Acrox Technologies KB25 Wireless Keyboard User Manual NS PNC7011 16 0720 QSG V1 EN ai

Acrox Technologies Co., Ltd. Wireless Keyboard NS PNC7011 16 0720 QSG V1 EN ai

Manual

MOUSE FEATURESINSTALLING THE MOUSE BATTERIES AND REMOVING THE NANO RECEIVER1 Take the battery cover o.2 Remove the nano receiver. 3 Insert the included AA battery into the battery compartment. Make sure that the + and - signs match the symbols in the compartment.4 Replace the battery cover.Tip: Store the nano receiver in the mouse when it is not in use.KEYBOARD FEATURESPACKAGE CONTENTS• Wireless keyboard• Wireless mouse• Nano receiverSYSTEM REQUIREMENTS• Windows® 10, Windows® 8.1, Windows® 8, Windows® 7, or Mac OS 10.X or higher• One available USB portBefore using your new product, please read these instructions to prevent any damage.• AA battery (1)• AAA batteries (2)• Quick Setup GuideQUICK SETUP GUIDE Wireless Keyboard and Mouse Combo NS-PNC7011# ICON ITEM1 Play/Pause2 Stop3 Previous4 Next5 Volume down6 Volume up7 Mute8 Calculator9 LED indicator10 Connect button11 Battery coverDESCRIPTIONPress to play or pause media.Press to stop playing media.Press to select the previous media track.Press to select the next media track.Press to decrease the computer’s volume.Press to increase the computer’s volume.Press to turn o the computer’s sound.Press to launch the Microsoft calculator.Cap lock , Num lock, Low battery warning and pairing.Press to initiate pairing with your computer.Remove to install or replace the batteries.Red LED Right buttonLeft buttonScrolling wheel OFF/ON switchConnect buttonBattery coverUSB transceiverAA batteryPull Final flat size: 419.1 × 148.08 mm Final fold size: 104.775 × 148.08 mmNS-PNC7011_16-0720_QSG_V1_EN.ai 1 10/12/2016 12:37:37 PMNS-PNC7011_16-0720_QSG_V1_EN.ai 1 10/12/2016 12:37:37 PMV1FINALFOR PRINT
INSTALLING THE KEYBOARD BATTERIES1 Take the battery cover o.2 Insert two AAA batteries (included) into the battery compartment. Make sure that the + and - signs match the symbols in the compartment.3 Replace the cover.CONNECTING YOUR MOUSE AND KEYBOARD TO YOUR COMPUTER1 Plug the nano receiver into the USB port on your computer.2 Slide the ON/OFF switch on your mouse to ON. The computer automatically detects the mouse and keyboard and you can immediately begin using them.If the mouse or keyboard does not work:• Re-plug the nano receiver into the USB port on your computer, then press the connect button on the mouse and keyboard. The LED indicators on the mouse and keyboard ash steadily while in pairing mode (10 seconds). After pairing successfully, the LED turns o.• Check the batteries in your mouse or keyboard. The LED indicators blink for 10 seconds when the batteries are low.SPECIFICATIONSKeyboard:• Dimension (H×W×D): 5.6 × .8 × 17.1 in. (14.3 × 2.06 × 43.4 cm)• Weight: 16.9 oz. (.5 kg)• Rating: 3V C.C. - 4mA• Radio frequency: 2.4Ghz• Operating distance: 33 feet (10 meters)• Key number: 104 keys (US)• Battery: 2 AAA alkaline batteries• Battery life: 6 months (based on average usage)Mouse:• Dimensions (H×W×D): 1.43 × 2.57 × 3.85 in. (3.64 × 6.53 × 9.78 cm)• Weight: 1.86 oz. (.05 kg)• Battery: 1 AA alkaline battery• Battery life: 6 months (based on average usage)• Radio frequency: 2.4Ghz• Operating distance: 33 feet (10 meters)• Rating: 1.5V C.C. - 10mANano receiver:• Dimension (H×W×D): .6 × .2 × .7 in. (1.4 × .6 × 1.8 cm)• Weight: .04 oz. (.001 kg)• Interface: USB 1.1, 2.0 , 3.0TROUBLESHOOTINGMy mouse or keyboard is not working.• Make sure that your mouse and keyboard are turned on. • Move your keyboard and mouse closer to your computer.• Make sure that your computer meets the system requirements.• Only use the mouse on a clean, at, non-slippery surface to ensure smooth and accurate cursor action.• Avoid using your mouse on reective, transparent, or metallic surfaces.• Make sure that your mouse or keyboard and nano receiver are paired by pressing the connect button on the mouse or keyboard.• Replace the mouse or keyboard batteries.• Try connecting your nano reciver into a dierent USB port on your computer.• Try removing or moving other wireless devices near the computer to prevent interference.If your mouse pointer is too sensitive, or not sensitive enough, or your scrolling wheel needs adjustment, do the following:• Go to Control Panel > Hardware and Sound > Mouse (Windows 7), PC Settings > PC and Devices (Windows 8) or System Preferences > Mouse (Mac) and adjusting the cursor or scrolling wheel settings.LEGAL NOTICESFCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.RSS-Gen and RSS-210 statementThis device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.RSS-102 statementThis equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.ONE-YEAR LIMITED WARRANTYFor complete warranty, visit www.insigniaproducts.com.CONTACT INSIGNIA1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)www.insigniaproducts.comINSIGNIA is a trademark of Best Buy and its aliated companiesDistributed by Best Buy Purchasing, LLC7601 Penn Ave South, Richeld, MN 55423 U.S.A.©2016 Best Buy. All rights reserved.Made in ChinaLED INDICATORSCLEANING YOUR MOUSE AND KEYBOARD• Wipe the mouse and keyboard with a damp, lint-free cloth.LED indicatorLEDindicator2 AAA batteriesV1 ENGLISH 16-0720FUNCTIONPower ONLow battery warningPairing Pairing failedPaired successfullyDESCRIPTIONRed LED is on for 10 seconds, then turns o.Red LED blinks for 10 seconds.Red LED blinks for 10 seconds after pressing the Connect button.After pressing the Connect button, the LED blinks, then lights solid for 10 seconds.After pressing the Connect button, the LED blinks for 10 seconds, then turns o. NS-PNC7011_16-0720_QSG_V1_EN.ai 2 10/12/2016 12:37:46 PMNS-PNC7011_16-0720_QSG_V1_EN.ai 2 10/12/2016 12:37:46 PM

Navigation menu