Aclara Technologies 11001 LLB11001 METER TRANSCEIVER UNIT User Manual

Aclara Technologies LLC LLB11001 METER TRANSCEIVER UNIT Users Manual

Users Manual

ACLARA RF SYSTEMS Former HEXAGRAM, Inc. 30400 Solon Road. Solon, OH 44139 440-528-7200                                                                                                                                       September 22, 2011   Users Manual  FCC ID: LLB11001  The LLB11001 has no user adjustment or controls and are installed by factories trained personnel at the manufacturing  facility  .Aclara  RF  Systems  formally  Hexagram  LLB11001  devices  are  shipped  to  the customer in the  sealed LLB11001 enclosures. Thus,  NO  operational access can be made in the field, without breaking the factory sealed enclosure.  The FCC wants you to know….. This equipment has been tested and complies with Part 15 and Part 90 of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful interference. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, try to correct the interference by one or more of the following measures: • Reorient or relocate the equipment. • Increase the separation distance between  the  affected  equipment  and  receiver.  •  Consult  Hexagram,  Inc.  for  help.  Any  changes  or modifications  to  this  equipment  not  expressly  approved  by  the  Hexagram,  Inc.  could  void  the authorization to operate the equipment.   FCC RF Exposure Guidelines Hexagram’s low  power RF  devices and their antennas  must be fixed-mounted on indoor or outdoor permanent structure(s) providing a separation distance of at least 20 cm from all persons during normal operation. This device is not designed (and it has no external connection) to  operate  in  conjunction  with  any  other  antennas  or  transmitters.  No  other  operating  instructions  for satisfying RF exposure compliance are needed. This unit has no user or installer serviceable parts, and requires no field adjustment or calibration. Units are sealed at the factory, and disruption of this seal could void the authorization to operate the equipment.    Sincerely,   Larry Murphy Director of Engineering 440-528-7200  LMurphy@aclara.com

Navigation menu