Acer 4270 Users Manual S.G_TM4670_4270_4210&AS5670_5620_BOOK

Acer Laptop 4270 travelmate 4210 4270 4670 aspire 5620 5670

4670 to the manual 915becdd-9111-4dc0-bae2-ea30f1726da0

2015-01-25

: Acer Acer-4270-Users-Manual-211133 acer-4270-users-manual-211133 acer pdf

Open the PDF directly: View PDF .
Page Count: 135

Download
Open PDF In Browser	View PDF

TravelMate4210/4270/4670&Aspire5620/5670
Service Guide

Service guide files and updates are available
on the AIPG/CSD web; for more information,
please refer to http://csd.acer.com.tw

PRINTED IN TAIWAN

Revision History
Please refer to the table below for the updates made on TravelMate4270/4670/4210 & Aspire5620/5670
service guide.

Date

Chapter

Updates

Copyright
Copyright © 2005 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in
any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without
the prior written permission of Acer Incorporated.

Disclaimer
The information in this guide is subject to change without notice.
Acer Incorporated makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranties of merchantability or fitness for any particular
purpose. Any Acer Incorporated software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not Acer Incorporated, its distributor, or its
dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential
damages resulting from any defect in the software.

Acer is a registered trademark of Acer Corporation.
Intel is a registered trademark of Intel Corporation.
Pentium 4 and Celeron are trademarks of Intel Corporation.
Other brand and product names are trademarks and/or registered trademarks of their respective holders.

Conventions
The following conventions are used in this manual:

Screen messages

Denotes actual messages that appear
on screen.

NOTE

Gives bits and pieces of additional
information related to the current
topic.

WARNING

Alerts you to any damage that might
result from doing or not doing specific
actions.

CAUTION

Gives precautionary measures to
avoid possible hardware or software
problems.

IMPORTANT

Reminds you to do specific actions
relevant to the accomplishment of
procedures.

Preface
Before using this information and the product it supports, please read the following general information.
1.

This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION
decided for Acer's "global" product offering. To better fit local market requirements and enhance product
competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g.
add-on card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be covered
in this generic service guide. In such cases, please contact your regional offices or the responsible
personnel/channel to provide you with further technical details.

Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date information
available on your regional web or channel. If, for whatever reason, a part number change is made, it will
not be noted in the printed Service Guide. For ACER-AUTHORIZED SERVICE PROVIDERS, your Acer
office may have a DIFFERENT part number code to those given in the FRU list of this printed Service
Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and
service of customer machines.

Chapter1 System Specifications ..............................................1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TM 4670/4270/4210 Outlook View . . . . . . . . . . . . . . . . . . . . . 5
Aspire 5670/5620 Outlook View . . . . . . . . . . . . . . . . . . . . . . 11
Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Easy-Launch Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Touchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using the System Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Acer Empowering Technology. . . . . . . . . . . . . . . . . . . . . . . . 28
Hardware Specifications and Configurations . . . . . . . . . . . . 38

Chapter2 System Utilities ..........................................................48
BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Advanced. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48
49
51
53
54
57
58

Chapter3 Machine Disassembly and Replacement ..........59
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Disassembly Procedure Flowchart . . . . . . . . . . . . . . . . . . . . 61
Removing the Adapter and Battery Pack . . . . . . . . . . . . . . . 63
Removing the TV Tuner, Heatsink Module, CPU, and HDD Module 64
Removing the Memory and Wireless Card . . . . . . . . . . . . . . 67
Removing the Bluetooth Module . . . . . . . . . . . . . . . . . . . . . . 68
Disassembling the Main Unit into Upper Case and Lower Case 69
Remove the Touchpad Board . . . . . . . . . . . . . . . . . . . . . . . . 72
Remove the Mainboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Disassembling the LCD Module . . . . . . . . . . . . . . . . . . . . . . 77
Reassembling the LCD Module . . . . . . . . . . . . . . . . . . . . . . 80
HDD disassembly & Reassembly . . . . . . . . . . . . . . . . . . . . . 82
ODD disassembly & Reassembly . . . . . . . . . . . . . . . . . . . . . 83
Main Unit Reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Chapter4 Troubleshooting .......................................................93
System Check Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Power-On Self-Test (POST) Error Message . . . . . . . . . . . . 97
Index of Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Phoenix BIOS Beep Codes . . . . . . . . . . . . . . . . . . . . . . . . . 100
Index of Symptom-to-FRU Error Message . . . . . . . . . . . . . 104
Intermittent Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Undetermined Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Chapter5 Jumper and Connector Locations ......................110

Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Bottom View . . . . . . . . . . . . . . . . . . . . 112

Chapter6 FRU (Field Replaceable Unit) List ......................113
Exploded Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Aspire 5670 Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Chapter 1

System Specifications
Features
This computer was designed with the user in mind. Here are just a few of its many features:

Performance
T

Intel® Pentium® M YonahProcessor dual core at 1.66~2.33 GHz or higher

Intel® Pentium® M Yonah Processor single core at 1.66~1.83 GHz higher

Intel® Celeron® M Yonah Processosr 430/420/410

North Bridge:

Chipset
T
T

915GM/915PM

South Bridge:
T

ICH7M-DH/ICH7M

Memory
T

256MB or 512MB of DDRII 533/667 SDRAM

Two DDR SODIMM slots

Upgradeable to 2GB Memory for 32bit OS, 4G for 64bit OS

15.4” TFT WXGA, WXGAG, WSXGA+

15” TFT XGA

Display

Graphics
T

UMA

Discrete
T

ATI MOBILITYTM RADEON® X1400(M54P), X1600(M56P)

ATI MOBILITYTM RADEON® X1300(M52P)

VRAM
T

UMA
T

Chapter 1

DVMT3.0, share 8MB, up to 128MB in OS

Discrete
T

M56P: 64MB/128MB/256MB

M54P: 64MB/128MB/256MB

M52P: 64MB/128MB/256MB

TV Tuner ( for Aspire only)
T

MiniPCI type

Reserve necessary thermal solution

3 TV tuner modules at lease
T

Analog w/ HW MPEG2

Analog+Digital w/ HS MPEG2(Hybrid)

Analog+Digital w/o HW MPEG2(Hybrid)

Location of the TV tuner card has to be very close to the connector

Worldwide version supoprt

Realtek ALC883 Audio Codec

HD(High Definition) AUdio

SNR > 85

Internal Microphone

Two speakers, at lease 1W/2.5cc for each

Enable VoIP function

PATA and SATA co-lay

9.5mm height, 2.5” HDD

Easily removable

60/80/100/120GB

PCI Bus Master Enhanced IDE

Support Ultra DMA100, S.M.A.R.T

Audio

Storage

Communication
T

56Kbps V.90/V.92 AC-Link modem card (MDC1.5)

10/100Mbps or Giga LAN on board

WLAN 802.11b/g or 802.11 a/b/g dual-band tri-mode Wireless with Mini-card/Mini-PCI interface

Built-in 2 Antenna (which has to be placed on the top of LCD on the sides of LCD latch)

I/O Ports

4 external USB 2.0 ports

IEEE 1394 port (4-pin)

Ethernet (RJ-45) port

Modem (RJ-11) port

External display (VGA) port(15-pin)

S-video port(7-pin)

Microphones-in/Line-in jack

Headphones/Speaker/Line-out jack with SPDIF support

Infrared (FIR) port

DC-in jack for AC adaptor
Chapter 1

1 PCMCIA

1 Express Card

1 CIR(for Aspire)

1 ezDock port

1 DVI-D

1 TV-in connector(for TV SKU)

1 7-pin miniDin connector(for TV SKU)

8-cell of 18650 Li-ion battery pack, (2400mAh)

4-cell of 18650 Li-lon battery pack, (2000mAh)

6-cell of 18650 Li-lon battery pack, (2000mAh)

3-pin 90W AC adaptor

Battery

Chapter 1

Block Diagram
5

ZB1 SYSTEM BLOCK DIAGRAM
DVI / 7307
Chrontel

Yonah/Merom 479
uFCPGA U44

X'TAL
14.318MHZ

P41

P3,P4

PCI-Express X 2

Docking
Connector

CPU
Thermal Sensor
P5
U64

TV out / CRT

with PCIE1~2 , Lan

Switch

TV in

,Ser & Par Port ,

Clock Generator
ICS954310BGLF
P2

TVOUT
P25

SPIF3811
U51

SATA0

P26

HDD Master
CN41
P35

CALISTOGA
945GM/PM
1466
FCBGA U43

533/667 Mhz

PCI-Express 16X Lan
LVDS
VGA/TV out

ATI
M52/54
U34

VRAM X 4
U30,33,6,10P23

PATA
USB 2.0

USB4

652 BGA
U49

P29

DDR2
16M X 16
32M X 16

Broadcom
5789/87/88
PCMCIA+1394
+Cardreader
Controller

Int MIC

P36

CCD

USB7

4401E 10/100
5705E GLAN

P29

Azalia Audio
Controller
ALC883 P36

Azalia

X'TAL
32.768K

OSC
48MHZ

P30,P31

EEPROM Transformer
P27

P27

KBC NS
PC97541V

P39

RJ45
IEEE 1394
Port
P30

MIC Jack

TI PCI7412

LPC

P37

MINI-PCI /
TV Card

P27

P29

Audio Amplifier

X'TAL
25M

X'TAL24.576MHZ

USB Port x 4
USB0~3

P33

PCI Bus interface

X'TAL
32.768KHZ

New Card

P29

PCI-Express

ICH7M
82801

P29

USB8

MiniCard /
WLAN

P18,P19,P20,P21,
P22,P24

P14,P15,P16,P17

Bluetooth

P42

MAX4892
Audio
2N7002
10/100/1G
MAX4892
Switch

USB7

X4 DMI interface

PATA
SATA1

ODD Slave
CN24
P35

DDR II
SODIMM0
CN36
DDR II
SODIMM1
CN37 P12,P13

Dual Channel DDR2

HOT SWAP
BAY

DVI

SM BUS

P6,P7,P8,P9,P10,P11

P37

CRT
C

FSB

SVIO
TVout
LVDS
VGA

TFT LCD Panel
WXGA
WSXGA+
WUXGA P25

PS2 , VGA, DVI , SPDIF

6 in 1 Cardreader
Socket
P32

PCMCIA Slot

Fan Header
P5,P40

P31

Line in
BIOS
TPM

P39

Primary Battery
2nd 8/6 Cell

Connector

Speaker

Phone Jack

P37

MDC 1.5

P36

Super I/O
SMSC
SIO1000

Touch Pad
(Dual-Point)
P40

Connector

FIR
CIR

P38

1
5

Chapter 1

TM 4670/4270/4210 Outlook View
Just for Starters...

A general introduction of ports allow you to connect peripheral devices, as you would with a desktop PC.

Open View

Chapter 1

Item

Description

Display screen

Also called Liquid-Crystal Display (LCD), displaying computer
output.

Microphone

Internal microphone for sound recording.

Keyboard

Inputs data into your computer.

Touchpad

Touch-sensitive pointing device which functions like a
computer mouse.

Click buttons
(Left, center and
right)

The left and right buttons function like the left and right mouse
buttons; the center button serves as a 4-way scroll button.

Palmrest

Comfortable support area for your hands when you use the
computer.

Power button

Turns the computer on and off.

Easy-launch buttons Buttons for launching frequently used programs.

Status indicators

Light-Emitting Diodes (LEDs) that turn on and off to show the
status of the computer’s functions and components.

Icon

Item

Description

"Easy-launch buttons" on page 21

Front View

Item
Icon

#
#
1

Icon

Description
Description

Item

Icon

Description
Item

#
Icon
Item
# Icon
Icon
Item
# N/A
Item
Speakers

Item

Description

"Launch keys" on page 10

Description

Description
Description
Left and right speakers
deliver stereo audio output.

Infrared port

Interfaces with infrared devices(for TravelMate 4270/4670
Series)

Power indicator

Indicates the computer’s power status.

"Launch keys" on page 10
4

Battery indicator Indicates the computer’s battery status.

Line-in jack

Icon
Icon
#

Mic-in jack
Item

Icon

Accepts audio line-in devices (e.g., audio CD player,
stereo walkman).

Accepts inputs from external microphones.

Description

Item
ItemHeadphones/
Item

Description
Description
Connects
to audio line-out devices(e.g., speakers,
speaker/line-out headphones)
Description
jack with
S/PDIF support

5-in-1 card
reader

Accepts Memory Stick(MS), Memory Stick PRO(MS
PRO), MultiMediaCard(MMC), Secure Digital (SD) and
xD-Picture Card(xD)
(for TravelMate 4270/4670 Series)
NOTE: Only one card can operate at any given time.
Note:

Note:

Bluetooth
communication
button/indicator

Press to enable/disable Bluetooth function. Lights to
indicate the status of Bluetooth communications.

Wireless
Press to enable/disable Wireless function. Lights to
communications indicate the status of wireless LAN communications.
button/indicator (manufacturing option)

Chapter 1

Note:

N/A

Latch

Locks and releases the lid.
Note:

Left View

#
1

Icon

Item

Icon

#
#

Description

Item

Icon

Item
DC-in Jack

Icon

Item

Description

Description Connects to an AC adapter.
Description

Modem(RJ-11) port

Connects to a phone line.

Acer MediaBay

Houses an optical drive module, second battery
pack or hard disk drive.(for TravelMate 4670
Series)
Internal optical drive; accepts CDs or DVDs(for
TravelMate 4210/4270 Series)

3
Optical drive
4

Optical disk access
indicator

Lights up when the optical drive is active.

Optical drive eject button

Ejects the optical disk from the drive.

Emergency eject hole

Ejects the optical drive tray when the computer is

Two USB2.0 ports

Connect to USB 2.0 devices(e.g., USB mouse,
USB camera)

Icon

Chapter 1

Icon

Item

Description turned off.

Description

Icon

Item

Description

Icon

Item

Description

Icon

Item

Description

Right View

Item

Item
Icon

Description

Description
Description

Item

Icon

Item

Description

Icon

Connects to IEEE 1394 devices.
Item IEEE 1394 port Description

Icon

Ejects the PC Card from the slot.
Item PC Card slot eject
Description
button

PC Card slot

ExpressCard/34 slot Accepts one ExpressCard/34 module(for
TravelMate 4670 Series)
#

Icon

Item

Description

Two USB 2.0 ports
#

Item

Connect to Universal Serial Bus (USB) 2.0 devices
(e.g., USB mouse, USB camera).

Description

S-video port/TV-out
(NTSC/PAL) port

Connects to a television or display device with Svideo input.(for TravelMate 4270/4670 Series)

Ventilation slots

Enable the computer to stay cool, even after
prolonged use.

External
display(VGA) port

Connects to a display device(e.g., external monitor,
LCD projector)

Connects to one Type II CardBus PC Card.

Icon

Item

Description

Chapter 1

Rear View

#
1

Icon

Item

Icon

Description

Item

Description

Icon

Connects to an Ethernet 10/100/1000 based network.
Item Ethernet(RJ-45) Description

Icon

Item

Icon

Item DVI-D port

Description
Supports digital video connections(for TravelMate 4670

Icon

Item

Description

port
2

Description

Series)

124-pin Acer
ezDock connector

Connects to Acer ezDock(for TravelMate 4670 Series)

Battery

Powers the computer

Kensington lock slot Connects to a Kensington-compatible computer security
lock.

Item

Description

Note
Description

Item

Description

Item

Note
Description
Note

Description
Note

Note

Chapter 1

Bottom View

Item

Description

Item

Description

Battery release latch

Note
Unlatches the battery to remove the battery pack.

Cooling fan

Helps keep the computer cool.
NOTE: Do not cover or obstruct the opening of the fan.

Memory compartment

Houses the computer's main memory

Hard disk bay

Houses the computer’s main memory

Acer MediaBay release
latch

Releases the Acer MediaBay module for removal(for
TravelMate 4670 Series)

Battery lock

Locks the battery in position.

Battery bay

Houses the computer’s battery pack.

Chapter 1

Aspire 5670/5620 Outlook View
Just for Starters...

Open View

Chapter 1

Item

Description

Built-in camera

1.3 megapixel web camera for video communication(for select
models)

Display screen

Also called Liquid-Crystal Display (LCD), displaying computer
output.

Microphone

Internal microphone for sound recording.

Keyboard

Inputs data into your computer.

Arcade/media/
volume buttons

For use with Acer Arcade and other media playing programs.

Touchpad

Touch-sensitive pointing device which functions like a
computer mouse.

Click buttons
(Left, center and
right)

The left and right buttons function like the left and right mouse
buttons; the center button serves as a 4-way scroll button.

Palmrest

Comfortable support area for your hands when you use the
computer.

Power button

Turns the computer on and off.

Item
#

Description
"Launch
keys" on page 10
Description

Item

"Launch keys" on page 10

Easy-launch buttons Buttons for launching frequently used programs.

Status indicators

Light-Emitting Diodes (LEDs) that turn on and off to show the
"Launch keys" on page 10
status of the computer’s functions and components.
"Easy-launch buttons" on page 22

"Launch keys" on page 10

Front View
#

Icon

#
#
1

Icon

# Icon
Icon
# N/A

Item

Description

Item

Description

Item

Description

Item

Description

Item

Description

Item
Item
Speakers

Description
Description
Left and right speakers
deliver stereo audio output.

Infrared port

Interfaces with infrared devices(for Aspire 5670 Series)

Power indicator

Indicates the computer’s power status.

Battery indicator Indicates the computer’s battery status.

Line-in jack

Accepts audio line-in devices (e.g., audio CD player,
stereo walkman).

Mic-in jack

Accepts inputs from external microphones.

Icon
#

Icon

ItemHeadphones/
Description
Connects
to audio line-out devices(e.g., speakers,
speaker/line-out headphones)
Item jack with
Description
S/PDIF support
5-in-1 card
reader

Accepts Memory Stick(MS), Memory Stick PRO(MS
PRO), MultiMediaCard(MMC), Secure Digital (SD) and
xD-Picture Card(xD)
(for Aspire 5670 Series)
NOTE: Only one card can operate at any given time.
Note:

Note:

Chapter 1

Bluetooth
Press to enable/disable Bluetooth function. Lights to
Note:
communication indicate the status of Bluetooth communications.
button/indicator
#

Icon

Note:
Description

Item

Wireless
Press to enable/disable Wireless function. Lights to
communications indicate the status of wireless LAN communications.
button/indicator (manufacturing option)

N/A

Latch

Locks and releases the lid.
Note:

Left View

#
1

Icon

Item

Icon

#
#

Description

Item

Icon

Item
DC-in Jack

Icon

Item

Description

Description Connects to an AC adapter.
Description

Modem(RJ-11) port

Connects to a phone line.

Slot-load optical drive
eject button

Internal optical drive; accepts CDs or DVDs(slotload or tray-load depending on model)

Optical disk access
indicator

Lights up when the optical drive is active.

Slot-load Optical drive

Ejects the optical disk from the drive.

Two USB2.0 ports

Connect to USB 2.0 devices(e.g., USB mouse,
USB camera)

Icon

Chapter 1

Icon

Itemeject button

Item

Description

Right View

Icon

Item

Description

Icon

Item

Description

Item

Item
Icon

Description

Description
Description

Item

Icon

Item

Description

Icon

Connects to IEEE 1394 devices.
Item IEEE 1394 port(4Description
pin)
(for Aspire 5670 Series)

Icon

Ejects the PC Card from the slot.
Item PC Card slot eject
Description
button

PC Card slot

ExpressCard/34 slot Accepts one ExpressCard/34 module(for Aspire
5670 Series)
#

Icon

Item

Description

Two USB 2.0 ports
#

Item

Connect to Universal Serial Bus (USB) 2.0 devices
(e.g., USB mouse, USB camera).

Description

S-video port/TV-out
(NTSC/PAL) port

Connects to a television or display device with Svideo input.(for Aspire 5670 Series)

Ventilation slots

Enable the computer to stay cool, even after
prolonged use.

External
display(VGA) port

Connects to a display device(e.g., external monitor,
LCD projector)

Connects to one Type II CardBus PC Card.

Icon

Item

Description

Chapter 1

Rear View

#
1

Icon

Item

Icon

Description

Item

Description

Icon

Connects to an Ethernet 10/100/1000 based network.
Item Ethernet(RJ-45) Description

Icon

Item

Icon

Item DVI-D port

Description
Supports digital video connections(for Aspire 5670

Icon

Item

Description

port
2

Description

Series)

124-pin Acer
ezDock connector

Connects to Acer ezDock(for selected models)

Battery

Powers the computer

Kensington lock slot Connects to a Kensington-compatible computer security
lock.

Item

Description

Item

Description
Note

Item

Description

Item

Note
Description
Note

Note

Chapter 1

Bottom View

Item

Description

Item

Description

Battery release latch

Unlatches
the battery to remove the battery pack.
Note

Cooling fan

Helps keep the computer cool.
NOTE: Do not cover or obstruct the opening of the fan.

Memory compartment

Houses the computer's main memory

Hard disk bay

Houses the computer’s main memory(secured with screws)

Battery lock

Locks the battery in position.

Battery bay

Houses the computer’s battery pack.

Chapter 1

Indicators
#Your Item
Description
computer provides an
array of three indicators located above the keyboard, in addition to four
indicators positioned at the front panel. These indicators show the status of the computer
and its component.

"Launch keys" on page 10

Item

Description

"Launch keys" on page 10

Item

Description

The power, battery Icon
and wireless
communication
status indicators are visible even when the LCD display is
Function
Description
# closed.
Item
Description
Icon
Icon

Item

Description

"Launch
pageup10when Caps Lock is activated.
Caps Lock
activitykeys" onLights

#
#

Icon

Icon
Icon

"Launch keys" on page 10
Lights upwhen Num Lock is activated.

Item Num Lock activity
Description

HDD

Indicate when the hard disk drive is active.

Bluetooth

Indicates the status of Bluetooth communication.

Item
Wireless LAN
Item

Description
Indicates the status of wireless LAN communication.
Description

Power

Indicates the status of computer’s power status.

Battery

Indicates the computer’s battery status.
NOTE: The lights shows amber when the battery
is charging.
NOTE: The lights showns green when in AC
mode.

Chapter 1

1. Charging:
2. Fully charged:

Easy-Launch Buttons
Located at the upper-right, above the keyboard are four easy-launch buttons. They are User-Programmable
Button, Mail, Web Browser, Acer Empowering Key from left to right.
"Acer
Empowering Technology" on page 1

TravelMate 4670/4270/4210
"Launch Manager" on page 31

Easy-launch button

Default application

Item

"Acer
Empowering Technology" on page 1

Aspire
"Launch Manager" on
page 325670/5620

Easy-launch button

Default application

Default Application

User programmable

Acer Empowering Technology(User-programmable)

Web Browser

Internet browser(User -programmable)

Mail

Email application(User-programmable)

Chapter 1

Touchpad
The build-in touchpad is a pointing device that senses movement on its surface.
This means the cursor responds as you move your finger across the surface of the touchpad.
The touchpad is located in the middle of the palm rest area, providing maximum comfort and efficiency.

Touchpad Basics
TravelMate 4670/4270/4210

Aspire 5670/5620

Move your finger across the touchpad to move the cursor.

Press the left (1) and right (4) buttons located beneath the touchpad to perform selection and
execution functions. These two buttons are similar to the left and right buttons on a mouse.
Tapping on the touchpad is the same as clicking the left button

Use the 4-way scroll (3) button to scroll up or down and move left or right a page. This button
mimics your cursor pressing on the right scroll bar of windows applications.

Function

Left Button(1)

Righ Button(4)

Main touchpad(2)

Execute

Click twice quickly

Tap twice (at the
same speed as
double-clicking the
mouse button)

Select

Click once

Tap once

Drag

Click and hold.
Then slide your
finger across the
touchpad to drag
the cursor over the
selection.

Tap twice quickly; rest
your finger on the
touchpad on the
second tap and drag
the cursor.

Access
context
menu
Scroll

Center button(3)

Click once

CLick and hold to
move up/down/left/
right

NOTE: When using the touchpad, keep it-and your fingers-dry and clean. The touchpad is sensitive to finger
movement; hence, the lighter the touch, the better the response. Tapping harder will not increase the
touchpad’s responsiveness.

Chapter 1

Using the Keyboard
The full-sized keyboard includes an embedded numeric keypad, separate cursor keys, two Windows keys and
twelve function keys.

Lock keys and Embedded Numeric Keypad
The keyboard has four lock keys which you can toggle on and off.

TravelMate 4670/4270/4210

Lock key

Aspire 5670/5620
Description

Lockfeatures
key
Description
The computer
three
lock keys, each with its own status indicator light.

Lock Key

Description

Caps Lock

Caps
+
When
Lock is on, all alphabetic characters are typed in
Desired access
Num
on
Numkey
Lockon
off
uppercase.
Toggle on and
offLock
by pressing
the Caps Lock
the
left side of the keyboard.

Num lock

When Num Lock is on, the embedded keyboard is in numeric mode.
The
keys function as a calculator(complete
with the arithmetic

+
operators+,-,*, and /). Use this mode when you need to do a lot of
numeric data entry. A better solution
would be to connect and

external keypad.

Scroll lock

When Scroll Lock is on, the screen moves one line up or down when
you press the up or down arrow keys respectively. Scroll Lock does
not work with some applications.

The embedded numeric
keypad functions
like a desktop numeric keypad.
It is indicated by small characters
Desired access
Num Lock on
Num Lock off
located on the upper right corner of the keycaps. To simplify the keyboard legend, cursor-control key symbols
are not printed on the keys.

Desired access
Numer keys on
embedded keypad

Num Lock on

Num Lock off

Type numbers in a normal manner

Chapter 1

Desired access

Num Lock on

Cursor-control keys Hold while using cursoron embedded
control keys.
keypad
Main keyboard
keys

Hold while typing letters on
embedded keypad.

Num Lock off
Hold while using cursor-control
keys.
Type the letters in a normal manner.

Windows Keys
The keyboard has two keys that perform Windows-specific functoins.
Windows logo key

Pressed alone, this key has the same effect as clicking on the
Windows Start button; it launches the Start menu. It can also be
used with other keys to provide a variety of functions:
+ Tab (Activates the next Taskbar button)

+ E (Opens the My Computer window)

+ F1 (opens Help and Support)
+ Tab
++F
E (opens the Find: All Files dialog box)
+ F1
+F

+ M (minimizes all windows)

+M
+
+logo
M key + M (undoes the minimize all windows
j + Shift
Windows
action)
+M
+R

+ R (opens the Run dialog box)
Application key

This key has the same effect as clicking the right mouse button; it
opens the application’s context menu.

Hotkeys
The computer employs hotkeys or key combinations to access most of the computer’s controls like screen
brightness, volume output and the BIOS utility. To activate hotkeys, press and hold the key before
pressing the other key in the hotkey combination.

Chapter 1

> + :

> + :
+ :

<
> + :
TravelMate
4670/4270/4210
+ <

> + :

Fn
Fn
Fn
Aspire 5670/5620

Hot Key
Fn+F1

Icon
Fn-F1
Fn-F1
Fn-F1

Fn-F1
Fn-F2
Fn-F2
Fn+F2 Fn-F2

Item

This key will cause a help
message to appear on the display
device that describes the definition
and functionality of the unit hot
keys.

Acer eSettings

Launches the Acer eSetting in
Acer Empowering Technology.
See “Acer Empowering
Technology”

Acer ePower
Management

Launches the Acer ePower
Management in Acer Empowering
Technology. See “Acer
Empowering Technology”

Sleep

Puts the computer in Sleep mode

Display toggle

Switches display output between
the display screen, external
monitor(if connected)and both .

Screen blank

Turns the display screen backlight
off to save power. Press any key
to return

Fn-F2
Fn-F3

Fn+F3 Fn-F3

Fn-F3
Fn-F3

Fn+F4

Fn+F5

Fn-F4
Fn-F4
Fn-F5
Fn-F4

Fn-F4
Fn-F5

Fn+F6
Fn-F6

Description

Hot key help

Fn-F6

Fn-F7

Fn-F7
Fn-F8
Fn-F8

Fn-

Chapter 1

Fn-F5
Fn-F5
Fn-F5

Fn-F5
Fn-F6

Hot Key Fn-F6
Fn+F7

Icon

Item

Fn-F6
Fn-F6
Fn-F7
Fn-F6

Description

Touchpad toggle

Turns the internal touchpad on
and off

Speaker toggle

Turns the speakers on and off

Volume up

Increases the sound volume

Volume down

Decreases the sound volume

Brightness up

Increases the screen brightness

Fn-F7

Fn+F8

Fn-F7
Fn-F6
Fn-F8
Fn-F7
Fn-F7
Fn-F8
Fn-F8
Fn-F8
Fn-F7
FnFn-F8

Fn+w Fn-

FnFn-F8
FnFnFn-

Fn+y FnFn-

FnFnFnFn-

Fn+x

FnFnFn-

FnFnFnFnFnFnFnFnFn+z FnBrightness down
Decrease the screen brightness
Home
FnFnFnFnHome
Home
Home
FnFnHome
Pg Up
FnFnFnHome
FnPg
Up
Pg
Up
FnPg
FnPg Up
Dn
Fn-Up
FnPg
Special Keys FnFnPg
Up
PgDn
Dn
Pg
PgEuro
Dn symbol and the US dollar sign at the upper-center and/or bottom-right of your
You can locate theFnFn-End
Fn-Dn
keyboard.
Pg
Pg
Dn
Fn-End
Fn-End
TravelMate 4670/4270/4210
Fn-End

Fn-End

Aspire 5670/5620
Alt Gr>
<5>

Note
www.microsoft.com/typography/faq/faq12.htm

Chapter 1

<4>
<5>

Note:

Alt Gr>

The Euro Symbol
1.

Open a text editor or word processor.

Either press <

Alt Gr>
<5>
Gr> and then press the <5> key at
> > at the bottom-right of the keyboard, or hold
th <5>

the upper-center of the keyboard.
Note

NOTE: Some fonts and software
do not support the
Euro symbol. Please refer to www.microsoft.com/
www.microsoft.com/typo
graphy/faq/faq12.htm
Note
typography/faq/faq12.htm
for more information.
www.microsoft.com/typo graphy/faq/faq12.htm

The US Dollar Sign
1.

Open a text editor or word processor.

Either press <

> at the bottom-right of the keyboard, or hold
and then press the <4> key at

<4>
<4>

the upper-center of the keyboard.

NOTE: This function varies according to the language settings.
Note:
Note:

Chapter 1

Using theNote:
System Utilities
Acer GridVista(dual-display compatible)
To enable the dual monitor
feature of your notebook, first Start
ensure that
the second
monitorDisplay
is connected, then,
Control
Panel
Note:
select
Start,
Control
Panel,
Display
and
click
on
Settings.
Select
the
secondary
monitor
(2) icon in the
Settings
(2)
display box and then click the check box Extend my Windows desktop onto this monitor. Finally, click Apply to
Extend
Windows
desk
top onto this monitor
confirm the new settings
and clickmy
OK to
complete the
process.
Apply
OK
Note:

Start Control Panel Display
(2)
Extend my Windows desk top onto this monitor
OK

Settings
Apply

Acer GridVista is a handy utility that offers four pre-defined display settings so you can view multiple windows
on the same screen. To access this function, please go to Start, All Programs and click on Acer GridVista.
You may choose any one of the four display settings indicated below:
All Programs
Start All Start
Programs

Acer GridVista
Acer GridVista

Double(vertical), Triple(primary at left), Triple(primary at right), or Quad Acer Gridvista is dual-display
compatible, allowing two displays to be partitioned independently.

Set up Procedure
1.

Run Acer GridVista and select your preferred screen configuration for each display from the taskbar.

Drag and drop each window into the appropriate grid.

Enjoy the convenience of a well-organized desktop.

NOTE: The system utilities work under Microsoft Windows XP only.

Chapter 1

Note:

Launch Manager

Launch Manager allows you to set the four easy-launch buttons located above rhw keyboard. You can access
"Easy-launch
on page and
22 then Launch Manager to start the application.
the Launch Manager by clicking
on Start, buttons"
All Programs,
Start All Programs

Norton AntiVirus

Launch Manager

Norton AntiVirus is an anti-virus software that finds and repairs infected files, and protects against viruses to
keep your computer data safe and secure.

How do I check for viruses?
A Full System Scan scans all files on your computer. To perform a system scan:
1.

Start Norton AntiVirus.
Double click on the Norton AntiVirus icon on the desktop or click on the Start menu in the Windows

taskbar, highlight Programs, and select Norton AntiVirus.
2.

Norton AntiVirus
Start
Programs
In the Norton AntiVirus
main window, click Scan for Viruses.
Norton AntiVirus
Scan for Viruses

Scan
for Viruses
Scan My Computer
In the Scan for Viruses
panel,
click Scan My Computer.

Under Actions, click Actions
Scan.

When the scan is complete, a scan summary appears. Click Finished.

Scan
Finished

Chapter 1

You can schedule customized virus scans that run unattended on specific dates and times or at periodic
intervals. If you are using the computer when the scheduled scan begins, it runs in the background so that you
do not have to stop working.
For more information refer to the Norton Antivirus Help menu.

Chapter 1

Acer Empowering Technology
Acer’s innovative Empowering Technology makes it easy for you to access frequently used functions and
manage your new Acer notebook. It features the following handy utilities:
T
T
T
T
T
T
T

Acer eDataSecurity Management protects data with passwords and advanced encryption algorithms.
Acer eLock Management limits access to external storage media.
Acer ePerformance Management improves system performance by optimizing disk space, memory and
registry settings.
Acer eRecovery Management backs up/recovers data flexibly, reliably and completely.
Acer eSettings Management accesses system information and adjusts settings easily.
Acer ePower Management extends battery power via versatile usage profiles.
Acer ePresentation Management connects to a projector and adjusts display settings conveniently.

For more information, press the <
> key to launch the Empowering Technology menu, then click on the
appropriate utility and select the Help function.

Acer eDataSecurity Management
Acer eDataSecurity Management is handy file encryption utility that protexts your files from being accessed by
unauthorized persons. It is conveniently integrated with Windows explorer as a shell extension for quick and

Chapter 1

easy data encryption/decryption and also supports on-the-fly file encryption for MSN Messager and Microsoft
Outlook.
There are two passwords that can be used to encrypt/decrypt a file; the supervisor passowrd and the filespecific password. The supervisor passwork is a “master” password that cna decrypt any file on your system;
the file-specific password will be used to encrypt files by default, or you cna choose to enter your own filespecific password when encrypting a file.
NOTE: The password used encrypt a file is the unique key that the system needs to decrypt it. If you lose the
password, the supervisor password is the only other key capable of decrypting the file. If you lose both
passwords, there will be no way to decrypt your encryped file! Be sure to safeguard all related
passwords!

Chapter 1

Acer eLock Management
Acer eLock Management is a security utility that allows you to lock up your removable data, optical and floppy
drives to ensure that data can’t be stolen while your notebook is unattended.
T

T
T

Removable data devices - includes USB disk drives, USB pen drives, USB flash drives, USB MP3 drives,
USB memory card readers, IEEE 1394 disk drives and any other removable disk drives that can be
mounted as a file system when plugged into the system.
Optical drive deivces - includes any kind of CD-ROM or DVD-ROM drives.
Floppy disk drives - 3.5-inch disks only.

To activate Acer eLock Management, a password must be set first. Once set, you may apply lock to any of the
three kinds of devices. Lock(s) will immediately be set without any reboot necessary, and will remain locked
after rebooting, until unlocked.
If you do not set a password, Acer eLock Management will reset back to the initial status with all locks
removed.
NOTE: If you lose your password, there is no method to reset it except by reformatting your notebook or taking
your notebook to anAcer Customer Serivce Center. Be sure to remember or write down your password.

Chapter 1

Acer ePerformance Management
Acer ePerformance Management is a system optimization tool that boosts the performance of your Acer
notebook. It provides you with the following options to enhance overall system performance:
T
T
T

Memory optimization - releases unused memory and check usage.
Disk optimization - removes unneeded items and files.
Speed optimization - improves the usability and performance of your Windows XP system.

Chapter 1

Acer eRecovery Management
Acer eRecovery Management is a powerful utility that does away with the need for recovery disks provided by
the manufacturer. The Acer eRecovery Management utility occupies space in a hidden partition on your
system’s HDD. User-created backups are stored on D:\ drive. Acer eRecovery Management provides you
with:
T
T
T

Password protection.
Recovery of applications and drivers.
Image/data backup:
T

Back up to HDD (set recovery point).

T
Back up to CD/DVD.
Image/data recovery tools:
T

Recover from a hidden partition (factory defaults).

Recover from the HDD (most recent user-defined recovery point).

Recover from CD/DVD.

Chapter 1

NOTE: If your computer did not come with a Recovery CD or System CD, please use Acer eRecovery
Management’s “System backup to optical disk” feature to burn a backup image to CD or DVD. To
ensure the best results when recovering your system using a CD or Acer eRecovery Management,
detach all peripherals (except the external Acer ODD, if your computer has one), including your Acer
ezDock.

Acer eSettings Management
Acer eSettings Management allows you to inspect hardware specifications and to monitor the system health
status. Furthermore, Acer eSettings Management enables you to optimize your Windows operating system, so
your computer runs faster, smoother and better.
Acer eSettings Management also:
T
T
T
T
T

Provides a simple graphical user interface for navigating through the program effortlessly.
Displays general system status and advanced monitoring for power users.
Logs when a hardware component has been removed or replaced.
Permits you to migrate personal settings.
Keeps a history log of all alerts that were previously issued.

Chapter 1

Acer eNet Management
Acer eNet Management helps you to quickly and easily connect to both wired and wireless networks in a
variety of locations. To access this utility, either click on the “Acer eNet Management” icon on your notebook,
or start the program from the Start menu. You also have the option to set Acer eNet Management to start
automatically when you boot up your PC.
Acer eNet Management automatically detects the best settings for a new location, while offering you the
freedom to manually adjust the settings to match your needs, simply by right-clicking on the icon in the taskbar.

Acer eNet Management can save network settings for a location to a profile, and automatically apply the
appropriate profile when you move from one location to another. Settings stored include network connection
34

Chapter 1

settings(IP and DNS settings, wireless AP details, etc.), as well as default printer settings. Security and safety
concerns mean that Acer eNet Management does not store username and password information.

Acer ePower Management
Acer ePower Management features a straightforward user interface. To launch it, select Acer ePower
Management from the Empowering Technology interface, or double-click the Acer ePower Management icon
in the task tray.

Acer Mode
The default setting is “Maximum Performance.” You can adjust CPU speed, LCD brightness and other
settings, or click on buttons to turn the following functions on/off: Wireless LAN, Bluetooth, CardBus, Memory
Card, Audio, and Wired LAN.

DC Mode
To suit your usage, there are four pre-defined profiles - Entertainment, Presentation, Word Processing, and
Maximum Battery. Or, you can define up to three of your own profiles.

Create new power scheme
1.

Assign a name for the new scheme.

Choose existing scheme to use as a template.

Select whether used for mains (AC) or batery mode.

Choose which power options best fit your needs, then click OK.

The new profile will appear on the main screen.

Battery status
For real-time battery life estimates based on current usage, referto the panel on the lower left-hand side of the
window.

Chapter 1

You can also click “Advanced Settings” to:
T
T
T
T

Set alarms.
Re-load factory defaults.
Select what actions will be taken when the cover is closed, and set passwords for accessing the system
after Hibernation or Standby.
View information about Acer ePower Management.

Chapter 1

Acer ePresentation Management
Acer ePresentation Management lets you select from two of the most common projector resolutions: XGA and
SVGA.

Chapter 1

Hardware Specifications and Configurations
Processor
Item

Specification

CPU type

Intel

Intel®
®

Intel

Pentium

M YonahProcessor dual core at 1.66~2.33 GHz or higher

Pentium

M Yonah Processor single core at 1.66~1.83 GHz higher

M Yonah Processosr 430/420/410

Celeron

CPU package

uFCPGA

CPU core voltage

Depend on DVI

CPU I/O voltage

1.2V

System Board Major Chips
Item
System core logic

Controller
®

Intel 945GM/ICH7M
Intel® 945PM/ICH7M

Super I/O controller

SIO 1000, LPC interface

Audio controller

Azalia Audio Controller ALC883

Video controller

ATI M56P/54P/52P
UMA

Hard disk drive controller

ICH7M

Keyboard controller

NS PC97541V

IrDA controller

SMSC SIO 1000

DVI controller

CH7307

PCMCIA/ card reader / 1394
controller

TI PCI7412

DDR-soDIMM controller

945PM/945GM

BIOS
Item

Specification

BIOS vendor

Phoenix

BIOS Version

Phoenix First BIOS

BIOS ROM type

Flash ROM

BIOS ROM size

512KB

BIOS package

32 lead of TSSOP

BIOS password control

Set by setup manual

Item
Cache controller

Specification
Built-in CPU

Cache size

2 MB

1st level cache control

Always enabled

2nd level cache control

Always enabled

Cache scheme control

Always enabled

Chapter 1

System Memory
Item

Specification

Memory controller

945GM/945PM

Memory size

256MB/512MB

DIMM socket number

Supports memory size per slot

1024 MB

Supports maximum memory size

2GB (with dual soDIMM modules)

Supports DIMM type

DDRII SDRAM Standard

Supports DIMM Speed

533/667 MHz

Supports DIMM voltage

1.8V

Memory module combinations

You can install memory modules in any combinations as long as
they match the above specifications.

.
LAN Interface
Item

Specification

Supports LAN protocol

10/100/1000 Mbps Fast Ethernet connection

LAN chip

Broadcom 5787/5789 PCI-E GbE
Broadcom 5788E PCI GbE for selected model
Broadcom 4401E PCI 10/100Mbps

LAN connector type

RJ45

LAN connector location

Rear side

.
Wireless LAN
Item

Specification

Card Type

Mini-card/Mini-PCI

Mode

802.11 a/b/g(Mini-Card)
802.11 b/g(Mini-Card)
802.11 b/g(Mini-PCI)

Antenna

Built in 2 antenna(PIFA type)

Support

Wi-Fi, WPA2, WMM, CCX V3/V4

.
Modem Interface
Item

Specification

Data modem data baud rate (bps)

56K ITU

Supports modem protocol

V.90/V.92 AC-Link modem with PTT
approval
Wake-on-Ring ready

Modem connector type

RJ11

Modem connector location

Left side

Bluetooth

Bluetooth 2.0 module(Mini USB module and
built-in)

Chapter 1

VGA
Notice

Discrete

UMA

Chipset for suitable VGA type

945PM

945GM

Video RAM

64/128MB

up to 128MB

USB Port
Item

Specification

USB compliancy level

2.0

OHCI

USB 2.0

Number of USB port

Location

Left Side *2
Right Side *1

Audio Port
Item

Specification

Audio Controller

Azalia Audio Controller (Realtek ALC883)

Audio onboard or optional

Built-in

Mono or Stereo

Stereo

Resolution

20 bit stereo Digital to analog converter
18 bit stereo Analog to Ditial converter

Compatibility

Microsoft PC99/2100, AC97 2.3 & WHQL/WLP2.0

Mixed sound source

Sampling rate

All DACs support 44.1K/48K/96K/192K sample rate
All ADCs support 44.1K/48K/96K sample rate

Internal microphone

Yes

Internal speaker / Quantity

Yes / 2

Support

S/PDIF out / VoIP

PCMCIA Port
Item

Specification

PCMCIA controller

PCI7412

Supports card type

Type II

Number of slots

One

Access location

Right Side

Supports ZV (Zoomed Video) port

Supports 32 bit CardBus

Yes

Keyboard
Item

Specification

Keyboard controller

NS PC97541V

Keyboard vendor & model name

TravelMate series: New Acer Ergo Keyboard
Aspire series: New Acer flat keyboard

Chapter 1

Keyboard
Item

Specification

Total number of keypads

Touchpad with 4-way integrated scroll button

88-89 keys Acer Fine TouchTM
keyboard

Yes

12 function keys

Four easy-launch buttons

Two front access LED buttons

two Windows keys

Hotkey controls

embedded numberic keypad

Multi-Langue support

Spill-proof

Internet browser

email with LED

Empowering key

one user-programmable button

WLAN LED button

Bluetooth LED button

Battery
Item

Specification

Vendor & model name

Sony/Sanyo/Simplo

Battery Type

Li-ion

Pack capacity

65Wh

Number of battery cell

8-cell 2400mAh
8-cell 2000mAh
6-cell 2000mAh
Package configuration

Pin 1
Pin 2

BATT+: Battery+, Battery Positive Terminal

Pin 3

ID : Identify Pin (Note 1)

Pin 4

B/I : Battery-In Pin

Pin 5

TS : Connect to Thermister

Pin 6

SMD : SMBus data interface I/O pin

Pin 7

SMC : SMBus clock interface I/O pin

Pin 8
Pin 9

GND : Battery Negative Terminal

Chapter 1

LCD :15.4" WXGA LCD
Item
Vendor & model name

Specification
CMO
N154I1-L0C
GLARE
TYPE/
N154I1-L0B
NON-GLARE

LPL
LP154W01TLB5 GLARE
LEAD-FREE/
LP154W01TLA1 NONGLARE
LEAD-FREE

Samsung
LTN154X3L01-H00
glare L6-G5/
L01-100 nonglare L6-G5/
LTN154P1L02-V LEADFREE

AUO
B154EW01
V9 16MS
LEAD-FREE
GLARE
TYPE

QDI
QD15TL0702 GLARE /
QD15TL0203 NONGLARE
TYPE LEADFREE

Mechanical Specifications
LCD display area
(diagonal, inch)

15.4”

Active Area(mm)

331.2(H)x
207.0(V)

331.2(H)x20
7.0(V)

Display technology

TFT

Resolution

WXGA
(1280*800)

Pixel Pitch

0.2588(H)x0
.2588(V)

Pixel Arrangement

RGB
vertical
stripe

Display Mode

Normally
White

Typical White
Luminance(cd/m2)
also called Brightness

200

200/170

200

180

185

Luminance Uniformity

N/A

1.25 max.

N/A

Contrast Ratio

400

550/300

300

400

Response Time(Optical
Rise Time/Fall Time)
msec

5/11

16(Tr+Tf)

25(Tr+Tf)

12/4

6/10

Power Supply Voltage

+3.3V

+3.0V

+3.3V

Typical Power
Consumption(watt)

4.22

5.23

4.2

6.5

N/A

Weight

600 g

540/575 g

530 g

585 g

Physical Size(mm)
(Typical)

344(H)x222
(V)x6.2(D)

344(H)x222
(V)x6.5(D)

344(H)x222
(V)x6.35(D)

Electrical Interface

LVDS with 1
pixel/clock

1 channel
LVDS

3.3V LVDS

1 channel
LVDS

Support Color

262144

262K

262144

Viewing Angle(degree)
Horizontal: Right/Left
Vertial: Upper/Lower

45/45
15/35

Temperature Range(oC)
Operating
Storage(shipping)

0~+50
-20~+60

Chapter 1

LCD :15.4" WXGA LCD
Item
Vendor & model name

Specification
15.0" XGA
NB LCD LPL
LP150X08TLA2 LEADFREE/CHINA
MADE

15.0" XGA
NB LCD CMO
N150X3-L09
REV. C2

Mechanical Specifications
LCD display area
(diagonal, inch)

15.0”

Active Area(mm)

304.1(H)x
228.1(V)

Display technology

TFT

Resolution

XGA
(1024*768)

Pixel Pitch(mm)

0.297(H)x
0.297(V)

Pixel Arrangement

RGB
Vertical
stripe

Display Mode

Normally
White

Typical White
Luminance(cd/m2)
also called Brightness

170

200

Luminance Uniformity

N/A

Contrast Ratio

250

Response Time(Optical
Rise Time/Fall Time)
msec

10/20

5/11

Power Supply Voltage

+3.3V

Typical Power
Consumption(watt)

4.76

3.96

Weight

530 g

550 g

Physical Size(mm)
(Typical)

317(H)x241
(V)x5.9(D)

317(H)x242
(V)x5.7(D)

Electrical Interface

LVDS
IS100C30R-C15

LVDS with 1
pixel/clock

Support Color

262144

Viewing Angle(degree)
Horizontal: Right/Left
Vertial: Upper/Lower

45/45
15/35

45/45
20/40

Temperature Range(oC)
Operating
Storage(shipping)

0~+50
-20~+60

Chapter 1

AC Adapter
Item
Vendor & model name

Specification
ROHS DELTA -90W ADP-90SB BBAHF BLACK 1.7X5.5X12.5
LITEON -90W PA-1900-04 QB BLUE 1.7X5.5X11 LF
LSE-90W SLS0202C19A157 LF BLUE 1.7X5.5X11 LF

Input Requirements
Maximum input current (A,
@100Vac, full load)

1.5A @100Vac input and maximum load

Nominal(Rated) frequency
(Hz)

50 or 60 and single phase

Frequency variation range
(Hz)

47 - 63

Nominal voltages (Vrms)

90 - 265

Efficiency

High efficiency 85% minimum, at 100~240Vac AC input, full load,
warm-up condition.

Output Ratings (CV mode)
Rated output voltage

Offers rated output voltage 19.0V

Voltage Range

18.2V to 19.8V

Noise + Ripple

300mvp-pmax (20MHz bandwidth) for resistor load

Rated Power

90Watts continuously at all specified conditions

Output current

0 A (min.)

to 4.74A (max.)

Dynamic Output Characteristics
Start-up time

2 sec. (@115 Vac and 230Vac full load)

Hold up time

at least 10ms (@115 Vac input, full load)

Over Voltage Protection
(OVP)

30V

Over Current
Protection(OCP)

Output current limit is 6A(Max mode)

Short circuit protection

Output can be shorted without damage, and auto recovery

Electrostatic discharge
(ESD)

15kV (at air discharge)
8kV (at contact discharge)

Dielectric Withstand Voltage
Primary to secondary

3000 Vac for 1 second

Leakage current

less than 250uA at 240Vac, 50Hz

Regulatory Requirements

1. CISPR 22 Class B
2. VCCI Class B

Hard Disk Drive Interface
Item
Vendor &
Model Name

Specification
Segate
SATAST98823AS/
HGST
SATA 1.5G NCQ
MORAGA+HTS5410
80G9SA00

Segate SATA
ST9100824AS LF/
Toshiba
MK1032GSX/
HGST
NCQMORAGA+HTS
541010G9SA00

Segate SATA
ST9120821AS LF/
Toshiba SATAI1.5G
W/NCQ MK1234GSX

Chapter 1

Hard Disk Drive Interface
Item

Specification

Capacity (MB)

80000

100000

120000

Bytes per
sector

1024/512

512

Data heads

3/4

Drive Format
Disks

Spindle speed
(RPM)

5400 RPM

Performance Specifications
Buffer size

8192KB

Interface

Serial ATA

Serial ATA
APA7&SATA1.0&SAT
AII(for Toshiba)

Serial ATA

Max. media
transfer rate
(disk-buffer,
Mbytes/s)

57.6/61.6

57.6/57.6/61.6

57.6

Data transfer
rate
(host~buffer,
Mbytes/s)

150 MB/Sec.
SATA 1.0

150 MB/Sec.

5V(DC) +/- 5%

DC Power Requirements
Voltage
tolerance

5V(DC) +/- 5%

DVD-Dual Interface
Item
Vendor & model name

Specification
PHILIPS SDVD8441

PIONEER DVR-K16RA

Transfer rate (KB/sec)

Sustained:
Max 10.9Mbytes/sec

Sustained:
Max 10.8Mbytes/sec

Access Time(DVD)

Random Access: 130 ms
Full Stroke: 240 ms

Random Access: 150 ms
Full Stroke: 300 ms

Performance Specification

Buffer Memory

2MB

Interface

Compliant to ATA/ATAPI-5

ATAPI interface

Chapter 1

DVD-Dual Interface
Item

Specification

Applicable disc format

DVD(Read): DVD-ROM, DVD-Video,
DVD-Audio, DVD-R, DVD-R 3.95GB,
DVD-R Multi-Border, DVD-RW,
DVD+R, DVD+R DL, DVD+R MultiSession, DVD+RW
CD(Read): CD-DA, CD-ROM Mode-1,
CD-ROM/XA Mode-2 Form-1 and
Mode-2 Form-2, CD-i, CD-i Bridge,
Video-CD(MPEG-1), Karaoke CD,
Photo-CD, Enhanced CD, CD Plus,
CD Extra, itrax CD, CD-Text, CD-R,
and CD-RW
DVD(Write): DVD Data&Video
CD(Write): CD-DA, CD-ROM Mode-1,
CD-ROM/XA Mode-2 Form-1 and
Mode-2 Form-2, CD-i, Video-CD, CDText

DVD(Read): DVD-5/9/10/18, DVD-R
3.95G/4.7G, DVD-R DL, DVD-RW,
DVD+R, DVD+R DL, DVD+RW,
DVD+RW high speed, DVD-RAM v2.0/
2.1
CD(Read): CD-DA, CD-ROM Mode-1,
CD-ROM/XA Mode-2 Form-1 and
Mode-2 Form-2, Photo CD, Video CD,
CD-DA, CD-Extra, Mixed-CD, CDText, CD-R, CD-RW, HS CD-RW, US
CD-RW, US+ CD-RW
DVD(Write): DVD-R, DVD-RW,
DVD+RW
CD(Write): CD-DA, CD-i, Video-CD,
CD-Text, Photo CD, CD-Extra, MixedCD, CD-R, CD-RW, HS CD-RW, US
CD-RW, US+ CD-RW

Loading mechanism

Load: Manual

Drawer loading mechanism

5 V +/- 5 % (Operating)

Power Requirement
Input Voltage

Combo Drive Interface
Item
Vendor & model name

Specification
QSIPHILIPS SCB5265

PANASONIC UJDA-770 HLDS GCC-4244N

Transfer rate (KB/sec)(DVD)

Sustained:
Max 11.2Mbytes/sec

Sustained:
Max 10.8Mbytes/sec

Sustained:
Max 11.8Mbytes/sec

Access Time

DVD: Random Access: 126 ms
DVD:Full Stroke: 165 ms

DVD: Typical:180 ms

Average:
CD-ROM110ms
DVD-ROM 120ms

Buffer Memory

2MB

Interface

Compliant to ATA/ATAPI-5

ATAPI interface

Applicable disc format

DVD(Read): DVD 5/9/10/18,
DVD-ROM, DVD-Video, DVD-R
3.95G/4.7G, DVD-RW, DVD+R,
DVD+RW, Multi-Border DVD-R/
DVD-RW, Multi-Session
DVD+R, DVD+RW and DVDRAM
CD(Read): CD-DA, CD-ROM
Mode-1, CD-ROM/XA Mode-2
Form-1 and Mode-2 Form-2,
CD-i Ready, Video-CD(MPEG1), Karaoke CD, Super Video
CD, Photo-CD, Enhanced CD,
CD Plus, CD Extra, i-trax CD,
CD-Text, CD-R, CD-RW
CD(Write): CD-DA, CD-ROM
Mode-1, CD-ROM/XA Mode-2
Form-1 and Mode-2 Form-2,
CD-i, Video-CD, CD-Text

CD: CD-DA, CD-ROM,
CD-R, CD-RW, CDROM XA,
PhotoCD(MultiSession)
DVD: DVD-ROM, DVDVideo, DVDRAM(2.6GB/4.7GB),
DVD-R, DVDRW(Ver1.1), DVD+R,
DVD+RW

1. Reads and writes data
in each CD-ROM, CDROMXA, CD-I FMV,
Video CD, and CDEXTRA
2. Reads data in Photo
CD( Single and Multi
session)
3. Reads and writes
standard CD-DA
4. Reads and writes CDR
5. Reads and writes CDRW
6. Reads data in DVDROM

Loading mechanism

Load: Manual

5 V +/- 5 % (Operating)

Performance Specification

Power Requirement
Input Voltage

Chapter 1

Power Management
ACPI Mode

Power Management

Mech. Off (G3)

All devices in the system are turned off completely.

Soft Off (G2/S5)

OS initiated shutdown. All devices in the system are turned
off completely.

Working (G0/S0)

Individual devices such as the CPU and hard disk may be
power managed in this state.

Sleeping State (S3)

CPU Power Down
VGA Power Down
PCMCIA Suspend
Audio Power Down
Hard Disk Power Down
Super I/O Power Down

Sleeping State (S4)

Also called Hibernate state. System saves all system
states and data onto the disk prior to power off the whole
system.

Dimensions and Weight
Item
Model
Deminsions
Weight

Details
Aspire 1690

Aspire 3510

364(W) x 274.75(D) with max. 28mm(H)
<2950 g except TV SKU

Environmental Requirements
Item

Specification

Temperature
Operating

+5 ~ +35°C

Non-operating

-20 ~ +65°C (storage package)

Humidity
Operating

20% ~ 80% without condensation

Altitude

Operating sea level 0 to 10,000ft
Storage sea level 0 to 40,000ft

Chapter 1

Chapter 2

System Utilities
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However,
if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press m during POST (when “Press to enter Setup” message is prompted
on the bottom of screen).
The setup screen displays BIOS as follows:Navigating the BIOS Utility

Function

Item

Information

Display the system informations

Main

Allows the user to specify standard IBM PC AT
system parameters

Advanced

Provides advanced settings of the system

Security

Provides security settings of the system

Boot

Allows the user to specify the boot options

Exit

Allows the user to save CMOS setting and exit Setup

During setup,all Fn function keys and power saving functions are disabled.
There are five menu options: Main, Advanced, Security, Boot and Exit.
Follow these instructions:
T

To choose a menu, use the cursor left/right keys (zx).

To choose a parameter, use the cursor up/down keys ( wy).

To change the value of a parameter, press p or q.

Press ^ while you are in any of the menu options to go to the Exit menu.

In any menu, you can load default settings by pressing t. You can also press u to save any
changes made and exit the BIOS Setup Utility.

NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys for a
particular menu are shown on the bottom of the screen. Help for parameters are found in the Item
Specific Help part of the screen. Read this carefully when making changes to parameter values.

Chapter 2

Information
PhoenixBIOS Setup Utility
. Info.

Main

CPU Type:
:
CPU Speed
:

Advanced

Security

Boot

Exit

Intel(R) Pentium(R) M processor 1.86GHz
1866 MHz

HDD Model Name:
ST9100822A
HDD Serial Number: 3LG0Y4FE
HATAPI Device:
Slimtype DVDRW S0SW-833S
System BIOS Version: 3A02
VGA BIOS Version: ATi 009.010.002.023
KBC Version:

1A11

Serial Number:

LXT123456705270008EF00

Asset Tag Number:
Product Name:
Manufacturer Name:

Aspire 5510
Acer

UUID:

003B4852C5630010A0EA00C09FAE9B34

F1 Help

↑ ↓
←→

Esc Exit

Select Item

F5/F6 Change Values

F9 Setup Defaults

Select Menu

Enter Select 4 Sub- Menu

F10 Save and Exit

Parameter

Description

CPU Type

This item will show the CPU information of the system.

CPU Speed

This item will show the CPU clock speed.

HDD Model Name

This item will show the Model name of HDD installed on Primary IDE
master. The hard disk model name is automatically detected by the
system. If there is no hard disk present or unknown type, “None”
should be shown on this field

HDD Serial Number

This item will show the Serial number of HDD installed on Primary IDE
master. If no Hard disk or other devices are installed on Primary IDE
master, then it will display a blank line

ATAPI Model Name

This item will show the model name of DVD/CD-ROM drive installed on
system. The DVD/CD-ROM model name is automatically detected by
the system. If there is no DVD/CD-ROM model present or unknown
type, “None” should be shown on this field

System BIOS Version

This field reports the BIOS version of system

VGA BIOS Version

This field reports the VGA version of the system

KBC Version

This field reports the keyboard controller version of the system

Serial Number

This item will show the Serial number of system.

Asset Tag Number

This item will show the Asset Tag number of the system.
Chapter 2

Parameter
Product Name

Description
This field will show product name.

Manufacturer Name

This field will show manufacturer name.

UUID

This will be visible only when there is an internal LAN device present.

Chapter 2

Main
This menu provides you the information of the system.

PhoenixBIOS Setup Utility
Info.

Advanced

Main

Security

Boot

Exit

Item Specific Help
System Time:

[11:59:38]

System Date:

[07/27/2005]

System Memory:

640 KB

Extended Memory:

254 KB

Video Memory

128 MB

Quiet Boot:

[Enabled]

Power on Display:

[Auto ]

Network boot

[Enabled]

F12 Boot Menu:

[Disabled]

D2D Recovery:

[Enabled]

, , or
selects field.

F1 Help
Esc Exit

↑↓
←→

Select Item

F5/F6 Change Values

F9 Setup Defaults

Select Menu

Enter Select 4 Sub-Menu

F10 Save and Exit

Parameter

Description

System Time / System
Date

The hours are displayed with 24 hours format. The values set in these two fields
take effect immediately.

System Memory

This field reports the memory size of system base memory. The size is fixed to
640KB.

Extended Memory

This field reports the memory size of the extended memory in the system.
Extended Memory size = Total memory size - 1 MB

Video Memory

VGA Memory size = 128MB

Quiet Boot

Customer Logo display will be shown during POST when it is selected.

Power on display

Auto: During power on process, the system will detect if any display
device is connected on external video port. If any external display device is
connected, the power on display will be in CRT (or projector) only mode.
Otherwise it will be in LCD only mode.
Both: Simultaneously enable both the integrated LCD screen and the system’s
external video port (for an external CRT or projector).

Network boot

When this is selected, Boot from LAN feature is enabled. When this is not
selected, Boot from LAN feature is then disabled.

Chapter 2

Parameter

Description

F12 Boot Menu

When this is selected, users can modify device boot priority by pressing F12 key
during POST. When this is not selected, device boot priority will not be
adjustable during POST.

D2D Recovery

Allow user to enable/disable the Disk-to-Disk recovery

Chapter 2

Advanced
The Advanced screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.

PhoenixBIOS Setup Utility
Info.

Main

Advanced

Infrared Port::

Security

[Auto]

Boot

Exit

Item Specific Help

Configure serial port B
using oprions:
[Disabled]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when
controlled by OS

F1 Help
Esc Exit

↑ ↓
← →

Select Item

F5/F6 Change Values

F9 Setup Defaults

Select Menu

Enter Select 4 Sub- Menu

F10 Save and Exit

The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.

Description
Infrared Port

Configure serial port B using options:
[Disabled]: No configuration
[Enabled]: User configuration
[Auto]: BIOS or OS chooses configuration
(OS Controlled) Displayedd when controlled
by OS

Option
Disabled
Enabled
Auto

Chapter 2

Security
The Security screen contains parameters that help safeguard and protect your computer from
unauthorized use.

Info.

PhoenixBIOS Setup Utility
Security
Advanced

Main

Clear

User Password Is:

Clear

HDD Password Is:

Clear
19894480

Set Supervisor Password
Set User Passord
Set HDD Password

[Enter]
[Enter]

Password on Boot:

[Disabled]

F1 Help

↑ ↓
←→

Esc Exit

Exit

Item Specific Help

Supervisor Password Is:

HDD Master ID:

Boot

[Enter]

Supervisor Password
controls accesses of the
setup utility.

Select Item

F5/F6 Change Values

F9 Setup Defaults

Select Menu

Enter Select 4 Sub-Menu

F10 Save and Exit

The table below describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.

Parameter

Description

Option

Supervisor Password Is

N/A

User Password Is

N/A

HDD Password Is

N/A

HDD Master ID

N/A

Set Supervisor Password

Press Enter to set the administrator
password. When set, this password
protects the BIOS Setup Utility from
unauthorized access.
[Set]: System password is set
[Clear]: System password is not set

Length -- No more than 8
characters
Characters -- 0-9, A-Z (not
case sensitive)

Set User Password

Chapter 2

Parameter

Description

Option

Set HDD Password

When shown as [Locked], the hard drive
password currently can not be changed
or disabled.
To change or disable it, turn off the
system and enter Setup immediately after
turning it back on.
Press [Enter] to input change, or disable
hard drive password.

Enter

Password on boot

Defines whether a password is required
or not while the events defined in this
group happened. The following suboptions are all requires the Supervisor
password for changes and should be
grayed out if the user password was used
to enter setup.
Allows the user to specify whether or not
a password is required to boot.

Disabled
Enabled

Set Supervisor/User Password
If password on boot is required, the password must be set otherwise it cannot be enabled.
The formats of the password are as follows:
Length
Characters

No more than 8 characters
0-9,A-Z (not case sensitive)

While these fields are highlighted and press “Enter”, a window similar to the following is shown:

Set SupervisorPassword
Enter New Password

[

]

Confirm New Password

[

]

If there is an old password then setup will prompt with the following window instead and a current password
will be required to be entered at first:

Set Supervisor Password

Enter current password

[

]

Enter New Password

[

]

Confirm New Password

[

]

Chapter 2

User can now type password in field “Enter New Password”, and re-enter password in field “Confirm New
Password” for verification.
If the verification is OK:
The password setting is complete after user presses enter.

Setup Notice
Changes have been saved.
[ continue]

If the current password entered does not match the actual current password:

Setup Warning
Invalid password
Re-enter Password
[ continue]

If the new password and confirm new password strings do not match:

Setup Warning
Password do not match
Re-enter Password

Chapter 2

Boot
This menu allows the user to decide the order of boot devices to load the operating system. Bootable
devices includes the distette drive in module bay, the onboard hard disk drive and the CD-ROM
in module bay and onboard LAN device.

PhoenixBIOS Setup Utility
Info.

Main

Advanced

Security

Boot

Exit

Item Specific Help

+Hard Drive
CD-ROM/DVD Drive
Network Boot
Floppy Devices

+ and - indicate device
categories. Use
to expand/collapse.
Boot order is top-down
using only the top
device in each category.
Use and to
move highlighted item
up and down.

F1 Help

↑ ↓
←→

Esc Exit

Select Item

F5/F6 Change Values

F9 Setup Defaults

Select Menu

Enter Select 4 Sub-Menu

F10 Save and Exit

Parameter
+Hard Drive
Floppy Devices

Description
+ and - indicate device categories. Use to expand/
collapse.

CD-ROM/DVD Drive

Boot order is top-down using only the top device in each
category.

Network Boot

Use and to move highlighted item up and down.

Chapter 2

Exit
The Exit screen contains parameters that help safeguard and protect your computer from unauthorized use.

PhoenixBIOS Setup Utility
Info.

Main

Advanced

Security

Item Specific Help

Exit Saving Changes
Exit Dicarding Changes
Load Setup Defaults
Discard Changes
Save Changes

Help

Esc Exit

↑ ↓
←→

Exit

Boot

Exit System Setup and save
your changes to CMOS.

Select Item

F5/F6 Change Values

F9 Setup Defaults

Select Menu

Enter Select 4 Sub-Menu

F10 Save and Exit

The table below describes the parameters in this screen.

Parameter

Description

Exit Saving Changes

Exit System Setup and save your changes to CMOS

Exit Discarding
Changes

Exit utility without saving Setup data to CMOS

Load Setup Default

Load default values for all SETUP items

Discard Changes

Load previous values from CMOS for all SETUP items

Save Changes

Save Setup Data to CMOS

Chapter 2

Chapter 3

Machine Disassembly and Replacement
This chapter contains step-by-step procedures on how to disassemble the notebook computer for
maintenance and troubleshooting.
To disassemble the computer, you need the following tools:
T

Wrist grounding strap and conductive mat for preventing electrostatic discharge

Small Philips screw driver

Philips screwdriver

Plastic flat head screw driver

Tweezers
NOTE: The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatch when putting back the components.
When you remove the stripe cover, please be careful not to scrape the cover.
T

Chapter 3

General Information
Before You Begin
Before proceeding with the disassembly procedure, make sure that you do the following:
1.

Turn off the power to the system and all peripherals.

Unplug the AC adapter and all power and signal cables from the system.

Remove the battery pack.

NOTE: There are several types of screws used to secure bottom case and upper case assembly. The screws
vary in length. Please refer the picture below, group the same type of screws together during service
disassembling. Please also remember the screw location for each screw type. If you fasten the screw to
the wrong location, the screw may be too long to damage the main board.

Chapter 3

Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence
and instructs you on the components that need to be removed during servicing. For example, if you want to
remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in
that order.

Chapter 3

Partname

Part No

SCREW M2.5*3.5-I(NI)(NYLOK)

86.AAV7.001

SCWER M2.5*3.0I(BNI)(NYLOK)EP

86.T25V7.012

SCREW M2.0*5.0 I-(BNI)(NYLOK)

86.T23V7.015

SCREW M2.5-0.45*3.5-F(ANTI-LOOSE)

86.AA7V7.002

SCREW M2.0*3.0-I-NI-NYLOK

TBD

SCREW M2.5*4-I(BNI)

86.T23V7.019

SCREW M2.5*6-I(BNI)(NYLOK)

86.A08V7.004

SCREW M2.5*6.0-P(NI)(NYLOK)

86.AA7V7.003

SCREW M1.7*3.0-I(BK)

86.T50V7.001

SCREW M2.5*5.0-I(NI)(NYLOK)

86.T23V7.010

SCREW M2.0*5-I(NI)(NYLOK)

86.T23V7.006

SCREW M3*0.5+3.5I

TBD

Chapter 3

Removing the Adapter and Battery Pack
1.

Unplug the adapter.

Release the battery lock.

Slide the battery latch.

Remove the battery pack.

Chapter 3

Removing the TV Tuner, Heatsink Module, CPU, and HDD
Module
Remove the Heatsink Cover
1.

Release the six screws securing the heatsink cover. (The six screws are attached to the heatsink cover)

Lift the heatsink cover up and remove it.

Remove the TV Tuner Card(for selected models)
1.

Disconnect the TV tuner cable and antenna from the TV tuner card.

Press the left and right latch to release the TV tuner card.

Disconnect the TV tuner cable and antenna from the TV board.

Remove the Heatsink Module

Disconnect the main fan cable from the mainboard.

Remove the seven screws securing the heatsink module.

Chapter 3

Remove the heatsink module from the main unit.

Removing the HDD Module
1.

Release the two screws securing the HDD cover. (One screw is attached to the HDD cover)

Remove the HDD cover.

Remove the screw securing the HDD.

Holding the mylar and pull the HDD module out of the main unit.

Removing the CPU
1.

Use a flat screw driver and turn the screwdriver counterclockwise to unlock the CPU.

Remove the CPU from the mainboard.

Chapter 3

Removing the Memory and Wireless Card
Remove the Memory
1.

Press the latch on left and right side to pop out the memory and remove it.

Remove the other memory.

Removing the Wireless Card
1.

Disconnect the wireless antenna from the wireless card.

Remove the two screws securing the wireless card.

Remove the wireless card from the mainboard.

Chapter 3

Removing the Bluetooth Module

Remove the screw securing the Bluetooth module.

Remove the Bluetooth connector from the mainboard.

Remove the Bluetooth cable from the Bluetooth wire groove.

Remove the Bluetooth module from the main unit.

Remove the two screws securing the Bluetooth bracket.

Remove the Bluetooth module from the Bluetooth bracket.

Disconnect the Bluetooth cable from the Bluetooth module.

Chapter 3

Disassembling the Main Unit into Upper Case and Lower Case
1.

Disconnect the power cable from the mainboard.

Remove the three screws securing the middle cover on the rear panel.

Open the notebook.

Release the clasp of middle cover and remove the middle cover from the main unit.

Remove the two screws securing the keyboard.

Turn the keyboard over.

Unlatch the keyboard FFC latch and remove the keyboard from the main unit.

Chapter 3

Disconnect the LCD cable from the mainboard as shown.

Remove the two screws on left and right hinges.

Remove the LCD module from the main unit and be careful to pull the antenna out.

10. Remove the screw securing the ODD module.
11. Push the ODD module out of the main unit.

12. Remove the five screws securing the upper case.
13. Remove the 22 screws securing the lower case.

Chapter 3

14. Disconnect the LID switch cable from the mainboard.
15. Disconnect the audio DJ cable from the mainboard. (Aspire series only)
16. Disconnect the MDC cables.

17. Disconnect the MIC wire cable from the mainboard.
18. Unlatch the touchpad board FFC and disconnect the touchpad board FFC from the mainboard.

19. Lift up the upper case to separate the upper and lower case.

Chapter 3

Remove the Touchpad Board
1.

Remove the four screw securing the touchpad board and disconnect the touchpad FFC from touchpad
board.

Remove the touchpad board from the upper case.

Remove the Second Fan(for selected model)
1.

Disconnect the second fan cable from the mainboard.

After removing the mainboard, remove the two screws securing the second fan.

Chapter 3

Remove the second fan from the lower case.

Chapter 3

Remove the Mainboard
1.

Disconnect the speaker cable from the mainboard.

Remove the screw securing the MDC board.

Remove the MDC board from the mainboard.

Disconnec the MDC cable from the MDC board.

Unlatch the latch and disconnect the USB FFC from the mainboard.

Remove the screw securing the USB module.

Chapter 3

Remove the USB module from the lower case.

Unlatch the latch and disconnect the USB FFC from the USB module.

10. Remove the PCMCIA dummy card from the lower case.

11. Remove the mainboard from the lower case.

12. This completes the main unit disassembly.

NOTE: For models with CIR board and DVI-D port, please refer to following steps.
1.

Use hex screw driver to release the two screw on the rear panel.

Chapter 3

Release the screw securing the CIR board and remove the mainboard from the lower case.

Disconnect the CIR cable from the CIR board to separate the CIR board and mainboard.

Remove the two screws securing the TV board.

Remove the TV board from the lower case.

This completes the main unit disassembly.

Chapter 3

Disassembling the LCD Module
1.

Remove the four screw caps from the LCD module.

Remove the four screw securing the LCD bezel.

NOTE: For LCD module with CCD, please refer to following steps.
1.

Remove the six screw caps for the LCD module.

Remove the six screws securing the LCD module.

Remove the LCD bezel.

Remove the 13 screws securing the LCD panel.

Chapter 3

For LCD with CCD, remove the 11 screws securing the LCD panel.

Lift up the inverter board.

DIsconnect the inverter cables from the inverter board and remove the inverter board.

Remove the LCD panel from the LCD cover.

Remove the two screws securing the left LCD brackets.

10. Remove the left LCD bracket from the LCD panel.

11. Remove the two screws securing the right LCD bracket.
12. Remove the right LCD bracket from the LCD panel.

13. Remove the tape on the LCD cable.
78

Chapter 3

14. Disconnect the LCD cable and remove the LCD cable from the LCD panel.

15. This completes the LCD module disassembly.

Remove the CCD module
1.

Remove the five screws securing the CCD brackets and remove the CCD brackets

Lift the CCD plastic bracket up.

Remove the CCD module.

Be careful that the CCD cable is combined with the antenna.
CCD

Antenna

Chapter 3

Antenna

Reassembling the LCD Module

Connect the LCD cable to the LCD panel.

Place the tape on the LCD cable.

Place the right LCD bracket back to the LCD panel

Secure the right LCD bracket with the two screws.

Place the left LCD bracket back to the LCD panel

Secure the left LCD bracket with the two screws.

Place the LCD panel back to the LCD cover.

Place the inverter board back to the LCD module and connect the inverter cables to the inverter board.

Secure the LCD panel with the 13 screws.

Chapter 3

10. Place the LCD bezel back to the LCD module. Push each side of the bezel to make it clip to the LCD
cover well.

11. Secure the LCD bezel with four screws.
12. Place the four screw caps back.

13. This completes the LCD module reassembly.

Chapter 3

HDD disassembly & Reassembly

Remove the four screws securing the HDD bracket.

Remove the HDD bracket from the HDD.

Place the HDD bracket back to the HDD.

Secure the HDD with the four screws.

This completes HDD module disassembly and reassembly.

Chapter 3

ODD disassembly & Reassembly
1.

Remove the four screws securing the ODD module.

Remove the ODD bracket from the ODD.

Place the ODD bracket back to the ODD.

Secure the ODD with the four screw.

This completes ODD module disassembly and reassembly.

Chapter 3

Main Unit Reassembly
Reassembling the Mainboard, Uppercase, and Lowercase
1.

Place the mainboard back to the lower case.

Insert the PCMCIA dummy card back to the lower case.

Connect the USB FFC to the USB module and latch it well.

Place the USB module back to the lower case.

Secure the USB module with one screw.

Connect the USB FFC to the mainboard and latch it well.

Connect the MDC cable to the MDC board.

Place the MDC board back to the mainboard.

Chapter 3

Secure the MDC board with one screw.

10. Connect the speaker cable to the mainboard.

11. Aim the location of Bluetooth and wireless launch button.
12. Place the upper case back to the lower case.

13. Connect the touchpad board FFC to the mainboard and latch it well.

14. Connect the MIC wire cable to the mainboard.

Chapter 3

15. Reconnect the MDC cables as shown.

16. Connect the Audio DJ FFC to the mainboard.
17. Connect the LID switch cable back to the mainboard.

18. Secure the lower case with 22 screws.

19. Secure the upper case with 5 screws.

Reassembling the ODD
1.

Place the ODD module back to the main unit.

Chapter 3

Secure the ODD module with one screw.

Reassembling the LCD Module to Main Unit

Place the LCD module back to the main unit.

Put the antenna through the hole.

Secure the LCD module with two screws on left and right hinges.

Connect the LCD cable to the mainboard.

Place the keyboard back to the main unit.

Connect the keyboard FFC to the mainboard and latch it well.

Turn the keyboard over.

Chapter 3

Secure the keyboard with two screws.

Place the middle cover back to the main unit.

10. Close the notebook.

11. Secure the middle cover with three screws on the rear panel.

12. Connect the power cable to the mainboard.

Reassembling the Bluetooth Module
1.

Connect the Bluetooth cable to the Bluetooth module.

Place the Bluetooth module to the Bluetooth bracket.

Secure the Bluetooth bracket with the two screws.

Chapter 3

Place the Bluetooth module back to the main unit.

Secure the Bluetooth module with one screw.

Connect the Bluetooth cable to the mainboard.

Place the Bluetooth cable in the wire groove.

Reassembling the CPU

Aim the pin position on the CPU socket, then place the CPU back to the socket.

Use a flat screw driver and turn the screwdriver clockwise to lock the CPU.

Chapter 3

Reassembling the Memory
1.

Place the DDR memory back to the mainboard as shown and press it down to latch it.

Reassembling the Heatsink module
1.

Place the heatsink module back to the main unit.

Secure the heatsink module with the seven screws.

Connect the main fan cable to the mainboard.

Reassembling the Wireless Card
1.

Place the wireless card back to the mainboard as shown.

Secure the wireless card with two screws.

Chapter 3

Connect the wireless antenna to the wireless card.

Reassembling the HDD
1.

Place the HDD back to the main unit.

Secure the HDD with one screw.

Place the HDD cover back to the main unit.

Secure the HDD cover with the two screws.

Reassembling the heatsink cover & Battery

Aim the three hooks to the holes on the rear panel and place the heatsink cover back to the lower case.

Secure the heatsink cover with six screws.

Chapter 3

Place the battery back.

This completes the main unit reassembly.

Chapter 3

Chapter 4

Troubleshooting
Use the following procedure as a guide for computer problems.
NOTE: The diagnostic tests are intended to test this model. Non-Acer products, prototype cards, or modified
options can give false errors and invalid system responses.
1.

Duplicate symptom and obtain the failing symptoms in as much detail as possible.

Distinguish symptom. Verify the symptoms by attempting to re-create the failure by running the diagnostic
test or by repeating the same operation.

Disassemble and assemble the unit without any power sources.

If any problem occurs, you can perform visual inspection before you fellow this chapter’s instructions. You
can check the following:
power cords are properly connected and secured;
there are no obvious shorts or opens;
there are no obviously burned or heated components;
all components appear normal.

Use the following table with the verified symptom to determine which page to go to.

Symptoms (Verified)

Go To

Power failure. (The power indicator does not go
on or stay on.)

“Power System Check” on page 95.

POST does not complete. No beep or error
codes are indicated.

“Power-On Self-Test (POST) Error Message” on
page 97
“Undetermined Problems” on page 109

POST detects an error and displayed messages
on screen.

“Error Message List” on page 98

Other symptoms (i.e. LCD display problems or
others).

“Power-On Self-Test (POST) Error Message” on
page 97

Symptoms cannot be re-created (intermittent
problems).

Use the customer-reported symptoms and go to
“Power-On Self-Test (POST) Error Message” on
page 97
“Intermittent Problems” on page 108
“Undetermined Problems” on page 109

Chapter 4

System Check Procedures
External Diskette Drive Check
If an error occurs with the internal diskette drive, reconnect the diskette connector on the system board.
If the error still remains:
1.

Reconnect the external diskette drive/DVD-ROM module.

Replace the external diskette drive/CD-ROM module.

Replace the main board.

External CD-ROM Drive Check
Do the following to isolate the problem to a controller, drive, or CD-ROM. Make sure that the CD-ROM does
not have any label attached to it. The label can cause damage to the drive or can cause the drive to fail.
Do the following to select the test device:
1.

Boot from the diagnostics diskette and start the diagnostics program.

See if CD-ROM Test is passed when the program runs to CD-ROM Test.

Follow the instructions in the message window.

If an error occurs, reconnect the connector on the System board. If the error still remains:
1.

Reconnect the external diskette drive/CD-ROM module.

Replace the external diskette drive/CD-ROM module.

Replace the main board.

Keyboard or Auxiliary Input Device Check
Remove the external keyboard if the internal keyboard is to be tested.
If the internal keyboard does not work or an unexpected character appears, make sure that the flexible cable
extending from the keyboard is correctly seated in the connector on the system board.
If the keyboard cable connection is correct, run the Keyboard Test.
If the tests detect a keyboard problem, do the following one at a time to correct the problem. Do not replace a
non-defective FRU:
1.

Reconnect the keyboard cables.

Replace the keyboard.

Replace the main board.

The following auxiliary input devices are supported by this computer:
T

Numeric keypad

External keyboard

If any of these devices do not work, reconnect the cable connector and repeat the failing operation.

Memory check
Memory errors might stop system operations, show error messages on the screen, or hang the system.
1.

Boot from the diagnostics diskette and start the doagmpstotics program (please refer to main board.

Go to the diagnostic memory in the test items.

Press F2 in the test items.

4. Follow the instructions in the message window.
NOTE: Make sure that the DIMM is fully installed into the connector. A loose connection can cause an error.
94

Chapter 4

Power System Check
To verify the symptom of the problem, power on the computer using each of the following power sources:
1.

Remove the battery pack.

Connect the power adapter and check that power is supplied.

Disconnect the power adapter and install the charged battery pack; then check that power is supplied by
the battery pack.

If you suspect a power problem, see the appropriate power supply check in the following list:
T

Chapter 4

“Check the Battery Pack” on page 96

Check the Battery Pack
To check the battery pack, do the following:
From Software:
1.

Check out the Power Management in control Panel

In Power Meter, confirm that if the parameters shown in the screen for Current Power Source and Total
Battery Power Remaining are correct.

Repeat the steps 1 and 2, for both battery and adapter.

This helps you identify first the problem is on recharging or discharging.

From Hardware:
1.

Power off the computer.

Remove the battery pack and measure the voltage between battery terminals 1(+) and 6(ground). See the
following figure

If the voltage is still less than 7.5 Vdc after recharging, replace the battery.

To check the battery charge operation, use a discharged battery pack or a battery pack that has less than 50%
of the total power remaining when installed in the computer.
If the battery status indicator does not light up, remove the battery pack and let it return to room temperature.
Re-install the battery pack.
If the charge indicator still does not light up, replace the battery pack. If the charge indicator still does not light
up, replace the DC/DC charger board.

Touchpad check
If the touchpad doesn’t work, do the following actions one at a time to correct the problem. Do not replace a
non-defective FRU:
1.

After rebooting, run Tracking Pad PS2 Mode Driver. For example, run Syn touch driver.

Run utility with the PS/2 mouse function and check if the mouse is working.

If the PS/2 mouse does not work, then check if the main board to switch board FPC is connected O.K.

If the main board to switch board FPC is connected well, then check if the FCC on touch pad PCB
connects properly.

If the FFC on touch pad PCB connects properly, then check if LS851 JP1 Pin6=5V are pulese. If yes, then
replace switch board. If no, then go to next step.

Replace touch pad PCB.

If the touch pad still does not work, then replace FPC on Track Pad PCB.

After you use the touchpad, the pointer drifts on the screen for a short time. This self-acting pointer movement
can occur when a slight, steady pressure is applied to the touchpad pointer. This symptom is not a hardware
problem. No service actions are necessary if the pointer movement stops in a short period of time.

Chapter 4

Power-On Self-Test (POST) Error Message
The POST error message index lists the error message and their possible causes. The most likely cause is
listed first.
NOTE: Perform the FRU replacement or actions in the sequence shown in FRU/Action column, if the FRU
replacement does not solve the problem, put the original part back in the computer. Do not replace a
non-defective FRU.
This index can also help you determine the next possible FRU to be replaced when servicing a computer.
If the symptom is not listed, see “Undetermined Problems” on page 109.
The following lists the error messages that the BIOS displays on the screen and the error symptoms classified
by function.
NOTE: Most of the error messages occur during POST. Some of them display information about a hardware
device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the
way it has been configured.
NOTE: If the system fails after you make changes in the BIOS Setup Utility menus, reset the computer, enter
Setup and install Setup defaults or correct the error.

Chapter 4

Index of Error Messages
Error Message List
Error Messages

FRU/Action in Sequence

Struck Key

See “Keyboard or Auxiliary Input Device Check” on page 94

System CMOS checksum bad - Default
configuration used

RTC battery

Real time clock error

Run BIOS Setup Utility to reconfigure system, then reboot system.
RTC battery
Run BIOS Setup Utility to reconfigure system time, then reboot
system.
Main board

Previous boot incomplete - Default configuration
used

“Load Default Settings” in BIOS Setup Utility.
RTC battery
Main baord

Invalid System Configuration Data

“Load Default Settings” in BIOS Setup Utility.
Main board

Operating system not found

Enter Setup and see if fixed disk and drive A are properly identified.
Dikette drive
Hard disk drive
Main board

Chapter 4

Error Message List
No beep Error Messages
Power-on indicator turns off and LCD is blank.

FRU/Action in Sequence
Power source (battery pack and power adapter.) See “Power
System Check” on page 95
Ensure every connector is connected tightly and correctly.
Reconnect the DIMM.
Main board.

Power-on indicator turns on and LCD is blank.

Power source (battery pack and power adapter.) See “Power
System Check” on page 95
Reconnect the LCD connector
Hard disk drive
LCD cable
LCD inverter
LCD
Main board

Power-on indicator turns on and LCD is blank.
But you can see POST on an external CRT.

Reconnect the LCD connectors.
LCD cable
LCD inverter
LCD
Main board

Power-on indicator turns on and a blinking cursor
shown on LCD during POST.

Chapter 4

Ensure every connector is connected tightly and correctly.
Main board

Phoenix BIOS Beep Codes
Code

Beeps

Verify Real Mode

03h

Disable Non-Maskable Interrupt (NMI)

04h

Get CPU type

06h

Initialize system hardware

07h

Disable shadow and execute code from the
ROM.

08h

Initialize chipset with initial POST values

09h

Set IN POST flag

0Ah

Initialize CPU registers

0Bh

Enable CPU cache

0Ch

Initialize caches to initial POST values

0Eh

Initialize I/O component

0Fh

Initialize the local bus IDE

10h

Initialize Power Management

11h

Load alternate registers with initial POST
values

12h

Restore CPU control word during warm boot

13h

Initialize PCI Bus Mastering devices

14h

Initialize keyboard controller

16h

1-2-2-3

17h

BIOS ROM checksum
Initialize cache before memory autosize

18h

8254 timer initialization

1Ah

8237 DMA controller initialization

1Ch

Reset Programmable Interrupt Controller

20h

1-3-1-1

22h

1-3-1-3

24h

Test DRAM refresh
Test 8742 Keyboard Controller
Set ES segment register to 4 GB

28h

Autosize DRAM

29h

Initialize POST Memory Manager

2Ah

Clear 215 KB base RAM

2Ch

1-3-4-1

RAM failure on address line xxxx

2Eh

1-3-4-3

RAM failure on data bits xxxx of low byte of
memory bus

2Fh

Enable cache before system BIOS shadow

32h

Test CPU bus-clock frequency

33h

Initialize Phoenix Dispatch Manager

36h

Warm start shut down

38h

Shadow system BIOS ROM

3Ah

Autosize cache

3Ch

Advanced configuration of chipset registers

3Dh

Load alternate registers with CMOS values

41h

Initialize extended memory for RomPilot.

42h

Initialize interrupt vectors

45h
46h

100

POST Routine Description

02h

POST device initialization
2-1-2-3

Check ROM copyright notice

Chapter 4

Code

Beeps

47h

POST Routine Description
Initialize I20 support

48h

Check video configuration against CMOS

49h

Initialize PCI bus and devices

4Ah

Initialize all video adapters in system

4Bh

QuietBoot start (optional)

4Ch

Shadow video BIOS ROM

4Eh

Display BIOS copyright notice

50h

Display CPU type and speed

51h

Initialize EISA board

52h

Test keyboard

54h

Set key click if enabled

55h
58h

Enable USB devices
2-2-3-1

Test for unexpected interrupts

59h

Initialize POST display service

5Ah

Display prompt “Press F2 to enter SETUP”

5Bh

Disable CPU cache

5Ch

Test RAM between 512 and 640 KB

60h

Test extended memory

62h

Test extended memory address lines

64h

Jump to User Patch1

66h

Configure advanced cache registers

67h

Initialize Multi Processor APIC

68h

Enable external and CPU caches

69h

Setup System Management Mode (SMM) area

6Ah

Display external L2 cache size

6Bh

Load custom defaults (optional)

6Ch

Display shadow-area message

6Eh

Display possible high address for UMB
recovery

70h

Display error messages

72h

Check for configuration errors

76h

Check for keyboard errors

7Ch

Set up hardware interrupt vectors

7Eh

Initialize coprocessor if present

80h

Disable onboard Super I/O ports and IRQs

81h

Late POST device initialization

82h

Detect and install external RS232 ports

83h

Configure non-MCD IDE controllers

84h

Detect and install external parallel ports

85h

Initialize PC-compatible PnP ISA devices

86h

Re-initialize onboard I/O ports

87h

Configure Motherboard Configurable Devices
(optional)

88h

Initialize BIOS Data Area

89h

Enable Non-Maskable Interrupts (NMIs)

8Ah

Initialize Extended BIOS Data Area

Chapter 4

101

Code

Beeps

Test and initialize PS/2 mouse

8Ch

Initialize floppy controller

8Fh

Determine number of ATA drives (optional)

90h

Initialize hard-disk controllers

91h

Initialize local-bus hard-disk controllers

92h

Jump to UserPatch2

93h

Build MPTABLE for multi-processor boards

95h

Install CD ROM for boot

96h

Clear huge ES segment register

97h
98h

Fixup Multi Processor table
1-2

Search for option ROMs. One long, two short
beeps on checksum failure.

99h

Check for SMART drive (optional)

9Ah

Shadow option ROMs

9Ch

Set up Power Management

9Dh

Initialize security engine (optional)

9Eh

Enable hardware interrupts

9Fh

Determine number of ATA and SCSI drives

A0h

Set time of day

A2h

Check key lock

A4h

Initialize Typematic rate

A8h

Erase F2 prompt

AAh

Scan for F2 key stroke

ACh

Enter SETUP

AEh

Clear Boot flag

B0h

Check for errors

B1h

Inform RomPilot about the end of POST.

B2h
B4h

102

POST Routine Description

8Bh

POST done- prepare to boot operating system
1

One short beep before boot

B5h

Terminate QuietBoot (optional)

B6h

Check password (optional)

B7h

Initialize ACPI BIOS

B9h

Prepare Boot

BAh

Initialize SMBIOS

BBh

Initialize PnP Option ROMs

BCh

Clear parity checkers

BDh

Display MultiBoot menu

BEh

Clear screen (optional)

BFh

Check virus and backup reminders

C0h

Try to boot with INT 19

C1h

Initialize POST Error Manager (PEM)

C2h

Initialize error logging

C3h

Initialize error display function

C4h

Initialize system error handler

C5h

PnPnd dual CMOS (optional)

C6h

Initialize notebook docking (optional)

Chapter 4

Code

Beeps

C7h

POST Routine Description
Initialize notebook docking late

C8h

Force check (optional)

C9h

Extended checksum (optional)

CAh

Redirect Int 15h to enable remote keyboard

CBh

Redirect Int 13h to Memory Technologies
Devices such as ROM, RAM, PCMCIA, and
serial disk.

CCh

Redirect Int 10h to enable remote serial video

CDh

Re-map I/O and memory for PCMCIA

CEh

Initialize digitizer and display message.

D2h

Unknown interrupt
The following are for boot block in Flash ROM

E0h

Initialize the chipset

E1h

Initialize the bridge

E2h

Initialize the CPU

E3h

Initialize the system timer

E4h

Initialize system I/O

E5h

Check force recovery boot

E6h

Checksum BIOS ROM

E7h

Go to BIOS

E8h

Set Huge Segment

E9h

Initialize Multi Processor

EAh

Initialize OEM special code

EBh

Initialize PIC and DMA

ECh

Initialize Memory type

EDh

Initialize Memory size

EEh

Shadow Boot Block

EFh

System memory test

F0h

Initialize interrupt vectors

F1h

Initialize Run Time Clock

F2h

Initialize video

F3h
F4h

Initialize System Management Mode
1

Output one beep

F5h

Clear Huge Segment

F6h

Boot to Mini DOS

F7h

Boot to Full DOS

Chapter 4

103

Index of Symptom-to-FRU Error Message
LCD-Related Symptoms
Symptom / Error
LCD backlight doesn't work

Action in Sequence
First, plug a monitor to CRT port. Next, enter BIOS utility to running
“Load Default Settings” then reboot the system.
Reconnect the LCD connectors.
Keyboard (if the brightness function key doesn't work).
LCD cable
LCD inverter
LCD
Main board

LCD is too dark
LCD brightness cannot be adjusted

Enter BIOS Utility to execute “Load Setup Default Settings”, then
reboot system.
Reconnect the LCD connectors.
Keyboard (if the brightness function key doesn't work).
LCD cable
LCD inverter
LCD
Main board

Unreadable LCD screen

Reconnect the LCD cable

Missing pels in characters

LCD cable

Abnormal screen

LCD

Wrong color displayed

Main board

LCD has extra horizontal or vertical lines
displayed.

Indicator-Related Symptoms
Symptom / Error

Action in Sequence

Indicator incorrectly remains off or on, but system
runs correctly

Main board

HDD/CD-ROM active indicators cannot work

HDD/CD-ROM drive
Device driver
Main board

Power-Related Symptoms
Symptom / Error
Power shuts down during operation

Action in Sequence
Power source (battery pack and power adapter). See “Power
System Check” on page 95.
Battery pack
AC adapter
See if the thermal module is overheat (Heat sink or fan).
Main board

The system cannot power-on.

Power source (battery pack and power adapter). See “Power
System Check” on page 95.
Battery pack
Power adapter
CPU
Main board

The system cannot power-off.

In Windows XP operating system, hold and press the power switch
for more than 4 seconds. If the system can power off, then the main
board is OK. Verify OS in the HDD.
Main board

104

Chapter 4

Power-Related Symptoms
Symptom / Error
Battery can’t be charged or discharged

Action in Sequence
See “Check the Battery Pack” on page 96.
Battery pack
Main board

System hang during POST

ODD/HDD/FDD/RAM module
Main board

PCMCIA-Related Symptoms
Symptom / Error
System cannot detect the PC Card (PCMCIA)

Action in Sequence
PCMCIA slot assembly
Main board

PCMCIA slot pin is damaged.

PCMCIA slot assembly

PC Card cannot be inserted or ejected

Check if the PCMCIA slot is blocked
Main board

Memory-Related Symptoms
Symptom / Error
Memory count (size) appears different from
actual size.

Action in Sequence
Enter BIOS Setup Utility to execute “Load Default Settings” then
reboot system.
RAM module
Main board
Check BIOS revision

System can power on, but you hear two long
beeps: “B--, B--” and the LCD is blank.

Reinsert DIMM
DIMM
Main board

Speaker-Related Symptoms
Symptom / Error
In Windows, multimedia programs, no sound
comes from the computer.

Action in Sequence
OS volume control
Audio driver
Speaker
Main board

Internal speakers make noise or emit no sound.

Speaker
Main board

Microphone cannot work

Audio driver
Volume control in Windows XP
Main board

Power Management-Related Symptoms
Symptom / Error
The system will not enter hibernation mode

Action in Sequence
Power option in Windows XP
Hard disk drive
Main board

The system doesn’t enter standby mode after
closing the lid of the portable computer.

Driver of Power Option Properties
Lid close switch in upper case
Main board

Chapter 4

105

Power Management-Related Symptoms
Symptom / Error
The system doesn't resume from hibernation/
standby mode.

Action in Sequence
Connect AC adapter then check if the system resumes from
Standby/Hibernation mode.
Check if the battery is low.
Hard disk drive
Main board

The system doesn't resume from standby mode
after opening the lid of the portable computer.

LCD cover switch

Battery fuel gauge in Windows doesn’t go higher
than 90%.

Refresh battery (continue use battery until power off, then charge
battery).

Main board

Battery pack
Main board
System hangs intermittently.

Reconnect hard disk/CD-ROM drives.
Main board

Peripheral-Related Symptoms
Symptom / Error
System configuration does not match the
installed devices.

Action in Sequence
Enter BIOS Setup Utility to execute “Load Setup defaults”, then
reboot system.
Reconnect hard disk/CD-ROM drives/FDD or other peripherals.
Main board

External display does not work correctly.

Press Fn+F5, LCD/CRT/Both display switching
Keyboard
Main board

USB does not work correctly

Main board

Print problems.

Enter BIOS Setup Utility to execute “Load Default Settings” then
reboot the system.
Run printer self-test.
Printer driver
Printer cable
Printer
Main board

Parallel port device problems

Enter BIOS Setup Utility to execute “Load Default Settings” then
reboot the system.
Device driver
Device cable
Device
Main board

Keyboard/Touchpad-Related Symptoms
Symptom / Error
Keyboard (one or more keys) does not work.

Action in Sequence
Reconnect the keyboard cable.
Keyboard
Main board

Touchpad does not work.

Reconnect touchpad cable.
Touchpad board
Main board

106

Chapter 4

Modem/LAN-Related Symptoms
Symptom / Error
Internal modem does not work correctly.

Action in Sequence
Phone cable
Driver
Reconnect the Internal modem cable to the main board tightly.
Main board

Internal LAN does not work correctly

Lan cable
Driver
Main board

NOTE: If you cannot find a symptom or an error in this list and the problem remains, see “Undetermined
Problems” on page 109.

Chapter 4

107

Intermittent Problems
Intermittent system hang problems can be caused by a variety of reasons that have nothing to do with a
hardware defect, such as: cosmic radiation, electrostatic discharge, or software errors. FRU replacement
should be considered only when a recurring problem exists.
When analyzing an intermittent problem, do the following:

108

Run the diagnostic test for the system board in loop mode at least 10 times.

If no error is detected, do not replace any FRU.

If any error is detected, replace the FRU. Rerun the test to verify that there are no more errors.

Chapter 4

Undetermined Problems
The diagnostic problems does not identify which adapter or device failed, which installed devices are incorrect,
whether a short circuit is suspected, or whether the system is inoperative.
Follow these procedures to isolate the failing FRU (do not isolate non-defective FRU).
NOTE: Verify that all attached devices are supported by the computer.
NOTE: Verify that the power supply being used at the time of the failure is operating correctly. (See “Power
System Check” on page 95):
1.

Power-off the computer.

Visually check them for damage. If any problems are found, replace the FRU.

Remove or disconnect all of the following devices:
T

Non-Acer devices

Printer, mouse, and other external devices

Battery pack

Hard disk drive

DIMM

PC Cards

Power-on the computer.

Determine if the problem has changed.

If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU.

If the problem remains, replace the following FRU one at a time. Do not replace a non-defective FRU:

Chapter 4

System board

LCD assembly

109

Chapter 5

Jumper and Connector Locations
Top View

DO31

DO2:

DO29

DO32
QK5
V35

DO33

DO34

V41

DO35

V45

V44
V45

DO35
DO37

DO36

V44
V54

DO39

DO3:
DO43
DO45

V55

DO41
DO44

DO52
DO49

DO47
DO48

DO53
TX:

Item

V5:
DO28

TX21

Description

Item

Description

CN18

RJ45 connector

CN19

DVI connector

CN20

Docking connector

PJ4

DC wire connector

Chapter 5

110

Item

111

Description

Item

Description

CN21

Mini card connector

CN23

Main battery connector

CN24

ODD fix connector

CN25

ODD media connector

CN29

Sub-battery/HDD connector

CN27

Mini PCI connector

CN32

CIR wire connector

CN34

Bluetooth wire connector

CN41

PATA HDD connector

CN41

SATA HDD connector

CN36

DDR connector

CN37

DDR connector

CN39

2nd fan connector

CN42

Mini 1394 connector

CN38

PCMCIA connector

CN33

USB connector

CN30

USB connector

CN28

S-Video connector

CN26

Main fan connector

CN24

CPU socket

CN22

CRT connector

U44

CPU

U34

VGA

U30

VGA RAM

U33

VGA RAM

U34

LAN chip

U49

South bridge

U43

North bridge

U24

LAN transformer

SW9

Wireless switch connector

SW10

Bluetooth switch connector

Chapter 5

Bottom View
TX7

TX8

TX9

TX5

TX6
V8

DO8

DO6

DO7
V7

V21
DO9

DO:

DO21
DO3:

DO23
DO24

DO26

Item

Description

Item

Description

CN5

LID wire connector

CN6

LCD wire connector

CN7

CCD wire connector

CN29

Express card connector

CN15

3 in 1 connector

CN13

USB FFC connector

CN12

MDC connector

CN10

Touchpad board FFC connector

CN9

MIC wire connector

CN8

Keyboard connector

VGA RAM

U10

VGA RAM

BIOS ROM

SW6

Quick switch

SW7

Quick switch

SW8

IE switch

SW4

E-mail switch

SW5

Power switch

Chapter 5

112

Chapter 6

FRU (Field Replaceable Unit) List
This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of Aspire 5670
Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).
Please also note that there are some common parts for Aspire 5620, TravelMate 4210/4270/4670
Please note that WHEN ORDERING FRU PARTS, you should check the most up-to-date information
available on your regional web or channel. For whatever reasons a part number change is made, it
will not be noted on the printed Service Guide. For ACER AUTHORIZED SERVICE PROVIDERS,
your Acer office may have a DIFFERENT part number code from those given in the FRU list of this
printed Service Guide. You MUST use the local FRU list provided by your regional Acer office to
order FRU parts for repair and service of customer machines.
NOTE: To scrap or to return the defective parts, you should follow the local government ordinance or
regulations on how to dispose it properly, or follow the rules set by your regional Acer office on how to
return it.
NOTE: Please visit website http://aicsl.acer.com.tw/spl/ for the up to date SPL

Chapter 6

113

Exploded Diagram

114

Chapter 6

Item

Description

Item

Description

LCD bezel

21-4

Heatsink cover w/ DVI

LCD hinge-left

21-5

Heatsink cover w/ TV

LCD hinge-right

Screw M2.5*6-I(BNI)(NYLOK)

LCD cover

Screw M2.5*5.0-I(NI)(NYLOK)

CCD module

Screw M2.0*3.0-I-NI-NYLOK

CCD cover

FIR/CIR PCB

Middle cover

ODD bracket

Keyboard

LCD cable

Upper case

Touchpad board to mainboard
cable

Battery

CIR cable

Mainboard

RJ11 cable

VGA support

Bluetooth cable

CPU support

USB cable

Heatsink module

TV cable

Lower case

ODD module

USB module

HDD module

HDD bracket

Bluetooth bracket

Heatsink cover

21-2

Hearsink cover w/ docking, DVI

21-3

Heatsink cover w/ TV, DVI

Chapter 6

115

Item
1

116

Part Name

Item

Part Name

15.4” w/ CCD LCD cover(Aspire)

Conductive tape EP

ACER logo(Aspire)

LCD cover protect sheet

15.4” wide w/ CCD LCD knob

LCD CCD cover mylar

15.4” wide w/ CCD LCD latch

CCD cover protect

CCD latch BK-L

CCD cover

CCD latch BK-R

CCD bezel

LCD spring

CCD LED lens

15.4 w/ CCD cover shield

CCD name plate assy

screw M2.5*3.0-I(BNIXNYLOK)EP

CCD hinge

screw M2.0*3.0-I(NIXNYLOK)

camera V-UBDOEM1(CMOS module,
1.3M)

CCD cable maylar

LCD rubber-1

cable assy CCD (5P/4P/R2A) L-F

CCD bezel rotect

Chapter 6

Aspire 5670 Part List

PHOTO

PARTNAME

DESCRIPTION

ACER PART
NO.

ADAPTER
N/A

ADAPTER 90W 3 PIN DELTA ADP- ZB1 ADP 19V Delta S/P
90SB BBAHF ROHS

AP.09001.005

ADAPTER 90W 3 PIN LITEON PA1900-04QB ROHS

ZB1 ADP 19V Lite-on S/P

AP.09003.009

“BATTER SONY LI LIP4084QUPC
SY6(ZL5,4S1P,2.0A)LF”

ZB1 BAT(Lite-on 4 cell w/Sony
pack) S/P

“BATTERY PACK SANYO LI
4CELL2.0 (4UR18650Y-QC219
4S1P,2.0A) ROHS “

ZB1 SANYO 4CELL 2.0 (W/
Sony) S/P

“BATTERY PACK SANYO LI
8CELLl2.4 4.8Ah (4UR18650F-2QC218,4S2P) ROHS”

ZB1 LITE ON 8CELL 4.4A S/P

MODEM BOARD

ZB1 MODEM 56K(MDC) EU S/ 54.AA7V7.001
P

BATTERY

BLUETOOTH MODULE
FOXCONN T60H928.00 LF

Chapter 6

BT.00803.014

54.AA7V7.002

KI.GLN01.003

MINI PCI WIRELESS BOARD
802.11 A/B/G ROW INTEL
MM874511

ZB1 WLAN
3945ABG(WM3945ABGM2GE
N) S/P

MINI PCI WIRELESS BOARD
802.11 A/B/G MOW1 INTEL
MM872612

KI.GLN01.001
ZB1 WLAN
3945ABG(WM3945ABGMOW1
) S/P

MINI PCI WIRELESS BOARD
802.11 A/B/G MOW2 INTEL
MM872659

KI.GLN01.002
WLAN
3945ABG(WM3945ABGMOW2
) S/P

TOUCHPAD BOARD W/AUDIO
PORT

ZB1 TP&AUDIO BOARD ASSY
S/P

55.AA7V7.001

117

PHOTO

PARTNAME

DESCRIPTION

ACER PART
NO.

USB BOARD

ZB1 USB BOARD ASSY S/P

55.AA7V7.002

SWITCH BOARD

ZB1 SWITCH BOARD ASSY
S/P

55.AA7V7.003

FIR BOARD

ZB1 FIR BOARD ASSY S/P

55.AA7V7.004

DIGITAL LIGHT DEVICE
N/A

CCD MODULE W/CABLE

57.AA7V7.001

CABLE
N/A

POWER CORD US 3PIN ROHS

ZB1 PWR CORD US S/P

POWER CORD EU 3 PIN ROHS

ZB1 PWR CORD (CEE) S/P

POWER CORD UK 3 PIN ROHS
POWER CORD ITALIAN 3 PIN
ROHS
POWER CORD DANISH 3 PIN
ROHS
POWER CORD SWISS 3 PIN
ROHS
POWER CORD PRC 3 PIN ROHS
POWER CORD US-110V (BSMI)
ROHS
POWER CORD AU W/LABEL 3
PIN ROHS
POWER CORD AF 3 PIN ROHS
POWER CORD AF-S INDIA ROHS
POWER CORD KOERA 2PIN
ROHS
POWER CORD (JAPANESE)
ROHS
POWER CORD ISRAEL 3 PIN
ROHS

118

Chapter 6

PHOTO

N/A
N/A

Chapter 6

PARTNAME

DESCRIPTION

ACER PART
NO.

MODEM CABLE

ZB1 MODEM CABLE S/P

50.AA7V7.001

BLUETOOTH CABLE

ZB1 BLUETOOTH CABLE S/P

50.AA7V7.002

FFC CABLE - TP TO MB

ZB1 CABLE TP/MB FFC S/P

50.AA7V7.003

FFC CABLE - TP TO TP BOARD

ZB1 CABLE TP/B FFC S/P

50.AA7V7.004

PFC CABLE - USB

ZB1 CABLE ASSY USB S/P

50.AA7V7.005

FIR/CIR WIRE CABLE

ZB1 CABLE ASSY CIR S/P

50.AA7V7.006

DC IN CABLE

ZB1 CABLE ASSY DC
POWER S/P

50.AA7V7.007

SWITHCH/AUDIO CABLE

ZB1 CABLE AUDIO FFC S/P

50.AA7V7.008

CABLE ASSY ZB1 TV-TUNER

ZB1 CABLE ASSY TV-TUNER
S/P

119

PHOTO
N/A

PARTNAME
CABLE ASSY ZB1 TV/B

DESCRIPTION

ACER PART
NO.

ZB1 CABLE ASSY TV/B S/P

CASE/COVER/BRACKET ASSEMBLY

120

MIDDLE COVER

ZB1 AS K/B COVER ASSY S/P 42.AA7V7.001

“UPPER CASE W/TP,TP
CABLE,MIC,LID CABLE W/O TV”

ZB1 AS TOP ASSY W/O TV S/
P

60.AA7V7.001

“LOWER CASE W/READER
COVER,NEW CARD COVER, DC
CABLE, SPEAKER”

ZB1 BASE ASSY W/O MEDIA
BAY S/P

60.AA7V7.002

HEATSINK COVER W/DVI W/O
DUCKING

ZB1 HS COVER ASSY W-DVI
S/P

42.AA7V7.001

BLUETOOTH BRACKET

ZB1 BLUETOOTH HOLDER S/ 33.AA7V7.001
P

DUMMY CARD

ZB1 CARDBUS DUMMY
CARD S/P

42.AA7V7.011

Chapter 6

PHOTO

PARTNAME
CARD READER COVER

DESCRIPTION
ZB1 CARD READER COVER
S/P

ACER PART
NO.
42.AA7V7.012

CPU/PROCESSOR
N/A

CPU INTEL YONAH CORE DUO
FSB-667 1.66G 2M L8VR

KC.23001.DTP

CPU INTEL YONAH CORE DUO
FSB-667 1.83G 2M L8VQ

KC.24001.DTP

CPU INTEL YONAH CORE DUO
FSB-667 2.0G 2M L8VP

KC.25001.DTP

CPU INTEL YONAH CORE DUO
FSB-667 2.16G 2M L8VN

KC.26001.DTP

DVD RW DRIVE

DVD SUPER MULTI MODULE
PANASONIC UJ-845 SLOT IN

6M.AA7V7.001

DVD RW DRIVE

DVD SUPER MULTI PANASONIC
UJ-845 DL SLOT IN LF

KU.00807.029

DVD RW/COMBO DRIVE

OPTICAL DEVICE HOLDER FIX

ZB1 ODD HOLDER FIX S/P

42.AA7V7.002

N/A

SUPER MULTI BEZEL
PANASONIC SLOT IN

42.AA7V7.003

DVD RW DRIVE

DVD DUAL MODULE PIONEER
DVR-K06RA SLOT IN

6M.AA7V7.002

DVD RW DRIVE

DVD SUPER MULTI PIONEER
DVR-K06RA DL SLOT IN LF

KU.00805.027

CASE/COVER/BRACKET
ASSEMBLY

OPTICAL DEVICE HOLDER FIX

CASE/COVER/BRACKET
ASSEMBLY

SUPER MULTI BEZEL PIONEER
SLOT IN

COMBO DRIVE

DVD/CDRW COMBO MODULE
24X PHILIPS SCB5265

ZB1 COMBO MODULE
(SCB5265) F/W:TX07 S/P

TBA

COMBO DRIVE

CDRW/DVD COMBO MODULE
24X PHILIPS SCB5265 W/O
BEZEL

ZB1 COMBO (SCB5265) F/
W:TX07 LF S/P

KO.02403.007

CASE/COVER/BRACKET
ASSEMBLY

OPTICAL DEVICE HOLDER FIX

ZB1 ODD HOLDER FIX S/P

42.AA7V7.002

CASE/COVER/BRACKET
ASSEMBLY

DVD COMBO G BASE BEZEL

ZB1 ODD BEZEL ASSY G/B S/ 42.AA7V7.005
P

DVD RW DRIVE

DVD DUAL MODULE PIONEER
DVR-K16RA F/W:1.11

ZB1 DUAL MODULE DVRK16RA F/W:1.11S/P

TBA

DVD RW DRIVE

DVD DUAL PIONEER DVR-K16RA
F/W:1.11 LF

ZB1 DUAL DVDRW DVRK16RA F/W:1.11S/P

TBA

Chapter 6

ZB1 ODD HOLDER FIX S/P

42.AA7V7.002
42.AA7V7.004

121

PHOTO

PARTNAME

DESCRIPTION

ACER PART
NO.

CASE/COVER/BRACKET
ASSEMBLY

OPTICAL DEVICE HOLDER FIX

ZB1 ODD HOLDER FIX S/P

42.AA7V7.002

CASE/COVER/BRACKET
ASSEMBLY

DVD DUAL G BASE BEZEL

ZB1 ODD PIONEER BEZEL
ASSY G/B S/P

42.AA7V7.006

DVD RW DRIVE

DVD SUPER MULTI MODULE
HLDS GSA-4082N LF

ZB1 DVD SUP MODULE DL4X
GSA-4082N S/P

TBA

DVD RW DRIVE

DVD SUPER MULTI HLDS GSA4082N LF

ZB1 DVD SUPER MULTI DL4X
GSA-4082N S/P

TBA

CASE/COVER/BRACKET
ASSEMBLY

OPTICAL DEVICE HOLDER FIX

ZB1 ODD HOLDER FIX S/P

42.AA7V7.002

CASE/COVER/BRACKET
ASSEMBLY

DVD SUPER MULTI G BASE
BEZEL

ZB1 ODD BEZEL ASSY G/B
SUPER MULTI S/P

42.AA7V7.007

HDD 80G SEAGATE 5.4K
SATAST98823AS MERCURY 2
FW:3.06 LF

80G SEAGATE 2.5 IN.
5400RPM SATAST98823AS
LF MERCURY 2 FW:3.06

KH.08001.023

“HDD 80G HGST 5.4K SATA 1.5G
NCQ
MORAGA+HTS541080G9SA00,C6
0D”

“80G HGST 2.5 IN. 5.4K SATA
1.5G NCQ
MORAGA+HTS541080G9SA0
0,C60D”

KH.08007.015

HDD 100G SEAGATE 5.4K SATA
ST9100824AS MERCURY 2
FW:3.06 LF

100G SEAGATE 2.5 IN.
5400RPM SATA ST9100824AS
LF MERCURY 2 FW:3.06

KH.10001.008

HDD 100G TOSHIBA SATA 5.4K
ARES-B_S MK1032GSX F/W
AS021G

100G TOSHIBA 2.5 IN. SATA
5400RPM ARES-B_S
MK1032GSX F/W AS021G

KH.10004.003

HARD DISK DRIVE

KH.10007.005
100G HGST 2.5 IN. SATA
HDD 100G HGST SATA 1.5G
NCQMORAGA+HTS541010G9SA0 1.5G
NCQMORAGA+HTS541010G9
0 FW:S60D
SA00 FW:S60D
HDD 120G SEAGATE 5.4K SATA
ST9120821AS LF MERCURY 2
FW:3.06

120G SEAGATE 2.5 IN.
5400RPM SATA ST9120821AS
LF MERCURY 2 FW:3.06

KH.12001.025

HDD 120G TOSHIBA 5.4K
SATAI1.5G W/NCQ MK1234GSX
LF TAURUS FW:AH001A

120G TOSHIBA 2.5 IN. 5.4K
SATAI1.5G W/NCQ
MK1234GSX LF TAURUS
FW:AH001A

KH.12004.003

HDD BRACKET

HDD COVER W/RUBBER

122

33.AA7V7.002

ZB1 HDD COVER ASSY W/O
COUSION S/P

42.AA7V7.008

Chapter 6

PHOTO

PARTNAME

DESCRIPTION

ACER PART
NO.

KEYBOARD AS DARFON TC
CHINESE

ZB1 K/B (TAIWAN) API S/P

KB.ASP07.070

KEYBOARD AS DARFON US
INTERNATIONAL

ZB1 K/B (UI) API S/P

KB.ASP07.071

KEYBOARD AS DARFON
THAILAND

ZB1 K/B (THAI) API S/P

KB.ASP07.072

KEYBOARD AS DARFON
GERMAN

ZB1 K/B (GERMAN) API S/P

KB.ASP07.073

KEYBOARD AS DARFON UK

ZB1 K/B (UK) API S/P

KB.ASP07.074

KEYBOARD AS DARFON ITALY

ZB1 K/B (ITALIAN) API S/P

KB.ASP07.075

KEYBOARD AS DARFON
FRENCH

ZB1 K/B (FRENCH) API S/P

KB.ASP07.076

KEYBOARD AS DARFON SWISS/
G

ZB1 K/B (SWISS) API S/P

KB.ASP07.077

KEYBOARD AS DARFON
BELGIUM

ZB1 K/B (BELGIUM) API S/P

KB.ASP07.078

KEYBOARD AS DARFON
SPANISH

ZB1 K/B (SPANISH) API S/P

KB.ASP07.079

KEYBOARD AS DARFON
PORTUGUEES

ZB1 K/B (PORTU) API S/P

KB.ASP07.080

KEYBOARD AS DARFON CZECH

ZB1 K/B (CZECH) API S/P

KB.ASP07.081

KEYBOARD AS DARFON
HUNGARY

ZB1 K/B (HUNG) API S/P

KB.ASP07.082

KEYBOARD AS DARFON
RUSSIAN

ZB1 K/B (RUSSIAN) API S/P

KB.ASP07.083

KEYBOARD AS DARFON
SWEDEN

ZB1 K/B (SWEDISH) API S/P

KB.ASP07.084

KEYBOARD AS DARFON
NORWAY

ZB1 K/B (NORW) API S/P

KB.ASP07.085

KEYBOARD AS DARFON DANISH ZB1 K/B (DANISH) API S/P

KB.ASP07.086

KEYBOARD AS DARFON ARABIC

ZB1 K/B (ARAB-EN) API S/P

KB.ASP07.087

KEYBOARD AS DARFON
BRAZILIAN PROTUGESE

ZB1 K/B (BRAZIL) API S/P

KB.ASP07.088

KEYBOARD AS DARFON
CANADIAN FRENCH

ZB1 K/B (FRA-CAN) API S/P

KB.ASP07.089

KEYBOARD AS DARFON GREEK

ZB1 K/B (GREEK) API S/P

KB.ASP07.090

KEYBOARD AS DARFON
TURKISH

ZB1 K/B (TURKISH) API S/P

KB.ASP07.091

KEYBOARD AS DARFON
TURKEY 1

ZB1 K/B (TURKEY)1 API S/P

KEYBOARD AS DARFON
HEBREW

ZB1 K/B (HEBREW) API S/P

KEYBOARD AS DARFON
POLAND

ZB1 K/B (POLAND) API S/P

KB.ASP07.092

KEYBOARD AS DARFON SLOVAK ZB1 K/B (SLOVAK) API S/P

Chapter 6

KEYBOARD AS DARFON CHINA

ZB1 K/B (CHINA) API S/P

KEYBOARD AS DARFON DUTCH

ZB1 K/B (DUTCH) API S/P

KEYBOARD AS DARFON LA

ZB1 K/B (LA) API S/P

KEYBOARD AS DARFON US

ZB1 K/B (USA) API S/P

KEYBOARD AS DARFON
ICELAND

ZB1 K/B (ICELAND) API S/P

123

PHOTO

124

PARTNAME

DESCRIPTION

ACER PART
NO.

ASSY LCD MODULE 15.4 IN.
WXGA GLARE W/ANTENNA CCD
MODULE

ZB1 LCD ATI QDI(15.4
WXGAG) AS W/CCD S/P

6M.AA7V7.011

LCD 15.4 IN. WXGA QDI
QD15TL07-02 GLARE LF

ZB1 LCD15.4QDI15TL02
REV.04 (G) S/P

LK.15409.009

LCD 15.4 IN. WXGA CMO N154I1L0C GLARE LF

ZB1 LCD 15.4(WXGA)N154I1LOC B/S LF S/P

LK.1540D.006

LCD INVERTER BOARD

ZB1 INV MODULE S/P

19.AA7V7.001

LCD CABLE - 15.4 IN.

ZB1 CABLE ASSY S/P

50.AA7V7.011

CASE/COVER/BRACKET
ASSEMBLY

LCD COVER - 15.4 IN. W/
ANTENNA CCD MODULE

“ZB1 AS 15.4”” LCD COVER
ASSY W/CCD S/P”

60.AA7V7.003

CASE/COVER/BRACKET
ASSEMBLY

LCD BEZEL - 15.4 IN. FOR CCD

“ZB1 15.4”” LCD BEZEL ASSY
W/CCD S/P”

60.AA7V7.004

LCD BRACKET W/HINGE - L

“ZB1 15.4”” HINGE-L ASSY S/
P”

33.AA7V7.003

LCD BRACKET W/HINGE - R

“ZB1 15.4”” HINGE-R ASSY S/
P”

33.AA7V7.004

Chapter 6

PHOTO

Chapter 6

PARTNAME

DESCRIPTION

ACER PART
NO.

ASSY LCD MODULE 15.4 IN.
WXGA GLARE W/ANTENNA

ZB1 LCD ATI QDI(15.4 WXGA
G) AS S/P

6M.AA7V7.012

LCD 15.4 IN. WXGA QDI
QD15TL07-02 GLARE LF

ZB1 LCD15.4QDI15TL02
REV.04 (G) S/P

LK.15409.009

LCD 15.4 IN. WXGA CMO N154I1L0C GLARE LF

ZB1 LCD 15.4(WXGA)N154I1LOC B/S LF S/P

LK.1540D.006

LCD INVERTER BOARD

ZB1 INV MODULE S/P

19.AA7V7.001

LCD CABLE - 15.4 IN.

ZB1 CABLE ASSY S/P

50.AA7V7.011

LCD COVER - 15.4 IN. W/
ANTENNA

“ZB1 AS 15.4”” LCD COVER
ASSY S/P”

60.AA7V7.005

LCD BEZEL - 15.4 IN. UV

“ZB1 15.4”” LCD BEZEL ASSY
W-UV S/P”

60.AA7V7.004

LCD BRACKET W/HINGE - L

“ZB1 15.4”” HINGE-L ASSY S/
P”

33.AA7V7.003

125

PHOTO

PARTNAME

DESCRIPTION

LCD BRACKET W/HINGE - R

“ZB1 15.4”” HINGE-R ASSY S/
P”

33.AA7V7.004

MAINBOARD 945PM M54P128
GLAN SATA NO-TV W/READER
W/O CPU MEMORY

ZB1J MB ASSY(PM/M54P128/SATA/5789/6IN1)S/P

MB.AA700.001

SO-DIMM DDRII533 256M
HYS64T32000HDL-3.7-A 32X64
LF (0.11u)

KN.25602.023

SO-DIMM DDRII533 256MB
NT256T64UH4A1FN-37B LF

KN.25603.029

SO-DIMM DDRII533 256MB
MT4HTF3264HY-53EB3 LF
(512Mb*4)

KN.25604.027

SO-DIMM DDRII533 256MB
M470T3354CZ3-CD5 LF (Pb-free)

KN.2560B.017

SO-DIMM DDRII533 256MB
HYMP532S64P6-C4 LF

KN.2560G.006

SO-DIMM DDRII 533 512MB
HYS64T64020HDL-3.7-A LF
(0.11u)

KN.51202.021

SO-DIMM DDRII533 512MB
NT512T64UH8A1FN-37B LF

ZB1 RAM(512M)DDR2 NANYA
S/P

SO-DIMM DDRII533 512MB
M470T6554CZ3-CD500 LF
SO-DIMM DDRII533 512MB
HYMP564S64P6-C4 LF

KN.51203.023
KN.5120B.015

ZB1RAM(512M)DDR2 HY S/P

SO-DIMM DDRII533 1GB
NT1GT64UH8A0BN-37B LF

N/A

ACER PART
NO.

KN.5120G.005
KN.1GB03.006

THERMAL MODULE - DISCRETE

ZB1 THERMAL MODULE ATI
ASSY S/P

60.AA7V7.006

THERMAL MODULE - UMA

ZB1 THERMAL MODULE
ASSY(UMA) S/P

60.AA7V7.007

MISCELLANEOUS

126

Chapter 6

PHOTO

PARTNAME

DESCRIPTION

ACER PART
NO.

MISCELLANEOUS

NAME PLATE AS5670

ZB1H NAME PLATE (AS5670)
S/P

40.AA7V7.001

MISCELLANEOUS

RUBBER FOOT - LOWER CASE

ZL1A RUBBER FOOT S.P.

47.T50V7.002

MISCELLANEOUS

RUBBER FOOT - HEATSINK
COVER

ZB1 BASE RUBBER FOOT S/
P

47.AA7V7.001

MISCELLANEOUS

LCD RUBBER PAD-UP

ZL1A RUBBER PAD-UP S.P.

47.AA7V7.002

SPEAKER

SPEAKER SET

ZB1 SPEAKER ASSY S/P

23.AA7V7.001

SCREW

SCREW M2.5*3.5-I(NI)(NYLOK)

ZB1 SCREW M2.5*3.5I(NI)(NYLOK) S/P

86.AAV7.001

SCREW

SCWER M2.5*3.0I(BNI)(NYLOK)EP

ZB1 SCWER M2.5*3.0I(BNI)(NYLOK)EP S/P

86.T25V7.012

SCREW

SCREW M2.0*5.0 I-(BNI)(NYLOK)

ZI1S SCREW M2.0X5.0-I-BNINYLOK S/P

86.T23V7.015

SCREW

SCREW M2.5-0.45*3.5-F(ANTILOOSE)

ZB1 SCREW M2.5-0.45*3.5F(ANTI-LOOSE)S/P

86.AA7V7.002

SCREW

SCREW M2.0*3.0-I-NI-NYLOK

ZI3 LCD LATCH KIT W/O
SPRING S/P-F

SCREW

SCREW M2.5*4-I(BNI)

ZI1S SCREW M2.5X4-I-BNI S/ 86.T23V7.019
P

SCREW

SCREW M2.5*6-I(BNI)(NYLOK)

ZB1 SCREW M2.5*6I(BNI)(NYLOK)S/P

86.A08V7.004

SCREW

SCREW M2.5*6.0-P(NI)(NYLOK)

ZB1 SCREW M2.5*6.0P(NI)(NYLOK)S/P

86.AA7V7.003

SCREW

SCREW M1.7*3.0-I(BK)

ZL1A SCREW (M1.7*3.1-I
(BK) S.P.

86.T50V7.001

SCREW

SCREW M2.5*5.0-I(NI)(NYLOK)

ZB1 SCREW M2.5*5.0I(NI)(NYLOK) S/P

86.T23V7.010

SCREW

SCREW M2.0*5-I(NI)(NYLOK)

ZB1 SCREW M2.0*5I(NI)(NYLOK) S/P

86.T23V7.006

SPEAKER

Chapter 6

127

128

Chapter 6

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:12:23 09:32:20+08:00
Create Date                     : 2005:12:22 16:59:11Z
Page Count                      : 135
Creation Date                   : 2005:12:22 16:59:11Z
Mod Date                        : 2005:12:23 09:32:20+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Candice Sheng
Metadata Date                   : 2005:12:23 09:32:20+08:00
Creator                         : Candice Sheng
Title                           : S.G_TM4670_4270_4210&AS5670_5620_BOOK.fm
Page Mode                       : UseOutlines
Has XFA                         : No

EXIF Metadata provided by EXIF.tools

Acer 4270 Users Manual S.G_TM4670_4270_4210&AS5670_5620_BOOK

Acer Laptop 4270 travelmate 4210 4270 4670 aspire 5620 5670

4670 to the manual 915becdd-9111-4dc0-bae2-ea30f1726da0

Navigation menu

Versions of this User Manual:

Views

Navigation