Actiway Electronics MSM2050V2 Wireless Remote Controller for Motorcycle Stereo Audio User Manual Manual

Shenzhen Actiway Electronics Co.Ltd. Wireless Remote Controller for Motorcycle Stereo Audio Manual

Contents

Manual

三键遥控器使用说明书 Three keys remote control using instructions  一,  技术参数: Specification: Working frequency:工作频率:    433.92MHz±150KHz Modulation mode:调制方式:    OOK 发射功率:    <10mW Working voltage:工作电压:    DC3V(2302 纽扣电池) Working current:  工作电流:    <8mA Enclode mode:  编码方式:     LX2260  1.2M  二,  使用方法 Using instructions Push down the    key+ on the remote, the transmitted LED will light at the same time , the transmitted signal is D3. Push off the key, transmitting will tranmilated and the LED will light off. 按下遥控器 +  键,发射指示灯亮,同时发射数据为 D3 的信号,放开按键,遥控器停止发射,指示灯熄灭。 Push down the key – on the remote, the transmitted LED will light at the same time , the transmitted signal is D2. Push off the key, transmitting will tranmilated and the LED will light off.
按下遥控器 - 键,发射指示灯亮,同时发射数据为 D2 的信号,放开按键,遥控器停止发射,指示灯熄灭。 Push down the key     on the remote, the transmitted LED will light at the same time , the transmitted signal is D1. Push off the key, transmitting will tranmilated and the LED will light off. 按下遥控器  键,发射指示灯亮,同时发射数据为 D1 的信号,放开按键,遥控器停止发射,指示灯熄灭。 三,  注意事项 Notation: Replace the battery if the remote distance becomes short or the LED light becomes dim. 若发射距离变近或指示灯变暗,请及时更换电池。

Navigation menu