Acrox Technologies KB23 HP 10 G2 Tablet KB Case T1000 User Manual USB 2
Acrox Technologies Co., Ltd. HP 10 G2 Tablet KB Case T1000 USB 2
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2674462 |
| Application ID | QV50kOSQv5wIb6Ym8Dfh5g== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 27.5kB (343742 bits) |
| Date Submitted | 2015-07-10 00:00:00 |
| Date Available | 2015-07-13 00:00:00 |
| Creation Date | 2017-09-24 22:33:40 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-09-24 22:33:40 |
| Document Title | USB 2 |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | tiffany |
K3L Tables Sleeve case with Bluetooth Scissor Keyboard USER'S GUIDE Ver.:1.00 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Bluetooth Keyboard Thank you for your purchasing Bluetooth keyboard .Before you use this product, please read this manual thoroughly and use this product correctly. After you read this manual, please keep it in place and refer to it when necessary. Supplied with the product: The following items are included in the package. Please make sure all items are included as you open the package. If there is any item missing or damaged, please contact the reseller who sold you this product, or our support center. - Bluetooth Keyboard - User’s Guide - Micro USB Charging cable System Requirements: -Android 4.2 (or later) -Running Bluetooth® 4.0 ,3.0, 2.1, 2.0 & 1.1 wireless technology Functional Introduction Installing Hardware Step1: Turn the Tables power to ON, then place keyboard power switch to ON Step2: Start your device’s Bluetooth set up function to search for this Bluetooth keyboard. Step3:Select SETTINGS > WIRELESS & NETWORKS > BLUETOOTH >ON Step4: Press the Fn and Pair button on your keyboard. A blue LED light will flash until your device and the keyboard are paired. Step5: Your device should find the “HP Bluetooth Keyboard T1000” and then list it as an available device. If it doesn’t, simply touch Search for devices and it will scan again. Step6: When the “HP Bluetooth Keyboard T1000” shows in your list of available devices, touch it to complete pairing. Charge The LED keep flashing in your working, the keyboard is short of power. It is time to charge the keyboard. Step1: Use the USB charging cable plug into outlet, put one end of the plug into keyboard USB charging cable. Step2: A Blue light will illuminate to indicate the keyboard is charging. Wait until this light turns off, indicating a full charge. It usually takes 2-4 hours to completely charge your keyboard. LED Indicator: Definition Indicator Description Charge with USB cable Blue No LED solid on When full charged, LED off Turn on power (no USB cable attached) Blue LED on after 3 seconds LED off Bluetooth pairing Blue LED blinking (1 time/per sec for 2 mins) Low power(=3.4v) Blue No When key in, LED blink When no action, LED off No power No LED off By accident protect for Keyboard No When the key press and hold after 15sec, the keyboard will stop send scan code. Keyboard specification and hotkey function: Keyboard Specification Hot Keys Function ( * compound key, Press with Fn key) *Back/ESC Keyboard ESCAPE *Search Search *Brightness Keyboard F2 Decrement Key Layout 82 Keys Hot Keys 12 Hot keys Key switch type scissor-structure type Press Keys travel 2.25 ± 0.30 mm (Max) Key force *Brightness Keyboard F3 Increment operating Hardware Bluetooth IC 62 ± 20 g Broadcom 20730 *System Setting Keyboard F4 PCB Material FR4 *Lock screen System Sleep for Android 4.0 or above LED indicator 1 (Paring / Battery low) Charger type Micro USB cable *Mute Turns off the tablet sound Battery type Li-Polymer 300 mAh with NTC/PTC Battery Life 120 hrs (operation) Keystroke life 10 Millions Power DC 3.7V +/-5%, Operation : 3mA (Max.) *Volume Decrease Decrement volume. the *Volume Increase Increment volume. the tablet tablet sound sound *Scan Next Switch to the next track Track consumption *Play/Pause Switch between Play and Pause *Scan Previous Track Switches to the previous track Home Home Left GUI Keyboard Left GUI Bluetoot Bluetooth pairing System Requirement Hardware Support OS Interface Android Tablet PC Android 4.2 or later Bluetooth 3.0 Operating Operating Humidity Operating Temperature 10%~90% -20℃~55℃ Standby : 0.8 mA (Max.) Sleep : 400uA (Max.) Recharge current 300 mA (Max.) Recharging time less than 4 hours Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Now, enjoy and have fun! Trouble Shooting Guide If your device does not respond to your keyboard there may be a simple explanation such as a dead battery or an unsuccessful pairing. Please use the following to help troubleshoot your situation. • Make sure the Power Switch at the top of the keyboard is set to ON. • Restart your device and re-pair your keyboard • Turn your Universal off and back on. You should see the LED status lights illuminate briefly, if not, charge your keyboard. • Forget and re-pair your Universal. If your device gives you an error message during pairing, repeat the pairing process.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : tiffany Create Date : 2015:06:16 15:40:32+08:00 Modify Date : 2015:07:07 14:26:34+08:00 Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : tiffany Title : USB 2 Creator Tool : Microsoft® Word 2010 Metadata Date : 2015:07:07 14:26:34+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:a322278f-977e-4575-b997-3e9c9a47d515 Instance ID : uuid:24020587-1a96-439b-871a-d0d74d098fc7 Page Count : 5EXIF Metadata provided by EXIF.tools