Acrox Technologies PR02 Wireless Presenter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3236921
Application ID	pt4HGDwHVtch2+ZYbcIw8A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	66.35kB (829375 bits)
Date Submitted	2016-12-22 00:00:00
Date Available	2017-06-20 00:00:00
Creation Date	2016-12-08 16:33:39
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-12-08 16:33:47
Document Title	User Manual
Document Creator	Adobe InDesign CC 2015 (Windows)

2604623
User’s Guide
Package Contents
•• Wireless Presenter
• Receiver
•• Carrying Pouch
• User’s Guide
System Compatibility
•• Windows® 10, Windows 8, Windows 7
•• Mac OS® 9 or above
Note: Not all functions will work with all Mac operating systems.
Install Batteries
Slide open the battery cover, and insert
two AAA batteries (not included) in the
battery compartment matching the
polarity symbols (+ and –) marked inside.
Wireless Presenter
Battery Notes:
•• Make sure the ON/OFF switch is at the OFF position before
installing or replacing batteries.
•• If the battery / laser indicator flashes during operation,
replace the batteries.
•• Dispose of batteries promptly and properly. Do not burn or
bury them.
•• Use only fresh batteries of the required size and type.
•• Do not mix old and new batteries, different types of
batteries (alkaline or rechargeable), or rechargeable
batteries of different capacities.
•• If you do not plan to use the presenter for a long time,
remove the batteries. Batteries can leak chemicals that can
damage electronic parts.
2604623_UG_EN.120816.indd All Pages
Plug in the Receiver
Point laser aperture at target
We hope you enjoy your Wireless Presenter from RadioShack.
Please read this user's guide before using your wireless
presenter.
Receiver
Plug into your computer's USB port
Battery / Laser
Indicator
Flashes - low
battery
Lights - laser
beam is on
Press to turn on
the laser beam.
Release to turn off.
ON/OFF
Displays opened
application icons
Press repeatedly
to select desired
application icon
Pause on the icon
for 3 seconds to
open
Stopwatch
0 :0 0
Turns stopwatch
function on/off
Start, pause
and resume
stopwatch
F5 / ESC
Displays a black
screen during a
slideshow. Press
again to resume
slideshow
Starts / exits
slideshow
Lights constantly - stopwatch is on/paused
Flashing - stopwatch is activated and counting
Hour Minutes Elapsed time advances at 1 minute increments
Next Page
Black Screen
Press to turn on
Connect
Button
Important Safety Precautions
•• Warning! Never look directly into the laser beam.
•• Warning! Keep away from children.
•• Warning! Never point the device towards anyone’s eyes.
•• Warning! Laser light can also be dangerous when reflected
on a mirror-like surface.
•• Warning! Use of controls or adjustments, or the
performance of procedures other than specified herein,
can result in hazardous radiation exposure.
Troubleshooting
If you have difficulty pairing your presenter with your computer:
Stopwatch automatically turns on in standby mode when
presenter is turned on. If stopwatch is not activated within 1
minute, it turns off.
Stopwatch
Previous Page
Slide the ON/OFF switch to ON.
Your presenter and receiver is automatically
paired.
•• If you do not plan to use your presenter for several
minutes, slide ON/OFF to OFF to save battery power.
Scrolls up/down
page
Press to turn on
LCD backlight.
Release to turn off.
Application
2.
•• Insert the receiver back into the presenter’s receiver slot
when not in use.
Scroller / LCD
Display Backlight
Shows elapsed
time
Turn on your computer and plug the receiver
into a USB port.
Note:
Laser Button
LCD Display
1.
Press repeatedly to start, pause, and resume
counting.
Press and hold to turn off.
To reset the stopwatch, turn it off and on again.
•• Make sure you have properly installed fresh batteries.
•• Pair the presenter and receiver again:
1.
Place the presenter within 12 inches (30.5cm) of the
receiver.
2.
Slide the ON/OFF switch to ON.
4.
If pairing fails, switch the ON/OFF switch to OFF, then
repeat pairing steps.
3.
Press the connect button on the receiver, then press
the connect button on the presenter.
Care and Maintenance
•• Use and store the presenter only in room temperature
environments.
•• Keep the presenter dry; if it gets wet, wipe it dry immediately.
•• Keep the presenter away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it looking new.
•• Handle the presenter carefully; do not disassemble or
drop it.
Specifications
RF Frequency............................................................................... 2.4 GHz
RF Distance........................................................................... 85 ft. (25 m)
Wavelength................... 650nm ± 10nm (Class IIIa Laser Product)
Power Output................................................................................ < 5mW
Specifications are subject to change and improvement without notice. Actual product may vary from the images found in
this document.
FCC Information
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
•• Reorient or relocate the receiving antenna.
•• Increase the separation between the equipment and
receiver.
•• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•• Consult the dealer or an experienced radio/TV technician
for help.
If you cannot eliminate the interference, the FCC requires
that you stop using your product. Changes or modifications
not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Product
Wireless Presenter
Model
2604623
Responsible
Party
General Wireless Operations Inc.
dba RadioShack
300 RadioShack Circle
Fort Worth, TX 76102
817-415-3200
Limited Warranty
Go to www.radioshack.com/help for details.
RadioShack Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102
Windows is a registered trademark of Microsoft Corporation in the
United States and/or other countries.
Mac OS is a registered trademark of Apple Inc., registered in the
U.S. and other countries.
Complies with the European Union’s
“Restriction of Hazardous Substances
Directive,” which protects the
environment by restricting specific
hazardous materials and products.
© 2016 General Wireless Operations Inc.
All rights reserved. RadioShack is a registered
trademark used by General Wireless
Operations Inc. dba RadioShack.
radioshack.com
12A16
2604623
Printed
in China
12/8/2016 4:33:47 PM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c123 79.158978, 2016/02/13-01:11:19
Create Date                     : 2016:12:08 16:33:39+08:00
Metadata Date                   : 2016:12:08 16:33:47+08:00
Modify Date                     : 2016:12:08 16:33:47+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Instance ID                     : uuid:a2a798da-f730-4e07-827e-0c8fd62156da
Original Document ID            : xmp.did:35B5A70CCAF1E311899DB9C010E8E535
Document ID                     : xmp.id:6bc4efc6-9639-0046-9d86-33a66725a4df
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:daa5ee90-2dc0-e042-8a73-7ad53726b33c
Derived From Document ID        : xmp.did:78e4cf13-e9f2-0049-aba0-8da51695d9ae
Derived From Original Document ID: xmp.did:35B5A70CCAF1E311899DB9C010E8E535
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2016:12:08 16:33:39+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 1
Creator                         : Adobe InDesign CC 2015 (Windows)

EXIF Metadata provided by EXIF.tools