Actwell Technology ACT-203TX Wireless Control Security/Alarm Transmitter Camera User Manual Part 1

Download:
Mirror Download [FCC.gov]
Document ID	473700
Application ID	R1Z7j8UaGq2hS9EX5OBf9Q==
Document Description	Users Manual Part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	161.35kB (2016823 bits)
Date Submitted	2004-09-28 00:00:00
Date Available	2004-09-28 00:00:00
Creation Date	2004-09-17 14:11:13
Producing Software	Adobe PDF Library 5.0
Document Lastmod	2004-09-28 02:15:58
Document Title	Users Manual Part 1
Document Creator	HP PDF Formatter version 1.0.0.229

~,
Fe CEO681(i)
..
...
Edition
First edition, September 2004
Copyright information
This publication, including all photographs, illustrations and software, is
protected under international copyright laws, with all rights reserved. Neither this
manual, nor any of the material contained herein, may be reproduced without
written consent of the author.
',\
.~.\
.~
@ September, 2004
'-<
Trademarks
All product names used in this manual are the properties of their respective
owners and are acknowledged.
'>""::
Safety and battery use
..
Read and follow any warnings in this manual.
When not in use, remove any batteries and store them in a cool dry place.
Don't dispose of used batteries with household waste. Return the batteries to
your dealer or to a special disposal service.
Read the regulatory compliance notice on page 22.
Do not use the camera in temperatures below -10 or exceeding 55 degrees
Celsius
Any servicing must only be done by qualified personnel.
Do not set up or use the receiver or camera in a wet or damp environment.
Save these instructions for future reference.
About this manual
This manual is designed to assist users with setting up and operating #ACT-203TX
/#ACT-205TX 2.4GHz wireless remote security alarm camera system.
Information in this document has been carefully checked for accuracy; however,
no guarantee is given as to the correctness of the contents. The information
contained in this document is subject to change without notice.
11
Table of contents
I-GETTING STARTED
CHECKINGTHEPACKINGLIST
IDENTIFYINGPARTS
Camera
Receiver
2-SETTIN G UP
"""""""""""""""""
PRE-SETUPTESTING
MAKINGCONNECTIONS
Receiver setup
Connecting the AC adapter to the camera
Connecting the battery to the camera
MOUNTINGOPTIONS
Ceiling installation
Wall installation
Hidden installation
ADJUSTING
12
14
THE CAMERA ANGLE
3-0PERATION
OPERATING RESTRICTIONS
15
15
MATCHINGCHANNELS
STANDARD ALWAYS-ONOPERATION
16
16
17
REED SWITCH OPERATION """""""""""""""""""""""""""""'"
Reed switch installation
17
Set to NO (Normal Open)
Set to NC (Normal Closed)
R/C CABLEOPERATION
SWITCHINGAUDIOOUTPUT
17
17
18
18
iii
APPENDIX
CLEANING
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
21
Camera
21
Receiver
21
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
WARRANTY
IV
..19
19
19
22
23
1-Getting started
Congratulations on your purchase of the remote camera. Use this camera to monitor
locations wirelessly, as a stand-alone solution or integrated into an existing alarm
system.
Checking the packing list
Carefully unpack the projector and check that the following items are included:
$i
--
Receiver
Camera with dome cover
Receiver AC adapter
Camera AC adapter
RlC cable
Sensor cable
I-GETTING
STARTED
Checking the packing list (continued)
tJ
..