Acer orporated QBT1 BT module User Manual Manual

Acer Incorporated BT module Manual

Contents

Manual

Download: Acer orporated QBT1 BT module User Manual Manual
Mirror Download [FCC.gov]Acer orporated QBT1 BT module User Manual Manual
Document ID2649888
Application ID1/Qp75Jx4uqhHSo+lOKuWA==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize310.29kB (3878634 bits)
Date Submitted2015-06-16 00:00:00
Date Available2015-12-14 00:00:00
Creation Date2015-04-01 08:53:21
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2015-05-25 18:06:57
Document TitleManual
Document CreatorFrameMaker 7.2

Acer Projector
X1185/X1185N/X1285/X1285N/
S1285/P1185/P1285/P1385W/
X1385WH/H6518BD/
E341D/HE-813J/H1P1418
Series User's Guide
Copyright © 2015. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 01/2015
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Acer Projector
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
"HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC."
iii
Information for Your Safety and
Comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
•
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
iv
•
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices or lamp.
Using electrical power
•
•
•
•
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.5 meters (14.76 feet) maximum length.
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
•
•
Do not look into the projector's lens when the lamp is on. The bright light
may hurt your eyes.
Turn on the projector first and then signal sources.
Do not place the product in the following environments:
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector are necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shorten the life span and darken the image.
Locations near fire alarms.
•
•
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
•
•
•
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
vi
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, please ensure the projector completes
its cooling cycle before disconnecting power.
Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to stop
before turning main power off.
Do not touch the air outlet grille and bottom plate which become hot.
Clean the air filter frequently. The temperature inside may rise and cause
damage when the filter/ventilation slots are clogged with dirt or dust.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the remote control.
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Contact your local dealer or Acer service center when you need to change
the lamp.
The product will detect the life of the lamp itself. Please contact your local
dealer or Acer service center for changing the lamp, when lamp warning
message displays.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you.
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
vii
Caution for Listening
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit http://www.acer-group.com/public/
Sustainability/index.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
"Lamp(s) contain Mercury,
Dispose Properly."
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal
information, check www.lamprecycle.org
viii
First Thing First
Usage Notes
Do:
•
Turn off the product before cleaning.
•
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
Block the slots and openings on the projector provided for ventilation.
•
Use abrasive cleaners, waxes or solvents to clean the unit.
•
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place in direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
•
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
•
Turn on the projector first and then the signal sources.
The product will detect the life of the lamp itself. Please contact your local dealer or
Acer service center for changing the lamp, when lamp warning message displays.
Do not use lens cap when projector is in operation.
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, contact your local dealer or Acer
service center.
First Thing First
iii
viii
Usage Notes
viii
Precautions
viii
Introduction
Product Features
Package Overview
Projector Overview
Projector Outlook
Control Panel
Remote Control Layout
MHL Feature Introduction
Getting Started
Connecting the Projector
Turning the Projector On/Off
13
Turning On the Projector
13
Turning Off the Projector
14
Adjusting the Projected Image
15
Adjusting the Height of the Projected Image
15
How to Optimize Image Size and Distance
16
How to Get a Preferred Image Size by Adjusting
Distance and Zoom
21
User Controls
Installation Menu
26
26
Onscreen Display (OSD) Menus
27
Color
28
Image
31
Setting
33
Management
37
Audio
37
3D
38
Language
39
Appendices
40
Contents
Information for Your Safety and Comfort
Troubleshooting
40
LED & Alarm Definition Listing
44
Using the inner connector(s)
45
Ceiling Mount Installation
46
Specifications
49
Compatibility Modes
53
Regulations and safety notices
57
1
Product Features
This product is a single-chip DLP® projector, including the following
outstanding features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DLP® technology
X1185/X1185N/P1185: Native 800 x 600 SVGA resolution, Auto/4:3/16:9
aspect ratio supported
X1285/X1285N/S1285/P1285: Native 1024 x 768 XGA resolution, Auto/4:3/
16:9 aspect ratio supported
P1385W/X1385WH: Native 1280 x 800 WXGA resolution, Auto/Full/4:3/16:9/
L.Box aspect ratio supported
H6518BD/E341D/HE-813J/H1P1418:
Native 1920 x 1080 1080p resolution, Auto/Full/4:3/16:9/L.Box
aspect ratio supported
Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D
supported (P1185/P1285/P1385W/X1385WH/H6518BD)
One-touch "3D" button on remote control allows quick and easy access to
the 3D functions
Acer ColorBoost technology delivers vivid, life-like images
High brightness and contrast ratio
Versatile display modes enable optimum performance in any situation
NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported
Lower power consumption and economy (ECO) mode extends lamp life
Dynamic Black / ExtremeEco functions help decrease lamp power
consumption and further extend lamp life.
- Dynamic Black: If turned on, the projector dynamically adjusts the power
consumption of the lamp according to the brightness of the image being
projected. When projecting darker images the power consumption will
be reduced and the contrast of the image will also be enhanced.
- ExtremeEco: The projector will decrease the power consumption of the
lamp by up to 70% when no input signal can be detected for 5 minutes.
Acer EcoProjection Technology delivers Intelligent power management
approach and physical efficiency improvement
Advanced keystone correction delivers optimum presentations
Multi-language Onscreen Display (OSD) menus
Manual focus/zoom projection lens
2X digital zoom and pan move function
Microsoft® Windows® 2000, XP, 7, 8, 8.1, Vista®, Macintosh OS, Chrome OS
compliant
CEC (Consumer Electronics Control) function supported
(H6518BD/E341D/HE-813J/H1P1418)
•
•
LumiSense+ supported (H6518BD/E341D/HE-813J/H1P1418)
TCO certified (P1285/X1285/P1385W/X1385WH)
English
Introduction
English
Package Overview
This projector comes with all the items shown below. Check to make sure you
have them all. Contact your dealer immediately if any thing is missing.
X1185/X1185N/X1285/X1285N/
P1185/X1385WH
S1285
P1285/P1385W/H6518BD
Projector
Power cord
VGA cable
Security card
User’s guide (CD-ROM)
Remote control
Quick start guide
Battery x 2
Carrying case
(Optional)
Dust filter
(Optional)
WirelessHD dongle kit
(MWIHD1)
(Optional)
3
English
Projector Overview
Projector Outlook
Front/upper side
S1285
X1185/X1185N/X1285/X1285N/
P1185/X1385WH
P1285/P1385W/H6518BD
Description
Description
Control panel
HDMI (MHL) connector
Micro USB cable
Power key and Power indicator LED 5
Projection lens
Zoom ring and Focus ring
Focus ring
Remote control receiver
Lens cap
Rear side
1 2 4
S-VIDEO
VGA IN -2
VGA IN -1
VGA-OUT
RS232
2 34
S-VIDEO
HDMI / MHL
DC 5V OUT
AUDIO IN -1
AUDIO IN -1
VGA IN -2
VGA IN -1
VGA-OUT
RS232
USB
MINI-B
USB
MINI-B
AUDIO IN -2
AUDIO IN -2
AUDIO OUT
AUDIO OUT
VIDEO
VIDEO
X1185/X1185N/X1285/X1285N/S1285
2 34 5
S-VIDEO
HDMI / MHL
DC 5V OUT
VGA IN -1
VGA-OUT
P1185/P1285/P1385W/X1385WH
S-VIDEO
RS232
AUDIO IN -1
AUDIO IN -1
VGA IN -2
VGA IN -1
VGA-OUT
RS232
AUDIO IN -2
AUDIO IN -2
AUDIO OUT
AUDIO OUT
USB
MINI-B
USB
MINI-B
VIDEO
VIDEO
H6518BD
10 11
Description
12
Description
Audio input connector
Audio output connector
Analog RGB signal/HDTV/
component video input connector
S-Video input connector
Composite video input connector
Monitor loop-through output
connector
DC 5V output
RS232 connector
Mini USB connector
10 Kensington™ lock port
HDMI (MHL) connector
11 Power socket
Component video input connector
12 Tilt adjusting wheel
English
Control Panel
10
Function
Description
LAMP
Lamp Indicator LED.
POWER indicator Refer to the "Turning the Projector On/Off" section.
LED
Keystone
Adjusts image distortion caused by tilting projection
(±40 degrees).
Power key
Refer to the "Turning the Projector On/Off" section.
MENU
Launches the Onscreen Display (OSD) menu, returns to
the previous step for the OSD menu operation or exits
the OSD menu.
MODE
Chooses a display mode.
TEMP
Temp Indicator LED.
SOURCE
Chooses RGB, component video, S-Video, composite
video, HDMI (MHL) or HDTV source.
Four directional
selection keys
Selects items or makes adjustments to your selection
10 RESYNC
Automatically synchronizes the projector to the input
source.
5
X1185/X1185N/X1285/X1285N/
S1285/P1185/X1385WH/H6518BD
Function
P1285/P1385W
Description
POWER
Refer to the "Turning the Projector On/Off" section.
MEDIA SETUP
(No function)
ZOOM
Zooms the projector display in or out.
MODE
Chooses a display mode.
Keystone
Adjusts image distortion caused by tilting projection
(±40 degrees).
Four
Selects items or makes adjustments to your selection.
directional
selection
keys
Keypad 0~9
Press "0~9" to input a password in the "Setting" >
"Security" OSD.
VGA
To change source to VGA. This connection supports
analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and
YCbCr (480i/576i).
COMPONENT
To change source to Component video. This connector
supports YPbPr/YCbCr.
S-VIDEO
To change source to S-Video.
10 HDMI™/DVI
To change source to HDMI™ (or DVI). (for the model
with HDMI™ or DVI connector)
11 Infrared
transmitter
Sends signals to the projector.
English
Remote Control Layout
English
Function
Description
12 FREEZE
To pause the screen image.
13 SOURCE
Chooses RGB, component video, S-Video, composite
video, HDMI (MHL) or HDTV source.
14 HIDE
Press "HIDE" to hide screen image; press again to
display the image.
15 MENU
Launches the Onscreen Display (OSD) menu, returns to
the previous step for the OSD menu operation or exits
the OSD menu.
16 PgUp/PgDn
For computer mode only. Use this button to select the
next or previous page. This function is only available
when connected to a computer via a USB cable.
17 VIDEO
To change source to composite video.
18 RATIO
Chooses an aspect ratio.
19 WIRELESS;
LAN/WiFi
(No function)
20
(No function)
Rewind
Play/Pause
Stop
Fast-forward
21 SD/USB A
(No function)
22 USB B
(No function)
23 3D
Press to open the 3D menu for adjusting 3D settings.
24 Laser
Emits visible laser pointer light for presentation
purposes. This function is not available for the
projectors sold in the Japanese market.
7
When your smart device is connected to the projector, you can use some
buttons on the remote control to control your smart device. Press "MODE" for
one second to enter or leave the MHL control mode. After entering the MHL
control mode, press "SOURCE" to switch between the navigation mode
(default), media mode and numeric mode.
Description
Function
MODE
Media mode
Numeric mode
Long press for one second to enter or leave the
MHL control mode.
13 SOURCE
Navigation
mode
After entering the MHL control mode, press to
switch between the navigation mode (default),
media mode and numeric mode.
Four
Up
Up
directional down down
select keys Left
Left
(No function)
(No function)
(No function)
(No function)
Decreases the
volume.
(No function)
Right Right
Increases the
volume.
(No function)
(No function)
(No function)
Enters 0~9.
15 MENU
Keypad 0~9
Goes to the
root menu.
(No function)
(No function)
20
Rewind
(No function)
Enters 1.
Play/Pause
Selects or
enters items.
Stop
Exits current
page.
Rewinds/Plays/
Pauses/Stops/
Fast-forwards
the playing of
media files.
Fast-forward
(No function)
Enters 2.
Enters 3.
(No function)
English
MHL Feature Introduction
English
Getting Started
Connecting the Projector
•
X1185/X1185N/X1285/X1285N/S1285
VGA
Display
Video/S-Video
Output
RS232
DVD player,
Set-top box,
HDTV receiver
R B G
R B G
Speakers
HDTV adapter
S-VIDEO
AUDIO IN -1
VGA IN -2
VGA IN -1
VGA-OUT
RS232
USB
MINI-B
AUDIO IN -2
AUDIO OUT
VIDEO
Description
Description
Power cord
S-Video cable
VGA cable
RS232 cable
VGA to component video/HDTV adapter
USB cable
Composite video cable
3 RCA component cable
Audio cable
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
9
P1185/P1285/P1385W/X1385WH
English
•
VGA
Speakers
Video/S-Video
Output
RS232
DVD player,
Set-top box,
HDTV receiver
Display
Smartphone/
tablet
HDTV adapter
S-VIDEO
DC 5V OUT
AUDIO IN -1
HDMI / MHL
VGA IN -2
VGA IN -1
VGA-OUT
USB
MINI-B
AUDIO IN -2
AUDIO OUT
VIDEO
(P1285/P1385W)
or
Description
Description
Power cord
RS232 cable
VGA cable
USB cable
VGA to component video/HDTV adapter
3 RCA component cable
Composite video cable
10 HDMI (MHL) cable
Audio cable
11 WirelessHD dongle
S-Video cable
12 Wireless dongle
RS232
English
10
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Note: Some smart devices require a converter (supplied by the
smart device maker) to enable the MHL function.
Note: Compatible HDMI/MHL dongles: WirelessHD (MWIHD1),
MWA3, Android (MWND1), ChromecastTM.
11
English
•H6518BD/E341D/HE-813J/H1P1418
VGA
Speakers
RS232
Video/S-Video
DVD player,
Output
Display
Set-top box,
HDTV receiver
Smartphone/
tablet
S-VIDEO DC 5V OUT
AUDIO IN -1
VGA IN -1
HDMI / MHL
VGA-OUT
RS232
USB
MINI-B
AUDIO IN -2
AUDIO OUT
VIDEO
or
Description
Description
Power cord
USB cable
VGA cable
3 RCA component cable
Composite video cable
10 HDMI (MHL) cable
Audio cable
11 WirelessHD dongle
S-Video cable
12 Wireless dongle
RS232 cable
English
12
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Note: Some smart devices require a converter (supplied by the
smart device maker) to enable the MHL function.
Note: Compatible HDMI/MHL dongles: WirelessHD (MWIHD1),
MWA3, Android (MWND1), ChromecastTM.
13
English
Turning the Projector On/Off
Turning On the Projector
Ensure that the power cord and signal cable are securely connected.
The Power LED will light red.
Turn on the projector by pressing
(POWER) on the control panel or
remote control, and the Power indicator LED will turn blue.
Turn on your source (computer, notebook, video player, etc.). The
projector will detect your source automatically (when the Source Lock
function is disabled).
•
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
•
If you connect to multiple sources at the same time, use "SOURCE" on
the control panel or remote control, or the direct source key on the
remote control to switch between inputs.
1&2
S1285
X1185/X1185N/X1285/X1285N/
P1185/X1385WH
P1285/P1385W/H6518BD
English
14
Turning Off the Projector
To turn the projector off, press the power button. This message
appears:
"Please press power button again to complete the shutdown process"
Press the power button again.
The LED Power indicator will turn solid red to indicate standby mode.
It is now safe to unplug the power cord.
When Instant Resume is selected:
The LED Power indicator will turn RED and blink rapidly after the
projector is turned off, and the fan(s) will continue to operate for
about 2 minutes to ensure that the system cools properly.
As long as the power cord remains plugged in, you can press the
power button to turn the projector immediately back on anytime
during the 2-minute shutdown process.
Once the system has finished cooling, the LED Power indicator will
stop blinking and turn solid red to indicate standby mode.
It is now safe to unplug the power cord.
Warning indicators:
•
"Projector Overheated. Lamp will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp will automatically turn off, the projector will automatically
shut down, and the LED Temp indicator will turn solid red. Contact
your local dealer or service center.
•
"Fan failed. Lamp will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED Temp indicator will blink. Contact your local dealer or
service center.
Note: Whenever the projector automatically shuts down and
the LED Temp indicator turns solid red, contact your local
reseller or service center.
15
Adjusting the Height of the Projected Image
The projector is equipped with two elevator feet for adjusting the image
height.
To raise the image:
Use the front Tilt adjusting wheel to raise the image to the desired
height and angle.
Use the rear Tilt adjusting wheel to fine-tune the display angle.
To lower the image:
Use the front Tilt adjusting wheel to lower the image to the desired
height angle.
Use the rear Tilt adjusting wheel to fine-tune the display angle.
Tilt adjusting wheel
Tilt adjusting wheel
English
Adjusting the Projected Image
English
16
How to Optimize Image Size and Distance
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen.
•
SVGA
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 87" and 95".
Note: Remind as below figure, the space of 160 cm height is
required when the projector is located at 3 m distance.
Ma x
scre
en s
iz
95"
Min
scre
en s
iz
87"
Height:
146 cm
Height:
160 cm
From
base to
top of
image
3m
Desired distance
Minimum Screen Size (Min zoom)
Maximum Screen Size (Max zoom)
Desired
From
base
to
From base to
Distance Diagonal
Diagonal
top of image
top of image
(m)
(inch) W (cm) x H (cm)
(inch) W (cm) x H (cm)
(cm)
(cm)





29
59 x 44
49
32
65 x 48
53
1.5
43
88 x 66
73
48
97 x 73
80
106
58
118 x 88
97
64
129 x 97
2.5
72
147 x 110
121
79
161 x 121
133
87
176 x 132
146
95
194 x 145
160
3.5
101
206 x 154
170
111
226 x 169
186
116
235 x 176
194
127
258 x 194
213
4.5
130
265 x 199
218
143
290 x 218
240
145
294 x 221
243
159
323 x 242
266
174
353 x 265
291
191
387 x 290
319
203
412 x 309
340
222
452 x 339
373
232
471 x 353
388
254
516 x 387
426
261
529 x 397
437
286
581 x 435
479
10
289
588 x 441
485
318
645 x 484
532
11
318
647 x 485
534
349
710 x 532
585
12
347
706 x 529
582
381
774 x 581
639
Zoom Ratio: 1.1 x
17
Note: Remind as below figure, the space of 133 cm height is
required when the projector is located at 3 m distance.
Max
scre
en s
iz
79"
Min
scre
en s
iz
72"
Height:
121 cm
Height:
133 cm
From
base to
top of
image
3m
Desired distance
Minimum Screen Size (Min zoom)
Maximum Screen Size (Max zoom)
Desired
From base to
From base to
Distance Diagonal
Diagonal
top of image
top of image
(m)
(inch) W (cm) x H (cm)
(inch) W (cm) x H (cm)
(cm)
(cm)





24
49 x 37
40
26
54 x 40
44
1.5
36
74 x 55
61
40
81 x 60
67
48
98 x 74
81
53
108 x 81
89
2.5
60
123 x 92
101
66
134 x 101
111
72
147 x 110
121
79
161 x 121
133
3.5
84
172 x 129
142
93
188 x 141
155
96
196 x 147
162
106
215 x 161
177
4.5
109
221 x 165
182
119
242 x 181
200
121
245 x 184
202
132
269 x 202
222
145
294 x 221
243
159
323 x 242
266
169
343 x 257
283
185
376 x 282
310
193
392 x 294
324
212
430 x 323
355
217
441 x 331
364
238
484 x 363
399
10
241
490 x 368
404
265
538 x 403
444
11
265
539 x 404
445
291
591 x 444
488
12
289
588 x 441
485
318
645 x 484
532
Zoom Ratio: 1.1 x
English
•
XGA
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 72" and 79".
English
18
•
XGA (fixed-zoom models)
If the projector is 3 m from the screen, good image quality is possible for image
sizes around 242".
Note: Remind as below figure, the space of 424 cm height is
required when located at 3 m distance.
242"
Height:
424 cm
From
base to
top of
image
3m
Desired distance
Screen Size
Desired
From base to
Distance Diagonal
top of image
(m)
(inch) W (cm) x H (cm)
(cm)



81
164 x 123
141
1.5
121
246 x 184
212
161
328 x 246
283
2.5
202
410 x 307
353
242
492 x 369
424
3.5
282
574 x 430
495
323
656 x 492
566
4.5
363
738 x 553
636
403
820 x 615
707
484
984 x 738
848
565
1148 x 861
990
645
1311 x 984
1131
726
1475 x 1107
1273
10
807
1639 x 1230
1414
11
887
1803 x 1352
1555
12
968
1967 x 1475
1697
Zoom Ratio: 1.0 x
19
Note: Remind as below figure, the space of 125 cm height is
required when the projector is located at 3 m distance.
Max
sc re
en s
iz
Min
scre
en s
iz
93"
84"
Height:
114 cm
Height:
125 cm
From
base to
top of
image
3m
Desired distance
Minimum Screen Size (Min zoom)
Maximum Screen Size (Max zoom)
Desired
From base to
From base to
Distance Diagonal
Diagonal
top of image
top of image
(m)
(inch) W (cm) x H (cm)
(inch) W (cm) x H (cm)
(cm)
(cm)





28
61 x 38
38
31
67 x 42
42
1.5
42
91 x 57
57
46
100 x 63
63
56
121 x 76
76
62
133 x 83
83
2.5
70
152 x 95
95
77
167 x 104
104
84
182 x 114
114
93
200 x 125
125
3.5
98
212 x 133
133
108
233 x 146
146
113
242 x 152
152
124
267 x 167
167
4.5
127
273 x 170
170
139
300 x 188
188
141
303 x 189
189
155
333 x 208
208
169
364 x 227
227
186
400 x 250
250
197
424 x 265
265
217
467 x 292
292
225
485 x 303
303
248
533 x 333
333
253
545 x 341
341
279
600 x 375
375
10
281
606 x 379
379
310
667 x 417
417
11
310
667 x 417
417
340
733 x 458
458
12
338
727 x 455
455
371
800 x 500
500
Zoom Ratio: 1.1 x
English
•
WXGA
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 84" and 93".
English
20
•
1080p
If the projector is 3 m from the screen, good image quality is possible for image
sizes between 90" and 118".
Note: Remind as below figure, the space of 154 cm height is
required when the projector is located at 3 m distance.
Max
sc re
en s
ize
Min
scre
en s
iz
118"
90"
Height:
118 cm
Height:
154 cm
From
base to
top of
image
3m
Desired distance
Minimum Screen Size (Min zoom)
Maximum Screen Size (Max zoom)
Desired
From
base
to
From base to
Distance Diagonal
Diagonal
top of image
top of image
(m)
(inch) W (cm) x H (cm)
(inch) W (cm) x H (cm)
(cm)
(cm)





30
67 x 38
39
39
87 x 49
1.5
45
100 x 56
59
59
130 x 73
77
60
133 x 75
79
79
174 x 98
103
2.5
75
167 x 94
98
98
217 x 122
128
90
200 x 113
118
118
261 x 147
154
3.5
105
233 x 131
138
137
304 x 171
180
120
267 x 150
158
157
348 x 196
205
4.5
136
300 x 169
177
177
391 x 220
231
151
333 x 188
197
196
435 x 245
257
181
400 x 225
236
236
522 x 293
308
211
467 x 263
276
275
609 x 342
360
241
533 x 300
315
314
696 x 391
411
271
600 x 338
354
354
783 x 440
462
10
301
667 x 375
394
393
870 x 489
514
11
331
733 x 413
433
432
957 x 538
565
12
361
800 x 450
473
471
1043 x 587
616
Zoom Ratio: 1.3 x
51
21
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring.
•
SVGA
To obtain an image size of 70", set the projector at a distance between 2.2 m
and 2.4 m from the screen and adjust the zoom level accordingly.
70"
Desired
image size
Height:
117 cm
From base
to top of
image
2.2 m
2.4 m
Desired Image Size
Diagonal (inch)

W (cm) x H (cm)
Desired distance
Distance (m)
Top (cm)
Max zoom

Min zoom

From base to top of
image < D >
30
61 x 46
1.0
50
40
81 x 61
1.3
1.4
67
50
102 x 76
1.6
1.7
84
60
122 x 91
1.9
2.1
101
70
142 x 107
2.2
2.4
117
80
163 x 122
2.5
2.8
134
90
183 x 137
2.8
3.1
151
100
203 x 152
3.1
3.5
168
120
244 x 183
3.8
4.1
201
150
305 x 229
4.7
5.2
251
180
366 x 274
5.7
6.2
302
200
406 x 305
6.3
6.9
335
250
508 x 381
7.9
8.6
419
300
610 x 457
9.4
Zoom Ratio: 1.1 x
503
English
How to Get a Preferred Image Size by Adjusting
Distance and Zoom
English
22
•
XGA
To obtain an image size of 70", set the projector at a distance between 2.6 m
and 2.9 m from the screen and adjust the zoom level accordingly.
70"
Desired
image size
Height:
117 cm
From base
to top of
image
2.6 m
2.9 m
Desired Image Size
Diagonal (inch)

W (cm) x H (cm)
Desired distance
Distance (m)
Top (cm)
Max zoom

Min zoom

From base to top of
image < D >
30
61 x 46
1.2
50
40
81 x 61
1.5
1.7
67
50
102 x 76
1.9
2.1
84
60
122 x 91
2.3
2.5
101
70
142 x 107
2.6
2.9
117
80
163 x 122
3.0
3.3
134
90
183 x 137
3.4
3.7
151
100
203 x 152
3.8
4.1
168
120
244 x 183
4.5
5.0
201
150
305 x 229
5.7
6.2
251
180
366 x 274
6.8
7.5
302
200
406 x 305
7.6
8.3
335
250
508 x 381
9.4
10.4
419
300
610 x 457
11.3
Zoom Ratio: 1.1 x
503
23
70"
Desired
image size
Height:
123 cm
From
base to
top of
image
0.9 m
Desired distance
Desired Image Size
Diagonal (inch)

W (cm) x H (cm)
Distance (m)
Top (cm)
Max zoom

Min zoom

From base to top of
image < D >
30
61 x 46
0.4
53
40
81 x 61
0.5
0.5
70
50
102 x 76
0.6
0.6
88
60
122 x 91
0.7
0.7
105
70
142 x 107
0.9
0.9
123
80
163 x 122
1.0
1.0
140
90
183 x 137
1.1
1.1
158
100
203 x 152
1.2
1.2
175
120
244 x 183
1.5
1.5
210
150
305 x 229
1.9
1.9
263
180
366 x 274
2.2
2.2
315
200
406 x 305
2.5
2.5
351
250
508 x 381
3.1
3.1
438
300
610 x 457
3.7
Zoom Ratio: 1.0 x
526
English
•
XGA (fixed-zoom models)
To obtain an image size of 70" set the projector at a distance 0.9 m from the
screen.
English
24
•
WXGA
To obtain an image size of 70" set the projector at a distance between 2.3 m
and 2.5 m from the screen and adjust the zoom level accordingly.
70"
Desired
image size
Height:
94 cm
From base
to top of
image
2.3 m
2.5 m
Desired Image Size
Diagonal (inch)

W (cm) x H (cm)
Desired distance
Distance (m)
Top (cm)
Max zoom

Min zoom

From base to top of
image < D >
30
65 x 40
1.1
40
40
86 x 54
1.3
1.4
54
50
108 x 67
1.6
1.8
67
60
129 x 81
1.9
2.1
81
70
151 x 94
2.3
2.5
94
80
172 x 108
2.6
2.8
108
90
194 x 121
2.9
3.2
121
100
215 x 135
3.2
3.6
135
120
258 x 162
3.9
4.3
162
150
323 x 202
4.8
5.3
202
180
388 x 242
5.8
6.4
242
200
431 x 269
6.5
7.1
269
250
538 x 337
8.1
8.9
337
300
646 x 404
9.7
Zoom Ratio: 1.1 x
404
25
70"
Desired
image size
Height:
92 cm
From base
to top of
image
1.8 m
2.3 m
Desired Image Size
Diagonal (inch)

W (cm) x H (cm)
Desired distance
Distance (m)
Top (cm)
Max zoom

Min zoom

From base to top of
image < D >
30
66 x 37
1.0
39
40
89 x 50
1.0
1.3
52
50
111 x 62
1.3
1.7
65
60
133 x 75
1.5
2.0
78
70
155 x 87
1.8
2.3
92
80
177 x 100
2.0
2.7
105
90
199 x 112
2.3
3.0
118
100
221 x 125
2.5
3.3
131
120
266 x 149
3.1
4.0
157
150
332 x 187
3.8
5.0
196
180
398 x 224
4.6
6.0
235
200
443 x 249
5.1
6.6
262
250
553 x 311
6.4
8.3
327
300
664 x 374
7.6
Zoom Ratio: 1.3 x
392
English
•
1080p
To obtain an image size of 70" set the projector at a distance between 1.8 m
and 2.3 m from the screen and adjust the zoom level accordingly.
English
26
User Controls
Installation Menu
The Installation menu provides an Onscreen Display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No
signal" is displayed on the screen.
Turn on the projector by pressing
remote control.
(POWER) on the control panel or
Press "MENU" on the control panel or remote control to launch the
OSD for projector installation and maintenance.
The background pattern acts as a guide to adjusting the calibration
and alignment settings, such as screen size and distance, focus and
more.
Note: The OSD screenshot is for reference only and may differ from the
actual design.
The Installation menu includes several options.
Use the up and down arrow keys to select an option, the left and right arrow keys to
adjust selected option settings, and the right arrow key to enter a submenu for
feature setting. The new settings will be saved automatically upon exiting the menu.
Press "MENU" anytime to exit the menu and return to the Acer
welcome screen.
27
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the control panel or remote
control.
•
When the OSD is displayed, use
to select an item in the main menu.
After selecting the desired main menu item, press
for feature setting.
•
Use
to enter a submenu
to select the desired item and adjust the settings by using
•
Select the next item to be adjusted in the submenu and adjust as described
above.
•
Press "MENU" on the control panel or remote control, the screen will
return to the main menu.
•
To exit the OSD menu, press "MENU" on the control panel or remote
control again. It will close and the projector will automatically save the
new settings.
Main menu
Setting
Submenu
Note: Some of the following OSD settings may not be available. Please refer
to the actual OSD of your projector.
English
Onscreen Display (OSD) Menus
English
28
Color
The light sensor of LumiSense+ technology can intelligently
optimizes the brightness and color saturation of projected
image based on actual ambient light. The feature greatly
enhances dark detail visibility and color saturation.
LumiSense
•
Off: For normal mode. (ambient light sensor is off)
•
Auto Bright: Light sensor is on to automatically detect
ambient light and optimize the brightness and color
saturation of projected image.
•
Dynamic Black: automatically optimize the display of
dark movie scenes enabling them to be shown in
incredible detail.
There are many factory presets optimized for various types
of images.
Display Mode
Wall Color
•
Bright: For brightness optimization.
•
Presentation: For meeting presentation with higher
brightness.
•
Standard: For common environment.
•
Movie: For brighter and general movie/video/photo
playing.
•
Dark Cinema: For dark movie content.
•
Video: For playing video in a bright environment.
•
Picture: For graphic picture.
•
Game: For game content.
•
Education: For education environment.
•
Sport: For sport picture.
•
User: Memorize user’s settings.
Use this function to choose a proper color according to the
wall. There are several choices, including White, Light
Yellow, Light Blue, Pink and Dark Green. It will compensate
for the color deviation due to the wall color to show the
correct image tone.
Adjusts the brightness of the image.
Brightness
•
Press
to darken the image.
•
Press
to lighten the image.
29
•
Press
to decrease the contrast.
•
Press
to increase the contrast.
Adjusts a video image from black and white to fully
saturated colors.
Saturation
•
Press
image.
to decrease the amount of color in the
•
Press
image.
to increase the amount of color in the
Adjusts the color balance of red and green.
Tint
•
Press
image.
to increase the amount of green in the
•
Press
to increase the amount of red in the image.
Color
Temperature
Adjusts the color temperature. At higher color
temperatures, the screen looks colder; at lower color
temperatures, the screen looks warmer.
Dynamic Black
If turned on, the projector dynamically adjusts the power
consumption of the lamp according to the brightness of
the image being projected. When projecting darker images
the power consumption will be reduced and the contrast of
the image will also be enhanced.
Gamma
Effects the representation of dark scenery. With greater
gamma value, dark scenery will look brighter.
English
Contrast
Controls the degree of difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
English
30
Advanced
•
Ind. Color Management: Adjusts the red, green, blue,
cyan, yellow and magenta colors.
•
- Ind. Hue: Changes the hue of the color selected.
•
- Ind. Saturation: Adjusts a video image from black
and white to fully saturated color.
•
- Ind. Gain: Adjusts the contrast levels.
•
Brilliant Color: Produces an expanded on-screen color
spectrum that delivers enhanced color saturation for
bright, true-to-life images. This feature is "On" by
default.
•
White Peaking: Increases the brightness of whites that
are near 100%. (Video sources only)
•
Film Mode: Sets the image optimized to 24-frame True
Film mode for more realistic cadence of film playback
during motion sequences.
•
Noise Reduction: Adjusts the level of noise reduction
that helps to eliminate unwanted noise in the picture.
•
Black Extension: Analyzes the current input image and
calculates an offset value which is then added to the
analog to digital converter black level value. This
ensures optimum black level for each analog source.
Note: "Saturation" and "Tint" functions are not supported under computer
mode.
31
Projection
Projection
Mode
Projection
Location
•
Front-Desktop: The factory default setting.
•
Front-Ceiling: When you select this function, the
projector inverts the image for ceiling-mounted
projection.
•
Rear-Desktop: When you select this function, the
projector reverses the image so that you can project
behind a translucent screen.
•
Rear-Ceiling: When you select this function, the
projector reverses and inverts the image at same time.
You can project from behind a translucent screen with
ceiling mounted projection.
•
Front: The factory default setting.
•
Rear: Reverses the image so you can project from
behind a translucent screen.
•
Auto: Automatically adjusts projection location of
image.
•
•
Desktop
Ceiling: Turns the image upside down for ceilingmounted projection.
Use this function to choose your desired aspect ratio.
•
Auto: Keeps the image with original width-height ratio
and maximizes the image to fit native horizontal or
vertical pixels.
•
Full (for WXGA/1080p models): The image will be
displayed making full use of the horizontal and vertical
pixels.
•
4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
•
16:9: The image will be scaled to fit the screen and
displayed using a 16:9 ratio.
•
L.Box (for WXGA/1080p models): Keeps the original
signal aspect ratio and zooms in by 1.333 times.
Aspect Ratio
Auto Keystone
Automatically adjusts image distortion caused by tilting
projection (±40 degrees).
English
Image
English
32
Keystone
Manually adjusts image distortion caused by tilting
projection (±40 degrees).
Manual
Keystone
This function is unavailable when Auto Keystone is set
to "On".
Adjusts the sharpness of the image.
Sharpness
•
Press
to decrease the sharpness.
•
Press
to increase the sharpness.
H. Position
(Horizontal
Position)
•
Press
to move the image left.
•
Press
to move the image right.
V. Position
(Vertical
Position)
•
Press
to move the image down.
•
Press
to move the image up.
Frequency
Changes the projector’s refresh rate to match the frequency
of your computer’s graphics card. If you experience a vertical
flickering bar in the projected image, use this function to
correct it.
Tracking
Synchronizes the signal timing of the display with the
graphics card. If you experience an unstable or flickering
image, use this function to correct it.
Adjusts the color range of the HDMI image data to prevent
color display error.
HDMI Color
Range
•
Auto: Automatically adjusts the color range by
information from the player.
•
Limited Range: Processes the input image as limited
color range data.
•
Full Range: Processes the input image as full color range
data.
Adjusts the overscan ratio of the HDMI image on screen.
•
Auto: Automatically adjusts the overscan ratio by
information from the player.
•
Underscan: Always no overscan on the HDMI image.
•
Overscan: Always keep overscan on the HDMI image.
HDMI Scan Info
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under video mode.
33
Setting
Startup Screen
Use this function to select your desired startup screen. If you
change the setting, it will take effect when you exit the OSD
menu.
•
Acer: The default startup screen of your Acer projector.
•
User: Use the memorized picture from the "Screen
Capture" function.
Use this function to customize the startup screen. To capture
the image that you want to use as the startup screen, follow
the instructions below.
Notice
Before proceeding with the following steps, make sure that
the "Keystone" is set to the default value "0", and the
"Aspect Ratio" is set to "4:3". For details, refer to the "Image"
section.
Screen Capture
•
Change the "Startup Screen" from the default setting
"Acer" to "User".
•
Select "Screen Capture" to customize the startup screen.
•
A dialog box appears to confirm the action. Choose
"Yes" to use the current image as your customized
startup screen. Choose "No" to cancel the screen capture
and exist the Onscreen Display (OSD).
•
A message appears stating that the screen capture is in
progress.
•
When the screen capture is finished, the message
disappears and the original display is shown.
Source Lock
Selecting "On" enables the function and when switching
input signals, you need to press "SOURCE" on the control
panel or remote control, or the direct source key on the
remote control. When this function is disabled, the projector
will detect your source automatically.
Closed Caption
Selects a preferred closed captioning mode from CC1, CC2,
CC3, CC4 (CC1 displays captions in the primary language in
your area). Select "Off" to turn off the captioning feature.
This function is only available when a composite video or SVideo input signal is selected and its system format is NTSC.
English
Note: "HDMI Color Range" and "HDMI Scan Info" are only available when
the input signal is HDMI.
English
34
VGA OUT
(Standby)
Selecting "On" enables the function. The projector can output
a VGA signal when it is in standby mode and the VGA IN (or
VGA IN 1) and VGA OUT sockets are correctly connected to the
devices.
Enabling this function slightly increases the standby
power consumption.
DC 5V Out
(Standby)
Selecting "On" enables the function. Both micro USB cable
inside the projector and the DC 5V out port/USB A port (if
available) on the back of the projector can output 5V power
when it is in standby mode.
Enabling this function slightly increases the standby
power consumption.
HDMI CEC
(Internal)
Selecting "On" allows synchronized power ON/OFF operation
between the projector and a CEC-compatible device
connected to the HDMI/MHL port of the projector.
This function is only available for the internal HDMI/
MHL port.
Reset
Press
after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
Security
This projector provides a useful security function for the
administrator to manage the projector.
Press
to change the "Security" setting. If the security
function is enabled, your must enter "Administrator
Password" first before changing the security setting.
Security
The factory default of "Administrator Password" is
"1234".
•
Select "On" to enable the security function. You have to
enter password depending on the "Security Mode".
Please refer to "User Password" section for details.
•
If "Off" is selected, you can switch on the projector
without password.
35
•
Press
•
The range is from 10 to 990 minutes.
•
When time is up, the projector will request you to enter
the password again.
•
The factory default setting of "Timeout (Min.)" is "Off".
•
Once the security function is enabled, the projector will
request you to enter password when switching on the
projector. Both "User Password" and "Administrator
Password" can be accepted for this dialogue.
to select timeout duration.
User Password
Security
•
Press
•
Use the numerical keys on the remote control to set the
password and press "MENU" to confirm.
•
To delete the digits, Press
•
Enter the password again when you see "Confirm
Password" displayed.
•
The password should be 4~8 digits in length.
•
If you select "Request password only after plugging
power cord", you are requested to input the password
every time the power cord is plugged.
•
If you select "Always request password while projector
turns on", you are requested to input the password every
time the projector is turned on.
to set up or change "User Password".
English
Timeout (Min.)
Once "Security" is set to "On", you can set timeout function.
36
English
Administrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
•
Press
to change "Administrator Password".
•
Security
The factory default of "Administrator Password" is
"1234".
If you forget your administrator password, do the following
to retrieve the administrator password:
•
Enter the unique 6-digit "Universal Password" which is
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
•
If the Security Card is lost, please contact your local Acer
service center.
Lock User Startup Screen
This function is set to "OFF" by default. If set to "ON", the
startup screen is locked and cannot be changed by the
"Startup Screen" and "Screen Capture" functions.
37
ECO Mode
Choose "On" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.
High Altitude
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
speed continuously to cool down the projector’s
temperature.
•
Instant Off: Enables you to turn off the projector
immediately without fan cooling process by pressing
the power button twice.
•
Instant Resume: Enables you to restart the projector
immediately within 2 minutes after turning it off.
Turn Off Mode
Auto Shutdown
(Minutes)
The projector will automatically shut down while there is
no signal input detected after the time you set.
AC Power On
Selecting "On" enables the function. The projector will
automatically turn on when power is supplied via the
power cord.
Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding
Lamp Hour Reset
Choose this function to show or hide warning message
when the changing lamp message is displayed. The
message will show up 30 hours before end of life.
Press
after choosing "Yes" to reset the lamp hour
counter to 0 hours.
Audio
Volume
BT Speaker
Connection
Mute
Power On/Off
Volume
•
Press
to decrease the volume.
•
Press
to increase the volume.
•
Bluetooth: Selecting "On" enables the function.
•
Bluetooth Search: Press
to search for available
devices. Select a device in the list of found devices.
The projector will automatically try to connect to
the last connected device the next time you enable
the Bluetooth function.
•
Choose "On" to turn mute on.
•
Choose "Off" to turn mute off.
Select this function to adjust the notification volume
when turning the projector on/off.
English
Management
English
38
Select this function to adjust the volume of any
warning notifications.
Alarm Volume
3D
Selects "On" to enable the 3D function supported by DLP 3D
technology.
3D
2D to 3D
•
On: Select this item while using DLP 3D glasses, quad
buffer (NVIDIA/ATI...) graphics card and HQFS format file
or DVD with corresponding SW player.
•
•
Off: Turns off the 3D mode.
•
Mode: Provides several preset 2D to 3D conversion
modes for your selection. You can also select User and
use the "Convergence" and "Depth" functions described
below to setup your customized conversion mode.
•
Convergence: Changes the convergence effect that is
used when converting 2D contents to 3D.
•
Depth: Adjusts the image depth of 3D objects.
2D to 3D: Converts 2D contents to 3D. Note that DLP 3D
glasses are required to obtain the best 3D effect.
"Depth" and "Convergence" are only available when
"Mode" is set to "User".
3D Format
If the 3D content is not displayed correctly, you can select a
3D format that suits the 3D content you are viewing and
obtain the best result.
3D Sync Invert
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "Invert" to get best
match of left/right image sequence to get the correct image
(for DLP 3D).
24P 3D
Choose 96Hz or 144Hz for 24p 3D.
Choose "On" to display the 3D warning message.
3D Warning
Message
39
English
Note: Supported 3D signal timings:
Signal source type
Supported timing
Video/S-Video/Component
video
HQFS 3D (480i@60Hz), 576i@50Hz
VGA/HDMI (PC mode)
640 x 480@50/60/100/120Hz
800 x 600@50/60/100/120Hz
1024 x 768@50/60/100/120Hz
1280 x 800@50/60/100/120Hz (RB)
HDMI (Video mode)
HQFS 3D (480i@60Hz) , 576i@50Hz,
Frame Packing (1080p@23.98/24Hz,
720p@50/60Hz)
Side-by-Side Horizontal (1080i@50/60Hz,
1080p@50/60Hz)
Top-and-Bottom (720p@50/60Hz,
1080p@23.97/24Hz, 1080p@50/60Hz)
It needs correct settings on graphics card 3D application program for correct
3D display.
The SW players, such as Stereoscopic Player and DDD TriDef Media Player
can support 3D format files. You can download these players on the web
page below.
- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef3-D-Experience-4.0.2.html
Note: "3D Sync Invert" and "3D Format" are only available when "3D" is
enabled.
Language
Language
Sets a language for the OSD menus. Use
select your preferred language.
to
English
40
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
Problem
No image appears
onscreen
Partial, scrolling
or incorrectly
displayed image
(For PC (Windows
95/98/2000/XP/
Win7/Vista))
Solution
•
Make sure all the cables are correctly connected as
described in the "Getting Started" section.
•
Ensure none of the connector pins are bent or
broken.
•
Make sure the projector is switched on.
•
Press "RESYNC" on the control panel or remote
control.
•
For an incorrectly displayed image:
•
Open "My Computer > Control Panel," and
then double-click the "Display" icon.
•
Select the "Settings" tab.
•
Verify that your display resolution setting is
lower than or equal to 1600 x 1200 or 1920 x
1080.
•
Click the "Advanced Properties" button.
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
Verify that the resolution setting is lower than
or equal to 1600 x 1200 or 1920 x 1080.
•
Click the "Change" button under the
"Monitor" tab.
•
Click "Show all devices > Standard monitor
types" under the SP box, and choose the
resolution mode you need under the "Models"
box.
•
Verify that the resolution setting of the
monitor display is lower than or equal to 1600
x 1200 or 1920 x 1080.
41
Partial, scrolling
or incorrectly
displayed image
(For notebooks)
•
Press "RESYNC" on the control panel or remote
control.
•
For an incorrectly displayed image:
•
•
The screen of the
notebook
computer is not
displaying your
presentation
Image is unstable
or flickering
Image has vertical
flickering bar
Image is out of
focus
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP
[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
•
If you are using a Microsoft® Windows® based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
•
If you are using an Apple® Mac® OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On."
•
Use "Tracking" to correct it. Refer to the "Image"
section for more information.
•
Change the display color setting on your computer.
•
Use "Frequency" to make an adjustment. Refer to
the "Image" section for more information.
•
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
•
•
Adjust the focus ring on the projector lens.
Make sure the projection screen is within the
required distance:
X1185/X1185N/P1185/X1285/X1285N/P1285/P1385W/
X1385WH:
4.6 to 24.9 feet (1.4 to 7.6 meters)
S1285:
4.9 to 24.9 feet (1.5 to 7.6 meters)
H6518BD/E341D/HE-813J/H1P1418:
3.8 to 24.9 feet (1.15 to 7.6 meters)
Refer to the "How to Get a Preferred Image Size by
Adjusting Distance and Zoom" section for more
information.
English
English
42
10
11
Image is stretched
when displaying a
"widescreen"
DVD title
Image is too small
or too large
Image has slanted
sides
Image is reversed
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•
If you play a 4:3 format DVD title, please change the
format to 4:3 with the projector OSD.
•
If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
•
•
Adjust the zoom lever on the top of the projector.
•
Press "MENU" on the control panel or remote
control. Go to "Image" > "Aspect Ratio" and try
different settings.
•
If possible, reposition the projector so that it is
centered on the screen and below the bottom of the
screen.
•
Press the Keystone correction keys on the control
panel or remote control until the image becomes
square.
•
Press "MENU" on the control panel or remote
control to open the OSD menu. Go to "Image" >
"Auto Keystone" or "Image" > "Keystone" to make
adjustments.
•
Select "Image" > "Projection Mode", "Image" >
"Projection Location" on the OSD and adjust the
projection direction.
Move the projector closer to or further from the
screen.
Problems with the Projector
Condition
Solution
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, contact
your local dealer or Acer service center.
43
Condition
Message
Message Reminder
Fan Fail - the system fan is not working.
Fan Fail.
Lamp will automatically turn off soon.
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed to
cool down before it is used. Please also check the dust filters if
they are installed. If the dust filter is clogged with dust, please
clean it.
Projector Overheated.
Lamp will automatically turn off soon.
Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
Lamp is approaching the end of its useful life in full power operation.
Replacement suggested!
English
OSD Messages
English
44
LED & Alarm Definition Listing
LED Messages
Message
Power LED
LAMP LED
TEMP LED
Red
Blue
Red
Red
Standby
(Power cord plugged in)
--
--
--
Power on
--
--
--
Lamp retry
--
Quick
flashing
--
--
Turning off (Cooling
state)
Quick
flashing
--
--
--
Turning off (Cooling
completed)
--
--
--
Error (Thermal failure)
--
--
Error (Fan lock failure)
--
--
Quick
flashing
Error (Lamp breakdown)
--
--
Error (Color wheel
failure)
--
Quick
flashing
--
45
Turn the projector off by pressing
(POWER). Allow the projector at least 45
minutes to cool down. Disconnect the power cord.
Use a screwdriver to remove the screw(s) from the cover. (Illustration #1)
Push up and remove the cover. (Illustration #2)
Locate the HDMI (MHL) connector beside the focus/zoom ring.
Insert the WirelessHD dongle (MWIHD1) or other HDMI/MHL dongle into
the HDMI (MHL) connector. (Illustration #3)
A micro USB cable is also available if you need to power the HDMI/MHL
dongle.
Replace the cover and tighten the screw(s). (Illustration #4 - #5)
English
Using the inner connector(s)
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
Drill four holes into a solid, structurally sound part of the ceiling, and
secure the mount base.
13 m
20
.9
49mm
130 mm
mm
8.4
English
46
Note: Screws are not included. Please obtain the appropriate
screws for your type of ceiling.
Secure the ceiling rod using the appropriate type of cylinder screws.
Ceiling Mount Base
- Attach to ceiling
Short Rod
Long Rod
Extension Rod
Screw Type A
50 mm length / 8 mm diameter -
Large Cylinder Cap
Allen Key
- For tighten/loosen
Tightening Screw
Medium Rod
47
Use the appropriate number of screws for the projector size to attach the
projector to the ceiling mount bracket.
Screw Type B
Large Washer
Smaller Washer
Projector Bracket
Supports projector and
allows for adjustments
Spacer
- For heat dissipation
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution. Use two washers for extra support, if deemed
necessary.
Attach the ceiling bracket to the ceiling rod.
Tightening Screw
Large Cylinder Cap
Screw Type A
50 mm length /8 mm diameter
Allen Key
- For tighten/loosen
English
Adjust the angle and positioning as necessary.
Tightening Screw
Allen Key
30
Allen Key
Tightening Screw
Note: The appropriate type of screw and washer for each model is
listed in the table below. 4 mm diameter screws are enclosed in
the screw pack.
Screw Type B
Washer Type
Diameter (mm)
Length (mm)
Large
Small
25
48.39 mm
19.23 mm
89.40 mm
English
48
121.61 mm
49
The specifications below are subject to change without notice. For final specs,
please refer to Acer's marketing documentation.
Projection system
DLP™
Resolution
•
X1185/X1185N/P1185:
Native: SVGA (800 x 600)
Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080),
WUXGA (1920 x 1200) (supports reduce blanking only)
•
X1285/X1285N/S1285/P1285:
Native: XGA (1024 x 768)
Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080),
WUXGA (1920 x 1200) (supports reduce blanking only)
•
P1385W/X1385WH:
Native: WXGA (1280 x 800)
Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080),
WUXGA (1920 x 1200) (supports reduce blanking only)
•
H6518BD/E341D/HE-813J/H1P1418
Native: 1080p (1920 x 1080)
Maximum: WUXGA (1920 x 1200) (supports reduce
blanking only)
Computer compatibility
Refer to the "Compatibility Modes" section for more
information.
Video compatibility
NTSC (3.58/4.43), PAL (M/N), PAL 60, SECAM, HDTV
(720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i,
576i)
Aspect ratio
•
X1185/X1185N/P1185/X1285/X1285N/S1285/
P1285:
Auto, 4:3 (native), 16:9
•
P1385W/X1385WH/H6518BD/E341D/HE-813J/H1P1418:
Auto, 4:3, 16:9, Full, L.Box
Displayable colors
1.07 billion colors
Projection lens
•
X1185/X1185N/P1185:
F = 2.56 - 2.68, f = 22.04 mm - 24.14 mm,
1:1.1 Manual Zoom and Manual Focus
•
X1285/X1285N/P1285:
F = 2.56 - 2.8, f = 21.00 mm - 23.10 mm,
1:1.1 Manual Zoom and Manual Focus
•
S1285:
F = 2.6, f = 6.9 mm,
1:1.0 Manual Zoom and Manual Focus
•
P1385W/X1385WH:
F = 2.56 - 2.8, f = 21.00 mm - 23.10 mm,
1:1.1 Manual Zoom and Manual Focus
•
H6518BD/E341D/HE-813J/H1P1418:
F = 2.59 - 2.87, f = 16.88 mm - 21.88 mm,
1:1.3 Manual Zoom and Manual Focus
English
Specifications
English
50
Projection screen size (diagonal)
with clear focus
•
X1185/X1185N/P1185:
54" (138 cm) - 300" (762 cm)
•
X1285/X1285N/P1285:
55" (138 cm) - 300" (762 cm)
•
S1285:
60" (152 cm) - 300" (762 cm)
•
P1385W/X1385WH:
55" (139 cm) - 300" (762 cm)
•
H6518BD/E341D/HE-813J/H1P1418:
45" (115 cm) - 300" (762 cm)
Projection distance with clear
focus
•
X1185/X1185N/P1185:
7.8' (2.4 m) - 39.2' (11.9 m)
•
X1285/X1285N/P1285:
7.4' (2.3 m) - 37.2' (11.3 m)
•
S1285:
2.4' (0.7 m) - 12.2' (3.7 m)
•
P1385W/X1385WH:
6.4' (1.9 m) - 31.8' (9.7 m)
•
H6518BD/E341D/HE-813J/H1P1418:
4.9' (1.5 m) - 25.1' (7.6 m)
Throw ratio
•
X1185/X1185N/P1185/X1285/X1285N/P1285:
78"±3% @ 3.1 m (1.96 - 2.15)
•
S1285:
78"±3% @ 0.96 m (0.61)
•
P1385W/X1385WH:
87"±3% @ 2.9 m (1.55 - 1.7)
•
H6518BD/E341D/HE-813J/H1P1418:
95"±3% @ 2.42 m (1.15 - 1.5)
Horizontal scan rate
31 - 99 KHz
Vertical refresh scan rate
23 - 120 Hz
Keystone correction
•
P1185/P1285/P1385W/X1385WH/H6518BD/E341D/HE-813J/H1P1418:
+/-40 Degrees (Vertical), Manual & Auto
•
X1185/X1185N/X1285/X1285N/S1285:
+/-40 Degrees (Vertical), Manual
Digital zoom
2X
Audio
•
X1185/X1185N/X1285/X1285N/S1285/P1185/
X1385WH:
3W x 1
•
P1285/P1385W/H6518BD/E341D/HE-813J/H1P1418:
10W x 1
Weight
Approximate 3.3 kg (7.26 lbs.)
Dimensions (W x D x H)
415 x 320 x 180 mm (13.6’ x 10.5’ x 5.9’)
Power supply
Universal AC input 100 - 240 V, input frequency 50/60
Hz
51
•
X1185/X1185N/P1185/X1285/X1285N/S1285/
P1285/P1385W/X1385WH:
190 W
•
H6518BD/E341D/HE-813J/H1P1418:
210 W
Operating temperature
I/O connectors
0ºC to 40ºC / 32ºF to 104ºF
X1185/X1185N/X1285/X1285N/S1285:
•
•
•
•
•
•
•
•
•
Power socket x 1
USB (Type mini B) x 1
VGA input x 2
VGA output x 1
RS232 x 1
Composite video x 1
S-Video x 1
3.5 mm audio jack input x 2
3.5 mm audio jack output x 1
P1185/X1385WH:
•
•
•
•
•
•
•
•
•
•
•
Power socket x 1
USB (Type mini B) x 1
VGA input x 2
VGA output x 1
RS232 x 1
Composite video x 1
S-Video x 1
HDMI/MHL x 1
USB Type A (DC 5V OUT) x 1
3.5 mm audio jack input x 2
3.5 mm audio jack output x 1
English
Power consumption (typical)
52
English
P1285/P1385W:
•
•
•
•
•
•
•
•
•
•
•
•
Power socket x 1
•
•
•
•
•
•
•
•
•
•
•
•
•
Power socket x 1
•
•
•
•
•
•
•
AC power cord x 1
•
•
•
•
Composite video cable x 1
USB (Type mini B) x 1
VGA input x 2
VGA output x 1
RS232 x 1
Composite video x 1
S-Video x 1
HDMI/MHL x 2
USB Type A (DC 5V OUT) x 1
3.5 mm audio jack input x 2
3.5 mm audio jack output x 1
Micro USB cable x 1
H6518BD/E341D/HE-813J/H1P1418:
Standard package contents
Accessory (optional)
USB (Type mini B) x 1
VGA input x 1
VGA output x 1
Component video input x 1
RS232 x 1
Composite video x 1
S-Video x 1
HDMI/MHL x 2
USB Type A (DC 5V OUT) x 1
3.5 mm audio jack input x 2
3.5 mm audio jack output x 1
Micro USB cable x 1
VGA cable x 1
Remote control x 1
Battery x 2 (for the remote control)
User's guide (CD-ROM) x 1
Quick start guide x 1
Security card x 1
Carrying case x 1
Dust filter x 1
WirelessHD dongle kit (MWIHD1) x 1
* Design and specifications are subject to change without notice.
53
English
Compatibility Modes
VGA Analog - PC Signal
Mode
VGA
SVGA
XGA
Resolution
640 x 480
800 x 600
1024 x 768
1152 x 864
SXGA
1280 x 1024
V.Frequency [Hz]
H.Frequency
[KHz]
60
31.47
72
37.86
75
37.50
85
43.27
120
61.91
56
35.20
60
37.88
72
48.08
75
46.88
85
53.67
120
77.43
60
48.36
70
56.48
75
60.02
85
68.68
120
98.96
70
63.85
75
67.50
85
77.10
60
63.98
72
76.97
75
79.98
85
91.15
1280 x 960
60
60.00
1280 x 960
75
75.00
SXGA+
1400 x 1050
60
65.32
UXGA
1600 x 1200
60
75.00
640 x 480
60
31.50
640 x 480
66.6 (67)
35.00
800 x 600
60
37.88
1024 x 768
60
48.36
1024 x 768
75
60.241
1152 x 870
75
68.681
QuadVGA
PowerBook G4
54
60
47.78
1280 x 768
75
60.29
1280 x 768
85
68.63
1280 x 720
60
45.00
1280 x 800
60
49.70
1280 x 800 - RB
120
101.6
1440 x 900
60
55.94
1680 x 1050
60
65.29
47.71
English
1280 x 768
WXGA
1366 x 768
60
1920 x 1080-RB
60
66.60
1920 x 1080-EIA
60
67.50
1024 x 600
60
37.50
1920 x 1200-RB
59.95
74.04
HDMI - PC Signal
V.Frequency [Hz]
H.Frequency
[KHz]
VGA_60
59.94
31.469
VGA_72
72.809
37.861
Mode
VGA_75
Resolution
75
37.5
VGA_85
85.008
43.269
VGA_120
119.518
61.91
SVGA_56
56.25
35.156
SVGA_60
60.317
37.879
SVGA_72
72.188
48.077
75
46.875
SVGA_75
640 x 480
800 x 600
SVGA_85
85.061
53.674
SVGA_120
119.854
77.425
XGA_60
60.004
48.363
XGA_70
70.069
56.476
75.029
60.023
119.804
98.958
XGA_75
1024 x 768
XGA_120
SXGA_75
75
67.5
84.99
77.094
SXGA_60
60.02
63.981
SXGA_72
72
76.97
75.025
79.976
85.024
91.146
75
75
SXGA_85
SXGA_75
1152 x 864
1280 x 1024
SXGA_85
QuadVGA_75
1280 x 960
55
1400 x 1050
59.978
UXGA_60
1600 x 1200
60
75
Mac G4
640 x 480@60Hz
59.94
31.469
MAC13
640 x 480@67Hz
66.667
35
Mac G4
800 x 600@60Hz
60.317
37.879
Mac G4
1024 x 768@60Hz
60.004
48.363
MAC19
1024 x 768@75Hz
75.02
60.241
MAC21
1152 x 870@75Hz
75.061
68.681
59.87
47.776
1280 x 768
74.893
60.289
84.837
68.633
WXGA_60
WXGA_75
WXGA_85
65.317
WXGA_60
1280 x 720
60
45
WXGA_60
1280 x 800
59.81
49.702
WXGA_120-RB
1280 x 800
119.909
101.563
55.935
WXGA+_60
1440 x 900
59.887
1680x1050_60
1680 x 1050
59.954
65.29
acer_16:9
1366 x 768
59.79
47.712
1920 x 1080_RB
1920 x1080
60
66.587
1920 x 1080_EIA
1920 x1080
60
67.5
acer_timing
1024 x 600
60
37.5
1920 x 1200-RB
1920 x 1200
59.95
74.038
HDMI - Video Signal
Mode
Resolution
720 x 480
(1440 x 480)
V.Frequency [Hz]
H.Frequency [KHz]
60
15.73
480p
720 x 480
60
31.47
576i
720 x 576
(1440 x 576)
50
15.63
480i
576p
720 x 576
50
31.25
720p
1280 x 720
60
45.00
720p
1280 x 720
50
37.50
1080i
1920 x 1080
60
33.75
1080i
1920 x 1080
50
28.13
1080p
1920 x 1080
60
67.50
1080p
1920 x 1080
50
56.26
1080p
1920 x 1080
24
27.00
1080p
1920 x 1080
23.98
26.97
English
SXGA+_60
English
56
MHL - Video Signal
Mode
Resolution
720 x 480
(1440 x 480)
V.Frequency [Hz]
H.Frequency [KHz]
60
15.73
480p
720 x 480
60
31.47
576i
720 x 576
(1440 x 576)
50
15.63
576p
720 x 576
50
31.25
720p
1280 x 720
60
45.00
720p
1280 x 720
50
37.50
1080i
1920 x 1080
60
33.75
480i
1080i
1920 x 1080
50
28.13
1080p
1920 x 1080
24
27.00
1080p
1920 x 1080
23.98
26.97
1080p
1920 x 1080
30
33.75
Resolution
720 x 480
720 x 480
720 x 576
720 x 576
1280 x 720
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
V.Frequency [Hz]
59.94
59.94
50.00
50.00
60.00
50.00
60.00
50.00
60.00
50.00
24.00
23.98
H.Frequency [KHz]
15.73
31.47
15.63
31.25
45.00
37.50
33.75
28.13
67.5
56.26
27.00
26.97
H.Frequency [KHz]
60
50
50
60
50
60
60
fsc (MHz)
3.58
4.43
4.25 or 4.41
3.58
3.58
4.43
4.43
YPbPr Signal
Mode
480i
480p
576i
576p
720p
720p
1080i
1080i
1080p
1080p
1080p
1080p
Video, S-Video Signal
Mode
NTSC
PAL
SECAM
PAL-M
PAL-N
PAL-60
NTSC4.43
V.Frequency [Hz]
15.73
15.63
15.63
15.73
15.63
15.73
15.73
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
English
Regulations and safety notices
English
57
English
58
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Declaration of Conformity for EU countries
Acer hereby, declares that this projector series is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules).
Canada — Low-power license-exempt radio
communication devices (RSS-210)
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact a local office in the country of use.
Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
FCC RF Radiation Exposure Statement
1. This Transmitter must not be co‐located or operating in
conjunction with any other antenna or transmitter. 2. This
equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance
of 20 centimeters between the radiator and your body.
English
List of applicable countries
English
59
English
60
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi
New Taipei City 221, Taiwan
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan
Contact Person: Mr. RU Jan, e-mail:ru_jan@acer.com.tw
And,
Acer Italy s.r.l
Via Lepetit, 40, 20020 Lainate (MI) Italy
Tel: +39-02-939-921, Fax: +39-02 9399-2913
www.acer.it
Declare under our own responsibility that the product:
Product:
DLP Projector
Trade Name:
Acer
Model Number:
X1185/X1285/S1285/ P1185/P1285/P1385W/X1385WH/H6518BD/E341D/HE-813J/H1P1418
series
To which this declaration refers conforms to the relevant standard or other standardizing documents:
EN55022:2010 Class B; EN 55024:2010
EN61000-3-2:2006+A1:2009+A2:2009, Class A
EN61000-3-3:2008
EN 60950-1:2006/A11:2009/A1:2010+A12:2011
Regulation (EC) No. 1275/ 2008; EN 62301:2005
EN50581:2012
•
•
•
•
•
•
We hereby declare above product is in compliance with the essential requirements and other relevant
provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and RoHS Directive 2011/
65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign
requirements for energy-related product.
Year to begin affixing CE marking 2015.
RU Jan/Sr. Manager
Regulation Center, Acer Inc.
Jan. 26, 2015 Date
www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:
Product:
DLP Projector
Model Number:
QSV1407/QSV1502/QNX1408/
QNX1501/QNX1419/QSV1410/
QNX1411/QWX1413/QWX1409/
H1P1418 series
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party:
333 West San Carlos St.
Suite 1500
San Jose, CA 95110
U. S. A.
Contact Person:
Acer Representative
Phone No.:
254-298-4000
Fax No.:
254-298-4147
English
Acer America Corporation
333 West San Carlos St.,
Suite 1500
San Jose, CA 95110
U. S. A.
Tel: 254-298-4000
Fax: 254-298-4147
English
61
Congratulations!
This product is TCO Certified
for Sustainable IT
TCO Certified is an international third party sustainability certification for
IT products. TCO Certified ensures that the manufacture, use and
recycling of IT products reflect environmental, social and economic
responsibility. Every TCO Certified product model is verified by an
accredited independent test laboratory.
This product has been verified to meet all the criteria in TCO Certified, including:
Corporate Social Responsibility
Socially responsible production - working conditions and labor law in manufacturing country
Energy Efficiency
Energy efficiency of product and power supply. Energy Star compliant, where applicable
Environmental Management System
Manufacturer must be certified according to either ISO 14001 or EMAS
Minimization of Hazardous Substances
Limits on cadmium, mercury, lead & hexavalent chromium including requirements for mercury-free
products, halogenated substances and hazardous flame retardants
Design for Recycling
Coding of plastics for easy recycling. Limit on the number of different plastics used.
Product Lifetime, Product Take Back
Minimum one-year product warranty. Minimum three-year availability of spare parts. Product takeback
Packaging
Limits on hazardous substances in product packaging. Packaging prepared for recycling
Ergonomic, User-centered design
Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets)
Acoustic performance protection against sound spikes (headsets) and fan noise (projectors, computers)
Ergonomically designed keyboard (notebooks)
Electrical Safety, minimal electro-magnetic Emissions
Third Party Testing
All certified product models have been tested in an independent, accredited laboratory.
A detailed criteria set is available for download at www.tcodevelopment.com, where you can also
find a searchable database of all TCO Certified IT products.
TCO Development, the organization behind TCO Certified, has been an international driver in the
field of Sustainable IT for 20 years. Criteria in TCO Certified are developed in collaboration with
scientists, experts, users and manufacturers. Organizations around the world rely on TCO Certified
as a tool to help them reach their sustainable IT goals. We are owned by TCO, a non-profit
organization representing office workers. TCO Development is headquartered in Stockholm,
Sweden, with regional presence in North America and Asia.
For more information, please visit
www.tcodevelopment.com
Only P1285/X1285/P1385W/X1385WH is TCO Certified.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : FrameMaker 7.2
Modify Date                     : 2015:05:25 18:06:57+08:00
Create Date                     : 2015:04:01 08:53:21Z
Metadata Date                   : 2015:05:25 18:06:57+08:00
Format                          : application/pdf
Title                           : 
Creator                         : 
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:e239018b-5ff4-4e49-8760-c935c5a571b7
Instance ID                     : uuid:ffc71fe0-2f5f-42bd-a780-01dbc7f9340f
Has XFA                         : No
Page Count                      : 72
Page Layout                     : SinglePage
EXIF Metadata provided by
EXIF.tools
FCC ID Filing: HLZQBT1

Navigation menu