Action Electronics 9R3LCD648 User Manual 40022

Download:
Mirror Download [FCC.gov]
Document ID	40022
Application ID	VpBTW2EcLOxiQ/95jU1ARA==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.49kB (193593 bits)
Date Submitted	1999-06-03 00:00:00
Date Available	1999-04-20 00:00:00
Creation Date	2001-06-19 11:49:19
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-06-19 11:49:26
Document Title	40022.pdf
Document Author:	VicodinES /CB /TNN

fiéXVfifflk
Pr oucd sbyAuiovd
6.4“ Flipdown LCD ‘
ln-Vehiqle
Entertainment System
Owner's Manual
, and
Installation Guide
Features:
1.6.4" TFT Active Matrix Color LCD.
2. 3 Channel AN Switching Builtvln.
3. Audio Amplifier, Volume Control , Channel Control and Headphone Jacks BuiltAIn.
4. Built-In Dome Lights.
5. Game/CamcorderAN Input Jacks.
5. Backlit Controls for Easy Night Time Operation.
7. "Hide-Away" Screen When Not in Use.
8. TVTuner Built-in.
9. Infra Red Remote Control Repeaer Circuit ( for wireless Video Cassette Player and
DVD Player Functions).
10, FM Transmitter Function (Two Bands: 88.7MH1 and 89.1MHz).
11. Infra Red Transmitter Function.
POWER REQUIREMENTS:
Power Supply: The VOH-642 (LCD-64a) Is Designed For DC 12 Volts Operation.
Front Panel Features:
_~_\..._L_L_.
QSJ‘PPNT‘
_L
QSQSDflP’anrhSPNT‘
BAND SELECT BUTTON
AUTO PROGRAM BUTTON '
VOLUME UP BUTTON ‘
VOLUME DOWN BUTTON
SENSOR RECEIVER
CHANNEL UP BUTTON
CHANNEL DOWN BUTTON
POWER BUTTON
CAR LAMP SWITCH
IR TRANSMITTER SWITCH
FM TRANSMITTER BAND SWITCH
AUX AUDIO LEFT INPUT
AUX AUDIO RIGHT INPUT
AUX VIDEO INPUT
HEADPHONE OUTPUT
HEADPHONE OUTPUT
r’ fig Ulcgmm.
j’
, \
MinifDin Connectors
TV cnlermu
powe' and Speaker
and Line Out Connector
Source ‘
Component—fl
Harness
RCA (video)
Wnike RCA(Audic Left)
‘v‘ Adapter
for use mm
Nan—Stereo
. Insmnuflons
Ram; 31:
Power Connecmr
JR LED.
C‘eon the R Recew’ver Window on the front of the VCP.
REMOVE Adhesive Bucking and Apply IR LED to H?
Wmdow on the Face of the VCP,
EDMUND
BUUDDDUD
Rec: u2v DC Power Harness
LN
Bockzcrouhd
Yeitow: Line out (Video)_i ii
Qed: Lihe out (Audio Right)‘
White: Line out (Audio Left) it
i Power and Specke'
Greeh: Speckef output (Right) H “d“"e‘i‘lcwmm
L uz
Grcy: Speaker output (Left) ‘ *
Biock: Speaker output (Grouhd) D
Red: Car Light (ON Mode):i:i:
White: Cor Light (Auto Moddm
Biock: Cor Light (Common Ground)m
Before attempting to operate your Remote Control, install batteries as described below.
1, Turn the Remote Control face down. Press clown on the ridged area ofthe battery cover and
slide it off.
2. Install two ”AAA" batteries as shown. Make sure that proper polarity ( +or— ) is observed.
-3. Slide the cover back until it clicks.
1.TV PARTS:
1. TV POWER
Press this button to tum on the set.
The channel number will be displayed on
screen, and the picture will appear in a few
seconds.
Press the button again to turn the set off,
2. DIRECT ACCESS (0-9, 1—) BUTTONS
Use these buttons to make a direct channel
selection.
The channel number chosen will be displayed
on the screen for about four seconds.
The direct access is carried out with 0-9 keys
(O-Qsch) and "1—-" key (1 UO-125ch),
3. CHANNEL UP/DOWN BUTTONS
Use these buttons to advance to the next
higher (A)or lower (V)channel.
4. VOLUME/PICTURE SELECTOR UPIDOWN
BUTTONS
Use these buttons to raise (A) or lower (7)
the sound. level also used to make picture
adjustments in picture selector mode.
a. r’lutun: oszh run but rum
Each time this button is pressed, the on screen picture adjustment display cycles through
“adjustment bars" for CONTRAST, BRlGHTNESS, COLOR and TINT. Then use VOLUME
UP/DOWN buttons to raise (A) or lower (V) the level. The display will automatically turn off if
no adjustments are made within about 6 seconds, or if any other button is depressed,
6. MUTE BUTTON
Press this button to cutoff all sound. Pressing the button again restores sound to the previously
‘set level. MUTE may also be released by pressing the VOLUME UF/DOWN BUTTONS.
VOLUME
Houuuuuuuuouu
7. TVNIDEO BUTTON
Any video equipment connected to the AUDlONlDEO input jacks can be used with the TV by pressing
this button.
Gt AUTO PROGRAM BUTTON
When AUTO PROGRAM button is depressed, all channels in TV or CATV mode are searched and
tuned. and the channels with signals detected are automatically stored.
9. SKIP/SEARCH BUTTON
This button selects between SKIP and SEARCH mode. In ”SKIP mode" the TV only stops on
channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used.
When SKIP mode is off the TV will stop on all active channels,
10. ERASE/WRITE BUTTON
This button is used to manually add or erase any channel that is stored in the CHANNEL UP/DOWN
memory. The stored channel numbers are displayed in "GREEN“ on the screen. and the non-stored
channel numbers are in "RED".
2.VCP PARTS:
12. POWER BUTTON
This button is used to turn the unit on and off.
13. "REW" REWIND Button
if this button is pushed while the tape is stopped, the tape will rewind, If this button is pushed
while the tape is playing, the VCP will go into rewind Search mode. For more information on
search feature of the VCP, consult VCP owners manual.
14. PLAY Button
Press this button to activate play mode while a tape is loaded into the VCP. This button may
also be used to disengage search and pause modes. For more information. consult the VCP
owners manual.
15. "F. FWD." FAST FORWARD Button
If this button is pushed while the tape is stopped, tape will fast forward. If this button is pushed
while the tape is playing. the VCP will go into fast forward search mode. For more information
on search feature of the VCP. consult the VCP owner‘s manual.
16. PAUSE Button
During playback, press this button to temporarily stop the tape. A pause picture is produced.
To continue normal
17. STOP Button
Press this button to stop the tape.
Follow this simple procedure to make channel tuning more convenient:
1, Press the AUTO PROGRAM button on the Remote Control Unit. you will see the TV cycle through all
channels. The built-in Microprocessor will automatically note each channel that is actively broadcasting
in your area.
2. (1)Press the SKIP/SEARCH button on the Remote Control Unit until "SKIP MODE ON" is displayed on
the button of the screen. That's all there is to it, From now on, whenever you use the CHANNEL UPI
DOWN buttons on the front panel or the Remote Control, the TV will stop only on active channels.
SKIP MODE SKIP MODE
ON OFF
(2)Press the SKIP/SEARCH button on the Remote Control Unit until “SKIP MODE OFF” is displayed on
the button of the screen. Tune to the desired channel using the CHANNEL UP/DOWN button or go
directly to the channel by direct access using the 0-9 buttons on the Remote Control,
3. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit the MANUAL
MEMORY has erase displayed on screen. To STORE a channel, press the button unit the MANUAL
MEMORY has add displayed on screen.
NoticezThe changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the epuipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, OPERATIONS IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED.
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESRIED
OPERATION.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:06:19 11:49:19
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : VicodinES /CB /TNN
Title                           : 40022.pdf
Modify Date                     : 2001:06:19 11:49:26-04:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools