Aclara Technologies 09002G LLB09002G Meter Transceiver Unit User Manual users manual

Aclara Technologies LLC LLB09002G Meter Transceiver Unit users manual

users manual

ACLARA RF SYSTEMS Former HEXAGRAM, Inc. 30400 Solon Road. Solon, OH 44139 440-528-7200                                                                                                                                                 June 14, 2011   Users Manual  FCC ID: LLB09002G  The LLB09002G has no user adjustment or controls and are installed by factories trained personnel at the manufacturing  facility  .Aclara  RF  Systems,  former  Hexagram  LLB09002G  devices  are  shipped  to  the customer in the sealed LLB09002G enclosures. Thus, NO operational access can be made in the field, without breaking the factory sealed enclosure.  The FCC wants you to know….. This equipment has been tested and complies with Part 15 and Part 90 of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful interference. This equipment generates uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, try to correct the interference by one or more of the following measures: • Reorient or relocate the equipment. • Increase the separation distance between  the  affected  equipment  and  receiver.  •  Consult  Aclara,  Inc.  for  help.  Any  changes  or modifications to this equipment not expressly approved by the Aclara, Inc. could void the authorization to operate the equipment.   FCC RF Exposure Guidelines Aclara’s low power RF devices and their antennas must be fixed-mounted on indoor or outdoor permanent structure(s) providing a separation distance of at least 20 cm from all persons  during  normal  operation.  This  device  is  not  designed  (and  it  has  no  external  connection)  to operate  in  conjunction  with  any  other  antennas  or  transmitters.  No  other  operating  instructions  for satisfying RF exposure compliance are needed. This unit has no user or installer serviceable parts, and requires no field adjustment or calibration. Units are sealed at the factory, and disruption of this seal could void the authorization to operate the equipment.    Sincerely,   Xinhua Gan RF Design Engineer 440-528-7200  xgan@aclara.com

Navigation menu