Activision Publishing 83787790 Wii"TONY HAWK:RIDE" SKATEBOARD CONTROLLER User Manual TH Ride TRI Wii Front and Back ai

Activision Publishing, Inc. Wii"TONY HAWK:RIDE" SKATEBOARD CONTROLLER TH Ride TRI Wii Front and Back ai

Users Manual

TITLE: Tony Hawk Ride Quick Start Guide15-5/16” X 21-3/4” (15.3125” x 21.75”) DATE: 3/17/09 DIE NUMBER: GH_QuickStart_F18BackFront7-1/4”7.25”184.151mm7-1/4”7.25”184.151mm7-1/4”7.25”184.151mm5-1/8”5.125”130.176mm5-1/8”5.125”130.176mm5-1/16”5.0625”128.588mmFront ViewInside dotted lines are fold lines.Inside white spaces are safety areas.Outside solid lines are trim lines.Outside dotted lines are bleed lines.TITLE: Guitar Hero Quick Start Guide15-5/16” X 21-3/4” (15.3125” x 21.75”) DATE: 3/17/09 DIE NUMBER: GH_QuickStart_F18BackFront7-1/4”7.25”184.151mm7-1/4”7.25”184.151mm7-1/4”7.25”184.151mm5-1/8”5.125”130.176mm5-1/8”5.125”130.176mm5-1/16”5.0625”128.588mmBack ViewInstall the batteriesInstaller les pilesColoca las pilasNote: Opening the battery compartment requires one (1)Phillips head screwdriver1. LEDs2. - Button3. Power Button4. D Pad5. A Button6. B Button7. 1 Button8. 2 Button9. + ButtonWireless receiver10. Connect Button and receiver status light11. USB connectorPress Connect Button on the receiverFrenchSpanishTurn ON the Wii™ console. Before inserting the game disc, plug in the receiver to the USB port and make sure skateboard control-ler connects to the receiverFrenchSpanishPress the Power Button on the skateboard controllerFrenchSpanishThe Wii Remote™ canbe used for navigating menuscreens. The skateboard controller can be used to navigate the in-game Pause menu (see software manualfor details)FrenchSpanish For troubleshooting information, please refer to the manuals included with the product, or go to http://warranty.thride.comPour tout dépannage, consultez le manuel d’instructions ou visitez le site : http://warranty.thride.comPara obtener información sobre la resolución de problemas, consulta el manual de instrucciones o visita: http://warranty.thride.com© 2009 Activision Publishing, Inc. Activision is a registered trademark and RIDE is a trademark of Activision Publishing, Inc. All rights reserved. Tony Hawk is a registered trademark of Tony Hawk, Inc. All rights reserved.Hardware Manual • FRENCHSPANISHImportant! Before using the Wii™ console with this product, read the Wii™ console instruction manual for safety, health and other information regarding the use of the Wii™ console.Important! Before using the PLAYSTATION®3 system with this product, read the PLAYSTATION®3 system instruction manual for safety, health and other information regarding the use of the PLAYSTATION®3.Important! Before using the PLAYSTATION®3 system with this product, read the PLAYSTATION®3 system instruction manual for safety, health and other information regarding the use of the PLAYSTATION®3.Wireless Controller for Wii™Manette sans l pour Wii™Controlador inalámbrico para Wii™FPOWii™ SKATEBOARD CONTROLLER INSTRUCTIONS1. Install four new alkaline batteries into skateboardcontroller. Notice the four blue LEDs on the side of board will begin blinking. This indicates the skateboard controller is searching for a paired receiver dongle.2. Plug in the dongle into the USB port of the Wii™ console. Once it is recognized by the system, the red LEDon the dongle will start blinking. This indicates the dongleis searching for the paired skateboard controller.3. If the four LEDs on the skateboard turn o, press the Power Button once to turn on the skateboard controller. After the skateboard controller connects with the dongle, only one LED will stay lit. This LED indicates which skateboard controller port you are using (1–4).4. After booting up the game, you can use the Wii Remote™to navigate the main menus and select options.5. Once you start a game session, use the skateboardcontroller to play the game. You can also use the skateboard controller to navigate the in-game Pause menu.Auto Sleep Mode1. If the connection with the skateboard controller is lostfor more than 30 seconds, it will enter sleep mode. Pressthe Power Button on the side of board to turn the board back on.2. If no button is pressed or there is no movementof the board within 15 minutes, the skateboard controller will enter sleep mode. Press the Power Button to turn it back on.Re-Matching Dongle with Skateboard ControllerThe dongle included in this package is already pairedwith the skateboard controller. In the event you need to pair a new dongle to the skateboard controller, please follow these steps:1. Plug new dongle into system and make sure the LED onit is blinking.2. Press and HOLD the Power Button for more than 5seconds. The four LEDs will blink fast, indicating you arein pairing mode.3. Press the Connect Button on the dongle once. The LED on the dongle will blink fast to indicate that it is in pairing mode.4. After a few moments, the LEDs on both the dongleand skateboard controller will stop blinking and remainsteady, indicating that they have successfully been paired.Battery LowIf one of the LEDs on the skateboard controller beginsblinking while the skateboard controller is on and paired, this indicates that your batteries are getting low. Please replace the batteries in the skateboard controller as soon as possible.PLAYSTATION®3 systemUSE INSTRUCTIONSIMPORTANT! For proper use and to avoid injury, read and follow the important safety instructions in this hardware manual and the software manual.Maximum weight limit is 300 lbs. Use only while wearing comfortable, at, rubber soled shoes, such as sneakers. Do not wear shoes with heels, ip-ops or open toed shoes. Wear comfortable clothing while using the skateboard controller. Avoid clothing that limits your range of motion or overly baggy clothing that may get caught on the skateboard controller.IMPORTANT! Place the skateboard controller on a at, horizontal and stable surface for gameplay. For safety and to prevent marks on your oor, use indoors on a carpeted surface only. However, for households without carpet or if you are using the skateboard controller on a non-carpeted surface, attach the enclosed stickers to the skateboard controller in accordance with the instructions in this manual to reduce potential slippage and marks to your oor. If the skateboard controller leaves a mark on your oor, try wiping the mark with a wet sponge. If your stickers need to be replaced, try your local hardware store.Make sure to clear enough space around you before playing. Do not jump on, use excessive force on, or try to grab the skateboard controller during gameplay. Never try to push the buttons on the side of the skateboard controller with your hands while you are standing on it. Do not attempt to perform 360’s or other skateboard tricks on the skateboard controller. Players should not attempt to perform moves other than those depicted in the game.Watch your balance, and make sure the skateboard controller is lying at when you use it - do not stand the skateboard controller on its edge.After you are nished using the skateboard controller, put it away in a safe place so that people will not trip over it.Avoid excessive play. If your hands, wrists, arms, legs, feet or eyes become tired or sore while playing, stop and rest them for several hours before playing again. Take frequent breaks to avoid any discomfort or cramping in your hands, legs or feet. If you experience discomfort or cramping in your hands, legs or feet, try dierent play styles to nd the one most comfortable for you. WARNINGS CAUTION: This product requires physical movement, and the skateboard controller moves when used. You should not play if you have a medical condition that might impact your ability to use the skateboard controller (this may include heart, respiratory, or orthopedic conditions; high blood pressure; symptoms linked to epilepsy or seizures; or pregnancy). If you have any doubts, consult with a physician. The skateboard controller is not a skateboard. It is not intended for any use other than in connection with the Tony Hawk: RIDE software. Do not use the skateboard controller with any other software or game.Not for use for ages under 10. French SpanishFrenchSpanishFrench SpanishCUSTOMER SUPPORT | LIMITED HARDWARE WARRANTYThank you for purchasing the Tony Hawk: RIDE skateboard controller. For your personal safety and the safety of others, please carefully read this hardware manual before using the product.WIRELESS CONTROLLER INSTRUCTION MANUAL ENGLISHSKATEBOARD CONTROLLER CARE (1) Keep the skateboard controller dry and away from open ames or other heat sources. (2) Do not leave the skateboard controller in a dusty or humid place. (3) Do not modify or disassemble the skateboard controller under any circumstances. (4) Never jump on, use excessive force on, or try to grab the skateboard controller during gameplay. Never try to push the buttons on the side of the skateboard controller with your hands while you are standing on it. (5) Use a dry cloth to clean the skateboard controller, never use chemicals. (6) Use the skateboard controller only with the appropriate gaming system for which it was designed. (7) Regularly inspect the skateboard controller. (8) If the skateboard controller functions in an unusual manner or produces smoke, immediately stop use and turn o the power.TROUBLESHOOTING If you encounter problems, try the possible solutions provided below. (1) Make sure the skateboard controller is wirelessly connected to the console. Refer to the instructions on the other side of this hardware manual. (2) Move the skateboard controller closer to the console. (3) Check that the batteries still have some charge. (4) Keep the console and skateboard controller at least two feet away from large metal objects. (5) Make sure the front of the console is positioned in the direction of the skateboard controller. (6) Cordless phones (2.4GHz), wireless LANs, microwave ovens and some cell phones can cause interference. Turn these products o or unplug and try reconnecting the skateboard controller. If none of these solutions work, turn the console o, remove and reinsert the batteries into the skateboard controller and repeat the steps for connecting the skateboard controller to the console.BATTERY SAFETY Incorrect use of batteries may result in battery leakage, overheating or explosion. When using batteries, be sure to follow these instructions:(1) Make sure the positive (+) and negative (-) ends of the batteries are inserted in the correct directions. (2) Keep batteries out of reach of children. (3) Do not mix old and new or dierent types of batteries. Use only appropriate sized batteries. (4) Do not attempt to recharge non-rechargeable type batteries. (5) Remove the batteries when the product will not be used for an extended period of time. (6) If the battery has leaked, be sure to carefully remove all uid with a paper towel before inserting new batteries. Take care to keep all leaked uid from touching your skin or clothes. If uid comes into contact with the skin, ush with water immediately. (7) Dispose of batteries in accordance with local and national disposal regulations.FCC INFORMATION FOR THE CONSUMER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.NOTE: Changes or modications not expressly approved by Activision could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.IC INFORMATION FOR THE CONSUMER This device complies with RSS 210 of Industry Canada (IC). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.PRODUCT DISPOSAL INFORMATION Dispose of this product in accordance with local and national disposal regulations (if any), including those governing the recovery and recycling of waste electrical and electronic equipment (WEEE).LIMITED HARDWARE WARRANTY Activision warrants to the original consumer purchaser of this hardware or accessories (collectively, the “Hardware”) that the Hardware will be free from defects in material and workmanship for 90 days from the date of purchase. If the purchaser nds the Hardware defective within 90 days of original purchase, Activision agrees to replace, free of charge, such Hardware discovered to be defective within such period as long as the Hardware is still being manufactured by Activision. In the event that the Hardware is no longer available, Activision retains the right to substitute a similar product of equal or greater value. Any replacement Hardware will be new or refurbished or serviceably used, at Activision’s option, and comparable in function and performance to the original Hardware. This warranty is limited to the Hardware as originally provided by Activision and is not applicable to normal wear and tear. This warranty shall not be applicable and shall be void if the defect has arisen through abuse, mistreatment, or neglect. This remedy is the purchaser’s sole, exclusive remedy, and is in lieu of all other express warranties. Any implied warranties on this product prescribed by statute, including but not limited to an implied warranty of merchantability or tness for a particular purpose, are expressly limited in duration to the 90-day period described above. Activision reserves the right to modify this warranty prospectively at any time and from time to time in our sole discretion.When returning any Hardware for warranty replacement, please visit http://warranty.thride.com for information on initiating and completing the warranty replacement process. For all warranty replacements, send the battery cover to the Hardware (i.e., do not send the entire skateboard controller) with suitable protective packaging (e.g., bubble wrap or other cushioned packaging), and include: (1) a photocopy of your dated sales receipt; (2) your name and return address typed or clearly printed; and (3) your Return Materials Authorization (“RMA”) number or other information provided to you from our warranty system (if you have initiated a claim via such system).NOTE: Certied mail is recommended.For customers in North America: Send warranty replacement claims to Activision Hardware Warranty Warehouse, Attention: Returns, 7800 The Blus, Suite C, Austell, GA 30168.LIMITATION ON DAMAGES. IN NO EVENT WILL ACTIVISION BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE HARDWARE OR ANY ASSOCIATED EQUIPMENT, COST OF ANY SUBSTITUTE EQUIPMENT, CLAIMS OF THIRD PARTIES, INJURY TO PROPERTY, AND LOSS OF GOODWILL. SOME STATES/COUNTRIES DO NOT ALLOW (1) THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR (2) LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATIONS AND/OR EXCLUSION OR LIMITATION OF LIABILITY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION.ENGLISHpWi®™Position skateboard controller on oor pointed toward the TV. Stand on top of the skateboard controller and comfortably position feet so that the Tony Hawk®: RIDE™ logo is in front of you as seen in the image below. Make sure there is at least 4 feet of clearance around the skateboard controller. Refer to the software manual for further instructions on alternate playing positions.Now… get ready to RIDE!For use on non-carpeted surfaces, apply the provided protective stickers to the bottom of skateboard controller as shownPRT-0000.268.US

Navigation menu