Acoustic Arc AAI-AS0850-00 900 MHz Floating wireless speaker User Manual as0850 ok

Download:
Mirror Download [FCC.gov]
Document ID	938974
Application ID	m6FshYevHoQKLrkc1w6NUA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.98kB (524743 bits)
Date Submitted	2008-05-08 00:00:00
Date Available	2008-05-08 00:00:00
Creation Date	2008-05-06 17:44:59
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2008-05-06 17:45:33
Document Title	Microsoft Word - user manual as0850-ok.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	daniel

900 MHz FLOATING
SPEAKER SYSTEM
INSTRUCTION MANUAL
INTRODUCTION
This floating wireless speaker system applies the latest 900 MHz wireless technology that enables you to enjoy
music in your swimming pool.
You can simply connect the portable transmitter with any audio source such as i-
pod,, Hi-Fi and CD/MP3 player or other audio source.
A.
PACKAGING
1.
RF transmitter
2.
Floating speaker..
3.
3.5mm plug to 2 X RCA audio cable
4.
User Manual
B.
FEATURES
1.
900 MHz RF technology
2.
Auto Scan System on speakers
3.
Phase Lock Loop (PLL) transmission system on transmitter
4.
Water-resistant Speaker
5.
Operating distance up to 150 feet.
6.
No line of sight limitation.
7.
ON/OFF control on Transmitter
8.
Auto Shut-Off on Speaker
9.
Mood light effect in the water
C.
1.
COMPONENT IDENTIFICATION
TRANSMITTER
Power/Signal indicator
(Green/Blue)
2.
SPEAKER
D.
1.
A.
B.
INSTALLATION
TRANSMITTER
Insert 4x X “AA” size ALKALINE batteries into the battery compartment at the bottom of the transmitter with
correct polarity.
The rear of the transmitter has one audio cord that can be connected to audio output jack of TV, i-pod,
DVD, and CD/MP3 players or to headphone/earphone jack with the connector provided.
Battery Compartment
Turn the switch to On and the LED of transmitter will light up in Green. When the audio cable connection is
finished and turn on the audio source, the LED will turn from Green to Blue.
2.
SPEAKER
Insert 6x AA’ size ALKALINE batteries into the battery compartment with correct polarity at the
bottom of the speaker.
Screw up the battery door and make sure it is tightly close without any gap.
3.
Press Power button and turn the speaker ON and the Power LED will light up in Green. When the signal
link is established between transmitter and speaker, the LED on speaker will change to Blue.
E.
OPERATION
1. Turn on the transmitter and the LED will light up in Green.
2. Turn on the audio source (TV or audio component) to which the transmitter is connected with. The LED will
change from Green to Blue.
3. Select the channel 1, 2 or 3 of the transmitter for best performance in your location.
4. Turn on the Power button on the speaker and adjust the volume by pressing “+” and “-“ for desired listening
level.
5.
REMARK: Screw the battery door at the right direction and make sure it is tightly close without any gap before
throwing to water.
REMARK: Make sure not too much water retention on top of the speaker driver. Turn speaker over and shake it
to let water drill out quicker.
6. Push the “Scan” button to get the best tuning reception in the speaker. When the button is pressed,
frequency tuning starts automatically and it stops when a signal is detected.
7. You should now be able to place the speaker freely in your pool, of which the speaker will be floating in the
water..
SWITCHING OFF
1.
2.
3.
4.
If there is no audio input signal to transmitter in 4 minutes, transmitter will go to standby mode and LED will
change from Blue to Green.
If the audio source is off, the LED on transmitter will change to Green.
Speaker will turn to standby mode if there is no input signal to transmitter and LED will become Green.
Speaker will automatically shut off when standby mode continues for 5 minutes.
At standby mode, speaker will turn to On automatically after getting signal from transmitter.
OTHER CONTROL
1. Select volume up and down on Speaker.
2. Select Light button to turn on the mood light effect in the water.
3. If you hear interference from other components, re-adjust the tuning control by moving channel knob to 1, 2
or 3 of the transmitter, then pressing “Scan” button on speaker or remote unit for best reception.
F.
TROUBLE SHOOTING
NO SOUND
Too much water retention inside the speaker grill. Turn it over and shake it to let water drill out.
Ensure batteries are with power for both transmitter and receiver.
Speaker’s or/and transmitter’s battery capacity is too low, sound distortion will be heard, and replace
with new batteries.
Ensure the audio component is ON.
The connected audio equipment is not playing. Start playing the equipment.
The volume of speaker is too low, adjust the volume to an appropriate level.
DISTORTED
Too much water retention inside the speaker grill. Turn it over and shake it to let water drill out.
Press the “Scan” button on the speaker until matching the frequency of the transmitter.
Change the position of the channel selector on the transmitter. You must then press the “Scan”
button on the speakers.
Battery capacity is too low. Replace with the new batteries.
Ensure the volume level of speakers is adjusted properly.
The speaker is too far from transmitter, move closer.
The input level of the audio signal is too low. Turn up the volume of the audio source equipment.
G.
TECHNICAL SPECIFICATIONS
Transmission Mode
Carrier Frequency
Operation Voltage
Frequency Response
Distortion
S/N Ratio
Operation Distance
Output Power
UHF stereo
900 MHz
Transmitter, 4 X “AA” size Alkaline batteries (not
included)
Speaker, 6 X “AA” size Alkaline batteries (not
included)
40Hz – 12KHz
1.5%
65dB (typical)
Up to 150feet
3W (Max)
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 8
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:7fbfec17-949f-4cbb-8b6d-19af6ddb1e5d
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2008:05:06 17:44:59-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:05:06 17:45:33-07:00
Metadata Date                   : 2008:05:06 17:45:33-07:00
Document ID                     : uuid:3459eeb3-1391-4f98-9bcb-25f69e3a2227
Format                          : application/pdf
Creator                         : daniel
Title                           : Microsoft Word - user manual as0850-ok.doc
Author                          : daniel

EXIF Metadata provided by EXIF.tools