Actiway Electronics MSM2050V2 Wireless Remote Controller for Motorcycle Stereo Audio User Manual Manual

Manual

三键遥控器使用说明书

Three keys remote control using instructions

一，技术参数：

Specification:

Working frequency:工作频率： 433.92MHz±150KHz

Modulation mode:调制方式： OOK

发射功率：＜10mW

Working voltage:工作电压： DC3V（2302 纽扣电池）

Working current: 工作电流：＜8mA

Enclode mode: 编码方式： LX2260 1.2M

二，使用方法

Using instructions

Push down the key+ on the remote, the transmitted LED will light at the

same time , the transmitted signal is D3. Push off the key, transmitting

will tranmilated and the LED will light off.

按下遥控器 + 键，发射指示灯亮，同时发射数据为 D3 的信号，放

开按键，遥控器停止发射，指示灯熄灭。

Push down the key – on the remote, the transmitted LED will light at the

same time , the transmitted signal is D2. Push off the key, transmitting

will tranmilated and the LED will light off.

按下遥控器 - 键，发射指示灯亮，同时发射数据为 D2 的信号，放

开按键，遥控器停止发射，指示灯熄灭。

Push down the key on the remote, the transmitted LED will light at

the same time , the transmitted signal is D1. Push off the key, transmitting

will tranmilated and the LED will light off.

按下遥控器键，发射指示灯亮，同时发射数据为 D1 的信号，放

开按键，遥控器停止发射，指示灯熄灭。

三，注意事项

Notation:

Replace the battery if the remote distance becomes short or the

LED light becomes dim.

若发射距离变近或指示灯变暗，请及时更换电池。