Acoustic Arc AAI-BT1130C-0 Bluetooth Speaker User Manual

Acoustic Arc International Ltd. Bluetooth Speaker

User manual

Instruction ManualMODEL: BT1130CUS/ BT1140CUS Bluetooth Speaker
This Bluetooth wireless speaker system applies the latest BT 2.1 wireless technology platform that enables you to enjoy music, video and cell phonehandsfree calling everywhere you want. 1. Power On/O Control2. Battery Check / Bluetooth Pair Button3. Power LED Indicators4. Battery charging LED Indicator5. 3.5mm Audio input jack6. Micro USB charge input jack7. Telephone call button8. Volume +9. Volume –10. USB Charging out jack(to external portable devices)11. Microphone12. Speaker13. Passive Woofer (located on back panel of unit)1. Bluetooth stereo speaker2. USB to Micro USB charging cable3. 3.5mm to 3.5mm audio cableINTRODUCTION C. COMPONENT IDENTIFICATIONA. PACKAGING1. Bluetooth 2.1 Platform2. A2DP prole3. Handsfree telephone calling4. Stereo music5. Battery status checking6. Operating distance up to 10 meters / 33 feet (open area)7. Charging external cell phones or other electronic devices8. Operation time up to 18 hours (medium volume level)1B. FEATURES2
1. If there is an incoming call when streaming music on the speaker, the music will be muted and ring tone will be heard. 2. Take your call by pressing the talk button. Press once again when ending the call. Music will resume again automatically.3. To make a call, simply dial your cell phone and talk to the speaker.Note: Check the instruction manual for your cell phones, if getting any process dierent from the above.1. Connect the speaker to your audio device directly with the 3.5mm cable provided.2. The Bluetooth wireless music will be by pass after line-in connection is made.1. Make sure the speaker is On.2. Enable your Bluetooth device such as cell phones, tablets or other BT media, and make sure it is in searching mode.3. Press the Pair/Battery Check button and hold for 5 seconds until the 4 LEDs ash.4. Select “BeatsBar” in the list shown in the Bluetooth device. 5. Enter “0000” if password is required.6. When Bluetooth connection is made, the rst LED will ash slowly.7. Listen to your music or make/receive your telephone call on the speaker.1. Make sure the speaker is fully charge before initial use.2. Connect speaker with your PC by the supplied USB to Micro USB cable for charging.3. Charging is workable to connect with other power adapter with USB jack at 5V 1A specications.4. The charging LED will illuminate in Red when charging . Charging is nished when LED turns Green.F. TELEPHONE CALLG. LINE-IND. PAIRINGE. CHARGING 34
Carrier Frequency : Bluetooth 2.1Battery Capacity : 3.7V 1500mA Frequency Response : 20Hz – 20KHz Distortion : <0.5% S/N Ratio : 65dB (typical)Channel Separation : 50dB (Typical)Operation Distance : Up to 10 meters / 33 feet (open area)Output Power : 2 x 1.5W (Max)NOTES: This speaker is in compliance with the specied Bluetooth version. It does not guarantee compatibility ofall functions on every Bluetooth enabled device. Please check with your mobile phone's user manual for compatibility and functionality.J. TECHNICAL SPECIFICATIONS1. The speaker is designed with a smart battery check feature, so that user knows clearly the battery status of the battery.2. Press the battery check button and note the battery status. a/ 4x LED light up = approx. 100% full b/ 3x LED light up = approx. 75% c/ 2x LED light up = approx. 50% d/ 1x LED light up = approx. 25% (charging is needed)H. BATTERY CHECK1. The speaker has a charging output feature to support your portable devices with back-up power supply.2. Connect your portable devices charging cable to the USB jack on the speaker. *The speaker is designed for charging portable devices with charging current lower than 1A. Charging tablets or other high power portable devices are not recommended.I. CHARGING OUTPUT5 6Carrier Frequency：Bluetooth 2.1（2402-2480MH）Audio Output Power : 2 x 1.5W (Max)
NO SOUND- Ensure the speaker is charged and with enough power for operation- Ensure the speaker is ON.- Ensure BT device is ON.- The volume of speaker is too low, adjust the volume to an appropriate level.- Unable to connect with Bluetooth device, RESET the speaker by pressing and holding the Pair/Battery Check button for 12 seconds.WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: Clean the speaker with soft, lint - free, dry cloth. Never use detergents or abrasive cleaners to clean. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference and(2)this device must accept any interference received, including interference that may cause undesired operation.Important: Changes or modifications to this product not authorized and could void the FCC compliance and negate your authority to operate the product.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.K. TROUBLE SHOOTING L. FCC COMPLIANCE STATEMENT78

Navigation menu