Actiway Electronics MSY2050 MOTORCYCLE AND YACHT AUDIO SYSTEM User Manual

user manual

Three keys remote control using instructions

一， Specification:

Working frequency: 433.92MHz±150KHz

Modulation mode: OOK

Transmitted power：＜10mW

Working voltage:： DC3V（2302 纽扣电池）

Working current: ＜8mA

Enclode mode: LX2260 1.2M

二， Using instructions

Push down the key+ on the remote, the transmitted LED will light at the

same time , the transmitted signal is D3. Push off the key, transmitting

will tranmilated and the LED will light off.

Push down the key – on the remote, the transmitted LED will light at the

same time , the transmitted signal is D2. Push off the key, transmitting

will tranmilated and the LED will light off.

Push down the key on the remote, the transmitted LED will light at

the same time , the transmitted signal is D1. Push off the key, transmitting

will tranmilated and the LED will light off.

三， Notation:

Replace the battery if the remote distance becomes short or the

LED light becomes dim.

FCC Caution: Any changes or modifications not expressly approved by

the party responsible for compliance could void the user's authority to

operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.