Acer orporated C01 Smart Camera User Manual Holo360 Nano Safety Guide EN v1

Acer Incorporated Smart Camera Holo360 Nano Safety Guide EN v1

User manual

Regulatory Information andSafety Guide
2 - © 2017. All Rights Reserved.Regulatory Information and Safety GuideThis revision: 08/2017
Table of contents - 3TABLE OF CONTENTSTips and information for comfortable use 4Taking care of your vision ........................... 4Protecting your hearing............................... 5Basic care and tips for using your device 6Taking care of your device.......................... 6General ....................................................... 6Safety instructions ................................... 7Product servicing ........................................ 7Cleaning and servicing................................ 8Battery and adapter information .............. 8Accessing the power................................... 8Disconnecting the power source................. 8Using electrical power................................. 8Guidelines for safe battery usage ............. 10Internal battery....................................... 12Emergency calls........................................ 12Medical devices ..................................... 13Vehicles ................................................. 13Potentially explosive environments........ 14Disposal instructions.............................. 15Wireless adapter regulatory information 15Radio frequency interference.................... 15Use on aircraft........................................... 16The wireless adapter and your health....... 16USA — FCC and FAA............................... 16FCC radio frequency interference requirements ............................................. 17RF exposure ............................................. 19Canada — Industry Canada (IC) .............. 19European Union........................................ 21Compliant with Russian regulatory certification................................................ 24
4 - Tips and information for comfortable useTIPS AND INFORMATION FOR COMFORTABLE USETaking care of your visionLong viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain.Eyes• Rest your eyes frequently.• Give your eyes regular breaks by looking away from the monitor and focusing on a distant point.• Blink frequently to keep your eyes from drying out.Display• Keep your display clean.• Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle of the display.• Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity.• Eliminate glare and reflections by:• placing your display in such a way that the side faces the window or any light source,• minimizing room light by using drapes, shades or blinds,• using a task light,• changing the display's viewing angle,• using a glare-reduction filter,• using a display visor, such as a piece of cardboard extended from the display's top front edge.• Avoid adjusting your display to an awkward viewing angle.• Avoid looking at bright light sources for extended periods of time.
Tips and information for comfortable use - 5Protecting your hearingTo protect your hearing, follow these instructions.• Increase the volume gradually until you can hear clearly and comfortably.• Do not increase the volume level after your ears have adjusted.• Do not listen to music at high volumes for extended periods.• Do not increase the volume to block out noisy surroundings.• Decrease the volume if you can't hear people speaking near you.WarningPermanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time.
6 - Basic care and tips for using your deviceBASIC CARE AND TIPS FOR USING YOUR DEVICERead these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.Taking care of your deviceYour device will serve you well if you take care of it.• Do not expose the device to direct sunlight. Do not place it near sources of heat, such as a radiator.• Do not subject the device to magnetic fields.• Do not expose the device to rain or moisture.• Do not spill water or any liquid on the device.• Do not drop, bump, scratches, twist, hit, shake push, or place heavy objects on your device, display, or external devices.• Do not subject the device to heavy shock or vibration.• Do not expose the device to dust or dirt.• Never place objects on top of the device.• Do not slam the device display when you close it.• Never place the device on uneven surfaces.• Where possible, keep all objects at least 15 cm away from the device to avoid causing device damage.General• Do not use this product near water.• Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.• Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
Basic care and tips for using your device - 7• To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.• Never use it under sporting, exercising, or any vibrating environment which will probably cause a short-circuit and result the exposure risk from the lithium battery pack.• The AC adapter may get hot. To avoid injury, ensure they do not come in contact with your skin or body.• Your device and its enhancements may contain small parts. Keep them out of the reach of small children.• The surface temperature of the base will rise during normal operation, particularly when plugged in to AC power. Allowing sustained contact with exposed skin can cause discomfort or burns.Safety instructionsProduct servicingDo not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.Unplug this product from the wall outlet and refer servicing to qualified service personnel when:• The power cord or plug is damaged, cut or frayed.• Liquid was spilled into the product.• The product was exposed to rain or water.• The product has been dropped or the case has been damaged.• The product exhibits a distinct change in performance, indicating a need for service.• The product does not operate normally after following the operating instructions.• The product exhibits a distinct change in performance, indicating a need for service.• The product does not operate normally after following the operating instructions.
8 - Basic care and tips for using your deviceCleaning and servicingWhen cleaning the device, follow these steps:1. Turn off the device and remove the battery pack if applicable.2. Disconnect the AC adapter.3. Use a soft, moist cloth. Do not use liquid or aerosol cleaners.Battery and adapter informationAccessing the powerBe sure that the power outlet you plug into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug from the electrical outlet.Disconnecting the power sourceObserve the following guidelines when connecting and disconnecting power to the power supply unit:Install the power supply unit before connecting to the AC power outlet.Unplug before removing the power supply unit from the device.If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies.Using electrical power• Do not connect the adapter to any other device.• When unplugging the power cord, do not pull on the cord itself but pull on the plug.NoteAdjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.
Basic care and tips for using your device - 9• This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.• Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.• If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.• Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.• If this product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.• The system can be powered using a wide range of voltages; 100 to 120 or 220 to 240 V or 100-240 V AC. The power cord included with the system meets the requirements for use in the country/region where the system was purchased. Power cords for use in other countries/regions must meet the requirements for that country/region. For more information on power cord requirements, contact an authorized reseller or service provider.WarningThe grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.NoteThe grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.
10 - Basic care and tips for using your deviceGuidelines for safe battery usagePrecautions when charging batteriesThe useful lifespan of a battery is adversely affected by the following behavior:• Constantly charging the battery/device when already at full capacity.• Charging the battery/device at temperatures above 35 °C (95 °F) or below 0 °C (32 °F).To prevent damage, follow these precautions:• Stop charging the battery once it reaches 100% capacity; regularly or frequently charging a fully charged battery for an extended period of time may cause battery deformation or damage. We recommend that you recharge the device when the battery level drops below 70% capacity.• Do not charge battery in temperatures above 35 °C (95 °F) or below 0 °C (32 °F). Charging in abnormally high or abnormally low temperatures can cause battery deformation or damage.• The charging port must be clean and free from debris and should only be used with Acer charging equipment. Use of a non-Acer battery or charging equipment can cause damage to the product and will void the warranty.• If you plan to store the device for a long period of time, turn-off the device, remove AC power and store the product at room temperature (0 °C - 35 °C) in a dry (humidity: 45% - 80%), well-ventilated area. Avoid direct sunlight, high temperatures and high humidity. Do not leave your device’s battery completely discharged for a long period of time; this may cause battery deformation or damage. We recommend that the battery is checked and charged to approximately 50% capacity every 6 months.WarningWhen using a charging cart or a small space to simultaneously charge or operate multiple devices , the area must be well- ventilated and the temperature kept between 0 °C (32 °F) to 35 °C (95 °F) and battery charging must be stopped when 100% capacity is reached. Continuous charging can cause deformation or damage to the battery/device.
Basic care and tips for using your device - 11• ONLY CHARGE THE BATTERY IN A CLEAN, WELL VENTILATED AREA.Precautions when replacing the batteryImproper replacement or mishandling could damage the battery, cause overheating, result in injury, and risk fire or explosion. • Device with built-in battery: A built-in battery must be replaced by an authorized service center. Do not attempt to replace or remove the battery by yourself.• Device with removable battery: The battery should only be replaced with parts approved by Acer. Do not replace the battery with any parts other than approved ones.This device uses a Lithium-based battery. Do not use it in a humid, wet or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 50 °C (122 °F).Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will must not occur at temperatures below 0 °C (32 °F) or above 35 °C (95 °F).The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the operation time becomes noticeably shorter than normal, check an authorized reseller to purchase a new battery.WarningBatteries may explode if not handled properly. Do not disassemble or dispose of batteries in fire. Do not short external contacts, crush, puncture or otherwise tamper with batteries. Keep batteries away from children. Follow local regulations when disposing of used batteries.
12 - Basic care and tips for using your deviceUse the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.The capacity and lifetime of the battery will be reduced if the battery is left in hot or cold places, such as in a closed car in summer or winter. Always try to keep the battery between 15° C and 25° C (59° F and 77° F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is especially limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.Wireless devices may be susceptible to interference from the battery, which could affect performance.Internal battery• Do not attempt to replace a built-in rechargeable battery, battery replacement must be done by an Acer- authorized repair facility.• Recharge the battery by following the instruction included in the product documentation.Emergency callsNotePlease refer to www.acer.com for battery shipping documents.WarningYou cannot make emergency calls through this device. To make an emergency call you shall dial out through your mobile phone or other telephone call system.
Basic care and tips for using your device - 13Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF transmissions.Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between wireless devices and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following:• Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker• Not carry the device near your pacemaker when the device is switched on. If you suspect interference, switch off your device, and move it.Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (anti-lock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles
14 - Basic care and tips for using your deviceequipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless devices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations.Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.WarningDo not operate a portable transmitter (including this wireless adapter) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to be qualified for such use.
Basic care and tips for using your device - 15Disposal instructionsDo not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit www.acer-group.com/public/SustainabilityWireless adapter regulatory informationRadio frequency interferenceRemember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used normally. To successfully transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with hearing aids should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.WarningFor safety reasons, turn off all wireless or radio transmitting devices when using your laptop under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or cellular.
16 - Basic care and tips for using your deviceUse on aircraftThe wireless adapter and your healthThe wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:• Using the wireless adapter on board airplanes, or• Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful.If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on.USA — FCC and FAAThe FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure limits found in OET Bulletin 65, WarningFCC and FAA regulations may prohibit airborne operation of radio-frequency wireless devices (wireless adapters) because their signals could interfere with critical aircraft instruments. Ask the cabin crew before turning on your device’s wireless adapter whilst on board.
Basic care and tips for using your device - 17supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC’s recommended limits.• The following safety precautions should be observed: Do not touch or move antenna while the unit is transmitting or receiving.• Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting.• Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio.• The use of wireless adapters in hazardous locations is limited by the constraints posed by the safety directors of such environments.• The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA).• The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital.FCC radio frequency interference requirementsThis device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz and 5.470 to 5.725 GHz frequency ranges. FCC requires this product to be used indoors for the frequency ranges 5.15 to 5.25 GHz and 5.470 to 5.725 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device. No configuration controls are provided for this wireless adapter allowing any change in the frequency of operations outside the FCC grant of authorization for U.S operation according to Part 15.407 of the FCC rules.NoteApplies to device supporting IEEE 802.11a/ac wireless adapters.
18 - Basic care and tips for using your deviceUSA — Federal Communications Commission (FCC)This device complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two conditions:• This device may not cause harmful interference.• This device must accept any interference that may cause undesired operation.• 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.Interference statementThis wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures:• Reorient or relocate the receiving antenna of the equipment experiencing the interference.• Increase the distance between the wireless adapter and the equipment experiencing the interference.• Connect the device with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected.• Consult the dealer or an experienced radio/TV technician for help.
Basic care and tips for using your device - 19RF exposureFCC RF Radiation Exposure Statement:1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance which states in DoC between the radiator and your body.Canada — Industry Canada (IC)This device complies with RSS247 of Industry Canada. Cet appareil se conforme à RSS247 de Canada d'Industrie.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.CAN ICES-3(B)/NMB-3(B)Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.CAN ICES-3(B)/NMB-3(B)Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
20 - Basic care and tips for using your deviceradioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.La bande 5 150-5 250 MHz est réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.Users are advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.Les utilisateurs êtes avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.IC RF Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance which states in DoC between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 0.5 cm de distance entre la source de rayonnement et votre corps.
Basic care and tips for using your device - 21European UnionList of applicable countriesThis product must be used in strict accordance with the regulations and constraints in the country of use. For further information, contact the local office in the country of use. Please see https://europa.eu/european-union/about-eu/countries_en for the latest country list.Specific absorption rate information This device meets the EU requirements on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The limits are part of extensive recommendations for the protection of the general public. These recommendations have been developed and checked by independent scientific organizations through regular and thorough evaluations of scientific studies. The unit of measurement for the European Council's recommended limit for mobile devices is the "Specific Absorption Rate" (SAR), and the SAR limit is 2.0 W/kg averaged over 10 grams of body tissue. It meets the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP). For body worn operation, this device has been tested and meets the ICNIRP exposure guidelines and the European Standard, for use with dedicated accessories. Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines. The low band 5.15 to 5.35 GHz is for indoor use only. This equipment complies with the essential requirements of the European Union directive 2014/53/EU. See Statements of European Union Compliance, and more details refer to the attached Declaration of Conformity.
22 - Basic care and tips for using your deviceItalyThe use of this equipment is regulated by:1. D.L.gs 1.8.2003, n. 259, article 104 (activity subject to general authorization) for outdoor use and article 105 (free use) for indoor use, in both cases for private use. 2. D.M. 28.5.03, for supply to public of RLAN access to networks and telecom services. L’uso degli apparati è regolamentato da:1. D.L.gs 1.8.2003, n. 259, articoli 104 (attività soggette ad autorizzazione generale) se utilizzati al di fuori del proprio fondo e 105 (libero uso) se utilizzati entro il proprio fondo, in entrambi i casi per uso private. 2. D.M. 28.5.03, per la fornitura al pubblico dell’accesso R-LAN alle reti e ai servizi di telecomunicazioni. BelgiumDans le cas d'une utilisation privée, à l'extérieur d'un bâtiment, au-dessus d'un espace public, aucun enregistrement n'est nécessaire pour une distance de moins de 300 m. Pour une distance supérieure à 300 m un enregistrement auprès de l'IBPT est requise. Pour les enregistrements et licences, veuillez contacter l'IBPT.In geval van privé-gebruik, buiten een gebouw, op een openbare plaats, is geen registratie nodig, wanneer de afstand minder dan 300 m is. Voor een afstand groter dan 300 m is een registratie bij BIPT vereist. Voor registraties en licenties, gelieve BIPT te contacteren.Brazil Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. PakistanPakistan Telecommunication Authority (PTA) Approved.
Basic care and tips for using your device - 23MoroccoThe operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities: Agadir, Assa-Zag, Cabo Negro, Chaouen, Goulmima, Oujda, Tan Tan, Taourirt, Taroudant and Taza. The operation of this product in the radio channels 4, 5, 6 and 7 (2425 - 2442 MHz) is not authorized in the following cities: Aéroport Mohamed V, Agadir, Aguelmous, Anza, Benslimane, Béni Hafida, Cabo Negro, Casablanca, Fès, Lakbab, Marrakech, Merchich, Mohammédia, Rabat, Salé, Tanger, Tan Tan, Taounate, Tit Mellil, Zag.Japan5 GHz 帯は室内でのみ使用のことKorea당해 무선설비는 운용 중 전파혼신 가능성이 있음Taiwan保護您的視力長時間的觀看、配戴不正確的眼鏡或隱形眼鏡、炫光、過度強烈的室內照明、焦點失常的螢幕、過小的字體與低對比的顯示都可能照成您雙眼的疲勞。以下所列提供您有關減少眼睛疲勞的建議。雙眼保養• 時常讓您的雙眼休息。• 將目光移開螢幕，並集中在遠處的一個點，可讓您的眼睛得到短暫的休息。• 時常眨眼睛以避免眼睛乾澀。• 使用過度恐傷視力。• 使用 30 分鐘請休息 10 分鐘。• 未滿 2 歲幼兒不看螢幕，2 歲以上每天看螢幕不超過 1 小時。低功率電波輻射電機管理宣告第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或 使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
24 - Basic care and tips for using your device第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經 發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。無線資訊傳輸設備必須具備安全功能，以保護未經授權之一方任意更改軟體進而避免發射機操作於非經認證之頻率、輸出功率、調變形式或其他射頻參數設定。無線資訊傳輸設備高增益指向性天線只得應用於固定式點對點系統。減少電磁波影響，請妥適使用。為維護隱私權，請妥適使用。台灣電池聲明警告：本電池如果更換不正確會有爆炸的危險，請依製造商說明書處理用過之電池。Modifications to the productAcer cannot be held responsible for unauthorized modifications made by the user and the consequences thereof, which may alter the conformity of the product.Compliant with Russian regulatory certification⻉曢㱇媲⛅㔝
Acer America Corporation333 West San Carlos St., Suite 1500San Jose, CA 95110, U. S. A.Tel : 254-298-4000Fax : 254-298-4147www.acer.comFederal Communications Commission Declaration of ConformityThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The following local Manufacturer/Importer is responsible for this declaration:Product: Smart CameraTrade Name: acerModel Number: C01 Name of Responsible Party: Acer America CorporationAddress of Responsible Party: 333 West San Carlos St., Suite 1500 San Jose, CA 95110, U. S. A.Contact Person: Acer RepresentativePhone No.: 1-254-298-4000Fax No.: 1-254-298-4147June 21, 2017RF exposure – SAR Information: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be operated with a minimum distance of 0.5 cm between the radiator and your body.The highest SAR value of this device is 1.20 _____ W/kg.The User’s Manual contains important regulatory information for your health and safety. You can download it from the Acer support website by going to http://go.acer.com/?id=17883*HC.71111.0CM*HC.71111.0CM
Acer America Corporation333 West San Carlos St., Suite 1500San Jose, CA 95110, U. S. A.Tél : 254-298-4000Téléc. : 254-298-4147www.acer.comDéclaration de conformité de la Federal Communications CommissionCet appareil est conforme à l’article 15 des Réglementations de la FCC. Le fonctionnement est subordonné aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d’interférences nuisibles, et (2) cet appareil doit accepter toute interférence reçue, y compris des interférences qui peuvent provoquer un fonctionnement non désiré.Le fabricant/importateur local suivant est responsable de cette déclaration :Produit : Appareil photo intelligentNom commercial : acerNuméro de modèle : C01 Nom de la partie responsable : Acer America CorporationAdresse de la partie responsable : 333 West San Carlos St., Suite 1500 San Jose, CA 95110, U. S. A.Personne contact : Représentant AcerNo. de téléphone : 1-254-298-4000No. de fax : 1-254-298-414721 juin 2017Exposition RF – Informations DAS: Cet équipement est conforme aux limites FCC d’exposition aux radiations RF définies pour un environnement non contrôlé. Cet équipement doit être utilisé à une distance minimale de 0,5 cm entre le radiateur et votre corps.La valeur DAS la plus élevée de cet appareil est 1.20_____ W/kg.Le Manuel d’utilisation contient des informations réglementaires importantes concernant votre santé et la sécurité. Vous pouvez le télécharger depuis le site Web d’assistance Acer en allant à http://go.acer.com/?id=17883Acer America Corporation333 West San Carlos St., Suite 1500San Jose, CA 95110, U. S. A.Tel: 254-298-4000Fax: 254-298-4147www.acer.comComisión Federal de Comunicaciones Declaración de conformidadEste dispositivo cumple con la Parte 15 de las reglamentaciones de la FCC. El funcionamiento está sujeto a las siguientes dos condiciones: (1) este dispositivo no puede causar interferencia perjudicial, y (2) este dispositivo debe aceptar cualquier interferencia, incluso la interferencia que pueda causar un funcionamiento no deseado.El siguiente Fabricante/Importador es responsable de esta declaración:Producto: Cámara inteligenteMarca comercial: acerNúmero de modelo: C01 Nombre de la parte responsable: Acer America CorporationDirección de la parte responsable:333 West San Carlos St., Suite 1500 San Jose, CA 95110, U. S. A.Persona de contacto: Representante de AcerNúmero de teléfono: 1-254-298-4000Número de fax: 1-254-298-414721 de junio de 2017Exposición a RF – Información de SAR: Este equipo cumple con los límites de exposición a la radiación de RF de la FCC establecidos para un ambiente no controlado. Este equipo debe ser operado con una distancia mínima de 0,5 cm. entre el radiador y su cuerpo.El valor de SAR más alto de este dispositivo es de 1.20 _____ W/kg.El Manual del usuario contiene información reglamentaria importante para su salud y seguridad. Puede descargarlo desde el sitio web de soporte de Acer al visitar http://go.acer.com/?id=17883

Navigation menu