Acrox Technologies MU02 Bluetooth Optical Mouse User Manual

Acrox Technologies Co., Ltd. Bluetooth Optical Mouse

user manual

Bluetooth Optical Mouse OWNER'S GUIDE Ver.1.0
1Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
2Functional Introduction Mouse Wheel & Pairing LED Battery Cover Connect Button ON / OFF SwitchLED Blinking Paired Link LED OFF Connected OK
3Battery and Power Management: Installing the batteries Step 1: Pull the battery cover backward. Step 2: Insert the batteries as shown inside the battery compartment. Step 3: Replace the cover. Power saving features: To conserve the battery power, the mouse offers power management functions as below: 1. The mouse goes into “Saving Mode” after 30 seconds of inactivity. 2. The mouse powers down to “Sleep Mode” after 10 minutes of Inactivity. Press one of the mouse buttons to wake it up while in Sleep Mode. There may be a slight delay while the mouse re-establishes Bluetooth connection from power saving or sleep mode. Push
4Establishing a Bluetooth Connection The Bluetooth mouse can work in any Bluetooth working environment. Before connecting your Bluetooth mouse with your computer, make sure your computer has a working Bluetooth configuration that meets Bluetooth Specification v1.1 or higher with Human Interface Device (HID) profile. If your computer does not support Bluetooth, you need to obtain and install a commercially available Bluetooth adapter which converts your computer to a Bluetooth environment. Paring your Bluetooth mouse with your computer Before paring your Bluetooth mouse with your computer, you should read through the instructions that came with your Bluetooth hardware and software for detail how to pair a device to your specific Bluetooth configuration. Follow below steps to pair your Bluetooth mouse under Windows XP/SP2 system. 1. Attach or turn on the Bluetooth radio adaptor for your Windows XP computer. 2. Switch on the mouse. 3. Click Start menu, click Control Panel and double click “Bluetooth Devices”. 4. On the “Devices” tab, click “Add”.
55. Select the “My device is set up and ready to be found” check box, and then click “Next”. 6. Press the connection button of the mouse and it starts paring with your PC/notebook. The Green LED light will blink when connecting. Click the icon that represents the Bluetooth mouse, and then click “Next”.
67. Click “Don’t use a passkey”, and then click “Next”. Check the documentation for the mouse for any passkey instructions. 8. You can find the Bluetooth mouse in the “Devices” tab when it connected. The Green LED will turn off automatically when the paring is successfully done. Note : Once the Bluetooth mouse is installed, you can either disconnect the wired mouse or leave it connected. (If you leave both mice connected, they will both work.)
7Disconnecting Bluetooth mouse from your computer If you would like to disconnect your Bluetooth mouse, just open the Bluetooth devices control panel and delete the pairing for the mouse.
8Troubleshooting A. Mouse does not work upon installation or is not detected Try one or more of the following:  Make sure you have installed the batteries correctly and turn the switch on. Replace a fresh set of batteries if it still doesn’t work.  Make sure that computer’s Bluetooth is enabled.  Press the connection button to reset the Bluetooth connection between your mouse and computer. Make sure it had been detected by the Operating Systems properly. B. The screen cursor does not move properly If your screen cursor lags behind the movement, then your Bluetooth connection may not be able to transmit all of the data from the mouse with the necessary speed. This may be caused by interference from other radio sources, obstructions in the radio wave path, excessive distance from the computer, or a combination of the above. ※Try the following actions to improve your Bluetooth connection and optimize your mouse performance:  Remove any metallic objects from the line of sight between your computer and Bluetooth mouse.  If you are using a computer with a built-in Bluetooth antenna, try reorienting the computer until you get a better data rate.  If you are using a Bluetooth device, use a USB extension cable and place the Bluetooth adapter onto your desktop or somewhere in sight of your Bluetooth mouse.  Move the mouse closer to your Bluetooth device.  Power off the mouse and turn it on again for better connection.  Disconnect any Bluetooth audio devices, such as headsets, that may be connected to your computer.  Switch off any other devices operating in the 2.4 GHz radio spectrum, such as Wi-Fi network, mobile telephones, etc., or move their antennas further away from your computer.

Navigation menu