Aclara Technologies 11009X3 LLB11009X3 TRANSCEIVER MODULE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1687479
Application ID	4U5XjRFmmTFgzZ8KxNmMzQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.39kB (492318 bits)
Date Submitted	2012-05-01 00:00:00
Date Available	2012-05-01 00:00:00
Creation Date	2012-04-11 15:46:48
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual

ACLARA Technologies LLC
30400 Solon Road.
Solon, OH 44139
440-528-7200
Mar 22“, 2011
Users Manual
FCC ID: LLBi1009X3
The LLB11009X3 has no user adjustment or controls and are installed by factories trained personnel at
the manufacturing facility .Aclara Technologies LLC. LLB11009X3 devices are shipped to the customer
in the sealed LLB11009X3 enclosures. Thus, NO operational access can be made in the field, without
breaking the factory sealed enclosure.
The FCC wants you to know ..... This equipment has been tested and complies with Part 15 and Part 90
of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference, This equipment generates, uses and can radiate radio frequency energy, and, if not installed
and used in accordance with the instructions may cause harmful interference to radio communications
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, try to correct the interference by one or
more of the following measures: - Reorient or relocate the equipment. - Increase the separation distance
between the affected equipment and receiver. - Consult Hexagram, Inc. for help. Any changes or
modifications to this equipment not expressly approved by the Hexagram, Inc. could void the
authorization to operate the equipment.
FCC RF Exposure Guidelines Hexagram’s low power RF devices and their antennas must be fixed-
mounted on indoor or outdoor permanent structure(s) providing a separation distance of at least 20 cm
from all persons during normal operation. This device is not designed (and it has no external connection)
to operate in conjunction with any other antennas or transmitters. No other operating instructions for
satisfying RF exposure compliance are needed. This unit has no user or installer serviceable parts, and
requires no field adjustment or calibration. Units are sealed at the factory, and disruption of this seal could
void the authorization to operate the equipment.
Sincer
Larry Murp
Executive Director of Engineering
440-528-7200
Lmurphy@aclara.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 1
PDF Version                     : 1.4
Create Date                     : 2012:04:11 15:46:48+00:00

EXIF Metadata provided by EXIF.tools