Acrox Technologies PR01 2.4G Wireless Presenter User Manual PRB PRC MRL Users Guide 2012 rev 1126

Acrox Technologies Co., Ltd. 2.4G Wireless Presenter PRB PRC MRL Users Guide 2012 rev 1126

User Manual

Model No: PRB / PRC 2.4G Hall Presenter USER'S GUIDE Ver.:1.00 CAUTION: To use this product properly, please read the user’s manual before installation Please DO NOT direct the laser beam at anyone’s eye.
1Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits.
2 Installing the Batteries (Supplied) ˙Open the battery compartment by pressing down the cover latch and sliding the door off the presenter. ˙Insert the two supplied AAA batteries (included in the package) to the battery slots. Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment. ˙Close the battery cover back into position. Connecting the Presenter to the Computer ˙Retrieve the USB receiver dongle from the built-in storage located. *Sliding the battery cover off *Insert batteries to the correct polarities USB Receiver
3 ˙Connect the USB receiver dongle to an available USB port on your computer. Wait for the computer to go through its default process of recognizing the new hardware and installing the built-in native driver. You don’t need to do anything while your computer is going through the installation of a new device. ˙Power on the presenter by sliding the on/off switch to ON position ˙The radio frequency (RF) codes are factory preset for your convenience; the presenter should be functional at this point. ˙Pairing: Re-plug the receiver into the USB port of your computer, then press the connect button on the Presenter. If the Presenter does not work after 10 seconds, pair them again. (The receiver has auto pairing function). On/off Switch *Power switch on the presenter
4 Using the Presenter * For pairing, please press Mouse Left & Mouse Right button for 4 seconds. Laser Beam Mouse Left Key Mouse Right Key ON/OFF Switch Cursor Backward Forward Hall Point Esc/F5 Dark Screen Laser Beam Switch 1. Pairing LED Indicator 2. Low Batter Indicator 3. Laser Beam Indicator Mouse Left Key Mouse Right Key
5 Function keys Description No. Items Description 1 Power On/OFF Main power switch 2 Scroll up/down Scroll up/down/Middle 3 Mouse Left key Mouse Left key 4 Mouse right key Mouse right key 5 Hall Point Mouse cursor control 6 Pre. Page Backward 7 Next Page Forward 8 ESC/F5 ESC/F5 9 Dark Screen Dark screen/ "B" 10 Laser pointer Laser pointer ON/OFF switch (LED inside) Presenter Indicator Power ON: LED IS ON FOR 3 sec Pairing: LED IS ON FOR 10Sec Low Battery Alarm The LED light flashing in red indicates battery power is low please change the batteries as soon as possible.
6Low Battery : LED will Blink once per second.

Navigation menu