Aclara Technologies 14280 TRANSCEIVER FOR METER READING User Manual MTU Instruction

Download:
Mirror Download [FCC.gov]
Document ID	939454
Application ID	3gs70ThOYmdhHt4yKOA6hw==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.82kB (535220 bits)
Date Submitted	2008-05-09 00:00:00
Date Available	2008-05-15 00:00:00
Creation Date	2006-05-08 09:01:57
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2006-05-08 09:19:08
Document Title	MTU Instruction
Document Creator	Acrobat PDFMaker 7.0 for Word
Document Author:	Hexagram, Inc.

MTU Instruction
for Landis & Gyr Focus Electric Meters
Purpose & Scope
This instruction provides a procedure for installing a STAR Type 10152 MTU in a Landis &
Gyr Focus Family Electric Meter.
Note: This procedure is intended for use by Landis & Gyr personnel in the manufacture
and initial assembly of these meters and is NOT intended for use in field retrofits.
Installation Procedure for Focus Family Meters
Parts Required
for MTU Installation in Focus Family Meters
•
Hexagram MTU – Type 10152
•
Screws (2)
•
Standoffs (2)
471-2024 - 5/8/2006
Page 1
MTU Instruction
for Landis & Gyr Focus Electric Meters
Procedure
Step 1 – Insert the two plastic standoffs
into the holes provided on battery side of
the Type 10152 printed circuit board
assembly as shown.
Step 2a – Turn the MTU over so the
battery side and standoffs are facing
down, and insert the MTU into the back of
the Focus Meter electronics housing as
shown in the photo below.
Page 2
Step 2b – Align the MTU by positioning
the notch in the edge of the MTU around
the plastic tab in the electronics housing
as shown below. Insure that the pins on
the connector linking the two boards are
properly seated.
Step 3 – Insert the screws provided
through the holes on component side of
the Type 10152 printed circuit board
assembly as shown and tighten hand
tight.
MTU Instruction
for Landis & Gyr Focus Electric Meters
Step 4 – Connect the wiring to the meter
base as required for the specific meter
configuration. Two examples are shown
below.
Step 5 – Attach the meter cover to the
base to complete the meter assembly.
Page 3
MTU Instruction
for Landis & Gyr Focus Electric Meters
The FCC wants you to know…..
This equipment has been tested and complies with Part 15 and Part 90 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference. This equipment generates, uses
and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, try to correct the interference by one or more of the following measures:
• Reorient or relocate the equipment.
• Increase the separation distance between the affected equipment and receiver.
• Consult Hexagram, Inc. for help.
Any changes or modifications to this equipment not expressly approved by the Hexagram, Inc. could void
the authorization to operate the equipment.
FCC RF Exposure Guidelines
Hexagram’s low power RF devices and their antennas must be fixed-mounted on indoor or outdoor
permanent structure(s) providing a separation distance of at least 20 cm from all persons during normal
operation. This device is not designed (and it has no external connection) to operate in conjunction with any
other antennas or transmitters. No other operating instructions for satisfying RF exposure compliance are
needed. This unit has no user or installer serviceable parts, and requires no field adjustment or calibration.
Units are sealed at the factory, and disruption of this seal could void the authorization to operate the
equipment.
Hexagram, Inc.
23905 Mercantile Road
Cleveland, OH 44122
Page 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Date 0020completed              : D:20060508
Company                         : Hexagram, Inc.
Source Modified                 : D:20060508130110
Category                        : Mounting/Installation
Create Date                     : 2006:05:08 09:01:57-04:00
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Modify Date                     : 2006:05:08 09:19:08-04:00
Metadata Date                   : 2006:05:08 09:19:08-04:00
Document ID                     : uuid:f829021d-b330-408c-8b7f-0d888f4dff2c
Instance ID                     : uuid:96b55fb8-9668-4180-9414-470b71df71f8
Version ID                      : 8
Format                          : application/pdf
Title                           : MTU Instruction
Creator                         : Hexagram, Inc.
Description                     : for Landis & Gyr Focus Electric Meters
Subject                         : 471-2024
Headline                        : for Landis & Gyr Focus Electric Meters
Page Count                      : 4
Page Layout                     : OneColumn
Language                        : EN-US
Author                          : Hexagram, Inc.
Keywords                        : 471-2024
Date Completed                  : D:20060508

EXIF Metadata provided by EXIF.tools