Acer orporated A510 Tablet Computer User Manual PE A510 P S Information ENG PA
Acer Incorporated Tablet Computer PE A510 P S Information ENG PA
Contents
- 1. Users Manual 1 of 2
- 2. Users Manual 2 of 2
Users Manual 2 of 2
English
Model number:
Serial number:
Date of purchase:
Place of purchase:
© 2012. All Rights Reserved.
Acer ICONIA TAB - Product and Safety Information
Model: A510
Original Issue: 01/2012
Product information
For detailed product information, please go to www.acer.com/.
For service and support information, or to download the User’s Manual, drivers
and applications, please follow the instructions below:
I. Go to www.acer.com and select your region and country.
II. Click Driver and Download > Select Product Family > Tablet.
III. Select your tablet series and model.
1
English
Product registration
When using your product for the first time, it is recommended that you
immediately register it. This will give you access to useful benefits, such as:
• Faster service from our trained representatives.
• Membership in the Acer community: receive promotions and participate in
customer surveys.
• The latest news from Acer.
Hurry and register, as other advantages await you!
How to register
To register your Acer product, please visit www.acer.com. Click Registration
and follow the simple instructions.
You can also register directly from your tablet by tapping the Registration icon.
After we receive your product registration, you will be sent a confirmation email
with important data that you should keep in a safe place.
Connecting a Bluetooth device
A2DP stereo headsets are supported for playback only. Please check for updates
to the tablet's software which may add support for additional Bluetooth devices.
To connect to a bluetooth device, tap (Apps) then Settings. Under Wireless &
networks make sure Bluetooth is ON then select a device.
Ta p SEARCH FOR DEVICES to scan for available devices.
Note: Please check for updates to the tablet's software that may add support for
additional Bluetooth devices.
Resetting the device
You may have to perform a reset if your device fails to respond when buttons are
pressed or the screen is tapped.
If your device is not responding to screen input
To reset your device use a small thin object (such as a paperclip) to press the
recessed reset button.
2
English
Restoring to factory settings
Open Settings from the application menu, then tap Backup & reset > Factory
data reset; tap Reset tablet and then Erase everything to format your tablet.
Updating your tablet’s operating system
To check for updates, tap Apps > Settings > About tablet > System update >
Check now.
3
English
Specifications
Performance
• NVIDIA® Tegra™ 3 mobile processor
• Quad Core ARM® Cortex™-A9
•System memory:
• 1 GB of RAM
• 16 or 32 GB of flash memory
• Google Android™ operating system
Display
• 10.1” WXGA TFT-LCD capacitive multi-touch screen
• 1280 x 800 resolution
• 262K colors support
Multimedia
•Micro (Type D) HDMI output
• CD-quality stereo output
• Stereo speakers
• Built-in microphone
USB connector
• Micro USB connector
Power
• DC power-in (12 V, 1.5 A)
Connectivity
• Bluetooth 2.1+EDR & A2DP support
• Wi-Fi IEEE 802.11b/g/n
•GPS
Camera
•Front camera
• 1-megapixel
•Fixed focus
4
English
• Rear camera
• 5-megapixel
• Auto focus
Expansion
• microSD memory card (up to 32 GB)
Battery
• Rechargeable high density Li-polymer batteries: 9800 mAh (36.26 Wh)
Note: Length of battery operation will depend on power consumption which is based on
system resource use. For example, constantly using the backlight or using power-
demanding applications will shorten battery life between charges.
Dimensions
Height 175 mm
Width 260 mm
Thickness 10.95 mm
5
English
FCC regulations
This mobile device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This mobile device has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. However, there is no guarantee that interference will not occur in a
particular installation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
If this equipment does cause interference to radio and television encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the euipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF exposure warning
The equipment complies with FCC RF exposure limits set forth for an
uncontrolled environment.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter
FCC RF exposure information (SAR)
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
6
English
The exposure standard for wireless devices employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6 W/kg.
Although the SAR is determined at the highest certified power level, the actual
SAR level of the device while operating can be well below the maximum value.
While there may be differences between the SAR levels of various devices and at
various positions, they all meet the government requirements.
The FCC has granted an Equipment Authorization for this model device with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model device is on file with the FCC and can
be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid after
searching on the FCC ID for your device, which can be found on the back of the
device.
Canada regulatory compliance
This device complies with Industry Canada licence-exempt RSS standard(s).
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
This Category II radiocommunication device complies with Industry Canada
Standard RSS-310.
Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310
d’Industrie Canada.
Important note
7
English
Note: The country code selection feature is disabled for products marketed in
the US/Canada.
Battery warning statement
• Do not disassemble or open, crush, bend or deform, puncture, or shred.
• Do not modify or remanufacture, attempt to insert foreign objects into the
battery, immerse or expose to water or other liquids, or expose to
excessive heat, fire, or otherhazard. Only use the battery in the system
for which it was specified.
• Only use the battery with a charging system that has been qualified with
the system per this standard.
• Use of an unqualified battery or charger may present a risk of fire,
explosion, leakage,or other hazard.
• Do not short-circuit a battery or allow metallic or conductive objects to
contact the battery terminals.
• Replace the battery only with another battery that has been qualified
with the system per this standard.
• Use of an unqualified battery may present a risk of fire, explosion,
leakage, or other hazard.
• Promptly dispose of used batteries in accordance with local regulations.
• Battery usage by children should be supervised.
• Avoid dropping the host or battery. If the host or battery is dropped,
especially on a hard surface, and the end user suspects damage, take it
to a service center for inspection.
• Improper battery use may result in a fire, explosion, leakage, or other
hazard.
• Storage and operating conditions, including temperature, shall be
specified.
8
English
Prevention of hearing loss
Caution: Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged periods of time.
À pleine puissance, l’écoute prolongée du baladeur peut endommager
l’oreille de l’utilisateur.
CAUTION when listening
To protect your hearing, follow these instructions.
• Increase the volume gradually until you can hear clearly and comfortably.
• Do not increase the volume level after your ears have adjusted.
• Do not listen to music at high volumes for extended periods.
• Do not increase the volume to block out noisy surroundings.
• Decrease the volume if you can’t hear people speaking near you.
R&TTE Certificate Information (SAR)
The unit of measurement for the European Council's recommended limit for
mobile devices is the "Specific Absorption Rate" (SAR). This SAR limit is 2.0 W/
kg, averaged over 10 g of body tissue. It meets the requirements of the
International Commission on Non-Ionizing Radiation Protection (ICNIRP). The
maximum SAR value is calculated at the highest output level in all frequency
bands of the mobile device.
For body worn operation, this device has been tested and meets the ICNIRP
exposure guidelines and was included in the European Standard EN 62311 and
EN 62209-2 for use with accessories that contain no metal and that position the
device a minimum of 1.5 cm from the body. Use of other accessories may not
ensure compliance with ICNIRP exposure guidelines.
9
English
During use, the actual SAR level is usually much lower than the maximum value,
because the mobile device works in different output levels. It only transmits with
as much output as is required to reach the network.
Certification marks and Compliance
You can view general safety information on your device: open Apps > Settings >
About tablet > Safety information.
You can view certification logos on your device: open Apps > Settings > About
tablet > Legal information > Certification Logo.