download [FCC.gov]
Document ID	120795
Application ID	Am/Eb8xEEFG7FNiAXABbyQ==
Document Description	USER MANAUAL 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.11kB (601374 bits)
Date Submitted	2000-10-11 00:00:00
Date Available	2000-11-01 00:00:00
Creation Date	2000-09-21 21:19:58
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	2000-10-12 09:24:03
Document Title	Users Manual
Document Creator	穨全能影像經理 - Inbox
Document Author:	穨ivy

The Modem Icon gtility Wil ‘
connection audiA'EMlAD
tests. ’ ‘ ’
Getting Started , ,
Before proceedingfo
coneclly. Contact
Icon Utility is displayed
screen. As shown below
Using the Modem Iconf ,
The Modern Icon sefies wo purposes.
1.To display the modem status
2. To, allow the user to monitgrnthe ADSL,moclem.,
Modem Status
The Modem Icon consists of two lights side by side. These lights are used to
display the state of the modem. The left light signifies data is being transmitted
whereas the light light signifiesf/vinfonnation is being received. The state of the
modem can be detemiiné‘d'as’ follév'vsi "
Red,Rcd ’ No signal , 4 “I
Black/Yellow or Modern is connecting
-_
_ Modem is disconnected, or a problem ex1sts
Placing the mouse cursor on the Modem Icon will show a summary of the
modems status by displaying the modem's state, upstream line rate and
downstream line rate.
Monitoring the ADSL Modem
ADSL Test Application
Pointing to the Mogem Icon, and clicking on therlveftvmouse button will display
the ADSL Test Application window. From this windows, the user will be
able to run Diagnosticstreview the ADSL modem status and view the ATM/
ADSL Statistics. For a more detailed explanation of each window, turn to the
appropriate section in this manual for each menu.
5-2.
nnn-IHn
_-—_—_
Modem Icon Menu
Pointing to the Modern Icon and clicking on the right mouse button will display
the Modem Icon options window. from this window, the user will be able to:
a. "Disconnect" the modem flour or "Connect" the modem to the centtal ,
office equipment;
b. Run a diagnostic test to test the modem;
c. Monitor the ADSL modem status;
d Monitor various ADSL statistics; s
e. configure the PVC' values for RFC1577 and RFC1483.
Connecting and Disconneéting the ADSL Modem
This option will allow the user to connect to or disconnect from the central office
equipment. If the modem 1s disconnected sitnply choose the connect option and
the ADSL modem will start to connect. To disconnect the modem, simply select
the disconnect option
t-tr
ADSL Status Menu
The ADSL Status menu allows the user to monitor the ADSL connection as
well as monitor the transmit and receive line rates.
5-3
nnn4~n
ADSL State - displays the current status of the modem. These states are:
Connected, Connecting, and Disconnected.
Protocol-The protocol section displays which ADSL standard is being used.
Transmit/ Receive Rate - In the Transmit and Receive section, the user will be
able to see what kind of line rate is being achieved for both upstream and
downstream line rates. '
ADSL Statistics Menu
From this menu, the user will beable to see Error Count Information, ATM
Transmission statistics and ATM Receive statistics.
Error Count Information
RefHSK Count—The number of times handshaking has occurred.
CRC error count-The number of cyclic redundancy check (CRC) eroors
accumulated during showtime. The count will be reset to zero after the next
handshaking. During showtime, the receiver keeps checking the CRC check sum
for each received superframe, If there is a mismatch between the received
check ‘Sum‘ and the locally “calulated cheek sum;— a CRC error has occurred.
a.
ATM HEC A The number of ATM header error check (HEC) errors
accumulated during showtime. The count will be reset to zero after the next
handshaking. After entering showtime, the ATM TC layer at the reciever will
undergo a cell delineation hunting process by finding the header of each
received ATM cell. After successfully finding the cell delineation, the ATM TC
layer will keeps checking the HEC check sum for each received ATM cell. If
there is a mismatch between the received check sum and the locally calculated
check sum, an ATM HEC error has occurred.
5-4
_—_—_'_.—
ATM Transmission Side Statistics — displays the number of packets transmitted.
ATM Receive Side Statistics-displays the number of good and bad packets
received. ”-
Configuration Menu
The Configuration menu will allow the user to cheek or change the ADSL
network modems PVC" values for RFC1577 and RFC1483. To change the PVC
values, simply select one of the RFC protocols, enter the VP1 and VCI values,
and then click on the PVC Setting button. Click Yes when asked to reboot the
system. Click on the Close button to (close the configuration window.
0001?“
Appendix A l A
Specifications
ADSL Modem Card Connectors
The ADSL Modem cards has tWo connectors:
* PCI Connector that connects to ‘an open PCI slot in your PC
* ADSL Connector that uses ”an R141 telephone tip/ring connector
(pin3 is ring, pin 4 is tip)
Data Transfer Rates
ADSL Full Data Rates
' Bit Rate per Constellation Siz {lib/s)
Symbol -
Rate 256 256 32
(kbauds uncorl -
13 wk)
RS 1088 952 816 680
136 Wth
RS 1024 895 768
Table 1: Downstream Channel Bit Rate per Constellation Size (kb/s)
Bit Rate per Constellation ' (kb/s)
Symbol
l-lnnn
(kbauds nncoded ’
“um—“—
E__-----
* Future availability with 680 and 952 kbauds downstream symbol rates
** only available for 136 kbauds downstream ‘ ' ~
Table 2: Upstream Channel Bit Rate per Constellation Size (kb/s)
A-l
nnn1 $20
ANSI T1413 Data Rates
Data rates for DMT mode are partitioned at 32 kb/s increments; for both the
upstream apddownstreanihdatavrates adhefinng-flfi‘? T1413 Issue 2 Standard.
The downstream data rate's'eiitend fr‘oxfl‘ 32ka/s' t018.192Mh/s. "The upStfe’ain
data rates ‘éfitend from 32 kaS to 640 kb/s.
Bit Rate (kbls)
Table 3: ANSI T1.413 Payload Bit Rates
G.992.2 Data Rates . ~ »
Data rates foer'f99‘2‘2' médeiéieiljkicwride“pgrfitidn'd ai’tf321éb/s’ increments} The
downstream data rates extend from ‘64'kb/s to' 1.536 Mb/s: The upstream’data
rates extend from 32 kb/Sx to 512 kb/s.
Table 4: 0.99312 Payload Bit Rates
Power Consumptionfiwithout use of a33V kegulator)
Software Requirements
Proceésor
Intel—cdmpatible Pentium or higher ’
Operating System
* Microsoft Windows NT4.0
* Microsoft Windows 95/98
Part No.: 506-10084—00
A-2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : .穨.全能影像經理 - Inbox
Create Date                     : 2000:09:21 21:19:58
Title                           : .穨.未命名標題
Author                          : .穨.ivy
Producer                        : Acrobat PDFWriter 4.0 for Windows
Modify Date                     : 2000:10:12 09:24:03+08:00
Page Count                      : 7

EXIF Metadata provided by EXIF.tools