Acer orporated TMDMA100 TABLET COMPUTER User Manual Acer VanGogh UM EN
Acer Incorporated TABLET COMPUTER Acer VanGogh UM EN
Contents
- 1. Users Manual
- 2. Users Manual 1
- 3. Users Manual 2
Users Manual 2
Note: The Acer clear.fi video player only plays MP4 files. Please check for updates to the tablet's software which may add support for other types of video. See “Updating your tablet’s operating system” on page 55. To send video files, for example, to paired devices using Bluetooth or to YouTube, tap and hold a photo thumbnail, then tap Share. clear.fi music Tap a folder to list the audio files. Tap and hold a folder or audio file to view the menu panel. You can listen to any audio file found on any of the connected devices and save them. Tap and hold an audio thumbnail, then tap and hold any of the connected device showing an arrow. Select Play or Save. To send audio files as an email attachment using Google Mail, or to paired devices using Bluetooth, tap and hold a photo thumbnail, then tap Share. 38 nemoPlayer Open nemoPlayer from the application menu to play media you have stored on your tablet. nemoPlayer enables you to listen to music, view video clips and pictures in all the formats supported by your tablet. See “Multimedia” on page 59. Media server Your tablet can act as a digital media server using UPnP technology. This means that you can use it to send media content to other UPnP-enabled home entertainment devices that are connected to a home wireless network. To set up the media server, open the application menu and tap Media server. You will need to enable Share contents before you can start using the service. You may select to share Video, Photo or Music. Tap a category to control which files are shared. Dolby Mobile To access Dolby Mobile settings go to the application menu and tap Settings > Dolby Mobile. Here you can switch Dolby Mobile on or off, set Treble, Natural Bass, Music EQ and Video EQ. Media server 39 Managing Contacts Your tablet features an address book that allows you to save contacts to the internal memory or your Google account. Tap Contacts from the application menu to view your contacts. If you don’t have any contacts stored on your tablet, you can sync with your Google account contacts, import contacts from a contact data file (vCard or csv) or add a new contact. . If you have activated a Google account that includes contacts, your contacts will be synchronised automatically. See “Synchronization” on page 53. Importing contacts Tap the Menu button and select Import/Export. Tap the option that describes where you contacts are stored. When the contacts are found, confirm to import the contacts in a new group. Adding a new contact Tap New to add a new contact. You will be asked which account you want to use to store the contact. If you select the name of your tablet it will be stored in the tablet’s internal memory, and not synchonised with other accounts. 40 You may now edit the new contact entry. Editing a contact If you have opened an new or existing contact you can enter information about the contact: Simply tap on a box and type the appropriate information. Click on the arrow next to the name entry to see options, such as adding a name prefix or phonetic name. To enter multiple entries, such as separate entries for mobile and home phone numbers, tap the plus sign to create a second entry. Tap the minus sign to remove an entry. Tap Add another field for more categories. To assign an image to your contact, tap the silhouette and select an images from your tablet’s picture gallery (select Gallery if requested). You may also take and crop a new photo. Tap Done to finish and save the contact. Tip: Set each phone number to match the type of network as this can determine some functions. I.e. certain applications only recognise ‘Mobile’ numbers as they require a function only available on a mobile network. Opening a contact To see the information stored for a contact, tap on the contact’s name in the list on the left. 41 Tap on an entry (such as an email address) to open the application linked to that type of entry. For example, tap an email address to open the Gmail application. To add or change information, tap the pencil icon. Tap Done to save changes, or Cancel to discard them. Starred contacts You may quickly access your favorite contacts by adding a star. First open the contact, then tap the star next to the contact’s name. Tap All contacts and select Starred to see only your favorite contacts. Editing a contact on your computer If you have synchronised your Google account and contacts, you can use your computer to access and edit your contact list. Open the Internet browser on your computer and go to mail.google.com. Sign in to your account and click Contacts. Select and edit contacts from the list; the next time your tablet synchronizes with your computer, these changes will also be made to your tablet’s contact list. Warning: Backup your contacts before making any changes. Tap the Menu button and select Import/Export. You may then Export your contact list to the internal memory in your tablet, or other options depending on installed applications. 42 Using the Camera Your tablet features two cameras: a 5-megapixel digital camera and flash mounted on the rear and a 2-megapixel digital camera mounted on the front. This section will take you through all the steps in taking photos and videos with your tablet. Note: It is recommended that you insert a microSD card into the microSD slot before using the camera. Please note you can only save photos and videos to internal memory or a microSD card, not an external USB storage device. Tip: The recommended use for the front-facing camera is for video chat. Use the camera so the person you call can see you while you can see them on the screen. Normally, the video chat software you are using will provide controls for switching between the front and rear facing cameras. To activate the camera, open the application menu and tap Camera. Camera icons and indicators Note: Not all controls are available when using the front-facing camera. In the camera window, the controls on the right allow you to zoom, change settings, switch between internal and SD card memory, switch between the front and rear camera, or select camera or camcorder. After you have taken a photo, a thumbnail in the bottom-left allows you to view the gallery of pictures or videos. Camera icons and indicators 43 Icon Description Zoom out You may only zoom out after you have zoomed in. Zoom in Crop and enlarge the center of the screen. When using zoom, the image on the screen does not represent the quality of the final image. Take photo After taking a photo, tap the thumbnail in the bottom-left corner to view the photo in the Gallery. Flash mode Choose when to use the flash: Auto, On or Off White balance Change the color balance to match the lighting: Auto, Incandescent, Daylight or Fluorescent. Color effect Choose an effect to change the colors in your photos: None, Mono, Sepia, Negative, Solarize or Posterize. Scene mode Choose a mode to match the type of scene to capture: Auto, Action, Portrait, Landscape, Night, Night portrait, Theatre, Beach, Snow, Sunset, Steady photo, Fireworks. Camera settings Activate or change special settings: Store location, Focus mode, Exposure, Picture size, Picture quality, Restore defaults. Switch camera. Switch between the rear and front cameras. Switches to the camcorder (video recorder). Switches to the camera. Internal memory Saves photos to the tablet’s internal memory (this is the default). Memory card Saves photos to the memory card in the micro SD card slot (only available if a micro SD card has been inserted). Taking a photo 1. Ensure you the options described above are set to your preferences. 2. Frame your subject and steady your tablet. 44 3. Zoom in or out as needed. Note: When using zoom, the image on the screen does not represent the quality of the final image. 4. Tap the camera icon to take the photo. After taking a photo, tap the thumbnail in the bottom-left corner to view the photo in the Gallery. Shooting a video Note: Not all controls are available when using the front-facing camera. Tap the camcorder icon to switch to camcorder mode. Most camcorder settings are the same as the camera settings; if a setting is not described below, then check the camera description. Icon Description Start / stop recording Flash mode Choose if the flash should be on: On or Off Video quality Choose the quality (resolution) of the video: High, Low, YouTube. Note: YouTube uses the High quality setting, but is limited to 15 minutes. Time lapse interval Shoot a slow motion ‘time lapse’ video, set the interval between single frames in this menu. 1. 2. 3. 4. Ensure you the options described above are set to your preferences. Frame your subject and steady your tablet and zoom in or out as needed. Press the camera button down fully to begin recording. Press the camera button down fully to stop recording. Shooting a video 45 Note: Zoom is only available in certain resolutions. Supported formats Type Formats Image JPEG Video H.264BP Audio AAC-LC Viewing photos and videos After you have taken your photo or video, it is automatically saved; normally to internal memory. After taking a photo or video, you can view it in the Gallery by tapping the thumbnail in the bottom-left corner of the screen. Alternatively, open the application menu and tap Gallery, then Camera. Select the photo or video you want to view (videos are marked with a small play symbol). From the Gallery you can share the file directly using various services. Tap Menu and then Share. Note: Share options vary depending on the file type. 46 Reading an eBook Your tablet provides several ways to read an eBook. Open the eReading library to see the applications that have been pre-installed. LumiRead The LumiRead application allows you to purchase, store and read books on your tablet. Tap the LumiRead shortcut in the Application menu, or eReading library, to open the LumiRead application. The bookshelves The contents of your tablet are shown on the screen as a series of bookshelves. Each book is shown as an image with a name; this image is either defined by the book or a generic book cover. To change the book cover, tap and hold the book to see more information. If you have many books, you can swipe the screen up or down to display more titles. Note: Connect your tablet to a computer and add books to the lumibooks folder on your tablet’s internal memory or micro SD card to see them on the LumiRead bookshelves. Recently read The first shelf (at the top) displays books you have recently read. This list will change to reflect your activity. Favorites / tags As you add books to your tablet, you may find it difficult to find the book you need. You may either search for a specific title or author, add books to your Favorites, or choose only to display books with a certain tag, to reduce the number of books displayed at one time. LumiRead 47 Normally All books are displayed, but you can select a tag. If a tag has been selected, only books with that tag will be displayed. Available tags are: All, Favorites, Fiction, Romance, Fantasy, Crime, Historical, Horror, Business, Life, Outdoor, Science. Tap the Settings icon and select Tags to edit or create new tags. Dictionary The Dictionary allows you to check the definitions of words. Open the dictionary and type the word you want to check, then select Search Dictionary. A definition of the word is displayed at the top of the screen. Reading eBooks on your tablet Your tablet is able to ePub and pdf books. Most eBook sites provide files in these formats. Warning: Certain vendors may use copyright protection systems that cannot be opened by your tablet. Please check which DRM (Digital Rights Management) system is used. LumiRead supports books protected with Adobe ID. In order to read certain books, you must activate your tablet with an Adobe ID. See “Your Adobe ID” on page 49. Opening a book All books stored on your tablet may be seen on the shelves on the main screen. If you have many books, swipe the bookshelves up to see them. Simply tap a book to open it. Reading a book Simply swipe across a page to change the page. More options, such as searching the book, changing text size or marking sections for future reference are available in the tool bar. The text size will change as you move the selection left or right. After choosing a size, tap the Close button and continue reading the book. Tool bar The tool bar is at the top of the screen. This area displays icons that allow you to look for new books or change how books are displayed. 48 Icon Item Description Shopping cart Open the Bookstore page, where you can choose where to purchase books. Search Search the Internet or your books for text. Sort by Change how books are organized on the bookshelves. Display Change how the books are shown. Settings Open settings to Register an Adobe ID, change the theme or edit tags. Shopping Tap the shopping cart and select your region to see a featured bookstore. On the right, additional bookstores are listed, tap the plus sign add links to your favorite sites. Note: You must create a customer account before purchasing items from the featured bookstore. Your Adobe ID Some books available for purchase are protected with Adobe DRM (Digital Rights Management). Before you can read them, you must enter an Adobe ID to activate your tablet. Only one activation is required, as it covers all purchases. If you already have an Adobe ID, you may use this to activate your tablet. To create an Adobe ID: 1. Open LumiRead. LumiRead 49 2. 3. 4. 5. Tap the Settings button. Tap Register Adobe ID. Tap Create an Adobe Account. Enter the information requested to create login information for your account. Note: The email adress you enter will be your Adobe ID. Make sure you remember your password. 6. Select Continue. Your Adobe ID is now registered. Entering your Adobe ID To register your tablet, follow these steps: 1. Open LumiRead. 2. Tap the Settings button 3. Select Device activation. 4. Enter the email address and password used to create your Adobe ID. 5. Finally tap Activate. You may now read books protected with Adobe DRM. 50 Advanced Settings Access Settings from the Application menu. Tap Apps, then Settings. Sound Adjust the volume of your tablet using the volume buttons on the side of the tablet. Alternatively, you can adjust your tablet sound settings by tapping Apps > Settings > Sound. Item Description Vibrate Sets vibration options. Volume Sets volume for Media, Alarm, and Notifications. Notification ringtone Sets a ringtone for notifications. Audible selection Plays a sound whenever a screen selection is made. Screen lock sounds Plays a sound when locking and unlocking the screen. Haptic feedback Vibrates when pressing soft keys and on certain UI interactions. Screen You can adjust your tablet screen settings by tapping Apps > Settings > Screen. Item Description Brightness Adjust screen brightness. Animation Enable window animations. Timeout Set a delay before the screen will be turned off. Sound 51 Putting your tablet in Airplane mode You can enter Airplane mode (also known as flight mode) to turn off network and Bluetooth functions and use your tablet during a flight. Check with your airline to make sure this is permitted onboard. Switch your tablet off during takeoff and landing as it may interfere with aircraft electronic systems. Note: When Airplane mode is active, the area. icon is displayed in the status Turn Airplane mode on or off by tapping Settings > Wireless & Networks > Airplane mode. Activating or deactivating connections Open the Application menu and tap Apps > Settings > Wireless & networks to manage your connection settings. Each connection will have a green check when turned on. Alternatively, you can tap on the right side of the status bar to manage connection settings. Adjusting connection settings This section will show you how to adjust detailed settings for your data, Wi-Fi and Bluetooth connections. Item Description Airplane mode Disables all wireless connections so you can safely use this device onboard an aircraft. Wi-Fi Turns the Wi-Fi function on or off. Wi-Fi settings Sets up and manages your wireless access points. Bluetooth Turns the Bluetooth function on or off. Bluetooth settings Manages your Bluetooth connections, sets a device name and discoverability. VPN settings Sets up and manages Virtual Private Networks. Adjusting Bluetooth settings You can use Bluetooth to exchange information between your tablet and other mobile devices. Bluetooth connections For all Bluetooth settings, tap Apps > Settings > Wireless & networks > Bluetooth settings. Here you can switch Bluetooth on or off, set a device name and discoverability. Tap Find nearby devices to scan for available devices. 52 To connect to a device, tap the device in the list of available devices. You may be asked to enter a PIN on both devices to establish the connection. Note: Only A2DP stereo headsets (without microphone) are supported. Please check for updates to the tablet's software which may add support for additional Bluetooth devices. Connecting to a PC If you wish to transfer information between your tablet and your computer, you can connect your tablet to a PC using the supplied USB cable. Plug the USB sync cable into the micro USB connector on your tablet. Plug the USB client connector into an available USB port on your computer. Note: You may need to install drivers on your computer before your tablet can be used with your computer. You will now be able to see your tablet’s internal memory as a drive in your computer’s file explorer. Synchronization You can configure synchronization options for many applications on your tablet. You can also configure what types of data you synchronize for each account. Some applications, such as Contacts, Gmail, and Calendar, can sync data from multiple accounts. Others sync data only from the first Google Account you sign into on your tablet, or from an account associated specifically with that application. For some applications, such as Contacts or Calendar, all changes that you make on your tablet are made to the synchronised copy on the Internet. Other applications only copy information from account on the Internet; the information on your tablet cannot be changed directly, you must change the information stored in the Internet account. Tap Apps > Settings > Accounts & sync to access the synchronization settings. To manage synchronization of individual accounts, tap an account name. Some applications, such as Gmail and Calendar, have their own synchronization settings. Open the application and tap the Menu button (four bars) and then tap Accounts. Auto-sync To have your tablet auto-sync, make sure Background data and Auto-sync are enabled. • If Background data is enabled, applications can transmit and receive data when you are not using them. Connecting to a PC 53 • If Auto-sync is enabled, all changes are automatically transferred between your tablet and Internet accounts. Acer Sync Acer Sync allows you to easily synchronize your contacts, calendar, photos and videos between your tablet, PC and corresponding Google services. You must install the Acer Sync program on your computer; download and install Acer Sync and Acer PIM for the PC from the mobile.acer.com website. Multiple Google accounts If you have multiple Google accounts, such as separate accounts for personal and business contacts, you can access and synchonize them from the Accounts settings section. Tap Apps > Settings > Accounts & sync. Tap Add account in the top-right corner and select Google. Setting the date and time To set the date and time, tap Apps > Settings > Date & time. Tip: If you travel frequently or live in an area that uses daylight saving time, and have mobile network access, activate Automatic date & time from this menu. Your tablet will set the date and time based on information it receives from the network. Setting alarms There are two predefined alarms on your tablet by default. To add or edit alarm settings, tap Clock in the application menu and tap Set alarm. Tap Add alarm to create a new alarm, or tap the check box next to a preset alarm to turn it on or off. Tap a preset alarm to edit it. You can: • • • • • • Turn the alarm on or off. Set the alarm time. Set which days to repeat the alarm. Set a ringtone. Enable or disable vibrate. Give it a label (i.e. a name). Changing language and text options Set your location and language input preferences by opening the application menu and going to Apps > Settings > Language & input. Managing applications You can allow programs from Unknown sources to be installed and Manage applications. 54 Closing an application To close an active application, go to Settings > Applications > Manage applications. Tap the Running tab, then tap the program you wish to close. Select Force stop to close the program. Uninstalling an application You can remove programs installed on your tablet to free up extra storage memory. Tap and hold a program icon from the application menu and drag it into the Uninstall area in the top-right corner. Note: You cannot uninstall applications that were pre-loaded on your tablet. Alternatively, you can go to Apps > Settings and select Applications > Manage applications. Tap the application you wish to uninstall, tap Uninstall and confirm the uninstall. Warning! You should only remove programs if you are familiar with the Android operating system. Updating your tablet’s operating system Your tablet can download and install system updates, adding support for new devices or expanding software options. To check for updates, tap Apps > Settings > About tablet > System update > Check now. Note: Downloading new firmware can take up to 40 minutes, depending on your network speed. Resetting your tablet You may have to perform a reset if your tablet fails to respond when buttons are pressed or the screen is tapped. To reset your tablet use a small thin object (such as a paperclip) to press the recessed reset button. See “Bottom view” on page 11. Clean boot A clean boot will restore your tablet to the factory settings. Warning! This will erase all your personal information, any contacts stored on your tablet and any programs you installed. Updating your tablet’s operating system 55 Open Settings from the application menu, then tap Privacy > Factory data reset; click Reset tablet and then Erase everything to format your tablet. If your tablet still does not respond, refer to “FAQ and troubleshooting” on page 57. 56 Appendix FAQ and troubleshooting This section lists frequently asked questions that may arise during the use of your tablet, and gives easy answers and solutions to these questions. Aspect Question Answer Audio Why is there no sound coming from the device? If the headset is plugged into the device, the speaker is automatically shut off. Disconnect the headset. Check that the device volume setting is not muted. Check that the volume control is not at its lowest setting. Multimedia files Why can’t I view my You may be trying to view an image picture files? that is not supported. Refer to “Multimedia” on page 59 for more information. Why can’t I view my You may be trying to view a video that video files? is not supported. Refer to “Multimedia” on page 59 for more information. Why can’t I play my music files? You may be trying to play a file that is not supported. Refer to “Multimedia” on page 59 for more information. System information and performance How do I check the OS version of my device? Tap Apps > Settings > About tablet to check the OS version (Kernel/build number) and other hardware and software information. Power I couldn’t turn on the device. The battery power may be depleted. Recharge the device. Refer to “Charging your tablet” on page 12 for more information. Storage How do I check memory status? To check storage status, go to Settings > Storage. FAQ and troubleshooting 57 Aspect Question Answer Unlock pattern I forgot my unlock pattern. After a certain number of wrong entries, you will be presented with an option to reset your pattern. Tap Forgot pattern? and enter your google account username and password. Note: You must have an active Google account on the tablet. Alternatively, you can clean boot the tablet and erase all data. See “Clean boot“ on page 55. Heat The tablet heats up when charging or operating for a long period. It is normal for the device to heat up when charging. When charging is complete, it will return to its normal temperature. It is also normal for the tablet to heat up during long periods of use, such as watching a video or playing a game. All Acer tablets are factory tested before release. Other sources of help For information on: Refer to: Up-to-date information regarding your tablet www.acer.com Service enquiries www.acer.com/support 58 mobile.acer.com Specifications Performance • NVIDIA® Tegra™ 250 dual-core Cortex-A9, 1 GHz • Ultra-low power GeForce® GPU • System memory: • 1 GB of RAM • 8 or 16 GB of flash memory • Google Android™ operating system Display • 7” WSVGA TFT-LCD capacitive multi-touch screen • 1024 x 600 resolution • 262K colors support Multimedia • • • • • Micro (Type D) HDMI output CD-quality stereo output Stereo speakers Dual microphone with noise and echo cancellation Dolby Mobile Formats supported: Type Formats Audio recording AAC-LC, AMR-WB Audio playback AAC-LC, AAC, AAC+ (Not raw AAC), AMR-NB, AMR-WB, MP3, OGG Vorbis, WAV Video recording H.264 BP, MPEG-4 SP, H.263 Video playback H.264 BP, H.264 MP, H.264 HP, MPEG-4 SP, H.263 USB connectors • Micro USB connector (slave) Power • DC power-in (12 V, 1.5 A) Connectivity • Bluetooth 2.1+EDR & A2DP support • Wi-Fi 802.11b/g/n WLAN • GPS Camera • 2-megapixel front camera (fixed focus) • 5-megapixel rear camera with flash (auto focus) Specifications 59 Expansion • microSD memory card slot (up to 32 GB) Battery • Rechargeable high density Li-polymer batteries: 1530 mAh x 2 (11.3 Wh) Note: Length of battery operation will depend on power consumption which is based on system resource use. For example, constantly using the backlight or using power-demanding applications will shorten battery life between charges. Dimensions Height 195 mm Width 117 mm Thickness 13.1 mm Weight 405 g (with battery) 60 Safety Prevention of hearing loss Caution: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time. This device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable EN 50332-1 and/or EN 50332-2 standards. Note: For France, mobile headphones or earphones for this device have been tested to comply with the Sound Pressure requirement laid down in the applicable NF EN 50332-1:2000 and/or NF EN 50332-2:2003 standards as required by French Article L. 5232-1. A pleine puissance, l’écoute prolongée du baladeur peut endommager l’oreille de l’utilisateur. CAUTION when listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level after your ears have adjusted. • Do not listen to music at high volumes for extended periods. • Do not increase the volume to block out noisy surroundings. • Decrease the volume if you can’t hear people speaking near you. Radio Frequency Interference Warning! For safety reasons, turn off all wireless or radio transmitting devices when using your device under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G. Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. To successfully transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure that the above separation distance instructions are followed until the transmission is completed. Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with hearing aids should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. Safety 61 Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF transmissions. Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3 cm (6") be maintained between wireless devices and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following: • Always keep the device more than 15.3 cm (6") from the pacemaker. • Not carry the device near your pacemaker when the device is switched on. If you suspect interference, switch off your device, and move it. Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling 62 points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmospheres are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders. Follow any restrictions. Do not use the device where blasting is in progress. Emergency calls (only for models supporting phone function) Important: Wireless products, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. Operation environment Make sure that the device: • • • • • • • • • • Is away from magnetic fields or any device generating static electricity. Is kept at least 30 centimetres (one foot) away from a mobile phone. Is not in a dusty or damp environment. Is not used near water. Never spill liquids of any kind on or into your device. Cables are not strained and that there is no risk of people walking or tripping over them. Other devices do not crush the cables. Always unplug your device from the power outlet before cleaning it. Do not use liquid or aerosol cleaners, use a damp cloth instead. Never spray cleaning product directly on the screen. If you spill liquid on your device, switch it off immediately, unplug the AC adapter. Do not attempt to service your device yourself, as opening or removing covers may expose you to dangerous voltage or other risks. Refer all servicing to qualified service personnel. Unplug your device from the wall outlet and refer servicing to qualified service personnel when: Safety 63 • • • • • the power cord or plug is damaged, cut or frayed, liquid was spilled into the product, the product was exposed to rain or water, the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Battery information This product uses a Lithium-ion / Li-polymer battery. Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight, in a microwave oven or in a pressurized container, and do not expose it to temperatures over 60 °C (140 °F). Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will not occur at low (below 0 °C/32 °F) or high (over 40 °C/104 °F) temperatures. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged many times, but it will eventually wear out. When normal use and standby times are noticeably shorter than normal, contact your reseller. Use only Acer approved batteries, and recharge your battery only with Acer approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before the device can be used. Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Do not short-circuit the batteries under any condition. Accidental shortcircuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery or any device with embedded batteries in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15 64 °C and 25 °C (59 °F and 77 °F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of battery or devices with embedded batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. • Avoid leaving this device or battery in your car in high temperatures. • Avoid dropping this device or battery. It can cause damage. • Contact your service provider or reseller to have them checked if this device or battery get wet or damaged from dropping or high temperature. Replace battery: Use original products for quality assurance and safeguards. Battery cannot be removed and replaced, contact your reseller if performance of battery shall be checked. Warning: Use of a non-original battery or charger may present a risk of fire, explosion, leakage, or other hazard. Warning! Batteries may explode if not handled properly. Do not disassemble or dispose of them in fire. Keep them away from children. Follow local regulations when disposing of used batteries. Driving safety Using this device while driving may cause distraction. Stop using it if you can’t concentrate on driving. Input information about your destination and route prior to your drive. Do not input data or engage in text messaging while driving. Keep your eyes on the road while driving. Listen to the audible turn-byturn directions, if available. Also, using a mobile device or accessory may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. GPS & AGPS (for certain models only) • Your device may use Global Positioning System (GPS) signals for location-based applications. GPS uses satellites controlled by the U.S. government that are subject to changes implemented in accordance with the Department of Defense policy and the Federal Radio Navigation Plan. These changes may affect the performance of location technology on your device. • Your device may also use Assisted Global Positioning System (AGPS), which obtains information from a cellular network to improve GPS performance. AGPS uses your wireless service provider’s network and therefore airtime, data charges, and/or additional charges may apply in accordance with your service plan. Contact your wireless service provider for details. Safety 65 • Device enabled with GPS or AGPS technology transmit location-based information. This location-based information may be shared with third parties, including your wireless service provider, application providers, and other third parties providing service. Emergency calls • When you make an emergency call, the cellular network may activate the AGPS technology in your mobile device to tell the emergency responders your approximate location. • AGPS has limitations and might not work in your area. Therefore: • Always tell the emergency responder your location to the best of your ability, and • Remain on the device for as long as the emergency responder instructs you. • Get better performance by going outside and away from underground locations, covered vehicles, structures with metal or concrete roots, tall buildings, and foliage. • Indoor performance might improve if move closer to windows, but some windows sun shielding films can block satellite signals. • Get better performance by moving away from radios, entertainment equipment, and other electronic devices. Keep away from children • Keep your device & its accessories away from small children, a chocking hazard may exist for small, detachable parts. • Improper use may cause load sounds, possibly causing hearing injury. • Improperly handled this device or batteries could overheat and cause a burn. Glass parts Some of parts of your device may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your device until the glass is replaced by a qualified service center. Seizures/Blackouts/Eyestrain A small percentage of people may be susceptible to blackouts or seizures (even if they have never had one before) when exposed to flashing lights or light patterns such as when playing games or watching video. If you have experienced seizures or blackouts or have a family history of such occurrences, you should consult a physician before playing games or watching videos on your device. Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the light on in the room, take a not-lessthan-15-minute break every hour, and stop use it if you are tired. Repetitive motion When you repetitively perform actions such as pressing keys or entering fingerwritten characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician. 66 Use of connectors and ports Never force a connector into a port. Check for obstructions on the port. If the connector and port don’t join with reasonable ease, they probably don’t match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port. Information from World Health Organization Present scientific information does not indicate the need for any special precautions for the use of mobile device. If you are concerned, you may want to limit your own or your children’s RF exposure by limiting the length of calls or by using handsfree devices to keep mobile devices away from your head and body. Source: WHO Fact Sheet 193 Further information: http://www.who.int/peh-emf Consumer information on wireless device The U.S. Food and Drug Administration (FDA) has published a series of Questions and Answer for consumers relating to radio frequency (RF) exposure from wireless phone devices: http://www.fda.gov/Radiation-EmittingProducts/ RadiationEmittingProductsandProcedures/HomeBusinessandEntertainment/ CellPhones/default.htm Additional information on the safety of RF exposures: FCC RF Safety program: http://www.fcc.gov/oet/rfsafety Environmental Protection Agency (EPA): http://www.epa.gov/radiation International Commission on Non-Ionizing Radiation Protection: http://www.icnirp.de Export Law Assurances This product, including any software or technical data contained in or accompanying the product, may be subject to import and export regulations of the European Union, the United States of America, Canada and other countries/ regions. The Government of those countries/regions may restrict the exportation or re-exportation of this product to certain destinations. For further information refer to European Council Regulation (EC) 1334/2000, contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade, and other local government authorities. Protection of personal information Erase personal data before disposing of the product. To delete data, perform a master reset. Deleting date from the device memory does not ensure that it cannot be recovered. Disposal and recycling information Do not throw this electronic device into the trash when discarding. Safety 67 To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit www.acer-group.com/ public/Sustainability/sustainability01.htm RoHS compliance This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments. Disposal of your device packaging & product guide should be in accordance with national collection and recycling requirements. Contact your regional authorities for more details. LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. Radio device regulatory notice Note: Regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configuration, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Information below is for products with such devices. Wireless operation channels for different domains N. America 2.412-2.462 GHz Ch01 through Ch11 Japan 2.412-2.484 GHz Ch01 through Ch14 Europe ETSI 2.412-2.472 GHz Ch01 through Ch13 This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. France: Restricted wireless frequency bands Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors is: • 10 mW for the entire 2.4 GHz band (2400 MHz - 2483.5 MHz) • 100 mW for frequencies between 2446.5 MHz and 2483.5 MHz 68 Note: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz. There are few possibilities for outdoor use: On private property or on the private property of public persons, use is subject to a preliminary authorization procedure by the Ministry of Defense, with maximum authorized power of 100 mW in the 2446.5 - 2483.5 MHz band. Use outdoors on public property is not permitted. In the departments listed below, for the entire 2.4 GHz band: • Maximum authorized power indoors is 100 mW • Maximum authorized power outdoors is 10 mW Departments in which the use of the 2400 - 2483.5 MHz band is permitted with an EIRP of less than 100 mW indoors and less than 10 mW outdoors: 25 Doubs 26 Drome 32 Gers 36 Indre 37 Indre et Loire 41 Loir et Cher 45 Loret 50 Manche 55 Meuse 58 Nievre 01 Ain Orientales 02 Aisne 03 Allier 05 Hautes Alpes 08 Ardennes 09 Ariege 11 Aude 12 Aveyron 16 Charente 24 Dordogne 75 Paris 82 Tarn et Garonne 84 Vaucluse 88 Vosges 89 Yonne 90 Territoire de Belfort 94 Val de Marne 59 Nord 60 Oise 61 Orne 63 Puy Du Dome 64 Pyrenees Atlantique 66 Pyrenees 67 Bas Rhin 68 Haut Rhin 70 Haute Saone 71 Saone et Loire This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr). Note: Your WLAN Card transmitts less than 100 mW, but more than 10 mW. List of National Codes This equipment may be operated in the following countries: Country Austria ISO 3166 2 letter code AT Country Germany Country ISO 3166 2 letter code Country DE Malta MT United Kingdom ISO 3166 2 letter code ISO 3166 2 letter code GB Belgium BE Greece GR Netherlands NT Iceland IS Cyprus CY Hungary HU Poland PL Liechtenstein LI Czech Republic CZ Ireland IE Portugal PT Norway NO Denmark DK Italy IT Slovakia SK Switzerland CH Estonia EE Latvia LV Slovenia SL Bulgaria BG Finland FI Lithuania LT Spain ES Romania RO France FR Luxembourg LU Sweden SE Turkey TR Safety 69 FCC regulations This mobile device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure warning The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter For Canadian users Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This Category II radiocommunication device complies with Industry Canada Standard RSS-310. Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310 d’Industrie Canada. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 70 (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en Regulatory information Compliant with Russian regulatory certification (for Russian) NCC 警語 經型式認證合格之低 率射頻電機,非經許可,公司 頻率 大 率或變更原設計之特性及 能 商號或使用者均不得擅自變更 低 率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應 立即停用,並改善至無干擾時方得繼續使用 前項合法通信,指依電信法規定作業之無線電通信 低 率射頻電機須忍受合法通信或工業 * 減少電磁波影響,請妥善使用 科學及醫療用電波輻射性電機設備之干擾 (* 僅限電話手機機種 ) Lithium-ion / Li-polymer battery warning ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente. VORSICHT! Explosionsgefahr bei unsachgemäßen Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hävitä käytetty paristo valmistagan ohjeiden mukaisesti. ATTENTION ! Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mêre type ou d’ un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. Safety 71 RF exposure information (SAR) This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Important: Body-worn measurements differ among device models, depending upon available enhancements and FCC requirements. While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirements. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid after searching on FCC ID: HLZTMDMA100. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with accessories that contain no metal and that position the device a minimum of 0 cm from the body when the device is switched on. Certificate Information (SAR) This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The limits are part of extensive recommendations for the protection of the general public. These recommendations have been developed and checked by independent scientific organizations through regular and thorough evaluations of scientific studies. To guarantee the safety of all persons, regardless of age and health, the limits include a significant safety buffer. Before radio devices can be put in circulation, their agreement with European laws or limits must be confirmed; only then may the CE symbol be applied. 72 The unit of measurement for the European Council's recommended limit for mobile devices is the "Specific Absorption Rate" (SAR). This SAR limit is 2.0 W/ kg, averaged over 10 g of body tissue. It meets the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP). The maximum SAR value is calculated at the highest output level in all frequency bands of the mobile device. For body worn operation, this device has been tested and meets the ICNIRP exposure guidelines and was included in the European Standard EN 62311 and EN 62209-2 for use with accessories that contain no metal and that position the device a minimum of 1.5 cm from the body when the device is switched on. Use of other accessories may not ensure compliance with ICNIRP exposure guidelines. During use, the actual SAR level is usually much lower than the maximum value, because the mobile device works in different output levels. It only transmits with as much output as is required to reach the network. In general the following applies: The closer you are to a base station, the lower the transmission output of your mobile device. Certification marks and Compliance Region Certification and Compliance Canada IC : 1754F-TMDMA100 E.U. U.S. FCC ID: HLZTMDMA100 You can view certification logos on your device: open Settings > About tablet > Legal information > Certification Logo. For Canadian users Important note IC radiation exposure statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528. This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Note: The country code selection feature is disabled for products marketed in the US/Canada. 73 0682 Acer Incorporated Date: March 2, 2011 Declaration of Conformity We, Acer Incorporated, of 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist, New Taipei City, 22181, Taiwan Declare under sole responsibility that the product: Model: A100 Description: Tablet Computer To which this declaration relates, is in conformity with the following standards and/or other normative documents: • EN 300 328 V1.7.1 • EN 300 440-1 V1.6.1 ; EN300 440-2 V1.4.1 • EN 301 489-1 V1.8.1 ; EN 301489-3 V1.4.1 ; EN 301489-17 V2.1.1 • EN 55022:2006/A1:2007 Class B ; EN 55024:1998/A1:2001/A2:2003 • EN 60950-1: 2006+A11:2009 • EN 50332-2: 2003 • EN62311:2008; EN62209-2:2010 We hereby declare that the above named product is in conformance to all the essential requirements of the R&TTE Directive (99/5/EC) issued by the Commission of the European Community. The conformity assessment procedure referred to in Article 10 and detailed in Annex [IV] of directive 1999/5/EC has been followed related to Articles: • R&TTE Article 3.1 (a) Health and Safety • R&TTE Article 3.1 (b) EMC • R&TTE Article 3.2 Spectrum Usage with the involvement of the following Notified Body: CETECOM, Untertuerkheimer Str. 6 – 10 66117 Saarbruecken Identification mark: 0682 (Notified Body) CE The technical documentation relevant to the above equipment will be held at: Acer Incorporated 8F., No. 88, Sec. 1, Xintai 5th Rd., Xizhi Dist, New Taipei City, 22181, Taiwan Authorized person: Name: Harriot SL Lee 74
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Author : SM83CPB17 Create Date : 2011:04:22 12:06:55Z Modify Date : 2011:05:25 20:44:26+08:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : Acer_VanGogh_UM_EN.book Creator : SM83CPB17 Creator Tool : FrameMaker 9.0 Metadata Date : 2011:05:25 20:44:26+08:00 Producer : Acrobat Distiller 9.4.0 (Windows) Document ID : uuid:b2c71f6c-489c-4684-8178-b3da823f1ffa Instance ID : uuid:f437cc60-38be-4d1b-8049-1b41f3179ec6 Page Mode : UseOutlines Page Count : 37EXIF Metadata provided by EXIF.tools