Acrox Technologies MU32 Wireless Bluetrace Mouse User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2503397
Application ID	EF05cSjeua0uCHjAdK9T3w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.29kB (103597 bits)
Date Submitted	2015-01-16 00:00:00
Date Available	2015-01-16 00:00:00
Creation Date	2015-01-16 15:12:00
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-01-16 15:12:00
Document Title	Microsoft Word - GOD-Hyper scorlling說明書
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

2.4GHz Wireless
Smart Hyper scrolling BlueTrace Mouse
w/Nano Receiver
USER'S GUIDE
Ver.:1.00
CAUTION: To use this product properly, please read the user's guide before installing.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the
product can be kept as far as possible from the user body or set the device to
lower output power if such function is available.
Functional Introduction
1. Left button
2. Right button
3. Scrolling Wheel
4. Forward
5. Backward
6. Hyper Scrolling Switch Key(LED Indicator)
7. Nano Receiver
8. Battery Cover
9. Connect Button
10. ON/OFF Switch
Forward
Press this button to view the next page in your Internet browser.
Backward
Press this button to view the previous page in your Internet browser.
Hyper Scrolling Key (Two scrolling speeds )
a)
b)
Normal Scroll –LED Off
Hyper Scrolling –LED on and off after 10 secs
*Default is Normal Scroll *
Installing the batteries
Step 1: Take the battery cover off.
Step 2: Insert the batteries as shown inside the battery compartment.
1st
2nd
Pull
AAA Battery
Step 3: Replace the cover.
Step 4: Turn on power switch
**Warning:
*Please insert the batteries with the correct position according to the instruction
labeled on the mouse.
Setup the Connection between the Receiver and
the Mouse
1. Insert the batteries into the mouse, then follow the steps below.
2. In the meantime, to open the mouse under the cover, take the nano
receiver out.
3. Plug the Nano receiver into the USB port on your computer.
4. If the mouse does not work, please put it into pairing mode.
5. Pairing: Re-plug the receiver into the USB port on your computer, then
press the connect button on the mouse. If the mouse does not work
after 10 seconds, pair them again. (The receiver has auto pairing
function).
6. The LED indicator on mouse flashes steadily when it is in pairing
mode and stops blinking when it is successfully paired with the
receiver.
7. When low battery, the battery indicator on the mouse will start to blink.
LED Indicator
*Mouse Indicator
LED Blinking
During Pairing (LED OFF when
paired or failed after 10 sec.)
LED Blinks for 10 sec.
Low Battery Warning

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:01:16 15:12+08:00
Create Date                     : 2015:01:16 15:12+08:00
Format                          : application/pdf
Title                           : Microsoft Word - GOD-Hyper scorlling說明書
Creator                         : Administrator
Document ID                     : uuid:b78a97ad-276e-4017-8da6-71e2d7dc38a4
Instance ID                     : uuid:e60295bd-8b8d-4fd4-b3a6-4ee99da28abb
Page Count                      : 6
Author                          : Administrator

EXIF Metadata provided by EXIF.tools