Adams Rite 80 0180 200_E 4590, 4591 Deadlatch Paddles Installation Instructions 4590 200 E

User Manual: Adams Rite 4590, 4591 Deadlatch Paddles Installation Instructions Installation Instructions

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadAdams Rite 80-0180-200_E 4590, 4591 Deadlatch Paddles Installation Instructions 4590 80-0180-200 E
Open PDF In BrowserView PDF
STEP 1

+1/32

.265 -0 DIA
(6,73) +0,79
-0
(2) HOLES

1.25 HOLE
(31,75)

INSTALLATION

STEP 2

1.718
(43,64)

CL
CYLINDER

DRIVE PLATE
DRIVE EARS

3.000
(76,20)

BINDER
POSTS

STEP 4

STEP 3

PADDLE ASSY.

ESCUTCHEON
ASSY.

4580
CAM DISC
SET SCREWS

BINDER
POSTS

LABEL

LATCH
CUTOUT

PIVOT PIN

BACKSET OF
DEADLATCH

SET SCREW

SCREW &
LOCKWASHER

CL

1.PREPARE STILE AS SHOWN.
2.INSERT BINDER POST THRU .265 DIA. HOLE
IN STILE.
3.SECURE BINDER POST WITH 1/4-28 NUT.

1.INSTALL ESCUTCHEON ASSY.
2.USING 8-32 SCREWS W/LOCKWASHER,
SECURE ESCUTCHEON ASSY. TO
BINDER POST.
IMPORTANT,
TIGHTEN THESE SCREWS SECURELY.

1.INSTALL 4500, 4700 AND 4900 SERIES
DEADLATCH PER MOUNTING INSTRUCTIONS.
2.INSTALL 4580 CAM DISC ASSY.
SECURE WITH SETSCREW.

(CAUTION: DO NOT OVERTIGHTEN NUT)

INSTRUCTIONS FOR CHANGING HAND

1.INSTALL PADDLE ASSY. ALIGN DRIVE EARS
ON PADDLE WITH SLOT IN DRIVE PLATE.
2.INSTALL PIVOT PIN.
3.INSTALL PIVOT PIN SET SCREW. TIGHTEN
SET SCREW FLUSH WITH BOTTOM OF
ESCUTCHEON.

SEE REVERSE FOR CAM DISC ASSY.
DRIVER SCREW

TOP

DRIVER PLATE

DRIVER
SCREW

PULL TO LEFT
OUTSIDE
RH

DRIVER
SCREW

PUSH TO LEFT
RHR

PULL TO RIGHT
LH

SPRING

PUSH TO RIGHT
LHR

KEEPER

INSIDE

1.FIND DESIRED CONFIGURATION.
www.adamsrite.com

Phone: 800-626-7590
800-872-3267
Fax: 866-582-4641
800-232-7329

2.REMOVE KEEPERS TO SEE LOCATION
OF SPRINGS & DRIVER PLATE.

3.REVERSE SPRINGS & DRIVER
PLATE IF NECESSARY.

4.REMOVE DRIVER SCREW IF NECESSARY,
AND PLACE IN DESIRED LOCATION.

80-0180-200
Rev.

E

5.REPLACE KEEPERS.
6.CONFIGURE CAM DISC.
(SEE REVERSE)

4590 PADDLE OPERATOR
Ecn 11955A

Date: 06-19-12

Page 1 of 2

Appvd: MP

Date: 06-19-12

4580 CAM DISC HANDING
LOOKING AT THE EDGE OF THE DOOR, DETERMINE ON WHICH
SIDE THE HANDLE OR OTHER OPERATOR IS TO BE INSTALLED.

ON THIS SIDE

ON THIS SIDE

THE CAM DISC MUST BE
HANDED AS SHOWN.

THE CAM DISC MUST BE
HANDED AS SHOWN.

INSTRUCTIONS FOR CHANGING HAND OF 4580 CAM DISC
STEP 2

STEP 1

STEP 3

SNAP THE RETAINER CLIP
INTO THE GROOVE ON THE
CAM PIVOT PIN.

REMOVE THE
RETAINER CLIP
DO NOT REMOVE
THE DRIVER PIECE
PULL THE CAM PIVOT PIN OUT
OF THE CAM DISC AS SHOWN.
www.adamsrite.com

Phone: 800-626-7590
800-872-3267
Fax: 866-582-4641
800-232-7329

TURN THE CAM OVER AND PUSH
THE CAM PIVOT PIN THRU THE
CAM AND INTO THE CAM DISC
AS SHOWN.

4591 PADDLE OPERATOR
80-0180-200

STEP 4

Rev. E

INSTALLATION INSTRUCTIONS
ECN: 11955A

Date: 06-19-12

Page 2 of 2

Appvd: MP

Date: 06-19-12
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : dolid\dolid (DOLID)
Create Date                     : 2012:07:06 11:06:08-07:00
Modify Date                     : 2015:05:27 13:49:49-07:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:05:27 13:49:49-07:00
Creator Tool                    : SolidWorks 2011 SP5.0 (2011272)
Document ID                     : uuid:78e8a234-7b78-4fdf-8187-2d27829bf20a
Instance ID                     : uuid:8ad55118-0a83-4fd6-856d-d0e99246466d
Format                          : application/pdf
Title                           : 80-0180-200_E
Creator                         : dolid\dolid (DOLID)
Producer                        : SolidWorks PDF Publisher
Page Mode                       : UseOutlines
Page Count                      : 2
EXIF Metadata provided by EXIF.tools

Navigation menu