Actiontec Electronics C2000A Wireless 11n VDSL2 Modem Gateway User Manual C2000A QSG 082212

Download:
Mirror Download [FCC.gov]
Document ID	1778089
Application ID	PNUiAwc2OBvhgbk6e/QeOg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.81kB (210140 bits)
Date Submitted	2012-08-29 00:00:00
Date Available	2012-08-29 00:00:00
Creation Date	2012-08-27 10:14:10
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2012-08-29 13:35:25
Document Title	Microsoft Word - C2000A_QSG_082212
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Angelay

Actiontec Electronics, Inc.
760 North Mary Ave., Sunnyvale, CA 94085 USA
Wireless 11n VDSL2 Modem Gateway
Model #: C2000A 802.11n Router, FV2200
Quick Start Guide
Version: 2.0 (Draft to be review)
Connect the Gateway to a Computer
1. Get C2000A 802.11n Router or FV2200 from the Quick Start Kit and take it out of the bag.
2. Get the Power Cord from your DSL Quick Start Kit.
(Power: External, 12V DC, 1.8A; Model: STD‐12018U1)
3. Plug the smaller end of the Power Cord into the Black Port on the back of the Gateway.
4. Plug the larger end of the Power Cord into a Power Outlet.
5. Make sure the Power Switch is On.
6. Make sure the Power Light on the Gateway is SOLID Green.
7. Get the Yellow Cable
8. Plug one end of the Yellow Cable into any of the Yellow Ports on the back of the Wireless DSL Gateway.
9. Make sure that your computer is turned on. Then, plug the other end of the Yellow Cable into the
Ethernet Port on the back of the computer. An Ethernet Port looks similar to a regular Phone Jack, but is
slightly larger.
10. Make sure that 1 of the 4 Ethernet lights on the Gateway is Green. This may take a few moments.
11. Get the Black or Green DSL Cable from your DSL Quick Start Kit.
12. Plug one end of the DSL Cable into the Green Port located on the back of the Gateway.
13. Plug the other end of the DSL Cable into the Phone Jack closest to your Computer.
14. Make sure All Devices with the same phone number as your DSL Line has Phone Filters. This includes
telephones, fax machines, caller ID boxes, satellite TV receivers, TiVo devices, and answering machines.
15. Make sure that that Power and DSL Lights are solid Green. This may take up to 30 seconds.
Note: If the DSL Light continues to blink, make sure you received notification from your DSL Internet Service
Provider that your DSL service has been activated.
Configure the Gateway
1. Open a Web Browser (FireFox or Internet Explorer, for example). In the address bar, enter
http://192.168.0.1 then press Enter on the keyboard.
Note: When you open your web browser you may get a page cannot be displayed error. This is normal and
will not effect the instructions in step 1.
2. The GUI login username and password values can be found on the bottom sticker.
3. The "Main Menu" screen appears. Select Quick Setup
Note: If this screen does not appear, make sure our Ethernet port is configured for Dynamic IP.
4. Select No Realm from the drop down menu then enter the PPP username and password.
Configure Wireless Connection and Security
1. Click on Wireless Setup
2. Select a name for your wireless network and enter it in the "Network Name" field. Then click Apply.
3. Click on Wireless Security from the left column menu.
4. Select the type of wireless security that you want to use Actiontec recommends using WPA&WPA2. The
following steps will show you how to enable WPA&WPA2 wireless security.
Note: All of your other wireless devices will need to support that same type of wireless security chosen in
order to connect to your wireless network.
5. Enter in a password or pre‐shared key. The key must be at least 8 characters long. Click Apply to
continue.
Congratulations you are now connected!
Specifications
1. Features
•
Supports Plug‐and‐Play installation.
•
Compliant with full‐rate ANSI T1.413 Issue 2 and ITU G.992.1 (G.dmt) standard.
•
ADSL2+ / VDSL2 Bonded / Single Line Compliant
•
DMT modulation and demodulation.
•
Supports RFC1483 (bridged Ethernet over ATM) for LAN mode.
•
Full‐rate adaptive modem: max. Downstream rate is 8 Mbps, max. upstream rate is 1 Mbps.
•
Compliant with IEEE 802.3 Ethernet standard.
•
Supports 10BaseT and 100BaseT and Gigabit.
•
2.4 GHz IEEE 802.11n
•
Supports 20 MHz channels with optional SGI
•
Full IEEE 802.11 b/g/n legacy compatibility with enhanced performance
Comprehensive wireless network security support that includes WPA, WPA2, and AES
encryption/decryption coupled with TKIP and IEEE 802.1X support
•
Support 802.11b and Draft STD 802.11g Modulation.
•
802.11b Data Rates: 11Mbit/s, 5.5Mbit/s, 2Mbit/s, 1Mbit/s
(And 22Mbit/s with PBCC);
•
802.11g Data Rates: 6Mbit/s, 9Mbit/s, 12Mbit/s, 18Mbit/s, 24Mbit/s, 36Mbit/s, 48Mbit/s, 54Mbit/s.
•
802.11g Data Rates: 65Mbit/s, 130Mbit/s
2. Power requirements
•
Operating voltage:
+12V +/‐ 5% @ 1.8A max
•
Power Dissipation Active:
12V DC @ xxx mA (typical)
3. Environmental Operating Range
•
Operating temperature:
0º C to 40º C (32º F to 104º F)
•
Humidity:
8‐95%, non‐condensing
4. Dimension and Weight
•
9.9” (L) x 5.7” (W) x 1.4” (H)
1.35 lb.
5. Certifications
•
FCC Part 15 Class B, Class C and Part 68; Safety UL/cUL
General Regulatory and Compliance Notices
Important Safety Instructions
If applicable, when using telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical
shock, and personal injury, including the following:
Do not use this product near water – for example, near a bathtub, kitchen sink, laundry tub, or swimming pool, or in a wet basement;
Avoid using a telephone (other than a cordless type) during an electrical storm, as there may be a remote risk of electrical shock
due to lightning;
Do not use the telephone to report a gas leak in the vicinity of the leak;
Use only the power cord and batteries indicated in this manual;
Do not dispose of batteries in fire, as they may explode – check with local codes for possible special disposal instructions.
•
•
•
•
•
Telephone Line Cord Caution
To reduce the risk of fire, use only No. 26 AWG or larger (e.g., 24 AWG) UL Listed or CSA Certified Telecommunication Line Cord.
Coaxial Cable
If applicable, the coaxial cable screen shield needs to be connected to the Earth at the building entrance per ANSI/NFPA 70, the National Electrical
Code (NEC), in particular Section 820.93,“Grounding of Outer Conductive Shield of a Coaxial Cable,” or in accordance with local regulation.
FCC Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try and correct the interference by implementing one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected;
Consult the dealer or an experience radio or television technician for help.
•
•
•
•
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by
Actiontec Electronics, Inc, may void the user’s authority to operate the equipment.
Declaration of conformity for products marked with the FCC logo – United States only.
This devices complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions:
1.This device may not cause harmful interference;
2.This device must accept any interference received, including interference that may cause undesired operation of the device.
Canadian Industry Regulations
This product meets the applicable Industry Canada technical specifications.
The Class [B] digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation.
Important Note
If applicable, this equipment complies with FCC/Industry Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
For questions regarding your product or the FCC/Industry Canada declaration, contact:
Actiontec Electronics, Inc
760 North Mary Avenue, Sunnyvale, CA 94086, United States
Tel: (408) 752-7700 Fax: (408) 541-9005
PN 0530-0601-102
PI1022/0210
Avis d’application de la réglementation et de conformité généraux
Consignes de sécurité importantes
Afin de réduire les risques d’incendie, de blessures corporelles ou d’électrocution, suivez toujours ces mesures préventives de base
lorsque vous utilisez votre téléphone.
N’utilisez pas ce produit près de l’eau, par exemple, à proximité d’une baignoire, d’un évier de cuisine, d’une cuve à lessive, d’une
piscine ou dans un sous-sol humide.
Évitez d’utiliser un téléphone (autre qu’un sans fil) pendant un orage électrique; les éclairs peuvent être à l’origine d’une électrocution.
N’utilisez pas le téléphone pour rapporter une fuite de gaz à proximité de celle-ci.
N’utilisez que le cordon d’alimentation et les piles indiqués dans ce guide.
Ne jetez pas les piles dans le feu, car elles peuvent exploser. Consultez les autorités locales afin de connaître les instructions de
recyclage des piles.
•
•
•
•
•
Mise en garde concernant le cordon téléphonique
Pour réduire les risques d’incendie, utilisez seulement un cordon téléphonique 26 AWG ou plus large (p. ex., 24 AWG) répertorié UL
ou certifié CSA.
Câble coaxial
S’il y a lieu, l’écran protecteur du câble coaxial doit être mis à terre à l’entrée du bâtiment, conformément au paragraphe 820.93 du Code national
de l’électricité, ANSI/NFPA 70,“mise à terre de l’écran conducteur externe d’un câble coaxial”,ou conformément à la réglementation locale.
Équipement de classe B
Ce matériel a été contrôlé et satisfait aux limites imposées pour les appareils numériques de classe B, conformément à l'alinéa 15 de la
réglementation FCC. Ces limites sont destinées à assurer une protection raisonnable contre les interférences dans un environnement
résidentiel. Cet appareil produit, utilise et peut émettre de l’énergie haute fréquence et, s’il n’est pas installé et utilisé conformément aux
instructions, il peut provoquer des interférences dans les communications radio. Cependant, les risques d'interférences ne peuvent pas
être totalement exclus. S'il constate des interférences lors de la réception d'émissions de radio ou de télévision (il suffit, pour le constater,
d'allumer et d'éteindre successivement l'appareil), l'utilisateur devra prendre les mesures nécessaires pour les éliminer.
Réorientez ou déplacez l’antenne réceptrice.
Éloignez l’équipement de l’appareil récepteur.
Branchez l’appareil sur une prise ou un circuit différent de celui de l’appareil récepteur.
Consultez le revendeur ou un technicien de radio ou de télévision expérimenté.
•
•
•
•
Modifications
Conformément à la réglementation FCC, tout changement ou modification non autorisé explicitement par Actiontec Electronics, Inc.
est de nature à priver l’utilisateur de l’usage de l’appareil.
Déclaration de conformité des produits munis du logo FCC, États-Unis uniquement.
Cet appareil est conforme à l’alinéa 15 de la réglementation FCC et avec Industrie Canada exempts de licence standard RSS. Son
fonctionnement est soumis à deux conditions:
1.il ne doit pas provoquer aucune interférence gênante;
2.doit pouvoir supporter toute interférence reçue, y compris celles susceptibles d’en affecter le fonctionnement.
Industrie Canada
Le présent matériel est conforme aux specifications techniques applicables d'Industrie Canada.
Cet appareil numerique de la class [B] repecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.
Remarque importante
Cet appareil respecte les limites d’exposition aux radiations de la FCC/Industrie Canada, définies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec une distance minimale de 20 centimètres entre le radiateur et votre corps.
Le transmetteur ne doit pas être situé ou fonctionner en conjonction avec une autre antenne ou un autre transmetteur.
Pour toute question concernant votre produit ou la déclaration de conformité des produits munis du logo FCC/Industrie Canada, veuillez
vous adresser au service suivant:
Actiontec Electronics, Inc
760 North Mary Avenue, Sunnyvale, CA 94086, United States
Téléphone: (408) 752-7700 Télécopieur: (408) 541-9005

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2012:08:27 10:14:10-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:08:29 13:35:25-07:00
Metadata Date                   : 2012:08:29 13:35:25-07:00
Format                          : application/pdf
Creator                         : Angelay
Title                           : Microsoft Word - C2000A_QSG_082212
Document ID                     : uuid:86ad7c27-b682-413a-b611-bd4c7bc25e77
Instance ID                     : uuid:dbf763e9-d3f0-43a6-b566-5263fa58027c
Has XFA                         : No
Page Count                      : 6
Author                          : Angelay

EXIF Metadata provided by EXIF.tools