Adams Rite 2015 Full Line Catalog Rite2015Catalog.compressed

User Manual: Adams Rite 2015 Adams Rite Full Line Catalog Catalog

Open the PDF directly: View PDF PDF.
Page Count: 179 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Table of Contents
Deadlocks
PRODUCT SECTION &
PAGE NUMBER
RITE Touch® Digital Glass Door Lock DL-1 – DL-2
1830 Series Bottom Rail Deadlock (Swing Bolt) DL-3 – DL- 4
1837 Series MS® Two-Point Deadlock DL-5 – DL- 6
MS1847 Series MS® Deadlock/Deadlatch DL-7 – DL- 8
MS1850S Series MS® Deadlock DL-9 – DL-10
MS1850S-050 Series MS® Deadlock DL-11 – DL-12
MS-1850SN Series MS® Deadlock (ANSI Size) DL-13 – DL-14
MS1850SN-050 Series MS® Deadlock (ANSI Size) DL-15 – DL-16
MS1861 Series MS® Bottom Rail Deadbolt DL-17 – DL-18
1875 Two-Point Deadlock DL-19 – DL-20
MS+1890 Series MS® Deadlock/Deadlatch DL-21 – DL-22
MS1950 Series MS® Deadlock DL-23 – DL-24
MS1950-050 Series MS® Deadlock DL-25 – DL-26
Dual Force® 2190 Interconnected Deadbolt/Deadlatch DL-27 – DL-28 Fold-out
Dual Force® 2290 Interconnected Deadbolt/Deadlatch DL-29 – DL-30 Fold-out
2331 Heavy Duty Deadbolt DL-31 – DL-32
4070 Series Short Throw Deadbolt (Projection Style) DL-33 – DL-34
4189, 4190 Flush Locksets (Including Deadlock) DL-35 – DL-36
4430, 4431 Flush Locksets (Including Deadlock) DL-37 – DL-38
5017 Wood Door Deadlock/Deadlatch DL-39 – DL-40
Options & Accessories for Deadlocks DL-41 – DL- 42
Deadlatches
PRODUCT SECTION &
PAGE NUMBER
Steel Hawk 4300 Electrified Deadlatch (eLatch) DA-1 – DA-2 Fold-Out
4510 Standard Duty Deadlatch DA-3 – DA-4
4530 Standard Duty Deadlatch DA-5 – DA-6
4781 Two-Point Deadlatch with Paddle DA-7 – DA-8
4900 Heavy Duty Deadlatch DA-9 – DA-10
4920AN Heavy Duty Deadlatch (ANSI Size) DA-11 – DA-12
Options & Accessories for Deadlatches DA-13 – DA-14
Flushbolts & Pivots
PRODUCT SECTION &
PAGE NUMBER
1870 Cylinder-Operated Flushbolt FP-1 – FP-2
1870HM Cylinder-Operated Flushbolt FP-3 – FP-4
1877 Cylinder-Operated Flushbolt FP-5 – FP-6
MS1880, MS1881 Two-Point Flushbolts FP-7 – FP-8
MS2180 Auto-Release Two-Point Flushbolt FP-9 – FP-10
B1921, B1923 Reinforcing Pivots FP-11 – FP-12
Options & Accessories for Flushbolts FP-13 – FP-14
Exit Devices
PRODUCT SECTION &
PAGE NUMBER
3100 Series (Fire-Rated)
8100 Series (Life-Safety)
Surface Vertical Rod Exit Devices
ED-1 – ED-2
Fold-Out
8200 Series (Life-Safety)
Narrow Stile Surface Vertical Rod Exit Device ED-3 – ED-4
3300 Series (Fire-Rated)
8300 Series (Life-Safety)
Mortise Exit Device
ED-5 – ED-6
Fold-Out
8400 Series (Life-Safety)
Narrow Stile Mortise Exit Device ED-7 – ED-8
3600 Series (Fire-Rated)
8500 Series (Life-Safety)
Metal Door Concealed Vertical Rod Exit Device
ED-9 – ED-10
Fold-Out
8600 Series (Life-Safety)
Narrow Stile Concealed Vertical Rod Exit Device ED-11 – ED-12
3700 Series (Fire-Rated)
8700 Series (Life-Safety)
Rim Exit Device
ED-13 – ED-14
Fold-Out
8800 Series (Life-Safety)
Narrow Stile Rim Exit Device ED-15 – ED-16
3900 Series (Fire-Rated)
8900 Series (Life-Safety)
Wood Door Concealed Vertical Rod Exit Device
ED-17 – ED-18
Fold-Out
Options & Accessories for Exit Devices ED-19 – ED-20
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TABLE OF CONTENTS 1
Electric Strikes
PRODUCT SECTION &
PAGE NUMBER
7100, 7101 Electric Strikes ES-1 – ES-2
7110, 7111 Electric Strikes ES-3 – ES-4
7130, 7131 Electric Strikes ES-5 – ES-6
7140 Electric Strike ES-7 – ES-8
7160 Electric Strike ES-9 – ES-10
7170 Electric Strike ES-11 – ES-12
7240 Fire-Rated Electric Strike ES-13 – ES-14
7270 Fire-Rated Electric Strike ES-15 – ES-16
UltraLine 7400, 7401 Electric Strikes ES-17 – ES-18
UltraLine 7410, 7411 Electric Strikes ES-19 – ES-20
UltraLine 7430, 7431 Electric Strikes ES-21 – ES-22
UltraLine 7440 Electric Strike ES-23 – ES-24
UltraLine 74R1 Electric Strike ES-25 – ES-26
UltraLine 74R2 Electric Strike ES-27 – ES-28
Options & Accessories for Electric Strikes ES-29 – ES-30
Trim
PRODUCT SECTION &
PAGE NUMBER
1000 Series Turns T-1 – T-2
3080 Series Entry Trim T-3 – T-4 Fold-Out
eForce® - 150, 3090 Keyless Entry T-5 – T-6
eForce® - 3090P, 3090C Keyless Entry T-7 – T-8
A100-3090H Keyless Entry Control and Asperio® Hub T-9 – T-10
4550 MS® Deadlock Lever T-11 – T-12
4560, 4565 Deadlatch Handles T-13 – T-14
4568, 4569 Eurostyle Deadlatch Handles T-15 – T-16
4590 Deadlatch Paddle T-17 – T-18
4591 Deadlatch Paddle T-19 – T-20
4600 Heavy Duty Designer Deadlatch Handles T-21 – T-22
Cylinders
PRODUCT SECTION &
PAGE NUMBER
4024, 4025, 4026 Cylinder Pulls C-1 – C-2
4036 Mortise Cylinder & 4066 Thumbturn C-3 – C-4
MS4043 Cylinder Guard C-5 – C-6
Accessories
PRODUCT SECTION &
PAGE NUMBER
4000 Series MS® Deadlock Strikes A-1 – A-2
4015 Threshold Bolt A-3 – A-4
4016 Header Bolt A-5 – A-6
4085 Header Bolt (Pairs of Doors Only) A-7 – A-8
4089 Exit Indicator A-9 – A-10
4800 Series Strikes A-11 – A-12
4901, 4902 Deadlatch Strikes A-13 – A-14
Lock Mounting Methods A-15
Power
PRODUCT SECTION &
PAGE NUMBER
PS-SE Power Supply P-1 – P-2
PS-1 Power Supply P-3 – P-4
PS-LR Power Supply P-5 – P-6
Transformer, Rectifier, and Piezo Horn P-7 – P-8
4612 Power Transfer Device P-9 – P-10
General Info
PRODUCT SECTION &
PAGE NUMBER
Terms & Icon Glossary GI-1 – GI-2
Architectural Finishes GI-3
Handing of Doors GI-4
Adams Rite Limited Warranty & General RMA Procedure GI-5
LEED Certification GI-6
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
2TABLE OF CONTENTS
RITE Touch®
RT1050D Digital
Glass Door Lock
Features
• Battery-operated lock uses 4 AA alkaline batteries
• Expected battery life is 1 year based on 10 daily uses
• Operating temperature 5°F to 130°F (-15°C to 55°C)
• Programming via touch-screen
• RITE Touch will support up to 40 credential cards (extra
cards available seperately)
Operation
The surface-mounted lock features two options for credential
actuation on the secure side of the door: either by entering
a user code using a touch-screen or by using provided
Mifare credential cards. The lock features dual unlock from
the inside of the door, either by thumbturn or by using an
override button.
Specifications
DOOR THICKNESS
• 7/16" to 1/2" thick glass doors, indoor applications only.
LOCK BODY
• The RITE Touch RT1050D comes in an elegant
mirrored finish.
• Front Body: 9/16" x 2-7/8" x 7-5/16"
• Back Body: 1-15/16" x 3-1/16" x 7-1/2"
BOLT
• Twin bolts measuring 13/32" diameter with 1-1/8" throw.
Bolt Extensions included separately in standard package
for larger door gap, including twin bolts with 2-1/8" throw.
STRIKE
• Surface-mounted strike plate for double glass doors
provided.
OPTIONS
• The RITE Touch RT1050D is designed for single or double
glass doors. The surface-mounted strike is provided for
double door applications. Extra credential cards available
in packs of 5.
STANDARD PACKAGE
• Individually boxed with mounting plate, AA batteries (x4),
credential cards (x4), single door magnet, bolt extensions,
thin door plate, and mounting screws. Shipping weight: 6 lbs.
RITE TOUCH®
RT1050D DIGITAL GLASS DOOR LOCK
FULL GLASSELECTRIFIED
PRODUCT
The surface-mounted RITE Touch RT1050D provides flexible,
keyless access control for single or double all-glass doors.
Function
The RITE Touch RT1050D is a digital door lock that provides keyless access
control for all-glass openings. The RITE Touch offers sophisticated styling,
convenience, flexible access control, and safety and security for single or
double glass doors. Perfect for indoor applications, the easy to install surface-
mounted RITE Touch RT1050D combines elegant aesthetics with the latest
touch screen technology, to harmonize style and security.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-1
RITE TOUCH®
RT1050D DIGITAL GLASS DOOR LOCK
Dimensions
HOW TO ORDER RT1050D RITE TOUCH DIGITAL GLASS DOOR LOCK
Specify quantity and the following information.
RITE TOUCH MODEL
RT 1050D
1050D For single or double doors
3/16"
4.8mm
1-39/64"
40.9mm
7-21/64"
186.1mm
7-1/2"
190.5mm
2-55/64"
72.6mm
5/32"
4mm
1-51/64"
45.6mm
1-1/2"
38.1mm
1-59/64"
48.8mm
31/64"
12.3mm
31/64"
12.3mm
9/16"
14.3mm
9/16"
14.3mm
3/32"
2.4mm
7-21/64"
186.1mm 7-1/2"
190.5mm
3-1/16"
77.8mm
1/16"
1.6mm
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories
Extra credential card 5 pack (RT-5C-1050).
LOCKBODY
STRIKE PLATE
DL-2 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
1830 Bottom Rail
Deadlock (Swing Bolt)
Operation
360° turn of key or thumbturn throws or retracts the
counterbalanced bolt. Key can be removed only when bolt is
in a positively locked or unlocked position. Lock accepts any
standard 1-5/32" mortise cylinder from either or both sides.
Cylinder must have MS® dimensioned cam.
Specifications
CYLINDER HEIGHT (BACKSET)
• 31/32" and 1-1/8" only.
CASE
• Steel with corrosion-resistant plating, measures 1" x 6" x
depth (depth varies with cylinder height).
BOLTS
• 15/32" x 5/8" x 2-1/8" with 5/8" throw. Six-ply laminated
steel with eight plys within case. Center ply has alumina-
ceramic core to deter hacksaw attack.
STRIKE
• See back page for dimensions of strike slot which can be
cut in metal thresholds. 4006 strike (shown) is available
separately, with stainless steel trim plate and plastic box.
CYLINDER CAM
• 1830 Bottom Rail Deadlocks are operable by any
standard 1-5/32" diameter mortise cylinder with MS® cam,
dimensioned as shown. Cylinders with MS® cams can be
readily obtained from most cylinder manufacturers. See
CYLINDERS section for cylinder make, thumbturn and
trim ring information.
OPTIONS
• Specify either 31/32" or 1-1/8" cylinder height (see
dash table). 4006 strike and cylinder(s) available
separately, if required.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns are available separately.
Shipping weight: 1-1/2 lbs.
1830 BOTTOM RAIL DEADLOCK (SWING BOLT)
FULL GLASSALUMINUM GRADE 1
E8211
The 1830 Bottom Rail Deadlock provides bottom rail locking
in ultra-narrow stile or tempered glass doors. Tamper-proof
with an armored faceplate, it protects with a minimum
threshold strike opening.
Function
For bottom rail locking of ultra-narrow stile or tempered glass doors whose
bottom rail (shoe) is too shallow for the MS1861 Bottom Rail Deadbolt (see
DEADLOCKS). Mechanism is that of the MS1850 Deadlock, but with the bolt
size reduced. This keeps the threshold strike opening to a practical minimum,
avoiding collection of debris or snagging on high-heeled shoes. Armor
faceplate protects cylinder setscrews from tampering and keeps them from
loosening. Not applicable to wood doors.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
4006 STRIKE
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-3
6-3/8"
161.9mm
2-5/16"
58.7mm
3/8"
9.5mm
1/4"
6.4mm
21/32"
16.7mm
1"
25.4mm
1-3/8"
34.9mm
1/2"
12.7mm
1-1/2"
38.1mm
5/8"
15.9mm
5/64"
2mm
9/16"
14.3mm
1/2"
12.7mm
3/8"
9.5mm
2"
50.8mm
2-3/4"
69.9mm
29/64"
11.5mm
2-3/16"
55.6mm 1-3/4"
44.5mm
1/2"
12.7mm
1-11/32"
34.1mm
6-3/8"
161.9mm
1-1/4"
31.8mm
(2 PLCS)
CYLINDER
CYLINDER
HEIGHT
TUBE
SPACER
TUBE SPACERS
MAY BE REQ’D
TO POSITION
LOCK
MIN. CHANNEL
DEPTH: “A” + 1/32"
10-32
DRILL & TAP
(2 PLCS)
10-32
MACHINE
SCREWS
DIA.
6-7/8"
174.6mm
5-31/32"
151.6mm
“A”
THRESHOLD
1830 BOTTOM RAIL DEADLOCK (SWING BOLT)
Dimensions
4006 Strike Dimensions
Stile & Threshold Preparation
Lock & Cylinder
Installation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders
4006 strike.
Cylinder guards.
1830 Bottom Rail Deadlocks are operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam.
HOW TO ORDER 1830 BOTTOM RAIL DEADLOCK Specify quantity and the following information. Order related products separately.
PRODUCT NO. DASH NO.
(SPECIFY FOR CYLINDER HEIGHT AND LOCK DEPTH) FINISH
1830 -02 -628
02 Cylinder Height 31/32" Dim. "A" 1-5/8" 628 Clear Anodized
03 Cylinder Height 1-1/8" Dim. "A" 1-25/32" 313 Dark Bronze Anodized
DASH NO.
CYLINDER
HEIGHT DIM. A
-02 31/32"
24.6mm
1-5/8"
41.3mm
-03 1-1/8"
28.6mm
1-25/32"
45.2mm
DL-4 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS1837 Series MS®
Two-Point Deadlock
Operation
360° turn of key or thumbturn throws counterbalanced
bolt into opposite door and drops bolt into threshold. Key
can be removed only when bolts are in a positively locked
or unlocked position. Lock accepts any standard 1-5/32"
diameter mortise cylinder from either or both sides. Cylinder
must have MS® dimensioned cam.
Specifications
CYLINDER BACKSET
• 1-1/2" only.
CYLINDER HEIGHT
• 36" standard. Other heights available on special order.
CASE
• Steel with corrosion-resistant plate, measures 1" x 6" x
2-3/16".
PIVOTED BOLT
• 5/8" x 1-3/4" x 2-7/8" with 1-3/8" throw. Eight-ply laminated
steel with alumina-ceramic core to deter hacksaw attack.
THRESHOLD BOLT
• Hexagonal 3/8", flat to flat. Stainless steel.
ARMORED FACEPLATE
• Flat, two-piece plate extends to bottom of door. Standard
finish is US28 (628) Clear Anodized.
STRIKE
• For MS bolt, a 4001-011 strike plate with dust box is
furnished. Threshold bolt strike can be 1/2" diameter hole
in metal threshold or, if threshold is wood, 4005 strike is
available as an option.
CYLINDER CAM
• 1837 Two-Point Deadlocks are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam,
dimensioned as shown. Cylinders with MS® cams can be
readily obtained from most cylinder manufacturers. See
CYLINDERS section for cylinder make, thumbturn and
trim ring information.
STANDARD PACKAGE
• Basic MS lock individually boxed with mounting screws.
Hexbolt and rod packed separately with face extension
plate, screws, bottom bolt guide, and attachment pin.
Cylinders and/or thumbturns available separately.
Shipping weight: 3 lbs.
MS1837 SERIES MS® TWO-POINT DEADLOCK
WOOD GRADE 1
E8241
Maximum security for wood door pairs is provided with the
MS1837 Two-Point Deadlock. A single turn drops a bolt
into the threshold and pivots the MS bolt.
Function
Maximum security for wood door pairs by a single turn of a key is provided
with the MS1837. Simultaneously dropping a stainless steel hexbolt into the
threshold and pivoting the massive MS bolt into the opposite leaf, the MS1837
eliminates inconvenient and sometimes forgotten flushbolts in the inactive leaf.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-5
MS1837 SERIES MS® TWO-POINT DEADLOCK
Dimensions Installation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders
4005 trim strike for wooden threshold. MS1837 Two-Point Deadlocks are operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam.
HOW TO ORDER MS1837 SERIES MS® TWO-POINT DEADLOCK
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FINISH
MS1837 -313
313 Dark Bronze Anodized 626 Satin Chrome
335 Black Anodized 628 Clear Anodized
605 Bright Brass
If cylinder height other than 36" is required, specify exact height from bottom of door to cylinder center.
1-1/4"
31.8mm 2-1/4"
57.2mm
1-1/2"
38.1mm
36"
914.4mm
63/64"
25mm
8"
203.2mm
30-5/32"
766mm
3/4"
19.1mm
3-1/4"
82.6mm
5/8"
15.9mm
63/64"
25mm
BACKSET
STANDARD
CYLINDER
HEIGHT
DOOR
BOTTOM
BOLT
GUIDE
BOLT
PROJECTION
#6 X 3/4"
FLAT HEAD
WOOD
SCREWS (6)
#12 X 3"
FLAT HEAD
WOOD
SCREW
#8-32 X 1/4"
FLAT HEAD
MACHINES
SCREWS (3)
#12 X 1-1/4"
FLAT HEAD
WOOD SCREW
FACEPLATE
LOCK
MOUNTING
PLATE
INSTALL ADAPTOR ARM IN
LOCK FROM REAR WITH BOLT
RETRACTED AS SHOWN.
DRIVE PIN THROUGH SLOTS
IN LOCK SIDE PLATES,
PASSING THROUGH HOLE IN
THE ADAPTOR ARM.
1/8"
3.2mm
1/8"
3.2mm
2-1/8"
54mm
7/8"
22.2mm
1"
25.4mm
1"
25.4mm
1-1/4"
31.8mm
1-1/4"
31.8mm
7/8"
22.2mm
3-3/8"
85.7mm
1/4"
6.4mm
1/2"
12.7mm
1-1/4"
31.8mm
1/2"
12.7mm
1-1/2"
38.1mm
10-1/2"
266.7mm
2-5/16"
58.7mm
DIA.
DIA.
BOLT
GUIDE
NOSE
OF
DOOR
#8 X 1"
FLAT HEAD
WOOD
SCREWS (3)
DOOR
DL-6 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS1847 Series MS®
Deadlock/Deadlatch
Operation
Can be operated by a standard cylinder, so the glass door
may be keyed-in with other types of doors. Three hub slot
positions allow installation even where jamb and stile design
provides severely limited turn clearance.
Specifications
LATCH VERSION
• The same stainless steel hookbolt, but spring-loaded
for automatic latching, is provided by the MS1847-11
and MS1847-13. All dimensions and available
accessories for the MS1847 deadlocks also apply to
MS1847 deadlatches.
CASE
• Stainless steel, measures 1/2" x 3-3/16" x 1-1/8".
ANTI-LIFT BOLT
• Three-ply laminated stainless steel. Designed to withstand
approximately one-half ton force, either horizontal or
vertical. Anti-lift bolt stops both door-from-jamb pry bar
attacks and attempts to lift the door from its track.
FACE
• Rectangular or full radiused ends (see table on back of
page for dash numbers).
STANDARD PACKAGE
• Case-packed with machines screws for mounting.
Shipping weight: 1/3 lb.
MS1847 SERIES MS® DEADLOCK/DEADLATCH
The MS1847 Deadlock/Latch for ultra-narrow stile siding
doors features a self-protecting bolt with adjustable
bolt projection.
Function
A compact lock designed to fit within very narrow sliding door stiles without
compromising the high degree of security these doors need. The sturdy
stainless steel bolt has two important features not usually found in sliding
door hardware. First, it is adjustable: a full 3/16" lengthening or shortening of
bolt projection is possible by turning an exposed screw in the face of the lock.
This can compensate for considerable misalignment between door and jamb.
Second, the MS1847 bolt is self-protecting: if the door is closed with the bolt in
the locked position, the bolt will retract immediately on contact with the jamb,
thus preventing damage or accidental lock-out.
FULL GLASSALUMINUM GRADE 1
E8291
MS1847
MS1847-02
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-7
1-1/8"
28.6mm 3/32"
2.4mm
3/8"
9.5mm
5/32"
4mm
13/64"
5.2mm
1-31/32"
50mm
45˚
3/4"
19.1mm
27/64"
10.7mm
3-3/16"
81mm
17/32"
13.5mm
3-11/16"
93.7mm
3/8"
9.5mm
3-7/32"
81.8mm
3-11/16"
93.7mm
15/64"
6mm
17/32"
13.5mm
25/32"
19.8mm
3/8"
9.5mm
1"
25.4mm
3/16"
4.8mm
1-1/16"
27mm
4-1/32"
102.4mm
11/64"
4.4mm
3/16"
4.8mm
7/64"
2.8mm
11/16"
17.5mm
17/64"
6.7mm
1/4"
6.4mm
ADJUSTMENT
MAX.
MIN.
MIN.
FULL
RADIUS
TYP.
SEE DASH
NUMBERS
FOR VARIOUS
HUB ANGLES
LOCK & STILE
DRILL AND
CSK FOR
#6 SCREW
(2 PLCS)
SEE DASH NUMBER
FOR SQUARE OR
RADIUS ENDS
NOTE: DIMENSIONS SHOWN
ARE RECOMMENDED MINIMUM
STRIKE
CUTOUT
HUB
HUB
DIA.
TAP #6-32
THREAD TYP.
R
MS1847 SERIES MS® DEADLOCK/DEADLATCH
Dimensions Stile Preparation
Installation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders
Trim strikes. Turns and cylinder pulls.
HOW TO ORDER MS1847 SERIES MS® DEADLOCK/DEADLATCH
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACE SHAPE, HUB ANGLE, LOCK
OR LATCH FINISH
MS1847 -02 -630
(blank) See Configuration Table 630 Satin Stainless
02 See Configuration Table
06 See Configuration Table
09 See Configuration Table
10 See Configuration Table
11 See Configuration Table
13 See Configuration Table
MS1847 LOCK MS1847-02 LOCK MS1847-06 LOCK
MS1847-09 LOCK MS1847-10 LOCK MS1847-11 LOCK
MS1847-13 LOCK
DL-8 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS1850S Series
MS® Deadlock
Specifications
CYLINDER BACKSET
• 7/8", 31/32", 1-1/8", or 1-1/2" only.
CASE
• Steel with corrosion-resistant plating, measures 1" x 6" x
depth. Depth varies by backset (see table on back of page).
BOLT
• 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight-ply laminated
stainless steel. Center ply has alumina-ceramic core to defeat
any hacksaw attack, including rod-type “super” hacksaws.
FACEPLATE
• Measures 1" x 6-7/8"
STRIKE
• See back of page for dimensions of strike slot which can
be cut in metal jamb. Trim plate, box strike, and armored
strike are available separately.
CYLINDER CAM
• MS1850S Deadlocks are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam
dimensioned as shown. Cylinders with MS® cams can
be readily obtained from most cylinder manufacturers.
See CYLINDERS section for cylinder make, thumbturn
and trim ring information.
OPTIONS
• For jambs too narrow to accept the long bolt, the
MS1850S-050 offers a shorter bolt with hook shape to
provide equal security against door-prying attempts.
1850S-020 short throw without hook is also available.
Second and third point locking bolts are available for pairs
of doors. All use any make standard mortise cylinder and
thus can be keyed into systems with other types of doors.
“SCHOOLHOUSE” version, also available, is modified
so that operation from inside is “unlock only”. This lock is
handed and must be specified LH or RH. Specify Series
SCH1850S. Same faceplate and backset options as
Series MS1850S. Operation from inside, with standard
Adams Rite 4066 Turn or with 4550 Deadlock Lever. For
wood or hollow metal, see MS1850SN.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately.
Shipping weight: 1-1/2 lbs.
MS1850S SERIES MS® DEADLOCK
ALUMINUM GRADE 1
E8211
The MS1850S Deadlock utilizes a laminated stainless steel
bolt, activated by a pivot mechanism to provide maximum
security for a single leaf narrow stile door.
Function
A huge bolt of laminated stainless steel, nearly three inches long, activated by an
uncomplicated pivot mechanism, has made this basic MS® Deadlock the standard
of the narrow stile door industry. The length of this bolt provides maximum
security for a single leaf door, even a very tall and flexible one or an installation
where the gap between the door and jamb is greater than it should be.
Operation
360° turn of key or thumbturn throws or retracts the counterbalanced bolt. Key
can be removed only when bolt is in a positively locked or unlocked position. Lock
accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either
or both sides. Cylinder must have MS® dimensioned cam.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-9
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
SHOWN WITH
FLAT FACEPLATE
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
1"
25.4mm
29/64"
11.5mm
53/64"
21mm
29/64"
11.5mm
1/4"
6.4mm
6-3/8"
161.9mm
6-7/8"
174.6mm
6"
152.4mm
6-53/64"
173.4mm
1-13/32"
35.7mm
1/4"
6.4mm
“A”
1-3/8"
34.9mm
11/16"
17.5mm
5/32"
4mm
6-57/64"
175mm 1-1/4"
31.8mm
1-19/32"
40.5mm
1-1/64"
25.8mm
(4 PLCS.)
BACKSET
STILE
DIA. HOLE
R
3-3/8"
85.7mm
59/64"
23.4mm
1"
25.4mm
LOCK & STILE CYLINDER
STRIKE
CUTOUT
MS1850S SERIES MS® DEADLOCK
Dimensions Stile Preparation
Lock & Cylinder
Installation
HOW TO ORDER MS1850S SERIES MS® DEADLOCK
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPL ATE BACKSET HANDING FINISH
MS185 0S - 2 - 10 - 628
0S Flat 1 7/8" 15 LH or RHR 313 Dark Bronze Anodized
1S Radius 2 31/32" 16 RH or LHR 335 Black Anodized
1SW Radius with weatherstrip 3 1-1/8" 10 Non-Handed* 628 Clear Anodized
2S Bevel 4 1-1/2"
*Any flat or radius faceplate, except Schoolhouse.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Special Order Options
4015 Threshold Bolt or 4016 Header Bolt for multi-
point locking.
4085 Header Bolt for pairs of doors.
4000, 4001, MS4002 Deadlock Strikes.
Lock mounting accessories and options.
MS1850S Deadlocks are operable
by any standard 1-5/32" diameter
mortise cylinder with MS® cam.
Deadlock lever trim
and keyless entry trim.
Exit indicators.
Schoolhouse function available as
special order.
BACKSET “A”
7/8"
22mm
1-9/16"
34.7mm
31/32"
24.6mm
1-5/8"
41.3mm
1-1/8"
28.6mm
1-25/32"
45.2mm
1-1/2"
38.1mm
2-1/4"
57. 2mm
ARMORED FACEPLATE
1" X 6-7/8"
FLAT MS1850S
RADIUS MS1851S
RADIUS W/ WEATHERSTRIP
MS1851SW
LH BEVEL MS1852S-X15
RH BEVEL MS1852S-X16
DL-10 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS1850S-050
Series MS® Deadlock
Specifications
CYLINDER BACKSET
• 7/8", 31/32", 1-1/8", or 1-1/2" only.
CASE
• Steel with corrosion-resistant plating, measures 1" x 6" x
depth. Depth varies by backset (see table on back of page).
BOLT
• 5/8" x 1-3/8" with 13/16" throw. Eight-ply laminated stainless
steel. Center ply has alumina-ceramic core to defeat any
hacksaw attack, including rod-type “super” hacksaws, while
hook shape repels pry bar attempts to “spread” the door
from its jamb or lift it off its track.
FACEPLATE
• Measures 1" x 6-7/8".
STRIKE
• See back of page for dimensions of strike slot which can be
cut in metal jamb. Trim plate, box strike, and armored strike
are available separately.
CYLINDER CAM
• MS1850S-050 Deadlocks are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam dimensioned
as shown. Cylinders with MS® cams can be readily obtained
from most cylinder manufacturers. See CYLINDERS section
for cylinder make, thumbturn and trim ring information.
OPTIONS
• Cylinder backset and faceplate finish and shape (radiused, flat
or bevel cross-section to match door nose) must be specified.
“SCHOOLHOUSE” version, also available, is modified
so that operation from inside is “unlock only”. This lock is
handed and must be specified LH or RH. Specify Series
SCH1850S-050. Same faceplate and backset options as
Series MS1850S-050. Operation from inside, with standard
Adams Rite 4066 Trim or with 4550 Deadlock Lever. For
wood or hollow metal, see MS1850SN.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately. Shipping
weight: 1-1/2 lbs.
MS1850S-050 SERIES MS® DEADLOCK
ALUMINUM GRADE 1
E8281/E8291
The MS1850S-050 Deadlock utilizes a laminated stainless
steel hookbolt, activated by a pivot mechanism to provide
maximum security for a sliding narrow stile door.
Function
The MS1850S-050 Deadlock answers the security need of sliding glass doors in
commercial, industrial, and institutional buildings. The mechanism is identical to
the widely used Maximum Security swinging door lock, except that the massive
laminated bolt is provided in a hook shape to resist the parting motion of sliding
door and jamb. The over-center MS locking action assures that forced entry
attempts to pry the door in any direction, up, down, or sideways will be defeated.
Operation
360° turn of key or thumbturn throws or retracts the counterbalanced bolt. Key
can be removed only when bolt is in a positively locked or unlocked position. Lock
accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either
or both sides. Cylinder must have MS® dimensioned cam.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-11
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
SHOWN WITH
FLAT FACEPLATE
“A”
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
6"
152.4mm
6-53/64"
173.4mm
6-3/8"
161.9mm
6-7/8"
174.6mm
13/32"
10.3mm
5/8"
15.9mm
51/64"
20.2mm
1/4"
6.4mm
1/4"
6.4mm
1-15/16"
49.2mm
2-3/16"
55.6mm
11/16"
17.5mm
LOCK & STILE
CYLINDER
STRIKE
CUTOUT
59/64"
23.4mm
BACKSET
LOCKFACE
STILE
1-1/4"
31.8mm DIA. HOLE
6-57/64"
175mm
1-27/32"
46.8mm
1-19/32"
40.5mm
5/32"
4mm
(4 PLCS.)
R
1-1/64"
25.8mm
1"
25.4mm
5/8"
15.9mm
53/64"
21mm
15/64"
6mm
27/64"
10.7mm
MS1850S-050 SERIES MS® DEADLOCK
Dimensions Stile Preparation
Lock & Cylinder Installation
HOW TO ORDER MS1850S-050 SERIES MS® DEADLOCK
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPL ATE BACKSET HANDING FINISH
MS185 0S -2 50 -628
0S Flat 1 7/8" 55 LH or RHR 313 Dark Bronze Anodized
1S Radius 2 31/32" 56 RH or LHR 335 Black Anodized
1SW Radius with weatherstrip 3 1-1/8" 50 Non-Handed* 628 Clear Anodized
2S Bevel 4 1-1/2"
*Any flat or radius faceplate.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Special Order Options
4015 Threshold Bolt or 4016 Header Bolt for
multi-point locking.
4085 Header Bolt for pairs of doors.
Deadlock Strikes.
Lock mounting accessories and options.
MS1850S-050 Deadlocks are operable
by any standard 1-5/32" diameter
mortise cylinder with MS® cam.
Deadlock lever trim and keyless
entry trim.
Exit indicators.
Schoolhouse function
available as special order.
BACKSET "A"
7/8"
22.2mm
1-9/16"
39.7mm
31/32"
24.6mm
1-5/8"
41.3mm
1-1/8"
28.6mm
1-25/32"
44.5mm
1-1/2"
38.1mm
2-1/4"
57. 2mm
ARMORED FACEPLATE
1" X 6-7/8"
FLAT MS1850S-050
RADIUS MS1851S-050
RADIUS W/ WEATHERSTRIP
MS1851SW-050
LH BEVEL MS1852S-055
RH BEVEL MS1852S-056
DL-12 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS1850SN MS®
Series Deadlock
(ANSI Size)
Operation
360° turn of key or thumbturn throws or retracts the
counterbalanced bolt. Key can be removed only when bolt is
in a positively locked or unlocked position. Lock accepts any
standard 1-5/32" diameter mortise cylinder from either or both
sides. Cylinder must have MS® dimensioned cam.
Specifications
CYLINDER BACKSET
• 1-1/2" only.
CASE
• Steel with corrosion-resistant plating, measures 1" x 6" x 2-1/4".
BOLT
• 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight-ply laminated
stainless steel. Center ply has alumina-ceramic core to defeat
any hacksaw attack, including rod-type “super” hacksaws.
STRIKE
• Available in lipped, ANSI-spec version in steel with chrome
finish. See back of page for dimensions of strike slot which can
be cut in metal jamb. Other strikes are available separately.
CYLINDER CAM
• MS1850SN Deadlocks are operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam dimensioned as
shown. Cylinders with MS® cams can be readily obtained
from most cylinder manufacturers. See CYLINDERS section
for cylinder make, thumbturn and trim ring information.
OPTIONS
• Second and third point locking bolts are available for pairs of
steel doors. Shorter “hookbolt” version also available. All use
any make standard mortise cylinder and thus can be keyed
into systems with other types of doors. “SCHOOLHOUSE”
version, also available, is modified so that operation from
inside is “unlock only”. This lock is handed and must be
specified LH or RH. Specify Series SCH1850SN. Same
faceplate and backset options as Series MS1850SN.
Operation from inside, with standard Adams Rite 4066 Turn.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately.
Shipping weight: 1-1/2 lbs.
MS1850SN MS® SERIES DEADLOCK (ANSI SIZE)
HOLLOW
METAL
WOOD GRADE 1
E8211
The ANSI size MS1850SN Deadlock utilizes a laminated
stainless steel bolt, activated by a pivot mechanism to
provide maximum security for hollow metal or wood doors.
Function
For hollow metal or wood doors prepared for hardware according to the
specifications of the American National Standards Institute (ANSI), the
MS1850SN Deadlock provides maximum security and ease of installation.
Its standard 1-1/2" backset dimension provides adequate clearance for the
deep stop on the door jamb of hollow metal entrances.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-13
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
STILE
1/4"
6.4mm
2-9/64"
54.4mm
1-1/4"
31.8mm DIA.
8-1/64"
203.6mm
8"
203.2mm
1-1/4"
31.8mm
1-17/64"
32.1mm
3-3/8"
85.7mm
4-7/8"
123.8mm
53/64"
21mm
1-1/2"
38.1mm
BACKSET
1-1/4"
31.8mm
19/32"
15.1mm
2-7/32"
56.4mm
53/64"
21mm
1-17/32"
38.9mm
7-15/16"
201.6mm
6"
152.4mm
59/64"
23.4mm
11/32"
8.7mm
7-1/4"
184.2mm
1/4"
6.4mm
1-25/64"
35.3mm
11/16"
17.5mm
59/64"
22.6mm
3-3/8"
85.7mm
1-3/8"
34.9mm STRIKE
CUTOUT
1"
25.4mm
LOCK & STILE
CYLINDER
CYLINDER
SHOWN WITH
FLAT FACEPLATE
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
MS1850SN MS® SERIES DEADLOCK (ANSI SIZE)
Dimensions Jamb & Stile Preparation
Lock & Cylinder Installation
FOR 4003-01 ANSI STRIKE
HOW TO ORDER MS1850SN DEADLOCK
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPL ATE ANSI SIZE HANDING FINISH
MS185 0SN -410 -628
0 Flat 415 LH or RHR 313 Dark Bronze Anodized
1 Radius 416 RH or LHR 335 Black Anodized
2 Bevel 410 Non-Handed* 628 Clear Anodized
*Any flat or radius faceplate, except Schoolhouse.
If ANSI strike required, specify 4003ANSI and finish: 626 or 605 (see ACCESSORIES).
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Special Order Options
4015 Threshold Bolt or 4016 Header Bolt for multi-point
locking.
4085 Header Bolt for hollow metal pairs of doors. 4085
Header Bolt not recommended for wood applications.
Deadlock strikes.
Lock mounting accessories and options.
MS1850SN Deadlocks are operable
by any standard 1-5/32" diameter
mortise cylinder with MS® cam.
Deadlock lever trim &
keyless entry trim.
Schoolhouse function
available as special order.
ARMORED FACEPLATE
1-1/4" X 8"
FLAT MS1850SN
RADIUS MS1851SN
LH BEVEL MS1852SN-415
RH BEVEL MS1852SN-416
DL-14 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS1850SN-050 MS®
Deadlock (ANSI Size)
Operation
360° turn of key or thumbturn throws or retracts the
counterbalanced bolt. Key can be removed only when
bolt is in a positively locked or unlocked position. Lock
accepts any standard 1-5/32" diameter mortise cylinder or
thumbturn from either or both sides. Cylinder must have
MS® dimensioned cam.
Specifications
CYLINDER BACKSET
• 1-1/2" only.
CASE
• Steel with corrosion-resistant plating, measures 1" x 6" x 2-1/4".
BOLT
• 5/8" x 1-3/8" with 13/16" throw. Eight-ply laminated stainless
steel. Center ply has alumina-ceramic core to defeat any
hacksaw attack, including rod-type “super” hacksaws, while
hook shape repels pry bar attempts to “spread” the door
from its jamb or lift it off its track.
FACEPLATE
• Measures 1-1/4" x 8".
STRIKE
• See back of page for dimensions of strike slot which can be
cut in metal jamb. Trim plate, box strike, and armored strike
are also available.
CYLINDER CAM
• MS1850SN-050 Deadlocks are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam dimensioned
as shown. Cylinders with MS® cams can be readily obtained
from most cylinder manufacturers. See CYLINDERS section
for cylinder make, thumbturn and trim ring information.
OPTIONS
• Cylinder backset and faceplate finish and shape (radiused,
flat or bevel cross-section to match door nose) must be
specified. “SCHOOLHOUSE” version, also available, is
modified so that operation from inside is “unlock only”. This
lock is handed and must be specified LH or RH. Specify
Series SCH1850SN-050. Same faceplate and backset
options as Series MS1850SN-050. Operation from inside,
with standard Adams Rite 4066 Turn.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately. Shipping
weight: 1-1/2 lbs.
MS1850SN-050 MS® DEADLOCK (ANSI SIZE)
HOLLOW
METAL
WOOD GRADE 1
E8281/E8291
The ANSI size MS1850SN-050 Deadlock utilizes a
laminated stainless steel hookbolt, activated by a pivot
mechanism to provide maximum security for wood or
hollow metal doors.
Function
For hollow metal or wood sliding doors prepared for hardware according
to the specifications of the American National Standards Institute (ANSI),
this MS deadlock provides maximum security and ease of installation. Its
standard 1-1/2" backset dimension provides adequate clearance for the
deep jamb “pocket” of many commercial and industrial entrances. Also
useful for swinging doors closing against jambs too shallow for the 1-3/8"
throw of the MS1850SN swinging door deadlock.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-15
MS1850SN-050 MS® DEADLOCK (ANSI SIZE)
Dimensions Stile & Wood Door Preparation
HOW TO ORDER MS1850SN-050 MS® DEADLOCK (ANSI SIZE)
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPL ATE ANSI SIZE HANDING FINISH
MS 185 0SN -450 -628
0 Flat 455 LH or RHR 313 Dark Bronze Anodized
1 Radius 456 RH or LHR 335 Black Anodized
2 Bevel 450 Non-Handed* 628 Clear Anodized
*Any flat or radius faceplate.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Special Order Options
4015 Threshold Bolt or 4016 Header Bolt for
multi-point locking.
4085 Header Bolt for hollow metal pairs of doors. 4085
Header Bolt not recommended for wood applications.
Deadlock strikes.
MS1850SN-050 Deadlocks are operable
by any standard 1-5/32" diameter mortise
cylinder with MS® cam.
Deadlock lever trim &
keyless entry trim.
Schoolhouse function
available as special order.
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
2-3/16"
55.6mm
1-15/16"
49.2mm
1/4"
6.4mm
11/16"
17.5mm
1-17/64"
32.1mm
1-17/64"
32.1mm
1-1/4"
31.8mm
1"
25.4mm
1/4"
6.4mm
2-3/8"
60.3mm
7/8"
22.2mm
1-1/2"
38.1mm
1-1/4"
31.8mm
2-9/32"
57.9mm
2-9/64"
54.4mm
8-1/64"
203.6mm
8-1/64"
203.6mm
59/64"
23.4mm
LOCK & STILE
BACKSET
1-1/2"
38.1mm BACKSET
DIA.
STILE
DIA.
TYP.
STRIKE
CUTOUT
CYLINDER
SHOWN WITH
FLAT FACEPLATE
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
6"
152.4mm
13/32"
10.3mm
5/8"
15.9mm
51/64"
20.2mm
1/4"
6.4mm
1-1/4"
31.8mm
19/32"
15.1mm
2-7/32"
56.4mm
53/64"
21mm
1-15/32"
37.3mm
1-15/32"
37.3mm
11/32"
8.7mm
31/32"
24.6mm
8"
203.2mm
7-15/16"
201.6mm
7-1/4"
184.2mm
Lock & Cylinder Installation
ARMORED FACEPLATE
1-1/4" X 8"
FLAT MS1850SN-450
RADIUS MS1851SN-450
LH BEVEL MS1852SN-455
RH BEVEL MS1852SN-456
DL-16 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS1861 Series
Bottom Rail Deadbolt
Operation
360° turn of key or thumbturn throws or retracts bolt(s). Key
can be removed only when bolts are in a positively locked
or unlocked position. Lock accepts any standard 1-5/32"
diameter mortise cylinder from either or both sides. Cylinder
must have MS® dimensioned cam.
Specifications
CYLINDER BACKSET
• Minimum backset is approximately 2-1/4" for the MS1861-
01 with vertical bolt only. The MS1861-02 with vertical and
horizontal bolts requires placement of cylinder centerline
5-3/4" from nose of door. Both have cylinder center 1-7/8"
above bottom edge of door.
CASE
• Steel with corrosion-resistant plate, measures 1" x 6" x 1-13/16".
BOLTS
• 3/8" diameter. Stainless steel vertical threshold bolt has
13/16" throw. Hardened steel horizontal bolt has 1-1/8" throw.
STRIKES
• In metal installation, 7/16" drilled holes in threshold are
required. For MS1861-02, drilled holes are also required in
jamb or opposite door. For wood, metal plate with 7/16" hole
must be provided for each bolt.
CYLINDER CAM
• MS1861 Bottom Rail Deadbolts are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam dimensioned
as shown. Cylinders with MS® cams can be readily obtained
from most cylinder manufacturers. See CYLINDERS section
for cylinder make, thumbturn and trim ring information.
STANDARD PACKAGE
• Individually boxed with mounting screws. Cylinders and/or
thumbturns available separately. Shipping weight:
MS1861-01: 1-3/4 lbs., MS1861-02: 2 lbs.
MS1861 SERIES BOTTOM RAIL DEADBOLT
FULL GLASSGRADE 1
E8211
The MS1861 Bottom Rail Deadbolt provides maximum
security with MS deadbolt over-center/pivot locking
mechanism. It utilizes hardened steel bolts for the limited
space of ultra-narrow stile doors.
Function
Using the same over-center/pivot locking mechanism as the basic MS®
deadbolt, the MS1861 lies horizontally in the bottom rail of ultra-narrow stile
doors which have insufficient vertical space for a lock, and tempered glass
doors which have no stile at all. The hardened steel cylindrical bolts allow
simple drilled strike holes of a relatively small size to minimize the nuisance
and danger presented by some threshold strikes in collecting debris or
snagging on high-heeled shoes. MS1861-02 locks either single-leaf or pairs
of doors. Not recommended for wood doors.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
MS1861-01
MS1861-02
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-17
UNIT ILLUSTRATED IS MS1861-02. (BOTH HORIZONTAL & VERTICAL BOLTS INCLUDED.)
PART NUMBER FOR VERTICAL BOLT OPERATION ONLY IS MS1861-01. CONVERSION KIT
NO. 4014 AVAILABLE TO CONVERT MS1861-01 TO MS1861-02. SEE BELOW:
3/4"
19.1mm 1"
25.4mm
63/64"
25mm
1"
25.4mm
1-1/4"
31.8mm
3/8"
9.5mm
2-1/2"
63.5mm
1-11/16"
42.9mm
1-55/64"
47.2mm
3-5/8"
92.1mm
5-25/64"
136.9mm
7-15/16"
201.6mm
3/8"
9.5mm
1
3
4
2
1-1/8"
21.6mm
4"
101.6mm
9/16"
14.3mm
BOTTOM RAIL
MTG. WEB
TUBE
SPACER
#10-32
DRILL & TAP
TYP.
DIA.
7/16"
11.1mm
1/4"
6.4mm
1/2"
12.7mm
9/16"
14.3mm
7-1/4"
184.2mm
6-1/8"
155.6mm
4"
101.6mm
2"
50.8mm
DIA.
5-49/64"
146.4mm
BACKSET
#8-32
DRILL & TAP
TYP.
CYLINDER
MIN.
CHANNEL
DEPTH
THROW
DIA.
BOTTOM
OF DOOR
RAIL
WITHOUT
WEB
TUBE SPACERS MAY BE REQUIRED
TO POSITION LOCK MECHANISM.
BOTTOM DOOR RAILS WITH WEB WILL
REQUIRE MACHINING AS SHOWN. POSITION
OF WEB WILL DETERMINE TUBE SPACER
REQUIREMENT AND TUBE SPACER LENGTH.
MS1861 SERIES BOTTOM RAIL DEADBOLT
Dimensions Rail Preparation
Lock & Cylinder Installation
HOW TO ORDER MS1861 SERIES BOTTOM RAIL DEADBOLT
Specify quantity and the following information. Order related products separately.
PRODUCT NO. BOLT OPERATION FINISH PACK AGING
MS1861 -01 -603 -IB
01 Vertical Bolt Only 603 Zinc plated steel IB Individually Boxed
02 Vertical and Horizontal Bolts
If tube spacers are required, specify QUANTITY and LENGTH.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders
4014 Conversion Kit for multi-point locking applications or it can be
ordered with vertical and horizontal bolts (Bolt Operation option 2).
MS1861 Bottom Rail Deadbolts are operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam.
FOR MS1861-02
4014 Conversion Kit
To convert MS1861-01 to MS1861-02, 4014 Conversion Kit provides
horizontal bolt assembly with guide and attachment fittings.
The 4014 Conversion Kit consists of:
1 Arm & Bolt Assembly
2 Assembly Pin
3 Bolt Guide Bracket
4 Mounting Screws
To assemble, press pin through disc and arm.
DL-18 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
1875 Two-Point
Deadlock
Operation
90° rotation of turn throws or retracts bolts. 360° turn of key
deadlocks mechanism, preventing operation of the turn in
either locked or unlocked position.
Specifications
CYLINDER BACKSET
• Bolt arms require inside stile clearance of 1-11/16" on one
side of cylinder center, 1" on the other.
CASE
• Steel with corrosion-resistant plate, measures 1" x 6" x 2-5/8".
BOLT ARMS
• 1-1/32" throw. Threaded for 1/4" – 20 rods. Because of
design variations in this type of door, no standard bolt can
be offered to fit all makes of doors. Contact the Adams Rite
factory concerning bolts, rods, bolt guides, and strikes to fit
individual door designs.
4060 TURN
• Zinc alloy escutcheon and handle. Finish is US26D. Steel
spindle is also available to accommodate various door
thicknesses.
CYLINDER CAM
• 1875 Two-Point Deadlocks are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam dimensioned
as shown. Cylinders with MS® cams can be readily obtained
from most cylinder manufacturers. See CYLINDERS section
for cylinder make, thumbturn and trim ring information.
OPTIONS
• 4060 Turn shown is available with choice of spindle lengths.
Bolts, connecting rods, bolt guides, and strikes are available
by special order. Cylinders also available separately.
STANDARD PACKAGE
• Shipping weight: 1-1/2 lbs.
1875 TWO-POINT DEADLOCK
ROLLUP DOOR GRADE 2
E86182
The 1875 Two-Point Deadlock provides security for roll-up
doors, security screens, or similar doors. Two bolts are
operational from either or both sides of the deadlock.
Function
For overhead “garage” doors, roll-up security screens, or similar doors.
Provides turn operation of two bolts from either or both sides. Accepts
standard mortise cylinders for key control of bolts to secure them in either
projected or retracted position.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
4060 TURN
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-19
7-15/16"
201.6mm
7-1/4"
184.2mm
6"
152.4mm
1-1/32"
26.2mm
3-1/2"
88.9mm
8-63/64"
228.2mm 1-63/64"
50.4mm
TRAVEL
1-1/32"
26.2mm
1"
25.4mm
1-21/32"
42.1mm
2-1/8"
54mm
3-15/32"
88.1mm
1-1/4"
31.8mm
11/32"
8.7mm
1-1/64"
25.8mm
TRAVEL
10-32 NF, 2 PLCS
(HOLE LOCATION FOR
4060 HANDLE ASSY)
NOTE: INSTALLATION REQUIREMENTS
VARY ACCORDING TO RAIL DESIGN
DIA.
3/16"
4.8mm
1/2"
12.7mm
7/8"*
22.2mm
51/64"
20.2mm
1-1/4"
31.8mm
2-7/8"
73mm
2-1/8"
54mm
1-23/32"
43.7mm
2-5/8"
66.8mm
1"
25.4mm
1-1/2"
38.1mm
3/8"
9.5mm
DIA.
DIA.
(2 PLCS)
11/16"
17.5mm
MIN.
1-11/16"
42.9mm MIN.
23/32"
18.3mm
*FOR 1-3/4" THICK DOOR
1/4-20 NC
(2 PLCS)
MAX.
1875 TWO-POINT DEADLOCK
Dimensions
Installation
HOW TO ORDER 1875 TWO-POINT DEADLOCK
Specify quantity and the following information. Order related products separately.
PRODUCT NO. PACK AGING
1875 -IB
IB Individually Boxed
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Special Order Options
4060 turn.
Cylinder guards.
1875 Two-Point Deadlocks are operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam.
Bolts, connecting rods, bolt guides
and strikes are by special order only.
4060 Turn
DL-20 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS+1890 Series MS®
Deadlock/Deadlatch
Specifications
CYLINDER BACKSET
• 31/32", 1-1/8", or 1-1/2".
CASE
• Steel with corrosion-resistant plating, measures 1" x 7-3/8" x
depth. Depth varies by backset (see table on back of page).
LATCHBOLT
• Zinc alloy with Delrin face for smooth, quiet action, measures
5/8" x 5/8" with 7/16" throw. Handing easily reversible. Bolt
can be held fully retracted to allow door to be free swinging
(see illustration on back of page).
LOCKBOLT
• 5/8" x 1-3/8" with 13/16" throw. Eight-ply laminated stainless
steel. Center ply has alumina-ceramic core to defeat any
hacksaw attack, including rod-type “super” hacksaws, while
hook shape repels pry bar attempts to “spread” the door from
its jamb or lift it off its track.
ARMORED STRIKE
• Satin stainless steel trimplate with steel mounting plate
and dust box. Flat strike furnished. Also available for pairs
of doors in radius shape, or flat with square corners for
ANSI hollow metal jambs. Flat strikes also available with
longer lip. MS+1890 Deadlock/Latch cannot be used with
electric strikes.
CYLINDER CAM
• MS+1890 Series locks are operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam dimensioned as
shown. Cylinders with MS® cams can be readily obtained
from most cylinder manufacturers. See CYLINDERS section
for cylinder make, thumbturn and trim ring information.
OPTIONS
• Order handle/paddle for one side only or both sides.
Handles/paddles on both sides solve, with minimum traffic
impediment, the problem of doors that stand ajar due to wind
or air-conditioning pressures.
STANDARD PACKAGE
• Individually boxed with strike and machine screws
for mounting. Cylinders available separately.
Shipping weight: 2 lbs.
MS+1890 SERIES MS® DEADLOCK/DEADLATCH
ALUMINUM GRADE 1
E82101
The MS+1890 Deadlock/Latch provides a maximum security
deadlock for after hour and traffic control convenience
during business hours.
Function
Maximum Security deadlock after hours, plus traffic control convenience for
management during the business day. Typical installation is a bank or store
requiring three modes of door control: 1. Both lock and latch bolts retracted
for unrestricted entry and exit during business hours, 2. Handle-operated
latch for exit-only traffic just after closing and 3. Maximum Security hookbolt
for overnight lockup. NOTE: Handle or paddle operates latchbolt only.
Operation
360° turn of key or thumbturn throws or retracts the hook-shaped deadlock.
120° further turn retracts latch bolt as well. Cylinder may be any make standard
1-5/32" diameter mortise type with MS® dimensioned cam (see CYLINDERS).
Handle retracts spring-loaded latchbolt only.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
4505 ARMORED
STRIKE
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-21
MS+1890 SERIES MS® DEADLOCK/DEADLATCH
Dimensions
HOW TO ORDER MS+1890 SERIES MS® DEADLOCK/DEADLATCH
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPL ATE BACKSET STRIKE SHAPE/LIP LENGTH HANDING FINISH
MS+189 1-3 02 6-628
0 Flat 2 31/32" 01 Flat/Standard Jamb 5 LH or RHR 313 Dark Bronze Anodized
1 Radius 3 1-1/8" 02 Radius/Standard Stile 6 RH or LHR 335 Black Anodized
1W Radius with weatherstrip 4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized
2 Bevel 21 Flat/Center Hung 4-1/2" Jamb
XX Other Lip Lengths
For door thickness other than 1-3/4", contact factory.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim
Trim strikes, including 4505
armored strike.
MS+1890 Deadlock/Latch is operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam.
4568, 4569 Lever trim and 4591 paddles. Electrified
trim/operators are not available for the MS+1890.
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
“A”
63/64"
25mm
1/8"
3.2mm
5/32"
4mm
11/16"
17.5mm
1/4"
6.4mm
5-3/8"
136.5mm
4-57/64"
124.2mm
3-3/8"
85.7mm
4-7/8"
123.8mm 6-57/64"
175mm
5-9/16"
141.3mm
1/16"
1.6mm
1-19/32"
40.5mm
1-1/4"
31.8mm
7/16"
11.1mm
1-1/2"
38.1mm 3"
76.2mm
17/64"
6.7mm
1-1/64"
25.8mm
1/16"
1.6mm
3/4"
19.1mm
1-17/64"
32.1mm
5/8"
15.9mm
39/64"
15.5mm
53/64"
21mm
3/16"
4.8mm 1/4"
6.4mm
9/16"
14.3mm
31/64"
12.3mm
51/64"
20.2mm 17/32"
13.5mm 7/32"
5.6mm
6-3/8"
162mm
6-27/32"
173.8mm
7-25/64"
187.7mm
.260 SQ. BROACH
(ON DIAMOND)
(COVERS ANY PREVIOUS CUTOUT FOR MS® DEADBOLT)
CYLINDER
MAXIMUM GAP
DOOR TO JAMB
UP TO
HOLD
BACK
THROW
LOCKBOLT
PUSH BACK
LATCHBOLT
OPERATE BOLT HOLDBACK
LEVER WITH KEY, NAIL FILE
OR SIMILAR TOOL
DOWN
TO
RELEASE
1
2
3
(4 PLCS)
R
5/32"
4mm
(4 PLCS)
DIA.
DIA.
2 PLACES:
PADDLE:
LEVER: TAP 10-32
R
DIA.
BACKSET
Latch Holdback
Intructions
Jamb Preparation
Latch/Lock, Cylinder
& Paddle Installation
Stile Preparation
BACKSET "A"
31/32"
24.6mm
1-5/8"
41.3mm
1-1/8"
28.6mm
1-25/32"
45.2mm
1-1/2"
38.1mm
2-1/4"
57. 2mm
Cutout same as MS1850 Deadbolt
plus holes for handle mount.
ARMORED FACEPLATE
1" X 6-7/8"
FLAT MS+1890
RADIUS MS+1891
RADIUS W/ WEATHERSTRIP
MS+1891W
LH BEVEL MS+1892 (LH)
RH BEVEL MS+1892 (RH)
DL-22 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS1950
Series Deadlock
Specifications
CYLINDER BACKSET
• 31/32", 1-1/8", or 1-1/2" only.
CASE
• Fully stainless steel case and internal components,
measures 1" x 6" x depth. Depth varies by backset (see
table on back of page).
BOLT
• 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight-ply laminated
stainless steel. Center ply has alumina-ceramic core to defeat
any hacksaw attack, including rod-type “super” hacksaws.
FACEPLATE
• Measures 1" x 6-7/8".
STRIKE
• See back page for dimensions of strike slot which can be
cut in metal jamb. Trim plate, box strike, and armored strike
are available separately.
CYLINDER CAM
• MS1950 Deadlocks are operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam dimensioned as
shown. Cylinders with MS® cams can be readily obtained
from most cylinder manufacturers. See CYLINDERS section
for cylinder make, thumbturn and trim ring information.
OPTIONS
• For jambs too narrow to accept the long bolt, the MS1950-
050 offers a shorter bolt with hook shape to provide equal
security against door-prying attempts. Second and third
point locking bolts are available for pairs of doors. All use
any make mortise cylinder and thus can be keyed into
systems with other types of doors. “SCHOOLHOUSE”
version, also available, is modified so that operation
from inside is “unlock only”. This lock is handed and
must be specified LH or RH. Specify Series SCH1950.
Same faceplate and backset options as Series MS1950.
Operation from inside, with standard Adams Rite 4066
Thumbturn or with 4550 Deadlock Lever.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately.
Shipping weight: 1-1/2 lbs.
MS1950 SERIES DEADLOCK
ALUMINUM GRADE
E
The stainless steel MS1950 Deadlock utilizes a laminated
stainless steel bolt, activated by a pivot mechanism to
provide maximum security for a single leaf narrow stile door.
Function
A huge bolt of laminated stainless steel, nearly three inches long, activated
by an uncomplicated pivot mechanism, has made this basic MS® Deadlock
the standard of the narrow stile door industry. The length of this bolt
provides maximum security for a single leaf door, even a very tall and
flexible one or an installation where the gap between the door and jamb is
greater than it should be.
Operation
360° turn of key or thumbturn throws or retracts the counterbalanced bolt. Key
can be removed only when bolt is in a positively locked or unlocked position.
Lock accepts any standard 1-5/32" diameter mortise cylinder or thumbturn
from either or both sides. Cylinder must have MS® dimensioned cam.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-23
STILE
BACKSET
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
“A”
1"
25.4mm
5/8"
15.9mm
7/8"
22.2mm
11/32"
8.7mm
6-13/16"
173mm
6-7/8"
174.6mm
6-3/8"
162mm
1-13/32"
35.7mm
1/4"
6.4mm
1/4"
6.4mm
6"
152.4mm
SHOWN WITH
FLAT FACEPLATE
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
1-1/4"
31.8mm DIA. HOLE
6-57/64"
175mm
1-19/32"
40.5mm
5/32"
4mm
(4 PLCS.)
R
1-1/64"
25.8mm
1"
25.4mm
11/16"
17.5mm
LOCK & STILE CYLINDER
STRIKE
CUTOUT
59/64"
23.4mm
3-3/8"
85.7mm
1-3/8"
34.9mm
MS1950 SERIES DEADLOCK
Dimensions Stile Preparation
Lock & Cylinder Installation
HOW TO ORDER MS1950 SERIES DEADLOCK
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPL ATE BACKSET HANDING FINISH
MS195 0-2 10 -628
0 Flat 2 31/32" 15 LH or RHR 313 Dark Bronze Anodized
1 Radius 3 1-1/8" 16 RH or LHR 335 Black Anodized
1W Radius with weatherstrip 4 1-1/2" 10 Non-Handed* 628 Clear Anodized
2 Bevel
*Any flat or radius faceplate.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Special Order Options
4015 Threshold Bolt or 4016 Header Bolt
for multi-point locking.
4085 Header Bolt for pairs of doors.
4000, 4001, MS4002 Deadlock Strikes.
Lock mounting accessories and options.
MS1950 Deadlocks are operable
by any standard 1-5/32" diameter
mortise cylinder with MS® cam.
Deadlock lever trim and
keyless entry trim.
Exit indicators.
Schoolhouse function
available as special order.
BACKSET "A"
31/32"
24.6mm
1-5/8"
41.3mm
1-1/8"
28.6mm
1-25/32"
45.2mm
1-1/2"
38.1mm
2-1/4"
57. 2mm
ARMORED FACEPLATE
1" X 6-7/8"
FLAT MS1950
RADIUS MS1951
RADIUS W/ WEATHERSTRIP
MS1951W
LH BEVEL MS1952-X15
RH BEVEL MS1952-X16
DL-24 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS1950-050
Series Deadlock
Specifications
CYLINDER BACKSET
• 31/32", 1-1/8", or 1-1/2" only.
CASE
• Fully stainless steel case and internal components,
measures 1" x 6" x depth. Depth varies by backset (see
table on back of page).
BOLT
• 5/8" x 1-3/8" with 13/16" throw. Eight-ply laminated stainless
steel. Center ply has alumina-ceramic core to defeat any
hacksaw attack, including rod-type “super” hacksaws, while
hook shape repels pry bar attempts to “spread” the door
from its jamb or lift it off its track.
FACEPLATE
• Measures 1" x 6-7/8".
STRIKE
• See back page for dimensions of strike slot which can be
cut in metal jamb. Trim plate, box strike, and armored strike
are available separately.
CYLINDER CAM
• MS1950-050 Deadlocks are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam dimensioned
as shown. Cylinders with MS® cams can be readily obtained
from most cylinder manufacturers. See CYLINDERS section
for cylinder make, thumbturn and trim ring information.
OPTIONS
• Cylinder backset and faceplate finish and shape (radiused,
flat or bevel cross-section to match door nose) must be
specified. “SCHOOLHOUSE” version, also available, is
modified so that operation from inside is “unlock only”. This
lock is handed and must be specified LH or RH. Specify
Series SCH1950-050. Same faceplate and backset
options as Series MS1950-050. Operation from inside, with
standard Adams Rite 4066 Turn or with 4550 Deadlock
Lever. For wood or hollow metal, see MS1850SN.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately.
Shipping weight: 1-1/2 lbs.
MS1950-050 SERIES DEADLOCK
ALUMINUM GRADE 1
E8281/E8291
The stainless steel MS1950-050 Deadlock utilizes a
laminated stainless steel hookbolt, activated by a pivot
mechanism to provide maximum security for a single leaf
narrow stile door.
Function
The MS1950-050 Deadlock answers the security need of sliding doors in
commercial, industrial, and institutional buildings. The mechanism is identical to
the widely used Maximum Security swinging door lock, except that the massive
laminated bolt is provided in a hook shape to resist the parting motion of sliding
door and jamb. The over-center MS locking action assures that forced entry
attempts to pry the door in any direction, up, down, or sideways, will be defeated.
Operation
360° turn of key or thumbturn throws or retracts the counterbalanced bolt. Key
can be removed only when bolt is in a positively locked or unlocked position. Lock
accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either
or both sides. Cylinder must have MS® dimensioned cam.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-25
MS1950-050 SERIES DEADLOCK
Dimensions
HOW TO ORDER MS1950-050 SERIES DEADLOCK
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPL ATE BACKSET HANDING FINISH
MS195 0-2 10 -628
0 Flat 2 31/32" 15 LH or RHR 313 Dark Bronze Anodized
1 Radius 3 1-1/8" 16 RH or LHR 335 Black Anodized
1W Radius with weatherstrip 4 1-1/2" 10 Non-Handed* 628 Clear Anodized
2 Bevel
*Any flat or radius faceplate.
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
“A”
1"
25.4mm
5/8"
15.9mm
7/8"
22.2mm
SHOWN WITH
FLAT FACEPLATE
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
6-13/16"
173mm
6-7/8"
174.6mm
1/4"
6.4mm
7/32"
5.6mm
6-3/8"
161.9mm
6"
152mm
5/8"
15.9mm
13/32"
10.3mm
13/16"
20.6mm
STILE
BACKSET
1-1/4"
31.8mm DIA. HOLE
6-57/64"
175mm
1-19/32"
40.5mm
5/32"
4mm
(4 PLCS.)
R
1-1/64"
25.8mm
11/16"
17.5mm
LOCK & STILE CYLINDER
STRIKE
CUTOUT
59/64"
23.4mm
2-3/16"
55.6mm
1-15/16"
49.2mm
1/4"
6.4mm
Stile Preparation
Lock & Cylinder
Installation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Special Order Options
4015 Threshold Bolt or 4016 Header Bolt
for multi-point locking.
4085 Header Bolt for pairs of doors.
4000, 4001, MS4002 Deadlock Strikes.
Lock mounting accessories and options.
MS1950-050 Deadlocks are operable
by any standard 1-5/32" diameter
mortise cylinder with MS® cam.
Deadlock lever trim and
keyless entry trim.
Exit indicators.
Schoolhouse function
available as special order.
BACKSET "A"
31/32"
24.6mm
1-5/8"
41.3mm
1-1/8"
28.6mm
1-25/32"
45.2mm
1-1/2"
38.1mm
2-1/4"
57. 2mm
ARMORED FACEPLATE
1" X 6-7/8"
FLAT MS1950-X50
RADIUS MS1951-X50
RADIUS W/ WEATHERSTRIP
MS1951W-X50
LH BEVEL MS1952-X55
RH BEVEL MS1952-X56
DL-26 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Dual Force® 2190
Interconnected
Deadbolt/Deadlatch
Operation
Key or thumbturn retracts or extends deadbolt or deadlatch.
Inside lever retracts both when configured with interconnect
feature. Outside lever retracts latch only. Latch holdback feature
activated or deactivated by turning key to retract latch and sliding
holdback button on faceplate down to hold and up to release.
Specifications
INTER-CONNECTION
• Field-selectable inter-connection feature allows interior trim
to retract deadbolt and deadlatch. Consult local building
officials for guidance in code compliance. Retrofits to existing
MS1850S Deadbolt or 4500 and 4900 Deadlatch of the same
backset. 1-3/4" minimum door thickness required.
CYLINDER BASKET
• 1-1/8" or 1-1/2" only.
LATCHBOLT/DEADBOLT
• Latchbolt: 5/8" throw of solid brass. Easily reversible using
only a screwdriver. Deadbolt: 1" throw of stainless steel.
AUXILIARY DEADLATCH PIN
• Stainless steel. Deadlocks latchbolt to prevent “loiding” or
case-knife entry.
FACEPLATES
• Measures 1" x 6-7/8". Include FaceStyle faceplate system
that adapts to flat, radius, or beveled door edge. Radius with
weatherseal faceplate available separately.
ALUMINUM ELECTRIFIED
OPTION
GRADE 1
E82102
The Dual Force 2190 Interconnected Deadbolt/Deadlatch
provides access control and security for aluminum stile
doors. Latch and deadbolt capabilities are combined for
fast, easy, and panic-proof exiting.
Function
The Dual Force 2190 combines the access control capabilities of a latch with
the security of a deadbolt. The key retracts and extends the deadbolt (and
deadlatch) from either side. The exterior lever retracts the latch only, while
the inside lever retracts the deadbolt and latch simultaneously for fast, easy,
panic-proof exiting. Intended for out-swinging doors.
STRIKES
• Standard strike furnished is the 2101-01 for flat jamb where
door closes flush or nearly flush. The 2101 covers MS®
Deadlock strike preparation with modification, and the 4901
Deadlatch strike directly. Also available in radius version for
opposite stile pairs of doors and with extended lip strikes for
special jamb conditions.
CYLINDER CAM
• The Dual Force 2190 is operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam dimensioned as
shown. Cylinders with MS® cams can be readily obtained from
most cylinder manufacturers. See CYLINDERS section for
cylinder make, thumbturn and trim ring information.
OPTIONS
• Specify trim option, lever style, finish, and strike. Also adapts
to paddle operator 4591. See 2290 for wood or steel door
version for stile and rail type door construction. Note that the
low profile trim (trim option 3) is recommended for in-swing
door applications. Please refer to 3080 (TRIM) for full offering
of designer handle sets.
ELECTRIFIED TRIM OPTIONS
• Order 2190 Electrification Kit EK-2190 for adding to the
clutched exterior lever. Dual voltage 12/24 VDC rated for
continuous duty operation. Energizing the lever allows exterior
lever to be turned to retract latch only. The electrified option is
not available for low profile trim (trim option 3).
STANDARD PACKAGE
• Individually boxed with trim as specified, strike and machine
screws for mounting. Cylinders available separately. Shipping
weight: 2 lbs.
HOW TO ORDER DUAL FORCE® 2190 INTERCONNECTED DEADBOLT/DEADLATCH
Specify quantity and the following information. Order related products separately.
PRODUCT NO. BACKSET STRIKE FACEPL ATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH
2190 -3 1 1 -1 01 32D
3 1-1/8" 0 None 1 Clear Anodized 628 0 None 00 No Handle 03 Bright Brass (US3)
4 1-1/2" 1 Standard Flat 2 Dark Bronze
Anodized 313 1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)
2 Radius Strike 3 Black Anodized 335 2 With Electrified
Trim Set 01 Curve 10B Dark Bronze (US10B)
3 Flat/Center
Hung 4" 3 Low Profile Trim 02 Round 32 Bright Stainless (US32)
4 Flat/Center
Hung 4-1/2" 03 Square 32D Satin Stainless (US32D)
DESIGNER SERIES:
MD MJ
ME MN (Handed)
MG MV (Handed)
MI MW
Trim options 1 and 2 are for outswing doors only.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Electrification Accessories Cylinders
2190 Interconnected Deadbolt/Deadlatch can be electrified
in the field using the 2190 Electrification Kit (EK-2190) or it
can be ordered with electrified trim (trim option 2).
Extended lip strikes.
2190 thick door kits.
2190 Interconnected Deadbolt/Deadlatch
is operable by any standard 1-5/32”
diameter mortise cylinder with MS® cam.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
STANDARD SERIES:
CLUTCHED EXTERIOR
TRIM SET INTERIOR PASSAGE
LEVER SET
01-CURVE
MD MI
MV
02-ROUND
ME MJ
MW
03-SQUARE
MG MN
DESIGNER SERIES:
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-27
DUAL FORCE® 2190 INTERCONNECTED
DEADBOLT/DEADLATCH
DUAL FORCE® 2190 INTERCONNECTED
DEADBOLT/DEADLATCH
BACKSET
DIA.
INT.
EXT. EXT.
INT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
2190 WITH 01 LEVER*
OUTSIDE INSIDE
LOW PROFILE TRIM
2190 WITH 02 LEVER* 2190 WITH 03 LEVER*
2190 WITH MD LEVER 2190 WITH ME LEVER 2190 WITH MG LEVER 2190 WITH MI LEVER
2190 WITH MJ LEVER 2190 WITH MN LEVER** 2190 WITH MV LEVER** 2190 WITH MW LEVER
CUTOUT SAME AS
MS1850S DEADBOLT
PLUS HOLES FOR
HANDLE MOUNTING
8-59/64"
226.6mm 8-59/64"
226.6mm 6-21/32"
169.1mm
1-55/64"
47.2mm
3-3/16"
81mm 2-45/64"
68.7mm
2-51/64"
71mm
4-11/32"
110.3mm
3-19/64"
83.7mm
3-1/4"
82.6mm
C
LCYLINDER
2101 STRIKE (covers and previous cutout for MS® Deadbolt) -
Retrofits 4901 and 4501 strike preparations.
15/64"
6mm
5-3/8"
136.5mm
4-41/64"
117.9mm
37/64"
14.7mm
1-9/64"
29mm
3-3/8"
85.7mm
3-5/32"
80.2mm
2-25/32"
70.6mm
2-15/16"
74.6mm
3-7/32"
81.8mm
3-1/8"
79.4mm
3-9/32"
83.3mm
3-1/4"
82.6mm
5-1/8"
130.2mm
3-11/32"
84.9mm
5"
127mm 4-35/64"
115.5mm
3-17/32"
89.7mm
3-11/16"
93.7mm
4-11/16"
119.1mm
4-29/32"
124.6mm
4-3/8"
111.1mm
4-3/16"
106.4mm
4-5/16"
109.5mm
3"
76.2mm
3"
76.2mm
2-11/16"
68.3mm
2-11/16"
68.3mm
1-23/64"
34.5mm
1-23/64"
34.5mm
2-15/32"
62.7mm
1-9/64"
29mm
63/64"
25mm
63/64"
25mm
3-13/32"
86.5mm
5"
127mm
3-5/16"
84.1mm
3-3/16"
81mm
3-11/32"
84.9mm
4-1/2"
114.3mm
* THE 2190-01, -02, AND -03 LEVER HANDLES ARE DESIGNED TO RETURN WITHIN 1/2" OF THE DOOR FACE.
HANDLES IN THE DESIGNER SERIES DO NOT HAVE THIS SAME FEATURE. PLEASE VERIFY WITH LOCAL CODE REQUIREMENTS TO ENSURE COMPLIANCE.
** HANDED
1"
25.4mm
1"
25.4mm
9/64"
3.6mm
2-1/8"
54mm
1-23/64"
34.5mm
1-1/2"
38.1mm
2-55/64"
72.6mm
6-7/8"
174.6mm
3/4"
19.1mm
11/16"
17.5mm
5/8"
15.9mm
6-13/16"
173mm
5-51/64"
147.2mm
1-1/4"
31.8mm
1-19/32"
40.5mm
4-13/64"
106.8mm
6-57/64"
175mm
1-1/64"
25.8mm
63/64"
25mm
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
MAXIMUM GAP
DOOR TO JAMB:
1/8"
3.2mm
Dimensions Stile Preparation
Jamb Preparation
Latch/Lock, Cylinder &
Level Installation
BACKSET “A”
1-1/8"
28.6mm
1-25/32"
45.2mm
1-1/2"
38.1mm
2-1/4"
57. 2mm
FOR CLUTCHED EXTERIOR
TRIM SET
ARMORED FACEPLATE
1" X 6-7/8"
FLAT 24-0066-01 (included)
RADIUS 24-0066-02 (included)
RADIUS W/ WEATHERSTRIP
24-0066-03
Dimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
DL-28 DEADLOCKS
DUAL FORCE® 2190 INTERCONNECTED
DEADBOLT/DEADLATCH
Dual Force® 2290
Interconnected
Deadbolt/Deadlatch
Operation
Key or thumbturn retracts or extends deadbolt or deadlatch.
Inside lever retracts both when configured with interconnect
feature. Outside lever retracts latch only. Latch holdback
feature activated or deactivated by turning key to retract latch
and sliding holdback button on faceplate down to hold and up
to release.
Specifications
INTER-CONNECTION
• Field selectable inter-connection feature allows interior trim
to retract deadbolt and deadlatch. Consult the local building
official for guidance in code compliance. 1-3/4" minimum door
thickness required.
CYLINDER BASKET
• 1-1/8" or 1-1/2" only.
LATCHBOLT/DEADBOLT
• Latchbolt: 5/8" throw of solid brass. Easily reversible using
only a screwdriver. Deadbolt: 1" throw of stainless steel.
AUXILIARY DEADLATCH PIN
• Stainless steel. Deadlocks latchbolt to prevent “loiding”
or case-knife entry.
FACEPLATES
• Measures 1-1/4" x 8". Includes FaceStyle faceplate system
that adapts to flat or beveled door edge.
STRIKES
• Standard strike furnished is the 2206 (ASA) strike for flat
jamb where door closes flush or nearly flush.
HOLLOW
METALWOOD
STILE OR RAIL
ELECTRIFIED
OPTION
GRADE 1
E82102
The Dual Force 2290 Interconnected Deadbolt/Deadlatch
provides access control and security for wood or hollow
metal doors. Latch and deadbolt capabilities are combined
for fast, easy, and panic-proof exiting.
Function
The Dual Force 2290 combines the access control capabilities of a latch with
the security of a deadbolt. The key retracts and extends the deadbolt (and
deadlatch) from either side. The exterior lever retracts the latch only while the
inside lever retracts the deadbolt and latch simultaneously for fast, easy, panic-
proof exiting. Intended for out-swinging doors.
CYLINDER CAM
• The Dual Force 2290 is operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam dimensioned as
shown. Cylinders with MS® cams can be readily obtained from
most cylinder manufacturers. See CYLINDERS section for
cylinder make, thumbturn and trim ring information.
OPTIONS
• Specify trim option, lever style, finish, and strike. Also adapts
to paddle operator 4591. See 2190 for aluminum door version
for narrow stile door construction. Thick Door Kit 2190-TDK-
XX available separately. Specify door thickness. Request to
Exit RXK-4600 switch available for small format levers. Note
that the low profile trim (trim option 3) is recommended for in-
swing door applications.
ELECTRIFIED TRIM OPTIONS
• Order 2190 Electrification Kit EK-2190 for adding to the
clutched exterior lever. Dual voltage 12/24 VDC rated for
continuous duty operation. Energizing the lever allows exterior
lever to be turned to retract latch only. The electrified option is
not available for low profile trim (trim option 3).
STANDARD PACKAGE
• Individually boxed with trim as specified, strike and machine
screws for mounting. Cylinders available separately.
Shipping weight: 2 lbs.
HOW TO ORDER DUAL FORCE® 2290 INTERCONNECTED DEADBOLT/DEADLATCH
Specify quantity and the following information. Order related products separately.
PRODUCT
NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE
DESIGNATION
TRIM AND HANDLE
FINISH
2290 -3 1 1 1 01 -32D
3 1-1/8" 0 None 0 US to match trim finish 0 None 00 No Handle 03 Bright Brass (US3)
4 1-1/2" 1 Standard Flat 1 Clear Anodized 628 1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)
2 Dark Bronze Anodized 313 2 With Electrified Trim Set 01 Curve 10B Dark Bronze (US10B)
3 Black Anodized 335 3 Low Profile Trim 02 Round 32 Bright Stainless (US32)
03 Square 32D Satin Stainless (US32D)
DESIGNER SERIES:
MD MJ
ME MN (Handed)
MG MV (Handed)
MI MW
Trim options 1 and 2 are for outswing doors only.
“Dim A”
R
.120"
3.0mm .182"
4.6mm
.800" ± .005"
20.3mm ± .127mm
STANDARD SERIES:
01-CURVE
MD MI
MV
02-ROUND
ME MJ
MW
03-SQUARE
MG MN
DESIGNER SERIES:
INCHES
Nominal, subject to tolerance ext remes.
Jamb
Preparation
2206 Strike
Stile Preparation
For Clutched Exterior
Trim Set
Latch/Lock,
Cylinder
& Lever
Installation
CUTOUT
TOLERANCE:
+ 0.015 +0.38
- 0.000 - 0.0
MAXIMUM GAP
DOOR TO JAMB:
1/8"
Cylinder Cam
2290 Series locks are operable by any
standard 1-5/32" diameter mortise cylinder
with special MS® cam dimensioned as shown.
Cylinders with MS® cams can be readily
obtained from most cylinder manufacturers.
See page SW-3 7 for cylinder make and trim
information.
BEVELED OR FL AT EDGE
CAM TOLERANCE:
CYLINDER
C
L
25/32
3/161/8R
1-1/4
4-3/16
2-1/8
1-1/4
BACKSET
8
ARMO RED
FACE PL ATE
1-1/4 X 8"
FLAT
(INCLUDED) FP K-0066-0X-XXX
HOW BACKSET
IS MEAS UR ED
CYLINDER
FLAT
BEVEL
C
L
C
L
C
L
4 7/8
3 3/8
4 1/8
1 1/4
1/8
1/8
5/8
C
LOF
LOCK
OF LOCK AND STRIKE
C
L
C
LOF
STRIKE PLATE
5-25/32
"A"
"B"
8
3/4
1-11/32
11/16
2-5/32
2-27/32
7-11/16
1
5/8
3-3/16
1-23/32
1/2
1
BACK SET"A" "B"
1- 1/8" 1- 1/8
1-3/4
1- 1/2"
1- 1/22-1 /8
CLUTCHED EXTERIOR
TRIM SET
SMALL FORMAT
LEVER SET
RELATED PRODUCTS
Electrification Accessories Cylinders
2290 Interconnected Deadbolt/Deadlatch
can be electrified in the field using the 2190
Electrification Kit (EK-2190) or it can be
ordered with electrified trim (trim option 2).
Extended lip strikes.
2290 thick door kits.
2290 Interconnected Deadbolt/Deadlatch is
operable by any standard 1-5/32" diameter
mortise cylinder with MS® cam.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
DEADLOCKS DL-29
DUAL FORCE® 2290 INTERCONNECTED
DEADBOLT/DEADLATCH
DUAL FORCE® 2290 INTERCONNECTED
DEADBOLT/DEADLATCH
ARM-014-9/14
C
L
OF LOCK
BACKSET
C
L
C
L
OF STRIKE
PLATE
LOCK &
OF STRIKE
PLATE
1-55/64"
47.2mm
2-11/16"
68.3mm
3-11/32"
84.9mm
2-25/32"
70.6mm
3-17/32"
89.7mm 3-3/16"
81mm
3-11/16"
93.7mm
BEVELED OR FLAT EDGE
INT.
EXT. EXT.
INT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
2290 WITH 01 LEVER*
OUTSIDE INSIDE
LOW PROFILE TRIM
2290 WITH 02 LEVER* 2290 WITH 03 LEVER*
2290 WITH MD LEVER 2290 WITH ME LEVER 2190 WITH MG LEVER 2290 WITH MI LEVER
2290 WITH MJ LEVER 2290 WITH MN LEVER** 2290 WITH MV LEVER** 2290 WITH MW LEVER
8-59/64"
226.6mm 8-59/64"
226.6mm
6-21/32"
169mm
3-3/16"
81mm 2-45/64"
68.7mm
2-51/64"
71.1mm
4-3/8"
111.1mm
3-5/16"
84.1mm
3-1/8"
79.4mm
3-7/32"
81.8mm
3-3/8"
85.7mm
3-5/32"
80.2mm
3-1/4"
82.6mm
4-7/8"
123.8mm
4-1/8"
104.8mm
3-3/8"
85.7mm
5/8"
15.9mm
3-9/32"
83.3mm
3-1/4"
82.6mm
5-1/8"
130.2mm
5"
127mm 4-1/2"
114.3mm
4-11/16"
119mm
4-29/32"
124.6mm
4-3/16"
106.4mm
4-3/8"
111.1mm
2-15/16"
74.6mm
4-5/16"
109.5mm
2-7/8"
73mm
3"
76.2mm
2-11/16"
68.3mm
1-23/64"
34.5mm
1-23/64"
34.5mm
2-15/32"
62.7mm
1-9/64"
29mm
63/64"
25mm
63/64"
25mm
3-13/32"
86.5mm
5"
127mm
3-5/16"
84.1mm 3-11/32"
84.9mm
4-1/2"
114.3mm
INT.
EXT.
INT.
EXT.
* THE 2290-01, -02, AND -03 LEVER HANDLES ARE DESIGNED TO RETURN WITHIN 1/2" OF THE DOOR FACE.
HANDLES IN THE DESIGNER SERIES DO NOT HAVE THIS SAME FEATURE. PLEASE VERIFY WITH LOCAL CODE REQUIREMENTS TO ENSURE COMPLIANCE.
** HANDED
1"
25.4mm
63/64"
25mm
8"
203.2mm 8"
203.2mm
7-11/16"
195.3mm
5-51/64"
147.2mm
5/8"
15.9mm
11/16"
17.5mm
45/64"
17.9mm
1-1/4"
31.8mm
1-1/4"
31.8mm
1/8"
3.2mm
1/8"
3.2mm
1-1/4"
31.8mm
2-5/32"
54.8mm
4-13/64"
106.8mm
1-23/64"
34.5mm 2-55/64"
72.6mm
2-5/32"
54.8mm
1/2"
12.7mm
“B”
“A”
CYLINDER
FLAT
C
L
C
L
BEVEL
C
L
HOW BACKSET
IS MEASURED:
MAXIMUM GAP
DOOR TO JAMB:
1/8"
3.8mm
Dimensions DimensionsStile Preparation
Jamb Preparation
Latch/Lock, Cylinder &
Lever Installation
BACKSET “A” “B”
1-1/8"
28.6mm
1-1/8"
28.6mm
1-3/4"
45.2mm
1-1/2"
38.1mm
1-1/2"
38.1mm
2-1/8"
54mm
FOR CLUTCHED EXTERIOR
TRIM SET
ARMORED FACEPLATE
1-1/4" X 8"
FLAT (included) FPK-0066-OX-XXX
2206 STRIKE
DL-30 DEADLOCKS
DUAL FORCE® 2290 INTERCONNECTED
DEADBOLT/DEADLATCH
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
2331 Heavy Duty
Deadbolt
Specifications
BACKSET
• 1-3/4" only.
CASE
• Zinc alloy, measures 7/8" x 3-5/8" x 2-5/8" deep.
BOLT
• Brass with stainless steel dogs, 1/2" x 1-1/2" with 3/4"
horizontal throw and 11/32" expansion above and below
main bolt.
ARMOR FACEPLATE
• Flat faceplate of brass 1" x 5-3/4". Available in a
variety of finishes.
STRIKE
• 1/8" x 1" x 4-11/16" with 5/8" x 1-5/8" opening. Brass, with
four-screw mounting. Trim finish same as faceplate.
SPECIAL CYLINDER CAM
• 2331 Heavy Duty Deadbolts are operable by any standard
1-5/32" diameter mortise cylinder with special cam dimensions
as shown. Cylinders with such cams can be readily obtained
from most cylinder manufacturers.
OPTIONS
• Specify trim finish: US3 Polished Brass (605), US26 Bright
Chrome (625), or US26D Satin Chrome (626).
STANDARD PACKAGE
• Individually boxed with strike and wood screws for mounting
lock and strike. Shipping weight: 2 lbs.
2331 HEAVY DUTY DEADBOLT
HOLLOW
METAL
WOOD GRADE 1
E16121
The 2331 Heavy Duty Deadbolt provides a heavy duty
deadbolt lock that expands into the strike for heavy duty
wood or hollow metal applications.
Function
A heavy duty deadbolt for heavy duty metal or wood sliding doors, the 2331
Heavy Duty Deadbolt throws a massive brass bolt into its strike, then expands
two stainless steel dogs to secure the door. A single turn of the key expands
or retracts the bolt. Operates with standard mortise cylinder (standard cam) or
with standard mortise cylinder thumbturn. There is no latch action.
Operation
360° turn of key or thumbturn extends and expands or retracts and withdraws
the bolt. Key cannot be removed unless bolt is positively locked or totally
retracted. Requires special cylinder cam (see details on back of page).
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-31
2331 HEAVY DUTY DEADBOLT
Dimensions Wood Door Preparation
HOW TO ORDER 2331 HEAVY DUTY DEADBOLT
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FINISH
2331 -626
121 To Match Dark Bronze Anodized 313
605 Bright Brass
625 Bright Chrome
626 Satin Chrome
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Cylinders
2331 Heavy Duty Deadbolts are operable by any standard 1-5/32" diameter mortise cylinder with special cam.
1"
25.4mm
2-21/32"
67.5mm
1-3/4"
44.5mm
1-3/64"
26.6mm
4-13/16"
122.2mm
5-25/32"
146.8mm
1-1/32"
26.2mm
5/32"
4mm
1/8"
3.1mm
1/4"
6.4mm
5/16"
7.9mm
9/16"
14.3mm
3-39/64"
91.7mm
4-11/16"
119.1mm
4-1/16"
103.2mm
1/2"
12.7mm
1"
25.4mm
3-1/2"
88.9mm
2-11/16"
68.3mm
1-3/4"
44.5mm
2-9/16"
65.1mm
5/32"
4mm
3-11/16"
93.7mm
33/64"
13.1mm
5-3/4"
146mm
1-9/32"
32.5mm
1-17/64"
32.1mm
3-5/8"
92.1mm
15/64"
6mm
3/4"
19.1mm
3/16"
4.8mm
3/16"
4.8mm
2-11/32"
59.5mm
1-1/2"
38.1mm
11/32"
8.7mm
BOLT
STRIKE
BOLT
CYLINDER
BACKSET
1-1/4"
31.8mmDIA.
(THRU HOLE)
*TAP FOR
8-32 MACHINE
SCREWS
FOR METAL
PILOT FOR
#8 WOOD
SCREW
(6 PLCS)*
R TYP.
NOTE: DIM’S SHOWN
ARE RECOMMENDED
MINIMUM.
7/8"
22.2mm
Lock & Cylinder
Installation
DL-32 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
4070 Series Short
Throw Deadbolt
(Projection Style)
Operation
180° turn of key or thumbturn projects or retracts the bolt.
Accepts any standard 1-5/32" mortise cylinder from either or
both sides. Cylinder must have special cam to fit (as shown).
Specifications
CYLINDER BACKSET
• 7/8", 31/32", or 1-1/8" only.
CASE
• Steel with corrosion-resistant plating. 1" x 6" x depth. Depth
varies by backset.
BOLT
• 5/8" x 1-1/4" x 5/8" throw.
SPECIAL CYLINDER CAM
• 4070 Short Throw Deadbolts are operable by any standard
1-5/32" diameter mortise cylinder with special cam
dimensioned as shown. See CYLINDERS section for cylinder
make, thumbturn and trim ring information.
STRIKE
• In metal installations, a slot in door jamb serves as strike.
Deluxe trim strike 4170 is also available separately for
wood installations.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately.
Shipping weight: 1/2 lb.
4070 SERIES SHORT THROW DEADBOLT
(PROJECTION STYLE)
ALUMINUM GRADE
E8212
The 4070 Short Throw Deadbolt provides security for a
conventionally projected bolt in installations where the long-
throw MS® Deadlock cannot be used. The smaller 4070
offers the longest practical throw from a narrow stile.
Function
For installation where the long-throw MS® Deadlock cannot be
accommodated, the smaller 4070 offers the longest practical throw for a
conventionally projected bolt from a narrow stile. Operates with one-half key
turn of any standard mortise type cylinder or cylinder type thumbturn. This
product is not designed for use in bottom rail.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-33
4070 SERIES SHORT THROW DEADBOLT
(PROJECTION STYLE)
Dimensions Stile Preparation
HOW TO ORDER 4070 SERIES SHORT THROW DEADBOLT (PROJECTION STYLE)
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE BACKSET HANDING FINISH
407 2-2 6-628
0 Flat 1 7/8" 5 LH or RHR 313 Dark Bronze Anodized
1 Radius 2 31/32" 6 RH or LHR 335 Black Anodized
2 Bevel 3 1-1/8" 0 Non-Handed* 628 Clear Anodized
*Any flat or radius faceplate. Specify 4170 Trim Strike if required.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Cylinders Accessories
4070 Short Throw Deadbolts are operable by any standard 1-5/32"
diameter mortise cylinder with special cam.
4170 trim strike for wood installations.
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
CYLINDER
1/4"
6.4mm
5/8"
15.9mm
5/8"
15.9mm
27/32"
21.4mm
5/8"
15.9mm
13/16"
20.6mm
1-7/8"
47.6mm
1-1/4"
31.8mm
5/32"
4mm
1-1/64"
25.8mm
5-41/64"
143.3mm
2-1/8"
54mm
2-3/4"
69.8mm
1-1/2"
38.1mm
1/8"
3.2mm
1"
25.4mm
1"
25.4mm
7/32"
5.6mm
5-9/16"
141.3mm
5-5/8"
142.9mm
5-1/8"
130.2mm
4-3/8"
111.1mm
BOLT CUTOUT
IN STRIKE
DIA.
R TYP.
BACKSET
STILE
“A”
BACKSET “A”
7/8"
22.2mm
1-37/64"
40.1mm
31/32"
24.6mm
1-5/8"
41.3mm
1-1/8"
28.6mm
1-25/32"
45.2mm
ARMORED FACEPLATE
1" X 5-5/8"
FLAT 4070
RADIUS 4071
LH BEVEL 4072-X5
RH BEVEL 4072-X6
Lock & Cylinder Installation
4170 Trim Strike
DL-34 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
4189, 4190
Flush Locksets
(Including Deadlock)
Operation
Both locksets operated from inside by a simple up or down
movement of a slide button, set flush in the deeply recessed
finger pull. The lock mechanism (latching action unavailable)
is the time-tested and field-proven Adams Rite MS1847 and
features the adjustable, self-protecting bolt. Matching “dummy
set” is also available (4195).
Specifications
INSIDE OPERATION
• Vertical slide button projects or retracts deadlock bolt.
OUTSIDE OPERATION (4190 ONLY)
• Key in, five-pin cylinder with Schlage “C” keyway, projects or
retracts bolt.
BACKSET
• Variable, minimum 5/8", maximum 1-9/32" (from face to lock
to escutcheon and cylinder centerline).
STILE THICKNESS
• May be 1" to 1-3/8". Available by special order for stiles 1-3/8"
thick or greater at extra cost.
STILE DEPTH
• Minimum clear depth: backset plus 9/16".
ANTI-LIFT LOCK MECHANISM
• Basic MS 1848-09 (radius ends) or MS1848-10 (square
ends) is supplied. Stainless steel bolt is self-protecting,
adjustable for reach.
ESCUTCHEONS
• Zinc Alloy, Satin Silver epoxy.
4413 INTERIOR PULL
• The 4413 provides a surface-mounted grip-type pull on
doors already equipped with 4189 or 4190 flush hardware.
Mounting is by two machine screws and requires no alteration
to door or flush lockset. Attractive sheer-line design blends
perfectly with the trim appearance of the flush escutcheons,
yet offers a generous hand grip for convenience. Material is
ABS plastic in graphite grey color.
OPTIONS
• Specify 4190 if outside key-cylinder operation required;
4189 if not. Add Dash number -10 for square-ended lock
face or -09 for round end. Cylinder-only operation (one side)
available: 4198 has standard mounting screws, 4196 has
non-removable screws. Dummy set 4195 also available. 4413
Interior Pull available separately.
STANDARD PACKAGE
• 4190, with cylinder, and 4189, without cylinder, are each
complete packages. Shipped individually boxed with
mounting screws. 4190 includes two keys. Standard 4190
units are keyed different (KD). Contact factory for special
keying. Weight: 1-1/4 lbs.
4189, 4190 FLUSH LOCKSETS
(INCLUDING DEADLOCK)
ALUMINUM HOLLOW
METAL
GRADE 2
EB292
The 4189 and 4190 Flush Locksets for sliding doors
combine the time-tested and field-proven Adams Rite
MS1847 with a slide button.
Function
Projecting only 1/10" from the door stile on either side, 4189 and 4190
locksets allow doors to slide freely past other sliding units or stationary
panels. There are no projecting handles to tear draperies or prevent the door
from being “stacked” in a wall packet. 4190 has a flush mounted cylinder
outside. Not recommended for wood doors.
4189
4190
4413
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-35
4189, 4190 FLUSH LOCKSETS
(INCLUDING DEADLOCK)
Dimensions Stile Preparation
Installation
HOW TO ORDER 4189, 4190 FLUSH LOCKSETS (INCLUDING DEADLOCK)
Specify quantity and the following information. Order related products separately.
PRODUCT NO. LOCKSET EXTERIOR LOCK FACE STILE THICKNESS FINISH KEYING OPTIONS PACKAGING
41 90 -09 -1 -130 -01 -IB
89 Without Cylinder 00 Without Lock 1 1" to 1-3/8" 130 To match Clear Anodized 628 00 Without Cylinder IB Individually Boxed
90 With Cylinder 09 Radius 2 1-7/16" to 1-5/8" 121 To match Dark Bronze Anodized 313 01 Keyed Different
95 Dummy 09S Radius Stainless Steel 3 1-11/16" to 2" 119 To match Black Anodized 335 02 Keyed Alike in Pairs
10 Square 50 Keyed Alike (50)
10S Square Stainless Steel
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Special Order Options
4413 Interior Pull. Special keying available by special order only:
1) Keyed alike 2
2) Keyed alike 50
3) Keyed alike 100
1-1/4"
31.8mm
1-1/4"
31.8mm
1/8"
3.2mm
8-25/32"
223mm
6-11/64"
156.8mm
1-5/16"
33.3mm
1-7/64"
28.2mm
1-49/64"
44.8mm
3-11/16"
93.7mm
3-7/32"
81.8mm
1-29/64"
36.9mm
8-21/32"
219.9mm
5/32"
4mm
1-5/64"
27.4mm
17/32"
13.5mm
3/32"
2.5mm
R TYP.
BACKSET
5/8"
15.9mm
MIN 1-9/32"
32.5mm
MAX
LOCATION OF
CYLINDER
ON 4190
LOCKSET ONLY
DRILL AND
CSK FOR
#6 SCREW
(2 PLCS)
EXTERIOR INTERIOR 4413 PULL
4413 PULL
ESCUTCHEONS
LOCK FACE
STILE
ESCUTCHEON
R. TYP
4189-09
4190-09
4189-10
4190-10
ROUND CUTOUT
SQUARE CUTOUT
DL-36 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
4430, 4431
Flush Locksets
(Including Deadlock)
Operation
Both locksets operated from inside by a simple up or down
movement of a slide button, set flush in the deeply recessed
finger pull. The lock mechanism (latching action unavailable)
is the time-tested and field-proven Adams Rite MS1848 and
features the adjustable, self-protecting bolt. Matching “dummy
set” is also available (4432).
Specifications
INSIDE OPERATION
• Vertical slide button projects or retracts deadlock bolt.
OUTSIDE OPERATION (4431 ONLY)
• Key in, five-pin cylinder with Schlage “C” keyway, projects or
retracts bolt. Other cylinder makes not available.
BACKSET
• Variable, minimum 5/8", maximum 1-9/32" (from face to lock
to escutcheon and cylinder centerline).
STILE THICKNESS
• May be 1" to 1-3/8". Available by special order for stiles 1-3/8"
thick or greater at extra cost.
STILE DEPTH
• Minimum clear depth: Backset plus 9/16".
ANTI-LIFT LOCK MECHANISM
• Basic MS 1848-09 (radius ends) or MS1848-10 (square
ends) is supplied. Stainless steel bolt is self-protecting,
adjustable for reach.
ESCUTCHEONS
• Molded ABS resin plastic. Black Satin finish. Deeply recessed
finger pull on both sides. Fits same cutout as metal 4189,
4190 Flush Locksets.
OPTIONS
• Specify 4431 if outside key-cylinder operation required; 4430
if not. Add Dash number -10 for square-ended lock face or
-09 for round end. Dummy set 4432 available. 4453 Interior
Pull available separately.
STANDARD PACKAGE
• 4431, with cylinder, and 4430, without cylinder, are each
complete packages. Shipped individually boxed with
mounting screws. 4431 includes two keys. Standard 4431
units are keyed different (KD). Contact factory for special
keying. Weight: 1-1/4 lbs.
4430, 4431 FLUSH LOCKSETS
(INCLUDING DEADLOCK)
ALUMINUM HOLLOW
METAL
GRADE 2
EB292
The 4430 and 4431 Flush Locksets for sliding doors
combine the time-tested and field-proven Adams Rite
MS1847 with a slide button.
Function
Similar in function and nearly identical in size to the all-metal 4189 and 4190
Flush Locksets, these economical units feature escutcheons molded of sturdy
ABS resin. The black satin finish of the 4430 and 4431 lends elegance to
aluminum door stiles. Not recommended for wood doors.
4430 4431
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-37
4430, 4431 FLUSH LOCKSETS
(INCLUDING DEADLOCK)
Dimensions Stile Preparation Installation
HOW TO ORDER 4430, 4431 FLUSH LOCKSETS (INCLUDING DEADLOCK)
Specify quantity and the following information. Order related products separately.
PRODUCT NO. LOCKSET EXTERIOR LOCK FACE STILE THICKNESS KEYING OPTIONS PACKAGING
44 31 -09 -05 -01 -IB
30 Without Cylinder 00 Without Lock 00 1" to 1-5/16" 00 Without Cylinder IB Individually Boxed
31 With Cylinder 09 Radius 05 1-3/8" to 1-5/8" 01 Keyed Different
32 Dummy 09S Radius Stainless Steel 08 1-3/4" to 2" 02 Keyed Alike in Pairs
10 Square 50 Keyed Alike (50)
10S Square Stainless Steel
1-1/4"
31.8mm
1-1/4"
31.8mm
1/8"
3.2mm
8-29/32"
226.2mm
R
LOCATION OF
CYLINDER
ON 4431
LOCKSET ONLY
EXTERIOR INTERIOR
(4 PLCS)
3/32"
2.4mm
BACKSET
5/8"
15.9mm
MIN 1-9/32"
32.5mm
MAX
ESCUTCHEONS
LOCK FACE
PROJECTION
ABOVE STILE
SURFACE
STILE
ESCUTCHEON
3-11/16"
93.7mm
3-7/32"
81.8mm
1-5/64"
27.4mm
17/32"
13.5mm
1-29/64"
36.9mm
8-21/32"
219.9mm
15/64"
6mm
11/64"
4.4mm
4130-09
4131-09
4130-10
4131-10
ROUND CUTOUT
SQUARE CUTOUT
DRILL AND
CSK FOR #6
SCREW
(2 PLCS)
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Special Order Options
4413 Interior Pull. Special keying available by special order only:
1) Keyed alike 2
2) Keyed alike 50
3) Keyed alike 100
DL-38 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
5017 Wood Door
Deadlock/Deadlatch
Operation
45° rotation of turn or key throws or retracts bolt. Bolt is self-
protecting: if door is shut while bolt is extended, it will retract,
preventing damage or accidental lock-out.
Specifications
BACKSET
• 1-3/16" (1-1/4" including faceplate).
CASE
• Stainless steel, measures 1/2" x 4" x 1-19/32" deep. Bolt is
laminated stainless steel (specify 5015 for zinc plated steel
case and faceplate).
FACEPLATE
• Stainless steel, 5/8" x 4-1/2" with radiused ends.
1015 TURN
• Available with 1016 blank plate shown for doors from 5/6"
to 2-1/4" thickness. Without blank plate turn available (for
use with cylinder pull) on doors from 1-7/16" to 2" thickness.
Standard finish 130, Satin Aluminum enamel.
4026 CYLINDER PULL
• Five pin tumbler cylinder in zinc alloy housing. Standard finish
130 Satin Aluminum.
OPTIONS
• Specify 5015 for zinc plated steel case and faceplate. 1015
Turn for inside operation is available alone (for use with 4026
cylinder pull on outside) or with a blank 1016 outside trimplate
and binder posts (when cylinder is not required). 4810 Box
Strike with wood screws available separately.
STANDARD PACKAGE
• Cylinder pulls and/or thumbturns available separately.
Shipping weight: 1/2 lb.
5017 WOOD DOOR DEADLOCK/DEADLATCH
WOOD GRADE 2
EB292
The 5017 Wood Door Deadlock/Latch provides the strength
and deeper backset required to secure sliding wood doors.
Function
For wood framed sliding doors, the 5017 Wood Door Deadlock/Latch provides
the same thousand pound strength that the MS1847 Deadlock/Latch provides for
metal stiles. A deeper backset clears the recessed jamb used with wood doors.
The bolt throw is easily adjusted by means of a screw in the faceplate. Mounting
is by through-bolts, which also secure the inside turn and outside cylinder when
installed.
4810 BOX
STRIKE
1015
4026
CYLINDER
PULL
1016 PLATE
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-39
1/2"
12.7mm
5/8"
15.9mm
27/32"
21.4mm
1/8"
3.18mm
7/32"
5.6mm
1-1/4"
31.8mm
4"
101.6mm
4"
101.6mm
4-1/2"
114.3mm
2-9/16"
65.1mm
3-1/8"
79.4mm
3-7/8"
98.4mm
1/8"
3.2mm
2-9/16"
65.1mm
7/8"
22.2mm
5/8"
15.9mm
3/4"
19mm
1-3/16"
30.2mm
17/32"
13.5mm
4-1/16"
103.2mm
3/8"
9.5mm
1/8"
3.2mm
1-9/16"
39.7mm
9/16"
14.3mm
2-9/16"
65.1mm
3-3/8"
85.7mm
1/16"
1.6mm
11/16"
17.45mm
1-19/32
40.5mm
2-27/32"
72.2mm
2-3/8"
60.3mm
19/64"
7.5mm
1-1/32
26.2mm
51/64
20.2mm
FULL RADIUS
BOTH ENDS
(5017)
5017
4026 1016 1015
4810
10-32
(2 PLCS)
1-7/32"
31mm 19/32"
15.1mm
3/4"
19.1mm
MOUNTING SCREWS
AND POSTS FURNISHED
DIA.
7/32"
5.6mm DIA.
MIN
R
(2 PLCS)
(4 PLCS)
5017 WOOD DOOR DEADLOCK/DEADLATCH
Dimensions Stile Preparation
FOR LOCK, TURN & CYLINDER PULL
Jamb Preparation
FOR STRIKE
HOW TO ORDER 5017 WOOD DOOR DEADLOCK/DEADLATCH
Specify quantity and the following information. Order related products separately.
PRODUCT NO. LATCH CONFIGURATION
5017 -00
00 Standard
02 Self Latching
For installation with cylinder, specify quantity of 4026 cylinder pulls and door thickness.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories
Turn and cylinder pull. 4810 Box Strike.
DL-40 DEADLOCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
OPTIONS & ACCESSORIES FOR DEADLOCKS
Options &
Accessories for
Deadlocks
Adams Rite Deadlocks including the MS® Maximum
Security Deadlocks can be ordered with a variety
of related products including strike plates, cylinder
accessories and trim. Different deadlocks have different
installation and cylinder requirements. Please refer to
product pages for more information on all available
deadlock types, functions, installation requirements and
complete How-to-Order guides.
For more detailed information on any of the products
listed below please refer to the corresponding section
of this catalog.
ACCESSORIES
4000 SERIES MS DEADLOCK STRIKES
4000 surface mounted strike plate, 4001 strike plate with dust box, 4005 threshold
strike, 4006 floor strike, 4505 armored strike, or 4003 ANSI strike add aesthetics
and finish to strike cutouts in jambs.
4800 SERIES STRIKES
4801 for hollow metal, 4802 for wood, or MS4804 reinforcing strike, the 4800
Series Strikes boast vertical adjustment and include a shim system for horizontal
positioning for nearly any sliding door using a mortised MS1847 Deadlock or latch.
HEADER BOLTS
4015 Threshold Bolt is a two-point lock that easily secures a single door entrance.
Security for pairs of doors with single key turning is possible with the 4016 Header
Bolt. The three-point lock easily secures the entire double door entrance when
working in conjunction with an MS Deadlock. 4085 Header Bolt facilitate top-of-
door third locking point for pairs of doors when working in conjunction with an MS
pivoted bolt deadlock and 4015 Threshold Bolt in the active leaf.
EXIT INDICATOR
The 4089 Exit Indicator provides exit door notification for various
Adams Rite deadlocks.
CYLINDERS
CYLINDER PULLS
The 4024, 4025, 4026 Cylinder Pulls are designed to
operate Adams Rite MS1847 Deadlocks and 5017 Wood
Door Deadlock.
4036 MORTISE CYLINDER
The 4036 Mortise Cylinder is a standard 1" long, 1-5/32"
diameter cylinder that provides five-pin security with most
Adams Rite locks or latches.
4066 THUMBTURN
The 4066 Thumbturn interchanges with standard 1-5/32"
diameter mortise cylinder and operates locks or latches
without a key.
MS4043 CYLINDER GUARD
The MS4043 Cylinder Guard is a hardened-steel, free-
swiveling ring to protect cylinder from vandalism such as
prying or twisting.
Dimensions of MS cam to operate Adams Rite deadlocks,
excluding 4070 Deadlock and 2331 Deadlock.
Dimensions of cam to operate Adams Rite 4070 Deadlock.
Dimensions of cam to operate Adams Rite 2331 Deadlock.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS®LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS®LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS®LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS DL-41
OPTIONS & ACCESSORIES FOR DEADLOCKS
TRIM
1000 TURNS
The 1000 Turns with or without escutcheon are designed to operate
Adams Rite MS1847 Deadlocks and 5017 Wood Door Deadlock.
These turns mount easily to door pull or other trim plate using push-nut
mounting. The 1004 Turn has a longer, more ergonomically-friendly
turn lever, the 1015 Turn is available for wood door applications with
the 5017 Wood Door Deadlock.
3090 KEYLESS ENTRY
A battery-operated keyless entry control device, the eForce-150
3090 Keyless Entry provides access control for Adams Rite
deadlocks, deadlatches, and exit devices for aluminum stile, steel,
and wood door applications.
The eForce 3090P (Prox) and 3090C (iCLASS) Keyless Entries
provide maximum security with either HID® Prox or iCLASS
contactless card reader.
4550 DEADLOCK LEVER
The 4550 MS Deadlock Lever easily unlocks an MS Deadlock with
approximately 3 pounds of downward force. The spring-loaded lever
relocks with an upward motion. Can be installed in place of existing key
cylinder or cylinder type thumbturn on inside of door.
DEADLATCH PADDLE
The 4590, 4591 Deadlatch Paddle is an ergonomically-friendly
alternative to a knob or lever handle. Operate the MS+1890 Deadlock/
Latch or 2190, 2290 Interconnected Deadbolt/Deadlatch with a simple
push or pull.
DL-42 DEADLOCKS
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Steel Hawk
4300 Electrified
Deadlatch (eLatch)
Operation
Turn key, apply voltage, or operate handle or paddle to
release the spring-loaded latchbolt. Electrically-rated for
continuous duty for timed applications. Interface with access
control. Uses any standard mortise cylinder with MS® cam.
Specifications
CYLINDER BACKSET
• 31/32", 1-1/8", and 1-1/2".
CASE
• Measures 15/16" x 5-13/16" x depth. Depth varies
by backset (see table on back of page). Steel with
corrosion-resistant plating.
LATCHBOLT
• 5/8" x 1" x 5/8" throw. Stainless steel.
AUXILIARY BOLT
• All metal. Deadlocks latchbolt to prevent “loiding” or
case-knife entry.
FACEPLATES
• Measures 1" x 6-7/8". Both flat and radius faceplates are
supplied. Flat faceplates can also be adjusted in the field
for right or left beveled edge doors.
VOLTAGE
• Field-selectable to match power source of 12, 16, or 24
VAC/VDC
CURRENT DRAW/AMPS
VOLTS DC CONTINUOUS
12 0.44
16 0.458*
24 0.23
*Required 16 VDC adapter (P/N VA 7400-16VDC)
STRIKES
• Pick from optional strikes. 4304 no-cut surface mounted
strike for easy retrofits. Specify mortised-flush version 4901
when covering existing MS® deadlock preparation or for
new applications. 4901 is available with radius profiles for
pairs of doors and with extended lips of center-hung or thick
door applications doors.
STEEL HAWK
4300 ELECTRIFIED DEADLATCH (ELATCH)
STEEL HAWK
4300 ELECTRIFIED DEADLATCH (ELATCH)
ALUMINUM ELECTRIFIED
PRODUCT
GRADE 1
E8231
The Steel Hawk 4300 Electrified Deadlatch (eLatch)
combines non-handed, narrow backset, mechanical
locking hardware with electrified access control.
Function
The 4300 eLatch combines mechanical locking hardware with electrified
access control while working within standard aluminum entrance door
preparations. Always operable from the inside via handle or paddle device.
Entry via keyed mortise cylinder or access control element. Fail-secure lock
with optional form “C” latch status monitor. The standard 4300 operates
on 12, 16, or 24 volt DC power and is rated for continuous duty. Units are
equipped with a quick connect plug-in type connector. Interchangeable without
stile modification for MS® Deadlocks or 4500 and 4900 Deadlatches. 1-3/4"
minimum door thickness required.
4901 STRIKE
CYLINDER CAM
• 4300 Electrified Deadlatches are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam dimensioned
as shown. Cylinders with MS cams can be readily obtained
from most cylinder manufacturers. See CYLINDERS section
for cylinder make, thumbturn and trim ring information.
OPTIONS
• Backset, strike, and finish must be specified when ordering.
Please select monitoring option if request to exit (REX)
is required. If selected, an external request to exit (REX)
feature in exit trim is not required with the 4300 Electrified
Deadlatch.
STANDARD PACKAGE
• Individually boxed with flat and radius faceplates, strike, and
machine screws for mounting. Supplied with universal cam
plug 4581 to work with specified handles or paddle operators.
Cylinder, paddle, or handle available separately. Shipping
weight: 1-1/4lbs.
RITE Pack®
• The Steel Hawk 4300 RITE Pack conveniently pairs the
non-handed, narrow backset, electrified deadlatch with the
flexibility of multiple faceplates in a single, simple package.
• The RITE Pack includes one electrified deadlatch
and four faceplates.
• 2 flat faceplates: one clear (628) and one dark bronze
anodized finish (313)
• 2 radius faceplates: one clear (628) and one dark bronze
anodized finish (313)
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE *TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DA-1
DEADLATCHES
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
27/64"
10.7
mm
6-13/16"
173mm
5/8"
15.9mm
5/8"
15.9mm
1"
25.4mm
63/64"
25mm
“A”
1-7/16"
36.5mm
2-49/64"
70.2mm
5-51/64"
147.2mm
6-3/8"
161.9mm
“B”
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
STEEL HAWK
4300 ELECTRIFIED DEADLATCH (ELATCH)
Dimensions Stile Preparation Latch, Paddle & Cylinder Installation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
Lock mounting
accessories and options.
4300 Electrified Deadlatch is operable by any standard
1-5/32" diameter mortise cylinder with MS® cam.
Entry trim, paddles
and handles.
4605 Transformer, 4603 Rectifier,
PS-1, and 4612 Power Transfer Device.
HOW TO ORDER STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH)
Specify quantity and the following information. Order related products separately.
Product No. BACKSET MONITORING STRIKE STIRKE SHAPE/LIP LENGTH FACEPL ATE FINISH
4300 -3 M-2 01 -628
2 31/32" 0 None 1 Surface Mount (4304) 01 Flat/Standard Jamb 313 Dark Bronze Anodized
3 1-1/8" M Monitored 2 Mortised (4901) 4-5/8" 02 Radius/Standard Stiles** 335 Black Anodized
4 1-1/2" 17 Flat/Center Hung 4" Jamb** 628 Clear Anodized
21 Flat/Center Hung 4-1/2" Jamb**
** See ACCESSORIES for available 4901 strike options
4300 STEEL HAWK RITE PACK
Specify quantity and the following information. Order related products separately.
Product No. BACKSET MONITORING STRIKE RITE Pack
4300 -3 0-1 RP
2 31/32" 0 None 1 Surface Mount (4304)
3 1-1/8" 2 Mortised (4901) 4-5/8"
ARMORED FACEPLATE
1" X 6-7/8"
FLAT (INCLUDED)
P/N 24-0076-01-XXX*
RADIUS (INCLUDED)
P/N 24-0076-02-XXX*
RADIUS W/ WEATHERSTRIP
P/N 24-0076-03-XXX*
BACKSET A DIM. B
31/32"
24.6mm
1-19/32
40.5mm
1-1/8"
28.6mm
1-49/64"
44.8mm
1-1/2"
38.1mm
2-9/64"
54.4mm
FLAT FACEPL ATE CAN
BE ADJUSTED FOR
RIGHT OR LEFT BEVELED
EDGE DOORS. RADIUS
WEATHERSTRIP IS
OPTIONAL.
ADJUSTABLE MOUNTING TUBE BRACKET MAY
BE REMOVED FOR MOUNTING ON BRIDGES,
TABS, OR EITHER METHODS.
ADJUSTABLE MOUNTING
TUBE BRACKET MAY BE
REMOVED FOR MOUNTING
ON BRIDGES, TABS, OR
EITHER METHODS.
4581
Cam Plug Assy.
“A”
1-19/32"
40.5mm
6-57/64"
175mm
1"
25.4mm
R
5/32"
4mm
TYP.
1-7/16"
36.5mm
2-49/64"
70.2mm
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
DEADLATCHES
DA-2
4510 Standard
Duty Deadlatch
Specifications
BOLT HOLDBACK
• While bolt is held fully retracted, a
reverse turn of the key retains the bolt,
allowing the door to be free swinging.
CYLINDER BACKSET
• 7/8", 31/32", 1-1/8" or 1-1/2" only.
CASE
• Measures 1" x 5-13/16" x depth. Depth varies by
backset (see table on back of page). Steel with
corrosion-resistant plating.
LATCHBOLT
• 1/2" x 1" x 1/2" throw. All metal with hardened steel internal
pins. Handing is reversible without special tools.
AUXILIARY BOLT
• All metal. Deadlocks latchbolt to prevent “loiding” or
case-knife entry.
FACEPLATE
• Measures 1" x 6-7/8".
STRIKES
• Standard strike furnished is 4902-01 for flat jamb where
door closes flush or nearly flush. Available separately:
radius strike for opposite stile in paired doors; longer strike
(4901) to cover slot strike of MS lock; long lip strikes for
centerhung doors.
CYLINDER CAM
• 4510 Standard Duty Deadlatches are operable by any
standard 1-5/32" diameter mortise cylinder with MS® cam
dimensioned as shown. Cylinders with MS® cams can be
readily obtained from most cylinder manufacturers. See
CYLINDERS section for cylinder make, thumbturn and trim
ring information.
OPTIONS
• Backset, faceplate shape, strike, handing, and finish must
be specified when ordering.
STANDARD PACKAGE
• Individually boxed with strike, and machine screws for
mounting. Cylinders, paddles, and handles available
separately. Shipping weight: 1-1/4 lbs. Also available
in a 25-unit pack for volume customers.
4510 STANDARD DUTY DEADLATCH
ALUMINUM GRADE 1
E8231
4510 Standard Duty Deadlatches provide flexible traffic
control during and after business hours.
Function
The 4510 Standard Duty Deadlatch offers flexibility of traffic control during and
after business hours. A reverse turn of the key while the bolt is held retracted
retains the bolt to allow two-way traffic for hospitals, banks, stores, and other
buildings which require free entrance at certain times and exit-only at other
times. Interchangeable, without stile modification, with any MS1850A or
MS1850S Deadlock of same backset and faceplate shape. Does not, however,
provide the same maximum security level as the MS® Deadlock.
Operation
Turn key or operate handle to retract spring-loaded Latchbolt. To hold bolt
retracted, push it in and secure by reverse turn of key. Uses any standard
mortise cylinder with MS® dimensioned cam.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE *TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
PATENTED
4902-1
STRIKE
FURNISHED
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLATCHES DA-3
4510 STANDARD DUTY DEADLATCH
Dimensions Stile Preparation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Electric Strikes
Lock mounting accessories
and options.
4510 Standard Duty Deadlatches are operable by any
standard 1-5/32" diameter mortise cylinder with MS® cam.
Entry trim, paddles, handles
and lever operators.
Application specific.
HOW TO ORDER 4510 STANDARD DUTY DEADLATCH
Specify quantity and the following information. Order related products separately.
Product No. FACEPL ATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPL ATE FINISH
451 1-3 6-2 01 -628
0 Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized
1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized
1W Radius with weatherstrip 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized
2 Bevel 4 1-1/2" 21 Flat/Center Hung 4-1/2" Jamb
BACKSET
TAP 10-32
2 PLACES
L
C
STILE
DIA.
R TYP.
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
MAX.
BOLT
CUTOUT
IN STRIKE
L
C
L
C
CYLINDER
BACKSET MEASURED
AT CENTERLINE OF STILE NOSE
SHOWN RIGHT HAND.
REVERSIBLE BY REMOVING
BOLT AND RE INSTALLING
FOR OPPOSITE HAND.
HOW BACKSET
IS MEASURED:
57/64"
22.6mm
1/2"
12.7mm
1"
25.4mm
1-19/32"
40.5mm
6-57/64"
175mm
1-1/64"
25.8mm 5/32"
4mm
6-3/8"
162mm
1-1/4"
31.8mm
17/32"
13.5mm
6-13/16"
173mm
5-51/64"
147.2mm
7/32"
5.6mm
1-7/16"
36.5mm 6-7/8"
174.6mm
6-3/8"
162mm
1/2"
12.7mm
1/4"
6.4mm
7/8"
22.2mm
2-1/4"
57.2mm
“A”
Latch Paddle & Cylinder Installation
Identical to MS 1850A Series (See also prep for 4590 Paddle)
BACKSET “A”
7/8"
22.2mm
1-33/64"
38.5mm
31/32"
24.6mm
1-19/32"
40.5mm
1-1/8"
28.6mm
1-49/64"
44.8mm
1-1/2"
38.1mm
2-9/64"
54.4mm
ARMORED FACEPLATE
1" X 6-7/8"
FLAT 4510
RADIUS 4511
RADIUS W/ WEATHERSTRIP
4511W
LH BEVEL 4512-X5
RH BEVEL 4512-x6
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
DA-4 DEADLATCHES
4530 Standard
Duty Deadlatch
Specifications
BOLT HOLDBACK
• While bolt is held fully retracted, a
reverse turn of the key retains the bolt,
allowing the door to be free swinging.
CYLINDER BACKSET
• 7/8", 31/32", or 1-1/8" only.
CASE
• Measures 1" x 5-13/16" x depth. Depth varies by backset
(see table on back of page). Steel with
corrosion-resistant plating.
LATCHBOLT
• 1/2" x 1" x 1/2" throw. All metal with hardened steel internal
pins. Handing is reversible without special tools.
AUXILIARY BOLT
• All metal. Deadlocks latchbolt to prevent “loiding” or
case-knife entry.
FACEPLATE
• Measures 1-1/4" x 7-13/32".
STRIKES
• Standard strike furnished is 4901-01 for flat jamb. For
dimensions of this as well as radiused and/or short strikes
see ACCESSORIES section of this catalog.
CYLINDER CAM
• 4530 Standard Duty Deadlatches are operable by any
standard 1-5/32" diameter mortise cylinder with MS® cam
dimensioned as shown. Cylinders with MS® cams can be
readily obtained from most cylinder manufacturers. See
CYLINDERS section for cylinder make, thumbturn and trim
ring information.
OPTIONS
• Backset, faceplate shape, strike, handing, and finish must
be specified when ordering.
STANDARD PACKAGE
• Individually boxed with strike and machine screws for
mounting. Cylinders, paddles, and handles available
separately. Shipping weight: 1-1/4 lbs.
4530 STANDARD DUTY DEADLATCH
4530 Standard Duty Deadlatches provide flexible
traffic control during and after business hours. Designed
to retrofit into the prep of older MS1850 Deadlocks and
4250 Deadlatches.
Function
The 4530 Standard Duty Deadlatch offers flexibility of traffic control during and
after business hours. A reverse turn of the key while the bolt is held retracted
retains the bolt to allow two-way traffic for hospitals, banks, stores, and other
buildings which require free entrance at certain times and exit-only at other times.
4530 Deadlatches are designed to fit without alteration, the stile cutout for older
MS1850 Deadlocks and discontinued 4250 Deadlatches of same backset.
Operation
Turn key or operate handle to retract spring-loaded Latchbolt. To hold bolt
retracted, push it in and secure by reverse turn of key. Uses any standard
mortise cylinder with MS® dimensioned cam.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE *TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
4901-1
STRIKE
FURNISHED
ALUMINUM GRADE 1
E8231
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLATCHES DA-5
4530 STANDARD DUTY DEADLATCH
Dimensions Stile & Jamb Preparation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Electric Strikes
Lock mounting accessories
and options.
4530 Standard Duty Deadlatches are operable by any
standard 1-5/32" diameter mortise cylinder with MS® cam.
Entry trim, paddles, handles
and lever operators.
Application Specific.
HOW TO ORDER 4530 STANDARD DUTY DEADLATCH
Specify quantity and the following information. Order related products separately.
Product No. FACEPL ATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH
453 1-3 6-1 01 -628
0 Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized
1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized
2 Bevel 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized
21 Flat/Center Hung 4-1/2" Jamb
BACKSET MEASURED
AT CENTERLINE
OF STILE NOSE
SHOWN RIGHT HAND.
REVERSIBLE BY REMOVING
BOLT AND REINSTALLING
FOR OPPOSITE HAND.
17/32"
13.5mm
7-27/64"
188.5mm
1-1/4"
31.8mm
1-1/4"
31.8mm
7/8"
22.2mm
51/64"
20.2mm
7/32"
5.6mm
7-3/8"
187.3mm
5-51/64"
147.2mm 1-7/16"
36.5mm
17/32"
13.5mm
7-13/32"
188.1mm
6-31/32"
177mm
“A”
1/4"
6.4mm
5/32"
4mm
HOW BACKSET
IS MEASURED:
CYLINDER
REMOVE
FLAT
RADIUS
BEVEL
R TYP.
7/8"
22.2mm
BOLT
CUTOUT
IN STRIKE
CYLINDER
Latch Paddle & Cylinder
Installation
To replace old MS1850 lock or
4250 latch of same backset:
NO PREPARATION REQUIRED
To replace 4070 lock, old 4050
latch, 970 lock or 1450 latch of
same backset:
BACKSET “A”
7/8"
22.2mm
1-33/64"
38.5mm
31/32"
24.6mm
1-19/32"
40.5mm
1-1/8"
28.6mm
1-49/64"
44.8mm
ARMORED FACEPLATE
1-1/4" X 7-13/32"
FLAT 4530
RADIUS 4531
LH BEVEL 4532-X5
RH BEVEL 4532-X6
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
DA-6 DEADLATCHES
4781 Two-Point
Deadlatch with Paddle
Inside Operation
Push paddle to unblock top bolt and withdraw bottom bolt.
Continuing to push will open the door in a very natural,
ergonomically-friendly motion. Paddle stroke is approximately
1-1/2" at extreme end. Rod adjustment allows paddle
(centerline) to be mounted at any height from 30 to 44 inches
above the finished floor.
Outside Operation
If key entry operation is required, any standard mortise cylinder
with MS® cam can be installed through an 8650 Cylinder
Escutcheon. Any of the entry trim available with Adams Rite exit
devices can be specified, in the version used for CVR devices.
Specifications
PADDLE DOGGING
• Turning hex screw in paddle escutcheon holds paddle
down, leaving door free-swinging.
TOP BOLT
• Similar to door latches on some automobiles and aircraft,
the U-shaped bolt wraps around the strike post to
deadlock position, which also deadlocks the bottom bolt
through a gear train at the center of the rod assembly.
HEADER STRIKE
• A flanged post installed on the header has generous
location adjustment to allow for door misalignment,
sag, bumpers, etc. Designed to prevent forced entry
by bowing the door.
BOTTOM BOLT
• Stainless hexagonal steel bolt requires only a 1/2"
diameter hole in threshold for a strike.
DOOR SIZE
• Standard unit will fit doors up to 66" above the paddle
height (110" door if paddle is at max 44" height).
For taller doors, order 8655 Tall Door Kit, which allows up
to 97" above paddle.
OPTIONS
• Can be exit only or allow key access from outside
with use of 8650 Cylinder Escutcheon. Entry trim
available with Adams Rite exit devices can also be
specified, in the version used for CVR devices.
STANDARD PACKAGE
• Individually boxed with mounting screws and installation
instructions. Shipping weight: 3 lbs.
4781 TWO-POINT DEADLATCH WITH PADDLE
ALUMINUM
The 4781 Two-Point Deadlatch latches to header and
threshold allowing both door leaves to remain active. It is
designed for paired outswinging narrow stile doors, but is
also suitable for single doors.
Function
Designed for paired outswinging narrow stile doors but also suitable for single
doors. Instead of operating a conventional horizontal-throw latchbolt, the 4781
Two-Point Deadlatch latches to header and threshold. This allows both door
leaves to be “active”. There is no need to pin one door with flushbolts or other
devices. The paddle is a modified version of the 4591 Deadlatch Paddle (see
TRIM) and the concealed vertical rod mechanism is the same as used in Adams
Rite’s 8600 Series Exit Devices (see EXIT DEVICES). Note, however, that the
4781 Two-Point Deadlatch is not intended to substitute for an exit device, which
must have a door-spanning bar.
4781
PADDLE
HEADER
STRIKE
8650
ESCUTCHEON
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLATCHES DA-7
1/2"
12.7mm
CVR
INSTALLATION
HOLE
10-32 X 5/16
SCREW
FLAT HEAD
UNDERCUT
(5 PLCS)
STRIKE
PLATE
ASSEMBLY
RIVNUT
(2 PLCS)
ESCUTCHEON
PADDLE
FOR 4781
PIVOT
PIN
SET
SCREW
3/4"
19.1mm
3/4"
19.1mm
3/4"
19.1mm
1-3/8"
34.9mm
1-5/8"
41.3mm
3/8"
9.5mm
BACKSET
(OUTSIDE ONLY)
OF PADDLE
OF CYLINDER
(2 PLCS)
DRILL BEFORE
1-3/8" DIA. HOLE
DIA.
DIA.
IMPORTANT
1-1/4"
31.8mm
5-1/8"
130.2mm
30"
762mm
1-3/64"
26.6mm
44"
1117.6mm
66"
1676.4mm
1-1/4"
31.8mm
X
MIN I.D.
UP TO
OR
PADDLE
HEIGHT
*Other cylinder escutcheons for use with 17mm profile cylinders (in 44 or 55mm
thick doors only) are also available and require different door prep than shown.
DRILL BOTH SIDES
(FOR #10-32
SCREW & CSK
INTERIOR ONLY)
NOTE: THESE
DIMENSIONS AND
TEMPLATES ASSUME
A DOOR 1-3/4" THICK
WITH 1/8" STILE WALL.
DOORS WITH OTHER
THICKNESS OR
WALL WILL REQUIRE
MODIFICATION
TO THE DEVICE.
SEE TRIM SECTION FOR
COMPLETE DIMENSIONS
OF 4591 PADDLE.
BACKSET FOR
NARROW STILE.
CAN BE INCREASED
FOR MEDIUM OR WIDE.
1/4"
6.4mm
1-3/64"
26.6mm
3/4"
19.1mm
DIA.
INTERIOR
FACE OF
DOOR
INTERIOR
SIDE OF
HEADER
1-1/4"
31.8mm
1"
25.4mm
1"
25.4mm
1"
25.4mm
1"
25.4mm
1-1/2"
38.1mm
1-3/64"
26.6mm
BACKSET
3"
76.2mm
5/8"
15.9mm
1/4"
6.4mm
3/8"
9.5mm
1/2"
12.7mm
1/2"
12.7mm
7/8"
22.2mm
DIA.
INSIDE ONLY
INTERIOR
FACE OF
DOOR
1/4"
6.4mm DIA.
BACKSET
DIA.
(2 PLCS)
INSIDE ONLY
FOR #10-32
SCREWS
(5 PLCS)
4781 TWO-POINT DEADLATCH WITH PADDLE
Dimensions Door Preparation
Door Preparation
WITH 8650 ESCUTCHEON*
Installation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Special Order Options
8650 Cylinder Escutcheon.
8655 Tall Door Kit.
4781 Two-Point Deadlatch is operable by any standard 1-5/32" diameter
mortise cylinder with MS® cam.
4036 Mortise Cylinder.
3080 Entry Trim.
HOW TO ORDER 4781 TWO-POINT DEADLATCH Specify quantity and the following information. Order related products separately.
Product no. OPERATION PADDLE FINISH
4781 T-021 -628
T Top rod only 021 Push to LEFT 313 Dark Bronze Anodized US3 Bright Brass
– Standard rod 041 Push to RIGHT 335 Black Anodized US26 Bright Chrome
628 Clear Anodized US26D Satin Chrome
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
DA-8 DEADLATCHES
4900 Heavy
Duty Deadlatch
Specifications
BOLT HOLDBACK
• While bolt is held fully retracted, a
reverse turn of the key retains the bolt,
allowing the door to be free swinging.
CYLINDER BACKSET
• 31/32", 1-1/8", or 1-1/2".
CASE
• Measures 7/8" x 5-13/16" x depth. Depth varies by backset
(see table on back of page). Steel with corrosion-resistant
plating. Screw-fastened tube spacer brackets allow for
cleaner removal when tab mounting.
LATCHBOLT
• 5/8" x 1" x 5/8" throw. Solid brass. Handing is easily
reversible using only a screwdriver.
AUXILIARY LATCHPIN
• Stainless steel. Deadlocks Latchbolt to prevent “loiding”
or case-knife entry.
FACEPLATES
• Measures 1" x 6-7/8". Both flat and radius faceplates are
supplied. Flat faceplates can also be adjusted in the field for
right or left beveled edge doors.
STRIKES
• Standard strike furnished is 4902 for flat jamb where
door closes flush or nearly flush. Specify 4901 for retrofit
installations. Also available: radius strike for opposite stile in
paired doors and long lip strikes for centerhung doors.
CYLINDER CAM
• 4900 Heavy Duty Deadlatches are operable by any
standard 1-5/32" diameter mortise cylinder with MS® cam
dimensioned as shown. Cylinders with MS® cams can be
readily obtained from most cylinder manufacturers. See
CYLINDERS section for cylinder make, thumbturn and
trim ring information.
OPTIONS
• Backset, strike, and finish must be specified when ordering.
See 4920AN Heavy Duty Deadlatch (ANSI Size) for wood
and hollow metal door applications.
STANDARD PACKAGE
• Individually boxed with flat and radius faceplates,
strike, and machine screws for mounting. Order cylinders,
paddles, handles, or lever operators separately.
Shipping weight: 1-1/4 lbs.
4900 HEAVY DUTY DEADLATCH
ALUMINUM GRADE 1
E8231
4900 Heavy Duty Deadlatch provides flexible traffic control
and easy installation.
Function
Flexibility of traffic control and installation is offered by 4900 Heavy Duty
Deadlatches. A reverse turn of the key while bolt is held retracted retains
the bolt, to allow two-way traffic for applications which require free entrance
at certain times and exit-only at other times. Interchangeable, without stile
modification, with any MS1850A or MS1850S deadbolt of same backset
and faceplate shape. Also retrofits to existing 4500 and 4700 Deadlatch
preparations. 1-3/4" minimum door thickness required.
Operation
Turn key or operate handle or paddle to retract spring-loaded Latchbolt. To hold
bolt retracted, push it in and secure by reverse turn of key. Uses any standard
1-5/32" mortise cylinder with MS® dimensioned cam.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE *TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
4902
STRIKE
FURNISHED
FIELD REVERSIBLE
LATCHBOLT
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLATCHES DA-9
4900 HEAVY DUTY DEADLATCH
Dimensions Stile Preparation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Electric Strikes
Lock mounting accessories
and options.
4900 Heavy Duty Deadlatches operable by any standard
1-5/32" diameter mortise cylinder with MS® cam.
Entry trim, paddles, handles
and lever operators.
Application specific.
HOW TO ORDER 4900 HEAVY DUTY DEADLATCH
Specify quantity and the following information. Order related products separately.
Product No. Faceplate BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPL ATE FINISH
49 00 -3 5-2 01 -628
00 Standard 2 31/32" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized
11W Radius w/Weatherseal 3 1-1/8" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stile 335 Black Anodized
4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized
21 Flat/Center Hung 4-1/2" Jamb
SHOWN RH/LHR.
BOLT IS REVERSIBLE
FOR OPPOSITE HAND.
HOW BACKSET
IS MEASURED: BACKSET
STILE
TAP 10-32
2 PLACES
DIA.
R TYP.
BACKSET MEASURED
AT CENTERLINE
OF STILE NOSE
29/32"
23mm
5/8"
15.9mm
1/4"
6.4mm 1-1/4"
31.8mm
6-3/8"
161.9mm
5/32"
4mm
1-19/32"
40.5mm
1"
25.4mm
1-1/64"
25.8mm
“A”
1/2"
12.7mm
6-7/8"
174.6mm
6-57/64"
175mm
7/8"
22.2mm
6-51/64"
172.6mm
5-51/64"
147.2mm
MAX.
2-15/32"
62.7mm
6-3/8"
161.9mm
19/32"
15.1mm
3/8"
9.5mm
1-7/16"
36.5mm
CYLINDER
CYLINDER
FLAT
RADIUS
BEVEL
BOLT
CUTOUT
IN STRIKE
Latch Paddle & Cylinder
Installation
BACKSET “A”
31/32"
24.6mm
1-5/8"
41.3mm
1-1/8"
28.6mm
1-49/64"
44.8mm
1-1/2"
38.1mm
2-9/64"
54.4mm
ARMORED FACEPLATE
1" X 6-7/8"
FLAT
P/N 24-0137-01-XXX
RADIUS
P/N 24-0137-02-XXX
RADIUS W/ WEATHERSTRIP
P/N 24-0137-03-XXX
Flat faceplate can be
adjusted for right or left
beveled edge doors.
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Identical to MS1850A or MS1850S Series
(See also prep for 4591 paddle).
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
DA-10 DEADLATCHES
4920AN Heavy Duty
Deadlatch (ANSI Size)
Operation
Turn key or operate handle to retract spring-loaded Latchbolt. To
hold bolt retracted, push it in and secure by reverse turn of key.
Uses any standard mortise cylinder with MS® dimensioned cam.
Specifications
BOLT HOLDBACK
• While bolt is held fully retracted, a
reverse turn of the key retains the bolt,
allowing the door to be free swinging.
CYLINDER BACKSET
• 1-1/2" or 2-3/4" only.
CASE
• Measures 7/8" x 5-13/16" x depth. Depth varies
by backset (see table on back of page). Steel with
corrosion-resistant plating.
LATCHBOLT
• 5/8" x 1" x 5/8" throw. Solid brass. Handing is easily
reversible using only a screwdriver.
AUXILIARY LATCHPIN
• Stainless steel. Deadlocks latchbolt to prevent “loiding”
or case-knife entry.
FACEPLATE
• 1-1/4" x 8" armored flat faceplate can also be adjusted in
the field for right or left beveled edge doors.
STRIKES
• Stainless steel, US32D Satin finish (630). 4506-02 Strike
furnished to ANSI preparation specifications for flat jamb.
CYLINDER CAM
• 4920AN Heavy Duty Deadlatches are operable by any
standard 1-5/32" diameter mortise cylinder with MS® cam
dimensioned as shown. Cylinders with MS® cams can be
readily obtained from most cylinder manufacturers. See
CYLINDERS section for cylinder make, thumbturn and
trim ring information.
OPTIONS
• Backset, strike, and finish must be specified when ordering.
See 4900 Heavy Duty Deadlatch for aluminum stile door
applications.
STANDARD PACKAGE
• Individually boxed with faceplate, strike, and machine
screws for mounting. Order cylinders, paddles, handles
or lever operators separately. Shipping weight: 1-1/4 lbs.
4920AN HEAVY DUTY DEADLATCH (ANSI SIZE)
HOLLOW
METAL
WOOD GRADE 1
E8231
4920AN Heavy Duty Deadlatch provides flexible traffic
control and easy installation for wood or hollow metal doors.
Function
For hollow metal or wood doors prepared for hardware according to the
specifications of the American National Standards Institute (ANSI), 4920AN
Heavy Duty Deadlatches provide precise traffic control. A key-controlled bolt
hold-back feature allows a door to free-swing part of the day and exit-only
when the bolt is free to latch. This allows a “locked” entrance to be used as an
exit by customers or visitors already in the building. Interchangeable, without
door modification, with any MS1850SN Deadlock of same faceplate shape
and backset. Replaces 4520 and 4720 ANSI Deadlatches. 1-3/4" minimum
door thickness required.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS®LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
4506-02
STRIKE
FURNISHED
FIELD REVERSIBLE
LATCHBOLT
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLATCHES DA-11
C
L
C
L
DIA.
L
C
L
C
L
C
L
C
L
C
L
C
CYLINDER
STRIKE
PLATE
LATCH
FACE
*STRIKE and Faceplate of ANSI
dimensions must be positioned
according to ANSI Spec.
HOW BACKSET
IS MEASURED:
29/32"
23mm
5/8"
15.9mm
1-17/64"
32.1mm
1-1/4"
31.8mm
1-3/16"
30.2mm
3/8"*
9.5mm
7/64"
2.8mm
8-1/64"
203.6mm
1-1/4"
31.8mm
1-3/16"
30.2mm
4-7/8"
123.8mm
3-3/8"
85.7mm
2-1/8"
54mm
1-1/4"
31.8mm
15/16"
23.8mm
1/4"
6.4mm
1-7/16"
36.5mm 8"
203.2mm
7-1/4"
184.2mm
19/32"
15.1mm
3/8"
9.5mm
1/4"
6.4mm
7-11/16"
195mm
5-13/16"
147.6mm
“A”
CYLINDER
STRIKE LATCH BACKSET
FLAT
BEVEL
SHOWN RH/LHR.
BOLT IS REVERSIBLE
FOR OPPOSITE HAND.
BACKSET MEASURED
AT CENTERLINE
OF DOOR EDGE
4920AN HEAVY DUTY DEADLATCH (ANSI SIZE)
Dimensions Jamb & Door Preparation
Latch Paddle & Cylinder
Installation
Nominal, subject to tolerance extremes
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Electric Strikes
Lock mounting accessories
and options.
4920AN Heavy Duty Deadlatches (ANSI Size) operable by
any standard 1-5/32" diameter mortise cylinder with MS® cam.
Entry trim, paddles, handles
and lever operators.
Application sepecific.
HOW TO ORDER 4920AN HEAVY DUTY DEADLATCH (ANSI SIZE)
Specify quantity and the following information. Order related products separately.
Product No. BACKSET HANDING STRIKE FACEPLATE FINISH
4920AN 4 6 -602 -313
4 1-1/2" 5 LH or RHR 000 Less Strike 313 Dark Bronze Anodized
5 2-3/4" 6 RH or LHR 602 4506 Strike 335 Black Anodized
628 Clear Anodized
BACKSET “A”
1-1/2"
38.1mm
2-9/64"
54.4mm
2-3/4"
69.9mm
3-25/64"
86.1mm
ARMORED FACEPLATE
1-1/4" X 8"
FLAT
24-0138-01-XXX
Flat faceplate can be
adjusted for right or left
beveled edge doors.
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Identical to MS1850SN Series
(See also prep for 4591 paddle).
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
DA-12 DEADLATCHES
OPTIONS & ACCESSORIES FOR DEADLATCHES
Options &
Accessories for
Deadlatches
Adams Rite Deadlatches can be ordered with a variety
of related products including strike plates, cylinder
accessories, electric strikes and trim. Different deadlatches
have different installation and cylinder requirements. Please
refer to product pages for more information on all available
deadlatch types, functions, installation requirements and
complete How-to-Order guides.
For more detailed information on any of the products listed
below please refer to the corresponding section of this catalog.
ACCESSORIES
4901, 4902 DEADLATCH STRIKES
4901, 4902 Deadlatch Strikes add aesthetics and finish to strike cutouts in
jambs. These strikes offer a choice of mounting methods: a backup mounting
plate included with the 4901 and 4902 allows installation flush in a hollow
section jamb. 4506-02 ANSI strike available for wood or steel jambs.
CYLINDERS
4036 MORTISE CYLINDER
The 4036 Mortise Cylinder is a standard 1" long, 1-5/32" diameter cylinder that
provides five-pin security with most Adams Rite locks or latches.
4066 THUMBTURN
The 4066 Thumbturn interchanges with standard 1-5/32" diameter mortise
cylinder and operates locks or latches without a key.
MS4043 CYLINDER GUARD
The MS4043 Cylinder Guard is a hardened-steel, free-swiveling ring to protect
cylinder from vandalism such as prying or twisting.
ELECTRIC STRIKES
7100, 7400 SERIES ELECTRIC STRIKES
The 7100 Series Electric Strikes and Ultraline 7400 Series Electric Strikes
are designed for use with Adams Rite deadlatches or cylindrical locksets with
a variety of latchbolt projections. An assortment of faceplate dimensions is
available for use in hollow metal, wood or aluminum applications.
POWER
4603 RECTIFIER
Converts low voltage AC current to DC of same voltage. Installs
in low voltage line between transformer and strike. Full wave
bridge type. Rated 2 Amps. (200 PIV).
4605 TRANSFORMER
Converts 120VAC to 12VAC/24VAC. Rated 40 Volt-amp output
assures plenty of power for strike release.
4606 TRANSFORMER
Converts 120VAC current to 24VAC. Plugs into standard
wall outlet.
29-0218 PIEZO HORN
Provides for audible indication of when a DC strike is energized.
Operates with 12 VDC, 16 VDC, or 24 VDC strikes.
4612 POWER TRANSFER DEVICE
The 4612 Power Transfer Device channels electrical wiring from
the door frame into the door itself. This powers electric strikes,
locks, exit bars, and more on door hung with butt-type hinges.
PS-1 POWER SUPPLY
One amp linear power supply with integrated battery backup
circuitry for access control devices.
TRIM
3080 SERIES ENTRY TRIM
The Grade 1 3080 Series Entry Trim provides outside activation
for doors with any type of Adams Rite deadlatch or exit device.
The locked handle is protected from vandalism and forced
entry with a breakaway clutching mechanism. For 4781 Two-
Point Deadlatch with Paddle the entry trim available must be
specified in the version used for CVR exit devices.
3090 KEYLESS ENTRY
A battery-operated keyless entry control device, the eForce-150
3090 Keyless Entry provides access control for Adams Rite
deadlocks, deadlatches, and exit devices for aluminum stile,
steel, and wood door applications.
The eForce 3090P (Prox) and 3090C (iCLASS) Keyless Entries
provide maximum security with either HID® Prox or iCLASS
contactless card reader.
DEADLATCH HANDLES
The 4560 and 4565 Deadlatch Handles and 4568 and 4569
Euro Deadlatch Handles easily unlock the 4300, 4500 and
4900 Series Deadlatches. These handles fit solidly into the
cylinder hole of the latch.
DEADLATCH PADDLES
The 4590, 4591 Deadlatch Paddle is an ergonomically-friendly
alternative to a knob or lever handle. Operate the 4300, 4500
and 4900 Series Deadlatches with a simple push or pull.
4600 HEAVY DUTY DEADLATCH HANDLE
The 4600 Heavy Duty Designer Deadlatch Handles are
designed with a patented adjustable drive mechanism to
operate the 4300, 4500, and 4900 Series Deadlatches.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLATCHES DA-13
Designed for greater key control, the 1870 Cylinder-
Operated Flushbolt for aluminum stile doors prevents
accidental locking of the inactive leaf of paired doors.
1870 Cylinder-
Operated Flushbolt
Function
Designed for use instead of conventional flip-lever operated flushbolts, the
1870 Cylinder-Operated Flushbolt gives building management key control of
the inactive leaf of paired doors. Prevents casual locking of the inactive leaf by
children or other unauthorized persons. Uses same basic over-center action
mechanism as MS® pivoted bolt deadlocks. Recommended for installation at
both top and bottom of inactive door with MS1850S Deadlock in active door for
greatest security. May be installed to lock at threshold or at header.
Operation
360° turn of key throws or retracts the hex-section bolt. Key
can be removed only when bolt is in a positively locked or
unlocked position. Accepts any standard 1-5/32" mortise
cylinder from either or both sides. Cylinder must have MS®
dimensioned cam (see CYLINDERS).
Specifications
CYLINDER BACKSET
• 31/32" or 1-1/8" only.
CYLINDER HEIGHT
• Standard length (cylinder center to retracted bolt tip) is
12" with ± 1-1/4" adjustment. Other lengths available by
special order.
CASE
• Measures 1" x 6" x depth. Depth varies by backset (see table
on back of page). Steel with corrosion-resistant plating.
BOLT
• Hexagonal 3/8" flat to flat, with 11/16" throw. Made of
stainless steel.
STRIKE
• 1/2" diameter hole in metal threshold or header
is suitable. For wood thresholds, 4005 strike is
available separately.
FACEPLATE
• Measures 1" x 6-7/8".
STANDARD PACKAGE
• Basic lock mechanism boxed with actuator arm attached,
rod/bolt assembly unattached. Stainless steel bolt guide,
mounting screws, and installation instructions included.
Cylinders available separately. Shipping weight: 1-1/4 lbs.
CYLINDER CAM
• 1870 Cylinder-Operated Flushbolts are operable
by any standard 1-5/32" diameter mortise cylinder
with MS® cam dimensioned as shown. Cylinders with
MS® cams can be readily obtained from most cylinder
manufacturers. See CYLINDERS section for cylinder
make, thumbturn and trim ring information.
1870 CYLINDER-OPERATED FLUSHBOLT
ALUMINUM
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
FLUSHBOLTS & PIVOTS FP-1
7/8"
22.2mm
1-11/32"
34.1mm
6"
152.4mm
6-3/8"
161.9mm
6-7/8"
174.6mm
1/4"
6.4mm
12" *
304.8mm
11/16"
17.5mm
1"
25.4mm
“A”
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
THROW
FOR SECURITY,
INSTALL
BOLT GUIDE
FROM INTERIOR
OF DOOR
NOTE:
MACHINE
SCREWS
ARE
FURNISHED
1-1/64"
25.8mm
6-57/64"
175mm
12"
304.8mm
9/16"
14.3mm
11/16"
17.5mm
37/64"
14.7mm
7/8"
22.2mm
1/2"
12.7mm
DIA.
1-1/4"
31.8mm
DIA.
1-19/32"
40.5mm
5/32"
4mm R
DRILL & CSK
FOR #10-32
FLAT HEAD
SCREWS
STILE
BOLT
THRESHOLD
(4 PLCS)
HOW BACKSET
IS MEASURED:
CYLINDER
FLAT
RADIUS
BEVEL
*STANDARD
LENGTH,
OTHER LENGTHS
AVAILABLE ON
SPECIAL ORDER
1870 CYLINDER-OPERATED FLUSHBOLT
BACKSET “A”
31/32"
24.6mm
1-5/8"
41.3mm
1-1/8"
28.6mm
1-25/32"
45.2mm
HOW TO ORDER 1870 CYLINDER-OPERATED FLUSHBOLT
Specify quantity and the following information. Order related products separately.
Product No. FACEPLATE shape BACKSET HANDING FINISH
187 0-2 0-628
0 Flat 2 31/32" 0 Non-Handed* 313 Dark Bronze Anodized
1 Radius 3 1-1/8" 5 LH or RHR 335 Black Anodized
1W Radius with weatherstrip 6 RH or LHR 628 Clear Anodized
2 Bevel
*Any flat or radius faceplate.
ARMORED FACEPLATE
1" X 6-7/8"
FLAT 1870
RADIUS 1871
RADIUS W/ WEATHERSTRIP
1871W
LH BEVEL 1872-X5
RH BEVEL 1872-X6
DimensionsDimensions Stile Preparation
Lock & Cylinder
Installation
For installation locking threshold.
Invert for header locking.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Special Order Options
Lock mounting accessories and options. 1870 Cylinder-Operated Flushbolts are operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam.
Other cylinder lengths
available as special order.
FP-2 FLUSHBOLTS & PIVOTS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Designed for greater key control, the 1870HM Cylinder-
Operated Flushbolt prevents accidental locking of the
inactive leaf of paired hollow metal doors. May be installed
to lock at threshold or at header.
1870HM Cylinder-
Operated Flushbolt
Function
Designed for use instead of conventional flip-lever operated flushbolts, the 1870HM
Cylinder-Operated Flushbolt gives building management key control of the inactive
leaf of paired doors. Prevents casual locking of the inactive leaf by children or other
unauthorized persons. Uses same basic over-center action mechanism as MS®
pivoted bolt locks. Recommended for installation at both top and bottom of inactive
door with MS1850SN Deadlock in active door for greatest security. May be installed
to lock at threshold or at header.
Operation
360° turn of key throws or retracts the hex-section bolt. Key can
be removed only when bolt is in a positively locked or unlocked
position. Accepts any standard 1-5/32" mortise cylinder from
either or both sides. Cylinder must have MS® dimensioned cam
(see CYLINDERS).
Specifications
CYLINDER BACKSET
• 1-1/4" only.
CYLINDER HEIGHT
• Standard length (cylinder center to door end) is 13-1/2".
Other lengths available by special order.
CASE
• Measures 7/8" x 6" x 1-21/32". Steel with corrosion-
resistant plating.
BOLT
• Hexagonal 3/8" flat to flat, with 11/16" throw. Made of
stainless steel.
STRIKE
• 2-1/4" x 15/16" strike is supplied.
FACEPLATE.
• Faceplate measures 1" x 8".
STANDARD PACKAGE
• Basic lock mechanism boxed with actuator arm attached,
rod/bolt assembly unattached. Stainless steel bolt guide,
mounting screws, and installation instructions included.
Cylinders available separately. Shipping weight: 1-1/4 lbs.
CYLINDER CAM
• 1870HM Cylinder-Operated Flushbolts are operable by
any standard 1-5/32" diameter mortise cylinder with MS®
cam dimensioned as shown. Cylinders with MS® cams
can be readily obtained from most cylinder manufacturers.
See CYLINDERS section for cylinder make, thumbturn
and trim ring information.
1870HM CYLINDER-OPERATED FLUSHBOLT
HOLLOW
METAL
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
FLUSHBOLTS & PIVOTS FP-3
1-1/4"
31.8mm 1-1/4"
31.8mm
6-1/16"
154mm
1/4"
6.4mm
13-1/2" *
342.9mm
11/16"
17.5mm
5/8"
15.9mm
9"
228.6mm
1"
25.4mm
8"
203.2mm
1-29/32"
48.4mm
CYLINDER
HEIGHT
THROW BOLT PROJECTION
BOTTOM EDGE OF DOOR
EXTENDED
CYLINDER
HOW BACKSET
IS MEASURED:
FLAT
BEVEL
BACKSET
12-24 TAP
(2 PLCS)
*OTHER LENGTHS AVAILABLE ON SPECIAL ORDER
1-1/4"
31.8mm
2-1/8"
54mm
1-1/4"
31.8mm
DIA.
8-1/64"
203.6mm
7-1/4"
184.2mm
1/4"
6.4mm
1-1/4"
31.8mm
5/8"
15.9mm
13/16"
20.6mm
1-5/8"
41.3mm
3/4"
19.1mm
1/2"
12.7mm
3/8"
9.5mm
1-17/64"
32.1mm
DRILL & TAP PLATE
8-32 THREAD
(3 PLCS)
DRILL & TAP
8-32 THREAD
(2 PLCS)
DRILL 3/4" DIA.
CLEARANCE
HOLE IN
DOOR PLATE
BOLT GUIDE
BOLT
NOSE OF
DOOR DIA
8-32
FLAT HEAD
MACHINE
SCREWS (3)
1"
25.4
mm
1870HM CYLINDER-OPERATED FLUSHBOLT
ARMORED FACEPLATE
1" X 8"
Finish: US28 Satin Aluminum
(628) consult factory
about special finishes.
FLAT 1870HM
LH BEVEL 1872HM-5
RH BEVEL 1872HM-6
For installation locking threshold.
Invert for header locking.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Special Order Options
Lock mounting accessories and options. 1870HM Cylinder-Operated Flushbolts are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam.
Other cylinder lengths
available as special order.
HOW TO ORDER 1870HM CYLINDER-OPERATED FLUSHBOLT
Specify quantity and the following information. Order related products separately.
Product No. FACEPLATE SHAPE HANDING FINISH
187 0HM 5-628
0HM Flat 0 Non-Handed* 313 Dark Bronze Anodized
2HM Bevel 5 LH or RHR 335 Black Anodized
6 RH or LHR 628 Clear Anodized
*Any flat or radius faceplate.
Dimensions
Installation
Door Preparation
FP-4 FLUSHBOLTS & PIVOTS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Designed for greater key control, the 1877 Cylinder-
Operated Flushbolt prevents accidental locking of the
inactive leaf of paired wood doors. May be installed to lock
at threshold or at header.
1877 Cylinder-
Operated Flushbolt
Function
Designed for use instead of conventional flip-lever operated flushbolts, the 1877
Cylinder-Operated Flushbolt gives building management key control of the inactive
leaf of paired doors. Prevents casual locking of the inactive leaf by children or
other unauthorized persons. Uses same basic over-center action mechanism as
MS® pivoted bolt locks. Recommended for installation at both top and bottom of
inactive door with MS1837 in active door for greatest security. May be installed to
lock at threshold or header.
Operation
360° turn of key throws or retracts the hex-section bolt. Key
can be removed only when bolt is in a positively locked or
unlocked position. Accepts any standard 1-5/32" mortise
cylinder from either or both sides. Cylinder must have MS®
dimensioned cam (see CYLINDERS).
Specifications
CYLINDER BACKSET
• 1-1/4" only.
CYLINDER HEIGHT
• Standard length (cylinder center to door edge) is
13-1/2". Other lengths available by special order.
CASE
• Measures 1" x 6" x 1-29/32". Steel with corrosion-
resistant plating.
BOLT
• Hexagonal 3/8" flat to flat, with 11/16" throw.
Made of stainless steel.
STRIKE
• 2-1/4" x 15/16" strike is supplied.
ARMORED FACEPLATE
• 1-1/4" x 15-5/8". Standard Finish: US28 Clear
Anodized (628).
STANDARD PACKAGE
• Basic lock mechanism boxed with actuator arm
attached, rod/bolt assembly unattached. Stainless
steel bolt guide, mounting screws, and installation
instructions included. Cylinders available separately.
Shipping weight: 1-1/4 lbs.
CYLINDER CAM
• 1877 Cylinder-Operated Flushbolts are operable by
any standard 1-5/32" diameter mortise cylinder with
MS® cam dimensioned as shown. Cylinders with
MS® cams can be readily obtained from most cylinder
manufacturers. See CYLINDERS section for cylinder
make, thumbturn and trim ring information.
1877 CYLINDER-OPERATED FLUSHBOLT
WOOD
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
STRIKE
PLATE
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
FLUSHBOLTS & PIVOTS FP-5
STANDARD
CYLINDER
HEIGHT
BOLT GUIDE
BOLT GUIDE
BOLT
PROJECTION
BOTTOM EDGE OF DOOR
#8-32 X 1/4˝
FLAT HEAD
MACHINE
SCREW (2)
(M4-0.8 X 6.0)
#12 X 1-1/4˝
FLAT HARD WOOD
SCREW
#12 X 3˝
FLAT HEAD
WOOD
SCREW
#6 X 3/4"
FLAT HEAD
WOOD
SCREWS (3)
(M3.5 X 19.0)
DIA.
DRILL & TAP
8-32 THREAD
(2 PLCS)
STRIKE
NOSE OF
DOOR
FACEPLATE
#8 X 1"
FLAT HEAD
WOOD
SCREWS (3)
(M4.0 X 25.0)
BOLT
GUIDE
DIA.
BACKSET
LOCK MTG
PLATE
1-1/4"
31.8mm
1/4"
6.4mm
1-29/32"
48.4mm
1"
25.4mm
1-1/4"
31.8mm
13-1/2"
342.9mm
15-5/8"
396.9mm
5/8"
15.9mm
3/4"
19.1mm
1"
25.4mm
3/4"
19.1mm
3-1/4"
82.6mm
1-5/8"
41.3mm
13/16"
20.6mm
5/8"
15.9mm
1-1/4"
31.8mm
3-3/8"
85.7mm
1/4"
6.4mm
1-1/4"
31.8mm
1/2"
12.7mm
2"
50.8mm
10-1/2"
266.7mm
1-1/4"
31.8mm
2-1/8"
54mm
1/8"
3.2mm
1/8"
3.2mm
7/8"
22.2mm
1"
25.4mm
1-1/4"
31.8mm
1877 CYLINDER-OPERATED FLUSHBOLT
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Special Order Options
Lock mounting accessories and options. 1877 Cylinder-Operated Flushbolts are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam.
Other cylinder lengths
available as special order.
HOW TO ORDER 1877 CYLINDER-OPERATED FLUSHBOLT
Specify quantity and the following information. Order related products separately.
Product No. Finish
1877 -628
313 Dark Bronze Anodized
605 Bright Brass
626 Satin Chrome
628 Clear Anodized
Dimensions Installation
For installation locking threshold.
Invert for header locking.
FP-6 FLUSHBOLTS & PIVOTS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
MS1880 and MS1881 Two-Point Flushbolts offer greater
convenience than flip-lever flushbolts. With one operation,
they provide security and reduce human error.
MS1880, MS1881
Two-Point Flushbolts
Function
Used instead of flip-lever flushbolts in the inactive leaf of paired doors, the
MS1880 and MS1881 offer greater convenience: one operation instead of two.
It also promotes security by removing an element of human error. A positive
blocking device makes it impossible to turn the key in the active door unless the
inactive leaf has first been secured. This two-point flushbolt must be installed in
conjunction with a pivoted bolt MS® deadlock. Cannot be unlocked whe pivoted
bolt is in locked position. Not to be used as a standalone locking mechanism.
Operation
Turn knob or lever 180° clockwise to throw hardened steel bolts
into header and threshold and clear strike opening so pivoted
MS® bolt can enter from active door. Counterclockwise turn
retracts vertical bolts and blocks entry of pivoted bolt.
Operates in conjunction with any MS® pivoting deadlock.
Specifications
TURN HEIGHT
• Matches cylinder height of MS® lock in active door.
TURN/INDICATOR
• MS1880 has an hourglass shape for firmer finger grip.
Finish is US26D Satin Chrome (682). Red background
indicator has aluminum letters reading “LOCKED˝
(no message shown when unlocked). MS1881 has a
teardrop shape lever with red letters on clear decal
indicating unlock direction only.
TOP AND BOTTOM BOLTS
• Hexagonal 3/8" flat to flat. Stainless steel. Guides
furnished. Bolt throw is 23/32". Strike required in metal
headers and thresholds is 1/2" diameter hole. For wood
installation, two 4005 strikes required are available
separately.
INTERLOCK
• All steel mechanism includes device to prevent entry of
pivoted bolt until vertical bolts are locked and conversely, to
prevent unlocking of vertical bolts when pivoted bolt is locked.
OPTIONS
• For wood header or threshold order 4005 Strikes
separately. For doors over 84" up to 120" Tall Door Kit
TDK-1880 available separately.
STANDARD PACKAGE
• Individually boxed with bolt guides and screws. Shipping
weight: 2 lbs.
MS1880, MS1881 TWO-POINT FLUSHBOLTS
MS1880
MS1881
ALUMINUM
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
FLUSHBOLTS & PIVOTS FP-7
THROW
FACE OF
STILE
DRILL & CSK
FOR #10-32
FLATHEAD SCREW
(4 PLCS)
CYLINDER
(2 PLCS)
(2 PLCS)
ON ACTIVE
DOOR LEAF
DIA.
DIA.
DIA.
23/32"
18.3mm
23/32"
18.3mm
3/4"
19.1mm
15/16"
23.8mm
8-1/8"
206.4mm
8-1/8"
206.4mm
1-1/16"
27mm
7/8"
22.2mm
9/64"
3.6mm
3/4"
19.1mm
1/2"
12.7mm
11/16"
17.5mm
(2 PLCS)
(2 PLCS)
9/16"
14.3mm
15/16"
23.8mm
1-1/16"
27mm
15/16"
23.8mm
1-1/2"
38.1mm
THROW
TOP GUIDE
BRACKET
BOTTOM
GUIDE
BRACKET
MS1880, MS1881 TWO-POINT FLUSHBOLTS
HOW TO ORDER MS1880, MS1881 TWO-POINT FLUSHBOLTS
Specify quantity and the following information. Order related products separately.
MODEL TURN SHAPE CYLINDER HEIGHT* FINISH
MS18 80 -01 -682
MS18 80 Hourglass 01 31" to 35" 119 Black
81 Teardrop 02 35-1/16" to 39" 121 Dark Bronze
03 39-1/16" 43" 682 Satin Chrome
04 43-1/16" to 47"
05 47-1/16" to 51"
*Distance from floor to cylinder centerline
Dimensions
MS1880
MS1881
Stile Preparation
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related
products, available separately:
This product is compatible with the following products:
Accessories Deadlocks
TDK-1880 Tall Door Kit. MS1850S, MS1850S-050, MS1850SN, MS1850SN-050, 1850S-020 (shortbolt), MS1950
FP-8 FLUSHBOLTS & PIVOTS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The MS2180 Auto-Release Two-Point Flushbolt works
in conjunction with any MS pivoting deadlock to provide
maximum security for paired doors.
MS2180 Auto-Release
Two-Point Flushbolt
Function
Used instead of code-violating manual (flip-lever) flushbolts in the inactive leaf
of paired doors. One turn pins the inactive leaf in position. The pivoting MS®
deadlock in the active leaf secures the entire opening. The action of securing
the MS® deadlock trips an internal mechanism in the MS2180 so that when the
MS® deadlock is retracted, the entire opening releases with only one operation.
This auto-release two-point flushbolt must be installed with a pivoted bolt MS®
deadlock. Not to be used as a standalone locking mechanism.
Operation
Turn knob or lever 120° counterclockwise to throw stainless
steel bolts into header and threshold and clear strike opening
so pivoted MS® bolt can enter from active door. Clockwise turn
retracts vertical bolts and blocks entry of pivoted bolt.
Operates in conjunction with any MS® pivoting deadlock.
Specifications
TURN HEIGHT
• Matches cylinder height of MS® deadlock in active door,
adjustable from 34" to 48".
TURN LEVER/INDICATOR
• MS2180 has an hourglass shape for a firm finger grip. Red
lettered indicator shows “LOCKED˝ when secure. MS2181
has a teardrop shaped turn lever. MS2182 is a limited-access
flush turn to comply with IBC requirements for “no doorknob˝
actuation. MS2182 is supplied with an activation tool.
TOP AND BOTTOM BOLTS
• Hexagonal 3/8" flat to flat. Stainless steel. Guides furnished.
Bolt throw is 23/32". Strike required in metal headers and
thresholds is 1/2" diameter hole. For wood installation, two
4005 strikes required are available separately.
INTERLOCK
• Mechanism includes device to prevent entry of pivoted bolt
until vertical bolts are locked and conversely, to prevent
unlocking of vertical bolts when pivoted bolt is locked.
MONITORING
• Monitoring Kit available as add-on switch kit that signals
when the top and bottom bolts are fully projected and
the MS® deadlock is in the extended and locked position.
More than an easily defeated door position switch, the
MK-2180 Monitoring Kit provides a tamper-proof indication
of the door position and locked condition. Form C switch.
OPTIONS
• For wood header or threshold, 4005 strikes available separately.
STANDARD PACKAGE
• Individually boxed with bolt guides and screws.
Shipping weight: 2 lbs.
MS2180 AUTO-RELEASE TWO-POINT FLUSHBOLT
ALUMINUM
MS2181
TURN
LEVER
MS2180
MS2182
FLUSH-
OPERATOR
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
FLUSHBOLTS & PIVOTS FP-9
MS2180 AUTO-RELEASE TWO-POINT FLUSHBOLT
HOW TO ORDER MS2180 AUTO-RELEASE TWO POINT FLUSHBOLT
Specify quantity and the following information. Order related products separately.
Product no. TURN SHAPE DOOR HEIGHT
(From floor to top of door) FINISH TO MATCH
MS218 0-07 -130
0 Hourglass 07 Up to 7' Door 119 Black Anodized
1 Teardrop 08 Up to 8' Door 121 Dark Bronze Anodized
2 Flush 09 Up to 9' Door 130 Clear Anodized
10 Up to 10' Door
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related
products, available separately:
This product is compatible with the following products:
Accessories Deadlocks
MK2180 Monitoring Kit. MS1850S, MS1850S-050, MS1850SN, MS1850SN-050, 1850S-020 (shortbolt), MS1950
DimensionsDimensions Stile Preparation
BOTTOM GUIDE
BRACKET
TOP GUIDE
BRACKET
DRILL &
CSK FOR
#6-32
FLAT HEAD
SCREW
(3 PLCS)
DRILL &
CSK FOR
#10-32
FLAT HEAD
SCREW
(4 PLCS)
THROW
THROW
C
L
(2 PLCS)
(2 PLCS)
23/32"
18.3mm
3/4"
19.1mm
6-7/8"
174.6mm
1"
25.4mm
1-1/2"
38.1mm 1-1/4"
31.8mm
7/8"
22.2mm
57/64"
22.6mm
1/2"
12.7mm
3/4"
19.1mm
3/4"
19.1mm
57/64"
22.6mm
57/64"
22.6mm
7/8"
22.2mm
9/16"
14.3mm
39/64"
15.5mm
2-11/16"
68.3mm
27/32"
21.4mm
23/32"
18.3mm
FACE OF
STILE
OF CYLINDER
ON ACTIVE
DOOR LEAF
FP-10 FLUSHBOLTS & PIVOTS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The B1921 and B1923 Reinforcing Pivots provide
an economical way to transfer load from hinges of
sagging doors.
B1921, B1923
Reinforcing Pivots
Function
This full-surface reinforcing pivot adds years of life to openings where the hinges
or hinge reinforcements have failed. Reinforcing pivots take the load off the
top hinge and transfer it to screws that are in shear so they will not pull off. The
economical way to solve door sag problems.
Specifications
TYPE
• Full surface reinforcing pivots for flush doors.
FINISH
• Zinc plating over steel.
MATERIAL
• Heavy-duty 3/16" cold-rolled steel.
CYCLE TESTING
• 1,500,000 repetitions
CAPACITY
• Supports weights up to 300 lbs.
HOLE PATTERN
• Symmetrically located. Non-handed.
HINGE SIZE
• The B1921 pivot is designed with 1/2" offset to match the
pivot point of a 4" wide butt hinge.
• The B1923 pivot is designed with a 3/4" offset to match
the pivot point of a 4-1/2" wide butt hinge.
STANDARD PACKAGE
• Comes complete with all necessary fasteners. Optional
tamper-proof screw available.
B1921, B1923 REINFORCING PIVOTS
WOOD HOLLOW
METAL
B1921 (4" HINGE
APPLICATIONS)
B1923 (4-1/2" HINGE
APPLICATIONS)
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
FLUSHBOLTS & PIVOTS FP-11
B1921, B1923 REINFORCING PIVOTS
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories
Tamper proof screws.
B-133 Large Oilite bronze bushing.
P-133 Large socket head pin and washer.
HOW TO ORDER B1921, B1923 REINFORCING PIVOTS
Specify quantity and the following information. Order related products separately.
Product no. MODEL
B192 1
1 4"
3 4-1/2"
Dimensions
DOOR PIVOT
PIVOT BOLT
& LOCK WASHER
RIGHT HAND
PIVOT BUSHING
LEFT HAND
PIVOT BUSHING
1/8"
3.2mm
1/8"
3.2mm
1/8"
3.2mm
1/8"
3.2mm
3/4"
19.1mm
1/2"
12.7mm
MIN. CLEAR
FRAME PIVOT
MIN. CLEAR
MATCHES 4" HINGE BARREL CENTERLINE
MATCHES 4-1/2" HINGE BARREL CENTERLINE
Dimensions Installation
B1921
B1923
B1921/B1923 Pivot Assembly
side view
side view
FP-12 FLUSHBOLTS & PIVOTS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Adams Rite Flushbolts can be ordered with a variety of
related products including strike plates, trim and cylinder
accessories and compatible products such as Adams Rite
deadlocks. Please see product pages for more information
on all available flushbolt types, functions, installation
requirements and complete How-to-Order guides.
For more detailed information on any of the products
listed below please refer to the corresponding section
of this catalog.
Options &
Accessories
for Flushbolts
Accessories
4000 SERIES MS DEADLOCK STRIKES
4000 surface mounted strike plate, 4001 strike plate with dust box, 4005 threshold
strike, 4006 floor strike, or 4505 armored strike add aesthetics and finish to strike
cutouts in jambs.
8650 CYLINDER ESCUTCHEON
If key entry operation is required for 4781 Two-Point Deadlatch with Paddle, any
standard mortise cylinder with MS cam can be installed outside through an 8650
Cylinder Escutcheon.
Deadlocks
MS1880, MS1881 Two-Point Flushbolts and MS2180 Auto-Release Two-Point
Flushbolt MUST be installed in conjunction with a pivoted bolt MS deadlock. See
DEADLOCKS section of this catalog for information on all available types and
functions including complete How-to-Order guides for Adams Rite Deadlocks
including the MS® Maximum Security Deadlocks.
Cylinders
4036 MORTISE CYLINDER
The 4036 Mortise Cylinder is a standard 1" long, 1-5/32" diameter cylinder that
provides five-pin security with most Adams Rite locks or latches.
4066 THUMBTURN
The 4066 Thumbturn interchanges with standard 1-5/32" diameter mortise cylinder
and operates locks or latches without a key.
MS4043 CYLINDER GUARD
The MS4043 Cylinder Guard is a hardened-steel, free-swiveling ring to protect
cylinder from vandalism such as prying or twisting.
OPTIONS & ACCESSORIES FOR FLUSHBOLTS
FLUSHBOLTS & PIVOTS FP-13
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
3100 Series (Fire-Rated)
8100 Series (Life-Safety)
Surface Vertical Rod
Exit Device
Features
• Patented top latching mechanism interlocks door to frame
• Strong, durable construction for a high level of security
• Adjustable steel rods protected in contoured covers
• Easy to install
• Clean, unobtrusive design
• Pushbar clad or anodized, not plated, in a variety of finishes
• Also available in top rod only version
Specifications
3100 SERIES CERTIFICATIONS:
• UL Panic-Fire Exit Hardware, up to 3 hrs
• UL 305 Panic Hardware
• California State Fire Marshall
• New York City MEA*
• Warnock/Hersey Listing
8100 SERIES CERTIFICATIONS:
• UL 305 Panic Hardware
• ANSI/BHMA A156.3 Grade 1
• California State Fire Marshall
• New York City MEA*
*Consult Factory for specific number
MATERIALS
• Pushbar made of extruded aluminum, clad or anodized in a
variety of finishes.
HANDING
• Device is non-handed. Lever Entry Trim is field reversible.
PUSHBAR LENGTH
• Standard sizes: dimensioned for 30", 36", 42", and 48"
openings. Standard width bars can be field cut to the next
smallest opening width.
BAR HEIGHT
• Standard model adjusts from 30" to 44".
DOOR HEIGHT
• Standard model fits up to 8 ft door, with bar height at 40"–
44". For doors up to 10 ft. Tall Door Kit available separately:
8055 Tall Door Kit for 8100 or 3055 Tall Door Kit for 3100.
DOOR THICKNESS
• Suits 1-3/4" standard, up to 2-1/4".
STILE WIDTH
• 3100 – Minimum 3-3/4". Door construction may require
additional stile width to meet fire ratings and provide
adequate strength.
• 8100 – Minimum 3-3/4".
3100 SERIES (FIRE-RATED)
8100 SERIES (LIFE-SAFETY)
SURFACE VERTICAL ROD EXIT DEVICE
3100 SERIES (FIRE-RATED)
8100 SERIES (LIFE-SAFETY)
SURFACE VERTICAL ROD EXIT DEVICE
3100 SERIES
MODEL TYPE FIRE
RATING
DOOR
CONSTRUCTION
MAX SIZE
SINGLE
DOORS
MAX SIZE PAIRS
& DOUBLE
EGRESS
3100 SVR 3 Hr Hollow metal or wood 4’0” x 8’0” 8’0” x 8’0”
3100W SVR-TRO
20 Min with
hose stream
45 Min wood
or plastic
covered
Wood 4´0" x 8´0" 8´0" x 8´0"
3100T SVR-TRO 1-1/2 Hr Hollow metal 4’0” x 8’0” 8’0” x 8’0”
HOLLOW
METAL
WOOD ELECTRIFIED
OPTION
FIRE RATEDGRADE
PROJECTION
• 2-15/16" when fully projected, 1-15/16"when dogged.
DOGGING
• Standard dogging with hex key or optional cylinder dogging for 8100 Series
only. Electric dogging also available for 3100 and 8100 Series.
FASTENERS
• Standard self-tapping screws. Optional Sex Bolt Kits 26-0584 (two required
per device). Specify finish.
CYLINDERS
• See CYLINDERS section of this catalog for cylinder make, thumbturn and trim
ring information. (Available separately).
CYLINDER X FIXED PULL (ANSI/BHMA FUNCTION 03)
• Accepts any standard Rim cylinder.
3080 ENTRY TRIM (FUNCTIONS 08, 09)
• Accepts any standard diameter Mortise cylinder with MS® cam.
Accommodates cylinder lengths from 1" to 1-1/4". (Available separately).
WARRANTY
• Five year limited.
Bolts and Strikes
• The patented top latching mechanism utilizes a rotating top bolt which
deadlatches around the header strike, interlocking the door to the frame. For
wood frames, an additional plate is supplied for securing the header strike.
The hexagonal, hardened steel bottom bolt is shielded in a cast housing for
strength and stability.
Top Rod Only
• The surface vertical rod exit device is also available with a single vertical rod
on top. Specify by adding “T" after exit device number.
TOP
BOLT
BOTTOM
BOLT
TOP
STRIKE
TOP ROD ONLY
PLATE FOR WOOD
FRAMES IS FURNISHED
WITH 8100
TOP
BOLT
BOTTOM
BOLT
REVERSE VIEW
TOP
STRIKE
TOP ROD ONLY
PLATE FOR WOOD
FRAMES IS FURNISHED
WITH 8100
3100 SERIES ONLY
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
EXIT DEVICES ED-1
3100 SERIES (FIRE-RATED)
8100 SERIES (LIFE-SAFETY)
SURFACE VERTICAL ROD EXIT DEVICE
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation for quiet
environments such as hospitals, offices, hotels, and libraries where solenoid-driven
devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The LR option uses a solenoid mounted in the pushbar for instantaneous unlocking
and locking of the exit device from a remote location or access control device. LR
option is not available on rim type exit devices (see EL option).
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify management
of unauthorized exit. Available on minimum opening width 36". Cannot be ordered
with other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be used to
activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the latch
retracted for lower profile exit devices, resulting in less damage and quieter
operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable that the end
caps match the finish of the exit device. Available for US finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above please see the
Accessories page of the EXIT DEVICE section of this catalog.
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no outside
operation
No outside operation –
pull only when dogged
Night latch – key
retracts latch
Key outside unlocks/
locks lever
Night latch – key unlocks trim,
trim retracts latch/trim relocks
when key is removed
Passage only
Cylinder Type
N/A N/A Rim Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
Optional Sex Bolt Kits 26-0584 (two per device).
Tall Door Kit: 8055 for 8100 or 3055 for 3100
REX-Monitor/Signal Kits.
Adams Rite exit devices are operable
by either rim or mortise cylinders
depending upon the ANSI/BHMA
functions of the exit device.
Entry trim and fixed pulls. PS-SE, PS-LR, and 4612
Power Transfer Device.
HOW TO ORDER 3100 SERIES (FIRE-RATED) 8100 SERIES (LIFE-SAFETY) SURFACE VERTICAL ROD EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING
OPTION
DOOR OPENING WIDTH
On pair of doors, specify HALF
of the total exit opening
US FINISH END CAPS
OPTION
81 00 -SE M2 -30 -US32D MEC
31 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching
End Caps
81 Life-Safety 11 Clear Anodized 628 W Top Rod only -
Wood doors
SE Silent Electrification Latch
Retraction M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze Anodized 313 - Standard rod C Cylinder Dogging (non-fire
rated devices ONLY)
(Blank)
No Monitor 40 40 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option AXXB Alarmed Exit Device
where XX is door
opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
EXIT DEVICES
ED-2
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
8200 Series (Life-Safety)
Narrow Stile
Surface Vertical
Rod Exit Device
Specifications
8200 SERIES CERTIFICATIONS:
• UL 305 Panic Hardware
• Warnock/Hersey Life-Safety Listing
• ANSI/BHMA A156.3 Grade 1
• California State Fire Marshall
• New York City MEA*
*Consult Factory for specific number
MATERIALS
• Pushbar made of extruded aluminum, clad or anodized in a
variety of finishes.
HANDING
• Device is non-handed. Lever Entry Trim is field reversible.
PUSHBAR LENGTH
• Standard sizes: dimensioned for 30", 36", 42", and 48"
openings. Standard width bars can be field cut to the next
smallest opening width.
BAR HEIGHT
• Standard model adjusts from 30" to 44".
DOOR HEIGHT
• Standard model fits up to 8 ft door, with bar height at
40"- 44". For doors up to 10 ft, use Tall Door Kit 8055.
DOOR THICKNESS
• Suits 1-3/4" standard, up to 2-1/4".
STILE WIDTH
• Minimum 2" stile. Fits narrow, medium, and wide stile
aluminum doors.
PROJECTION
• 2-15/16" when fully projected, 1-15/16" when dogged.
DOGGING
• Standard dogging with hex key or cylinder dogging option.
Electric dogging also available.
FASTENERS
• Standard self-tapping screws.
CYLINDERS
• See CYLINDERS section of this catalog for cylinder make,
thumbturn and trim ring information. (Available separately).
CYLINDER X FIXED PULL (FUNCTION 03)
• Accepts any standard rim cylinder.
3080 ENTRY TRIM (FUNCTIONS 08, 09)
• Accepts any standard diameter mortise cylinder with
MS® cam. Accommodates cylinder lengths from 1" to 1-1/4".
(Available separately).
WARRANTY
• Five year limited.
8200 SERIES (LIFE-SAFETY)
NARROW STILE SURFACE
VERTICAL ROD EXIT DEVICE
ELECTRIFIED
OPTION
ALUMINUM GRADE
Features
• Patented top latching mechanism interlocks door to frame
• Strong, durable construction for a high level of security
• Adjustable steel rods protected in contoured covers
• Easy to install
• Clean, unobtrusive design
• Pushbar clad or anodized, not plated, in a variety of finishes
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
EXIT DEVICES ED-3
8200 SERIES (LIFE-SAFETY)
NARROW STILE SURFACE
VERTICAL ROD EXIT DEVICE
Bolts and Strikes
• The patented top latching
mechanism utilizes a rotating top
bolt which deadlatches around
the header strike, interlocking
the door to the frame. Supplied
with standard header strike. The
hexagonal, hardened steel bottom
bolt is shielded in a cast housing
for strength and stability.
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation
for quiet environments such as hospitals, offices, hotels, and libraries
where solenoid-driven devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The LR option uses a solenoid mounted in the pushbar for instantaneous
unlocking and locking of the exit device from a remote location or access
control device. LR option is not available on rim type exit devices
(see EL option).
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify
management of unauthorized exit. Available on minimum opening width
36". Cannot be ordered with other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be
used to activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit
devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the
latch retracted for lower profile exit devices, resulting in less damage and
quieter operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable
that the end caps match the finish of the exit device. Available for US
Finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above
please see the Accessories page of the EXIT DEVICE section of this catalog.
BOTTOM BOLT
TOP
STRIKE
TOP
BOLT
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no outside
operation
No outside operation –
pull only when dogged
Night latch – key
retracts latch
Key outside unlocks/
locks lever
Night latch - key unlocks trim,
trim retracts latch/trim relocks
when key is removed
Passage only
Cylinder Type
N/A N/A Rim Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits.
Tall Door Kit 8055.
Adams Rite exit devices are operable by either rim or
mortise cylinders depending upon the ANSI/BHMA
functions of the exit device.
Entry trim and fixed pulls. PS-SE, PS-LR, and 4612
Power Transfer Device.
HOW TO ORDER 8200 SERIES (LIFE-SAFETY) NARROW STILE SURFACE VERTICAL ROD EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING
OPTION
DOOR OPENING WIDTH
On pair of doors, specify HALF of
the total exit opening
US FINISH END CAPS
OPTION
82 00 -ED M2 -36 -US3
82 Life-Safety 00 US Finish T Top Rod only LR Electric Latch
Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching
End Caps
11 Clear Anodized 628 - Standard rod SE Silent Electrification
Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Option 40 40 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option AXXB Alarmed Exit Device
where XX is door
opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
ED-4 EXIT DEVICES
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
3300 Series (Fire-Rated)
8300 Series (Life-Safety)
Mortise Exit Device
Features
• Heavy duty deadlatching mechanism
• Strong, durable construction for a high level of security
• Easy to install
• Clean, unobtrusive design
• Pushbar clad or anodized, not plated, in a variety of finishes
Specifications
3300 SERIES CERTIFICATIONS:
• UL Panic-Fire Exit Hardware, 3-Hour Fire Label
• UL 305 Panic Hardware
• California State Fire Marshall
• New York City MEA*
• Warnock/Hersey Listing
8300 SERIES CERTIFICATIONS:
• UL 305 Panic Hardware
• ANSI/BHMA A156.3 Grade 1
• California State Fire Marshall
• New York City MEA*
*Consult Factory for specific number
MATERIALS
• Pushbar made of extruded aluminum, clad, or anodized
in a variety of finishes.
HANDING
• Specify handing and bevel if applicable. Lever Entry Trim
is field reversible.
PUSHBAR LENGTH
• Standard sizes: dimensioned for 30", 36", 42", and 48"
openings. Standard width bars can be field cut to the
next smallest opening width.
DOOR THICKNESS
• Suits 1-3/4" standard. Can be modified for thicker doors.
STILE WIDTH
• 3300 – Minimum 5". Door construction may require
additional stile width to meet fire ratings and provide
adequate strength.
• 8300 – Minimum 5".
PROJECTION
• 2-5/8" when fully projected, 1-5/8"when dogged.
DOGGING
• Standard dogging with hex key or cylinder dogging for
8300 Series only. Electric dogging also available for
3300 and 8300 Series.
FASTENERS
• Standard self-tapping screws. Optional Sex Bolt Kits 26-
0584 (two required per device). Specify finish.
3300 SERIES (FIRE-RATED)
8300 SERIES (LIFE-SAFETY)
MORTISE EXIT DEVICE
3300 SERIES (FIRE-RATED)
8300 SERIES (LIFE-SAFETY)
MORTISE EXIT DEVICE
STRIKES
• Made of stainless steel. Supplied with exit device. See
additional information below.
CYLINDERS
• See CYLINDERS section of this catalog for cylinder make,
thumbturn and trim ring information. (Available separately).
CYLINDER X FIXED PULL (FUNCTION 03)
• Accepts any standard mortise cylinder with MS® cam.
3080 ENTRY TRIM (FUNCTIONS 08, 09)
• Accepts any standard diameter mortise cylinder with
MS cam. Accommodates cylinder lengths from 1" to 1-1/4".
(Available separately).
WARRANTY
• Five year limited.
3300 FIRE-RATED/8300 LIFE-SAFETY
• Heavy –duty deadlatch fits ANSI A115.1 standard door
and jamb prep. 2-3/4" backset.
Strikes
• A variety of strikes are available for different conditions
and applications.
• Standard strike (included).
• Extended Lip 8360-XX (available separately).
• Open Back 4009-01 (available separately).
Thick Door Kits (8300 Only)
• 91-0995-02* - 2" Thick Door Kit
• 91-0995-03* - 2-1/4" Thick Door Kit
• 91-0995-04* - 2-1/2" Thick Door Kit
• 91-0995-05* - 2-3/4" Thick Door Kit
• 91-0995-06* - 3" Thick Door Kit
*Order 8360-XX Long Lip Strike as required.
STANDARD
STRIKE
8360-01
OPEN
BACK
4009-01
EXTENDED LIP
8360-XX
“A” SPECIFIC
DIM. “A”
1"
HOLLOW
METAL
WOOD ELECTRIFIED
OPTION
FIRE RATEDGRADE
STANDARD
STRIKE
8360-01
OPEN
BACK
4009-01
EXTENDED LIP
8360-XX
“A” SPECIFIC
DIM. “A”
1"
3300 SERIES
MODEL TYPE FIRE
RATING
DOOR
CONSTRUCTION
MAX SIZE
SINGLE DOORS
MAX SIZE
PAIRS & DOUBLE
EGRESS
3300 Single Point
Mortise 3 Hr Hollow metal or
wood 4´0" x 8´0" 8´0" x 8´0"*
*May be used with 3100 or 3600 Series with an open back strike.
3300 SERIES ONLY
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
EXIT DEVICES ED-5
3300 SERIES (FIRE-RATED)
8300 SERIES (LIFE-SAFETY)
MORTISE EXIT DEVICE
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation for quiet
environments such as hospitals, offices, hotels, and libraries where solenoid-driven
devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The LR option uses a solenoid mounted in the pushbar for instantaneous unlocking
and locking of the exit device from a remote location or access control device. LR
option is not available on rim type exit devices (see EL option).
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify management
of unauthorized exit. Available on minimum opening width 36". Cannot be ordered
with other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be used to
activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the
latch retracted for lower profile exit devices, resulting in less damage and
quieter operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable that the end
caps match the finish of the exit device. Available for US finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above please see the
Accessories page of the EXIT DEVICE section of this catalog.
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no outside
operation
No outside operation –
pull only when dogged
Night latch – key
retracts latch
Key outside unlocks/
locks lever
Key unlocks trim, trim retracts latch/trim
relocks when key is removed
Passage only
Cylinder Type
N/A N/A Mortise Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits.
Optional Sex Bolt Kits 26-0584 (two required
per device).
Thick Door Kits, Extended Lip Strike 8360-XX,
and Open Back Strike 4009-01.
Adams Rite exit devices are operable
by either rim or mortise cylinders
depending upon the ANSI/BHMA
functions of the exit device.
Entry trim and fixed pulls. PS-SE, PS-LR, and 4612
Power Transfer Device.
HOW TO ORDER 3100 SERIES (FIRE-RATED) 8100 SERIES (LIFE-SAFETY) SURFACE VERTICAL ROD EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL FACEPL ATE
FINISH
FACE
SHAPE DEVICE OPTIONS MONITORING
OPTION
DOOR
HANDING
PUSHBAR
FINISH
DOOR OPENING
WIDTH
On pair of doors, specify
HALF of the total exit
opening
US FINISH END CAPS
OPTION
83 3 0 ED M-7 3A36B
33 Fire Rated 0 US Finish 0 Flat
(3300 only)
LR Electric Latch
Retraction M Single Switch 7 RHR 0 US Finish 30 30 inches US3 Bright Brass MEC Matching
End Caps
83 Life-Safety 1 Clear
Anodized 628
2 Bevel
(8300 only)
SE Silent Electrification
Latch Retraction M2 Dual Switch 8 LHR 1 Clear
Anodized 628 36 36 inches US4 Satin Brass
2 Dark Bronze
Anodized 313
C Cylinder Dogging
(non-fire rated
devices ON LY )
(Blank)
No Monitor
2 Dark Bronze
Anodized 313 40 40 inches US32 Bright
Stainless
3 Black
Anodized 335 ED Electric Dogging 3 Black
Anodized 335 48 48 inches US32D Satin
Stainless
- Without Options AXXB Alarmed Exit
Device where XX is door
opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
EXIT DEVICES
ED-6
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
8400 Series (Life-Safety)
Narrow Stile Mortise
Exit Device
MATERIALS
• Pushbar made of extruded aluminum, clad or anodized in
a variety of finishes.
HANDING
• Specify handing and bevel if applicable. Lever Entry Trim
is field reversible.
PUSHBAR LENGTH
• Standard sizes: dimensioned for 30", 36", 42", and 48"
openings. Standard width bars can be field cut to the next
smallest opening width.
BACKSET
• Backsets available in 31/32", 1-1/8", and 1-1/2".
DOOR THICKNESS
• Suits 1-3/4" standard. Can be modified for thicker doors.
STILE WIDTH
• Minimum 2" Stile. Fits narrow, medium, and wide stile
aluminum doors.
PROJECTION
• 2-5/8" when fully projected, 1-5/8"when dogged.
DOGGING
• Standard dogging with hex key or cylinder dogging option.
Electric dogging also available.
FASTENERS
• Standard self-tapping screws.
CYLINDERS
• See CYLINDERS section of this catalog for cylinder
make, thumbturn and trim ring information.
(Available separately).
CYLINDER X FIXED PULL (FUNCTION 03)
• Accepts any standard mortise cylinder with MS® cam.
3080 ENTRY TRIM (FUNCTIONS 08, 09)
• Accepts any standard diameter mortise cylinder with MS
cam. Accommodates cylinder lengths from 1" to 1-1/4".
(Available separately).
WARRANTY
• Five year limited.
Strikes
• Made of stainless steel. Standard Strike supplied with
exit device. A variety of strikes are available for different
applications and conditions.
Features
• Heavy duty deadlatching mechanism
• Strong, durable construction for a high level of security
• Easy to install
• Clean, unobtrusive design
• Pushbar clad or anodized, not plated, in a variety of finishes
• Fits standard cutout used for the Adams Rite MS® Deadlock on aluminum stile
glass doors.
Specifications
8400 SERIES CERTIFICATIONS:
• UL 305 Panic Hardware • California State Fire Marshall
• ANSI/BHMA A156.3 Grade 1 • New York City MEA*
*Consult Factory for specific number
8400 SERIES (LIFE-SAFETY)
NARROW STILE MORTISE EXIT DEVICE
ELECTRIFIED
OPTION
ALUMINUM GRADE
A VERIETY OF
STRIKES ARE
AVAILABLE FOR
DIFFERENT
APPLICATIONS
AND CONDITIONS.
STANDARD
STRIKE
(INCLUDED)
EXTENDED LIP
8460-17
(OPTIONAL)
LONGFACE
8455-01
(OPTIONAL)
When
Replacing
Deadbolt
Strike Prep
Specify
DIM. “A”
“A”
1"
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
EXIT DEVICES ED-7
8400 SERIES (LIFE-SAFETY)
NARROW STILE MORTISE EXIT DEVICE
Thick and Cladded Door Kits
• 91-0995-02* - 2" Thick Door Kit
• 91-0995-03* - 2-1/4" Thick Door Kit
• 91-0995-04* - 2-1/2" Thick Door Kit
• 91-0995-05* - 2-3/4" Thick Door Kit
• 91-0995-06* - 3" Thick Door Kit
• 91-0325-01 – Thermal Door Kit – 1/4" Cladding
• 91-0325-02 – Thermal Door Kit – 1/2" Cladding
*Order 8460-XX Long Lip Strike as required.
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation
for quiet environments such as hospitals, offices, hotels, and libraries
where solenoid-driven devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The LR option uses a solenoid mounted in the pushbar for instantaneous
unlocking and locking of the exit device from a remote location or access
control device. LR option is not available on rim type exit devices
(see EL option).
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify
management of unauthorized exit. Available on minimum opening width
36". Cannot be ordered with other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be
used to activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit
devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the
latch retracted for lower profile exit devices, resulting in less damage and
quieter operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable
that the end caps match the finish of the exit device. Available for US
finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above
please see the Accessories page of the EXIT DEVICE section of this catalog.
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no outside
operation
No outside operation –
pull only when dogged
Night latch – key
retracts latch
Key outside unlocks/
locks lever
Night latch - key unlocks trim,
trim retracts latch/trim relocks
when key is removed
Passage only
Cylinder Type
N/A N/A Mortise Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits.
Thick or Cladded Door Kits, 8360-
17 Extended Lip Strike, 8455-01
Longface, 8460-XX Long Lip Strike.
Adams Rite exit devices are operable by either
rim or mortise cylinders depending upon the
ANSI/BHMA functions of the exit device.
Entry trim and fixed pulls. PS-SE, PS-LR, and 4612
Power Transfer Device.
HOW TO ORDER 8400 SERIES (LIFE-SAFETY) NARROW STILE MORTISE EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL FACEPL ATE
FINISH FACE SHAPE DEVICE OPTIONS MONITORING
OPTION BACKSET DOOR
HANDING
PUSHBAR
FINISH
DOOR OPENING
WIDTH
On pair of doors,
specify HALF of the
total exit opening
US FINISH END CAPS
OPTION
84 1 4 SE M2 -4 7 1 40
84 Life-Safety 0 US Finish 0 Flat, Radius,
Bevel
LR Electric Latch
Retraction M Single Switch 2 31/32" 7 RHR 0 US Finish 30 30 inches US3
Bright Brass
MEC
Matching
End Caps
1 Clear
Anodized 628
4 Radius w/
Weatherstrip
SE Silent Electrification
Latch Retraction M2 Dual Switch 3 1-1/8" 8 LHR 1 Clear
Anodized 628 36 36 inches US4
Satin Brass
2 Dark Bronze
Anodized 313 C Cylinder Dogging (Blank)
No Monitor 4 1-1/2" 2 Dark Bronze
Anodized 313 40 40 inches US32
Bright Stainless
3 Black
Anodized 335 ED Electric Dogging 3 Black
Anodized 335 48 48 inches US32D
Satin Stainless
- Without Options
AXXB Alarmed Exit
Device where XX is
door opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
ED-8 EXIT DEVICES
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
3600 Series (Fire-Rated)
8500 Series (Life-Safety)
Metal Door
Concealed Vertical
Rod Exit Device
Features
• Patented top latching mechanism interlocks door to frame
• Strong, durable construction for a high level of security
• Adjustable steel rods protected in contoured covers
• Easy to install
• Clean, unobtrusive design
• Pushbar clad or anodized, not plated, in a variety
of finishes
• Also available in top rod only version
Specifications
3600 SERIES CERTIFICATIONS:
• UL Panic-Fire Exit Hardware, 3-Hour Fire Label
• California State Fire Marshall
• New York City MEA*
• Warnock/Hersey Listing
8500 SERIES CERTIFICATIONS:
• UL 305 Panic Hardware
• ANSI/BHMA A156.3 Grade 1
• California State Fire Marshall
• New York City MEA*
*Consult Factory for specific number
MATERIALS
• Pushbar made of extruded aluminum, clad or anodized in a
variety of finishes.
HANDING
• Device is non-handed. Lever Entry Trim is field reversible.
PUSHBAR LENGTH
• Standard sizes: dimensioned for 30", 36", 42", and 48"
openings. Standard width bars can be field cut to the
next smallest opening width.
DOOR HEIGHT
• Standard unit adjustable for doors up to 66" above the
selected bar height. For doors over 66" above bar height, up
to 10 ft use 3655 Tall Door Kit.
DOOR THICKNESS
• Suits 1-3/4" standard, up to 2-1/4".
STILE WIDTH
• 3600 – Minimum 3-1/2". Door construction may require
additional stile width to meet fire ratings and provide
adequate strength.
• 8500 – Minimum 3-1/2".
PROJECTION
• 2-5/8" when fully projected, 1-5/8"when dogged.
3600 SERIES (FIRE-RATED)
8500 SERIES (LIFE-SAFETY)
METAL DOOR CONCEALED
VERTICAL ROD EXIT DEVICE
3600 SERIES (FIRE-RATED)
8500 SERIES (LIFE-SAFETY)
METAL DOOR CONCEALED
VERTICAL ROD EXIT DEVICE
3600 SERIES
MODEL TYPE FIRE
RATING
DOOR
CONSTRUCTION
MAX SIZE
SINGLE DOORS
MAX SIZE PAIRS
& DOUBLE
EGRESS
3600 CVR 3 Hr Hollow metal N/A 8´0" x 8´0"
3600T CVR-TRO 1-1/2 Hr Hollow meta N/A 8´0" x 8´0"
HOLLOW
METAL
ELECTRIFIED
OPTION
FIRE RATEDGRADE
DOGGING
• Standard dogging with hex key or optional cylinder dogging for
8500 Series only. Electric dogging also available for 3600 and
8500 Series.
FASTENERS
• Standard self-tapping screws. Optional Sex Bolt Kits
26-0584 (two required per device). Specify finish.
CYLINDERS
• See CYLINDERS section of this catalog for cylinder make,
thumbturn and trim ring information.
(Available separately).
CYLINDER X FIXED PULL (FUNCTION 03)
• Accepts any standard mortise cylinder with MS® cam.
3080 ENTRY TRIM (FUNCTIONS 08, 09)
• Accepts any standard diameter mortise cylinder with MS® cam.
Accommodates cylinder lengths from 1" to 1-1/4".
(Available separately).
WARRANTY
• Five year limited.
Bolts and Strikes
• The patented top latching mechanism utilizes a rotating top
bolt which deadlatches around the header strike, interlocking
the door to the frame. Supplied with standard header strike.
The hexagonal, hardened steel bottom bolt is shielded in a
cast housing for strength and stability.
Top Rod Only
• The concealed vertical rod exit device is also available with
a single vertical rod on top. Specify by adding “T" after exit
device number.
TOP
BOLT
BOTTOM
BOLT
TOP
STRIKE
TOP ROD
ONLY
TOP
BOLT
BOTTOM
BOLT
TOP
STRIKE
TOP ROD
ONLY
3600 SERIES ONLY
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
EXIT DEVICES ED-9
3600 SERIES (FIRE-RATED)
8500 SERIES (LIFE-SAFETY)
METAL DOOR CONCEALED
VERTICAL ROD EXIT DEVICE
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation for quiet
environments such as hospitals, offices, hotels, and libraries where solenoid-driven
devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The LR option uses a solenoid mounted in the pushbar for instantaneous unlocking
and locking of the exit device from a remote location or access control device. LR
option is not available on rim type exit devices (see EL option).
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify management of
unauthorized exit. Available on minimum opening width 36". Cannot be ordered with
other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be used to
activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the latch retracted
for lower profile exit devices, resulting in less damage and quieter operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable that the end
caps match the finish of the exit device. Available for US finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above please see the
Accessories page of the EXIT DEVICE section of this catalog.
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no outside
operation
No outside operation –
pull only when dogged
Night latch – key
retracts latch
Key outside unlocks/
locks lever
Night latch - key unlocks trim,
trim retracts latch/trim relocks
when key is removed
Passage only
Cylinder Type
N/A N/A Mortise Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits.
Optional Sex Bolt Kits 26-0584 (two per device).
3655 Tall Door Kit.
Trim Function 03 (key retracts latch) requires 8650
Cylinder Escutcheon kit.
Adams Rite exit devices are operable
by either rim or mortise cylinders
depending upon the ANSI/BHMA
functions of the exit device.
Entry trim and fixed. PS-SE, PS-LR, and 4612
Power Transfer Device.
HOW TO ORDER 3600 SERIES (FIRE-RATED) 8500 SERIES (LIFE-SAFETY) METAL DOOR CONCEALED VERTICAL ROD EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING
OPTION
DOOR OPENING WIDTH
On pair of doors, specify HALF of the
total exit opening
US FINISH END CAPS
OPTION
85 00 TED M-36 -US32D
36 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching
End Caps
85 Life-Safety 11 Clear Anodized 628 - Standard rod SE Silent Electrification
Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze
Anodized 313
C Cylinder Dogging (non-fire
rated devices only)
(Blank)
No Monitor 40 40 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option AXXB Alarmed Exit Device
where XX is door opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
EXIT DEVICES
ED-10
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
8600 Series (Life-Safety)
Narrow Stile
Concealed Vertical
Rod Exit Device
MATERIALS
• Pushbar made of extruded aluminum, clad or anodized
in a variety of finishes.
HANDING
• Device is non-handed. Lever Entry Trim is field reversible.
PUSHBAR LENGTH
• Standard sizes: dimensioned for 30", 36", 42", and 48"
openings. Standard width bars can be field cut to the next
smallest opening width.
BAR HEIGHT
• Standard model adjusts from 30" to 44".
DOOR HEIGHT
• Standard unit adjustable for doors up to 66" above the
selected bar height. For doors over 66" above bar height,
up to 10 ft use 8655 Tall Door Kit.
DOOR THICKNESS
• Suits 1-3/4" standard, up to 2-1/4". Device requires
modification when used with cylinder in doors over 1-3/4".
STILE WIDTH
• Minimum 2" Stile. Fits narrow, medium, and wide stile
aluminum doors.
STILE WALL
• Doors with stile walls other than 1/8" require modification.
PROJECTION
• 2-5/8" when fully projected, 1-5/8"when dogged.
DOGGING
• Standard dogging with hex key or cylinder dogging option.
Electric dogging also available.
FASTENERS
• Standard self-tapping screws.
CYLINDERS
• See CYLINDERS section of this catalog for cylinder
make, thumbturn and trim ring information.
(Available separately).
CYLINDER X FIXED PULL (FUNCTION 03)
• Accepts any standard mortise cylinder with MS® cam.
3080 ENTRY TRIM (FUNCTIONS 08, 09)
• Accepts any standard diameter mortise cylinder with
MS cam. Accommodates cylinder lengths from 1" to
1-1/4". (Available separately).
WARRANTY
• Five year limited.
8600 SERIES (LIFE-SAFETY)
NARROW STILE CONCEALED VERTICAL
ROD EXIT DEVICE
ELECTRIFIED
OPTION
ALUMINUM GRADE
Features
• Patented top latching mechanism interlocks door to frame
• Strong, durable construction for a high level of security
• Adjustable steel rods protected in contoured covers
• Easy to install
• Clean, unobtrusive design
• Pushbar clad or anodized, not plated, in a variety of finishes
Specifications
8600 SERIES CERTIFICATIONS:
• UL 305 Panic Hardware • California State Fire Marshall
• ANSI/BHMA A156.3 Grade 1 • New York City MEA*
*Consult Factory for specific number
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
EXIT DEVICES ED-11
8600 SERIES (LIFE-SAFETY)
NARROW STILE CONCEALED VERTICAL
ROD EXIT DEVICE
Bolts and Strikes
• The patented top latching mechanism
utilizes a rotating top bolt which
deadlatches around the header strike,
interlocking the door to the frame. Supplied
with standard header strike. The hexagonal,
hardened steel bottom bolt is shielded in a
cast housing for strength and stability.
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation
for quiet environments such as hospitals, offices, hotels, and libraries
where solenoid-driven devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The LR option uses a solenoid mounted in the pushbar for instantaneous
unlocking and locking of the exit device from a remote location or access
control device. LR option is not available on rim type exit devices
(see EL option).
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify
management of unauthorized exit. Available on minimum opening width
36". Cannot be ordered with other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be
used to activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit
devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the
latch retracted for lower profile exit devices, resulting in less damage and
quieter operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable
that the end caps match the finish of the exit device. Available for US
finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above
please see the Accessories page of the EXIT DEVICE section of this catalog.
BOTTOM
BOLT
TOP
BOLT
STANDARD
STRIKE
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no
outside operation
No outside operation –
pull only when dogged
Night latch – key retracts latch.
Requires 8650 Cylinder
Escutcheon kit
Key outside unlocks/
locks lever
Night latch - key unlocks trim,
trim retracts latch/trim relocks
when key is removed
Passage only
Cylinder Type
N/A N/A Mortise Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits.
8655 Tall Door Kit.
Trim Function 03 (key retracts latch)
requires 8650 Cylinder Escutcheon kit.
Adams Rite exit devices are operable by either
rim or mortise cylinders depending upon the
ANSI/BHMA functions of the exit device.
Entry trim and fixed pulls. PS-SE, PS-LR, and 4612
Power Transfer Device.
HOW TO ORDER 8600 SERIES (LIFE-SAFETY) NARROW STILE CONCEALED VERTICAL ROD EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING
OPTION
DOOR OPENING WIDTH
On pair of doors, specify HALF of
the total exit opening
US FINISH END CAPS
OPTION
86 22 TSE M2 -36
86 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching
End Caps
11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch
Retraction M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze
Anodized 313 C Cylinder Dogging (Blank)
No Monitor 40 40 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option AXXB Alarmed Exit Device
where XX is door opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
ED-12 EXIT DEVICES
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
3700 Series (Fire-Rated)
8700 Series (Life-Safety)
Rim Exit Device
Features
• Patented “Starwheel" bolt interlocks door to frame
• Strong, durable construction for a high level of security
• Easy to install
• Unobtrusive design for clean sight lines
• Pushbar clad or anodized, not plated, in a variety of finishes
3700 SERIES (FIRE-RATED)
8700 SERIES (LIFE-SAFETY)
RIM EXIT DEVICE
3700 SERIES (FIRE-RATED)
8700 SERIES (LIFE-SAFETY)
RIM EXIT DEVICE
Starwheel Bolt
1. When door closes, the interlocking noseguard and starwheel bolt close around the strike. The deadlocking slide spring
over, locking the starwheel bolt to the strike.
2. When pushbar is depressed, the deadlocking slide moves back, allowing the door to unlock from the strike. This unique
interlock provides solid security and prevents jamb spreading.
Strike
• Standard hardened steel strike (included).
Removable Mullion – 3889
• Allows the use of rim exit devices on paired doors without narrowing the doors. Provides higher security and better
traffic flow than paired doors with vertical rod exit devices. The 3889 is used for fire-rated applications or with non-rated
devices on wood or hollow metal doors. Available in primer only. Specify door height when ordering.
HOLLOW
METAL
WOOD ELECTRIFIED
OPTION
FIRE RATEDGRADE
13/16"
20.6mm
2"
50.8mm
2-3/4"
69.9mm
1/2"
12.7mm
1-21/32"
42.1mm
Specifications
3700 SERIES CERTIFICATIONS
• UL Panic-Fire Exit Hardware, 3-Hour Fire Label
• UL 305 Panic Hardware
• California State Fire Marshall
• New York City MEA*
• Warnock/Hersey Listing
8700 SERIES CERTIFICATIONS
• UL 305 Panic Hardware
• ANSI/BHMA A156.3 Grade 1
• California State Fire Marshall
• New York City MEA*
*Consult Factory for specific number
MATERIALS
• Pushbar made of extruded aluminum, clad or anodized in a
variety of finishes.
HANDING
• Device is non-handed. Lever Entry Trim is field reversible.
PUSHBAR LENGTH
• Standard sizes: dimensioned for 30", 36", 42", and 48"
openings. Standard width bars can be field cut to the next
smallest opening width.
DOOR THICKNESS
• Suits 1-3/4" standard, up to 2-1/4".
STILE WIDTH
• 3700 – Minimum 3-3/4". Door construction may require
additional stile width to meet fire ratings and provide
adequate strength.
• 8700 – Minimum 3-3/4".
PROJECTION
• 2-5/8" when fully projected, 1-5/8"when dogged.
DOGGING
• Standard dogging with hex key or cylinder dogging for 8700
Series only. Electric dogging also available for 3700 and
8700 Series.
FASTENERS
• Standard self-tapping screws. Optional Sex Bolt Kits 26-
0584 (two per device). Specify finish.
CYLINDERS
• See CYLINDERS section of this catalog for cylinder make,
thumbturn and trim ring information. (Available separately).
CYLINDER X FIXED PULL (FUNCTION 03)
• Accepts any standard rim cylinder.
3080 ENTRY TRIM (FUNCTIONS 08, 09)
• Accepts any standard diameter mortise cylinder with MS®
cam. Accommodates cylinder lengths from 1" to 1-1/4".
(Available separately).
WARRANTY
• Five year limited.
3700 SERIES
MODEL TYPE FIRE
RATING
DOOR
CONSTRUCTION
MAX SIZE
SINGLE DOORS
MAX SIZE PAIRS &
DOUBLE EGRESS
3700 Rim 3 Hr Hollow metal or wood 4´0" x 8´0" 8´0" x 8´0"
3700 SERIES ONLY
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
EXIT DEVICES ED-13
3700 SERIES (FIRE-RATED)
8700 SERIES (LIFE-SAFETY)
RIM EXIT DEVICE
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation for quiet
environments such as hospitals, offices, hotels, and libraries where solenoid-driven
devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The EL Option is offered only for our Rim Exit devices and uses a solenoid mounted
in the pushbar for instantaneous unlocking and locking of the rim exit device from
a remote location or access control device. The EL option is available for rim exit
devices only.
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify management of
unauthorized exit. Available on minimum opening width 36". Cannot be ordered with
other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be used to
activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the latch retracted
for lower profile exit devices, resulting in less damage and quieter operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable that the end
caps match the finish of the exit device. Available for US finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above please see the
Accessories page of the EXIT DEVICE section of this catalog.
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no outside
operation
No outside operation –
pull only when dogged
Night latch – key
retracts latch
Key outside unlocks/
locks lever
Night latch - key unlocks trim,
trim retracts latch/trim relocks
when key is removed
Passage only
Cylinder Type
N/A N/A Rim Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits.
Optional Sex Bolt Kits 26-0584 (two per device).
Adams Rite exit devices are operable
by either rim or mortise cylinders
depending upon the ANSI/BHMA
functions of the exit device.
Entry trim and fixed pulls. 4605 Transformer, 4603
Rectifier, PS-1, PS-SE, and
4612 Power Transfer Device.
HOW TO ORDER 3700 SERIES (FIRE-RATED) 8700 SERIES (LIFE-SAFETY)RIM EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING
OPTION
DOOR OPENING WIDTH
On pair of doors, specify HALF of
the total exit opening
US FINISH END CAPS
OPTION
37 00 EL M1 -36 -US3 MEC -12
37 Fire Rated 00 US Finish EL Electric Latch Retraction
(indicate 12V/24V) M Single Switch 30 30 inches US3 Bright Brass MEC Matching
End Caps 12 Volts
87 Life-Safety 01 Clear Anodized 628 SE Silent Electrification
Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass 24 Volts
02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank)
No Monitor 40 40 inches US32 Bright
Stainless
(For EL
Option Only)
03 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin
Stainless
- Without Options AXXB Alarmed Exit Device
where XX is door opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
EXIT DEVICES
ED-14
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
8800 Series (Life-Safety)
Narrow Stile
Rim Exit Device
MATERIALS
• Pushbar made of extruded aluminum, clad or anodized in a
variety of finishes.
HANDING
• Device is non-handed. Lever Entry Trim is field reversible.
PUSHBAR LENGTH
• Standard sizes: dimensioned for 30", 36", 42", and 48"
openings. Standard width bars can be field cut to the next
smallest opening width.
DOOR THICKNESS
• Suits 1-3/4" standard, up to 2-1/4".
STILE WIDTH
• Minimum 2" Stile. Fits narrow, medium, and wide stile
aluminum doors.
PROJECTION
• 2-5/8" when fully projected, 1-5/8"when dogged.
DOGGING
• Standard dogging with hex key or cylinder dogging option.
Electric dogging also available.
FASTENERS
• Standard self-tapping screws.
CYLINDERS
• See CYLINDERS section of this catalog for cylinder make,
thumbturn and trim ring information. (Available separately).
CYLINDER X FIXED PULL (FUNCTION 03)
• Accepts any standard rim cylinder.
3080 ENTRY TRIM (FUNCTIONS 08, 09)
• Accepts any standard diameter mortise cylinder with MS®
cam. Accommodates cylinder lengths from 1" to 1-1/4".
(Available separately).
WARRANTY
• Five year limited.
Starwheel Bolt
1. When door closes, the interlocking noseguard and starwheel
bolt close around the strike. The deadlocking slide springs
over, locking the starwheel bolt to the strike.
2. When pushbar is depressed, the deadlocking slide
moves back, allowing the door to unlock from the strike.
This unique interlock provides solid security and prevents
jamb spreading.
Features
• Patented “Starwheel" bolt interlocks door to frame
• Strong, durable construction for a high level of security
• Easy to install
• Unobtrusive design for clean sight lines
• Pushbar clad or anodized, not plated, in a variety of finishes
Specifications
8800 SERIES CERTIFICATIONS:
• UL 305 Panic Hardware
• ANSI/BHMA A156.3 Grade 1
• California State Fire Marshall
• New York City MEA*
*Consult Factory for specific number
8800 SERIES (LIFE-SAFETY)
NARROW STILE RIM EXIT DEVICE
ELECTRIFIED
OPTION
ALUMINUM GRADE
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
EXIT DEVICES ED-15
8800 SERIES (LIFE-SAFETY)
NARROW STILE RIM EXIT DEVICE
Strike
• Made of hardened steel. Standard strike and narrow versions for centering
doors in 4" jamb. (Both strikes are included.)
Removable Mullion - 3890
• Allows the use of rim exit devices on paired
doors without narrowing the doors. Provides
higher security and better traffic flow than
paired doors with vertical rod exit devices.
Available in anodized 313 and 628. Specify
door height when ordering.
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation
for quiet environments such as hospitals, offices, hotels, and libraries
where solenoid-driven devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The EL Option is offered only for our Rim Exit devices and uses a
solenoid mounted in the pushbar for instantaneous unlocking and locking
of the rim exit device from a remote location or access control device.
The EL option is available for rim exit devices only.
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify
management of unauthorized exit. Available on minimum opening width
36". Cannot be ordered with other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be
used to activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit
devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the
latch retracted for lower profile exit devices, resulting in less damage and
quieter operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable
that the end caps match the finish of the exit device. Available for US
finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above
please see the Accessories page of the EXIT DEVICE section of this catalog.
13/16"
20.6mm
13/16"
20.6mm
2"
50.8mm
2-3/4"
69.9mm
1/2"
12.7mm
2"
50.8mm
2-3/4"
69.9mm
1/2"
12.7mm
1-21/32"
42.1mm
RELATED ANSI TRIM FUNCTIONS
01 02 03 08 09 14
Exit only – no
outside operation
No outside operation –
pull only when dogged
Night latch – key retracts latch Key outside unlocks/
locks lever
Night latch - key unlocks trim,
trim retracts latch/trim relocks
when key is removed
Passage only
Cylinder Type
N/A N/A Rim Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits. Adams Rite exit devices are operable by either rim or
mortise cylinders depending upon the ANSI/BHMA functions
of the exit device.
Entry trim and fixed pulls. 4605 Transformer, 4603
Rectifier, PS-1, PS-SE, and
4612 Power Transfer Device.
HOW TO ORDER 8800 SERIES (LIFE-SAFETY) NARROW STILE RIM EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING
OPTION
DOOR OPENING WIDTH
On pair of doors, specify HALF of
the total exit opening
US FINISH END CAPS
OPTION
88 01 CM2 -36 -12
88 Life-Safety 00 US Finish EL Electric Latch Retraction
(indicate 12V/24V) M Single Switch 30 30 inches US3 Bright Brass MEC
Matching
End Caps
12 Volts
01 Clear Anodized 628 SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass 24 Volts
02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Monitor 40 40 inches US32 Bright
Stainless
(For EL
Option Only)
03 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin
Stainless
- Without Options AXXB Alarmed Exit Device
where XX is door opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options. ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
ED-16 EXIT DEVICES
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
3900 Series (Fire-Rated)
8900 Series (Life-Safety)
Wood Door
Concealed Vertical
Rod Exit Device
3900 SERIES (FIRE-RATED)
8900 SERIES (LIFE-SAFETY)
WOOD DOOR CONCEALED
VERTICAL ROD EXIT DEVICE
3900 SERIES (FIRE-RATED)
8900 SERIES (LIFE-SAFETY)
WOOD DOOR CONCEALED
VERTICAL ROD EXIT DEVICE
HOLLOW
METAL
WOOD ELECTRIFIED
OPTION
FIRE RATEDGRADE
Features
• Patented top latching mechanism interlocks door to frame
• Strong, durable construction for a high level of security
• Innovative top rod only design makes preparation easier and
reduces maintenance
• Easy to install
• Clean, unobtrusive design
• Pushbar clad or anodized, not plated, in a variety of finishes
Specifications
3700 SERIES CERTIFICATIONS
• UL Panic-Fire Exit Hardware
• California State Fire Marshall
• New York City MEA*
• Warnock/Hersey Listing
8700 SERIES CERTIFICATIONS
• UL 305 Panic Hardware
• ANSI/BHMA A156.3 Grade 1
• California State Fire Marshall
• New York City MEA*
*Consult Factory for specific number
MATERIALS
• Pushbar made of extruded aluminum, clad or anodized in a
variety of finishes.
HANDING
• Device is non-handed. Lever Entry Trim is field reversible.
PUSHBAR LENGTH
• Standard sizes: dimensioned for 30", 36", 42", and 48"
openings. Standard width bars can be field cut to the
next smallest opening width.
DOOR THICKNESS
• Suits 1-3/4" standard.
PROJECTION
• 2-5/8" when fully projected, 1-5/8"when dogged.
DOGGING
• Standard dogging with hex key or cylinder dogging for 8900
Series only. Electric dogging also available for 3900 and
8900 Series.
FASTENERS
• Standard self-tapping screws. Optional Sex Bolt Kits
26-0584 (two per device). Specify finish.
CYLINDERS
• See CYLINDERS section of this catalog for cylinder make,
thumbturn and trim ring information. (Available separately).
3900 SERIES ONLY
3900 SERIES
MODEL TYPE FIRE
RATING
DOOR
CONSTRUCTION
MAX SIZE
SINGLE DOORS
MAX SIZE PAIRS &
DOUBLE EGRESS
3900 CVR-TRO 20 min. Wood 4´0" x 9´0" 8´0" x 9´0"
3080 ENTRY TRIM (FUNCTIONS 08, 09)
• Accepts any standard diameter mortise cylinder with MS® cam.
Accommodates cylinder lengths from 1" to 1-1/4".
(Available separately).
WARRANTY
• Five year limited.
Fusable Link Fire Pins
• For 20-minute Fire Doors, no fire pins are required.
• For 45-minute Fire Doors, fusable link fire pins are installed
horizontally. One fire pin per door.
• For 60 and 90-minute Fire Doors, fusable link fire pins are
installed vertically. One fire pin per door.
Bolts and Strikes
• The patented top latching mechanism utilizes a rotating top
bolt which deadlatches around the header strike, interlocking
the door to the frame. Supplied with standard header strike.
For wood frames, an additional plate is supplied for securing
the header strike.
TOP BOLT TOP
STRIKE
PLATE FOR USE WITH
WOOD FRAMES IS
FURNISHED WITH 8900
TOP BOLT TOP
STRIKE
PLATE FOR USE WITH
WOOD FRAMES IS
FURNISHED WITH 8900
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
EXIT DEVICES ED-17
Options and Accessories
SILENT ELECTRIFICATION MOTORIZED LATCH RETRACTION
• The SE Motorized Latch Retraction option provides near-silent operation for quiet
environments such as hospitals, offices, hotels, and libraries where solenoid-driven
devices would be disruptive.
ELECTRIC LATCH RETRACTION
• The LR option uses a solenoid mounted in the pushbar for instantaneous unlocking
and locking of the exit device from a remote location or access control device. LR
option is not available on rim type exit devices (see EL option).
ALARMED EXIT DEVICE
• This battery-operated option emits a loud (95 decibel) alarm to notify management
of unauthorized exit. Available on minimum opening width 36". Cannot be ordered
with other exit device options.
REQUEST TO EXIT (REX) – MONITOR / SIGNAL SWITCH
• Mounted in the exit device pushbar on the hinge end, the switch can be used to
activate signal light, horn, monitor, or other devices.
CYLINDER DOGGING
• For management control of dogging exit devices for life-safety exit devices only.
ELECTRIC DOGGING
• A holding magnet keeps the pushbar depressed (set manually) and the latch
retracted for lower profile exit devices, resulting in less damage and quieter
operation.
MATCHING END CAPS
• Matching end caps are available for applications where it is preferable that the end
caps match the finish of the exit device. Available for US finishes only.
AVAILABLE FINISHES
• 313 Dark Bronze Anodized • US3 Bright Brass
• 335 Black Anodized • US4 Satin Brass
• 628 Clear Anodized • US32 Bright Stainless
• US32D Satin Stainless
For more detailed information on any of the options and accessories listed above please see the
Accessories page of the EXIT DEVICE section of this catalog.
3900 SERIES (FIRE-RATED)
8900 SERIES (LIFE-SAFETY)
WOOD DOOR CONCEALED
VERTICAL ROD EXIT DEVICE
RELATED ANSI TRIM FUNCTIONS
01 02 08 09 14
Exit only – no outside
operation
No outside operation –
pull only when dogged
Key outside unlocks/
locks lever
Night latch - key unlocks trim, trim retracts
latch/trim relocks when key is removed
Passage only
Cylinder Type
N/A N/A Mortise Mortise N/A
Please see TRIM Section of this catalog for information on Pulls and Entry Trim.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Power
REX-Monitor/Signal Kits.
Optional Sex Bolt Kits 26-0584 (two per device).
Adams Rite exit devices are operable by either
rim or mortise cylinders depending upon the
ANSI/BHMA functions of the exit device.
Entry trim and fixed pulls. PS-SE, PS-LR, and
4612 Power Transfer
Device.
HOW TO ORDER 3900 SERIES (FIRE-RATED) 8900 SERIES (LIFE-SAFETY) WOOD DOOR CONCEALED VERTICAL ROD EXIT DEVICE
Specify quantity and the following information. Order related products separately.
MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING
OPTION
DOOR OPENING WIDTH
On pair of doors, specify HALF of
the total exit opening
US FINISH END CAPS
OPTION
89 00 WLR M2 -36 -US32
39 Fire Rated 00 US Finish W Top Rod Wood LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching
End Caps
89 Life-Safety 11 Clear Anodized 628 - Standard rod SE Silent Electrification
Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass
22 Dark Bronze
Anodized 313
C Cylinder Dogging (non-fire
rated devices only) (Blank) No Monitor 40 40 inches US32 Bright Stainless
33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless
(Blank) No Option AXXB Alarmed Exit Device
where XX is door opening width
NOTE that Alarmed Exit Device option cannot be combined with Device Options or Monitoring Options.
ALSO NOTE: Split finishes (faceplate/pushbar) are not available.
EXIT DEVICES
ED-18
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
OPTIONS & ACCESSORIES FOR EXIT DEVICES
Options &
Accessories
for Exit Devices
Electric Latch Retraction
The EL option for rim exit devices and LR option for all other
exit devices (non-rim exit devices) use a solenoid mounted
in pushbar for instantaneous unlocking and locking of the
exit device from a remote location or access control device.
Because electrical operation of device is fail-secure, this option
can be used on fire-rated as well as life-safety applications. In
the event of a power failure, device automatically relocks. Rim
devices with the EL option are available in 12 or 24 VDC, and
can be powered with a simple transformer and rectifier or other
DC power supply.
SOLENOID SPECIFICATIONS FOR CVR, SVR,
AND MORTISE TYPE DEVICES (LR OPTION):
16 Amps inrush/ 0.5 Amps hold
SOLENOID SPECIFICATIONS FOR RIM DEVICES
(EL OPTION):
EL-12 VDC – 1.5 Amps inrush/hold
EL-24 VDC – 0.6 Amps inrush/hold
Solenoids are rated for both intermittent and continuous
operation. Only rim exit devices with the “EL” application are
available with mechanical dogging, specify “ELD”
Order PS-LR Power Supply separately for LR option (PS-LR
powers two exit devices). For warranty purposes Adams Rite
requires that all CVR, SVR, and Mortise type exit devices with
the LR option be paired with PS-LR power supplies. Rated for
continuous duty (see POWER).
Order PS-1 Power Supply separately for EL option
(PS-1 powers two exit devices). Rated for continuous duty
(see POWER).
4612 Power Transfer is available separately for secure and
unobtrusive means of channeling electrical wiring from the door
frame into the door itself.
Alarmed Exit Device
For all Adams Rite Exit Devices
This battery-operated option emits a loud (95 decibel) alarm to
notify management of unauthorized exit. Alarm is controlled by
a key in any standard Mortise cylinder with MS® cam to arm,
disarm, delay, or reset the alarm. Will not alter the Life-Safety
characteristics of the exit device in any way. Red letters printed
on the bar give a “hands off” warning to deter accidental
activation. Four AA alkaline batteries power twin horns for two
minutes (or until disarmed) when pushbar is depressed. Beeps
to signal need for new batteries. Minimum opening width: 36"
Silent Electrification Motorized
Latch Retraction
The SE Motorized Latch Retraction option provides near-silent operation for quiet
environments such as hospitals, offices, hotels, and libraries where solenoid-driven
devices would be disruptive. The high speed/low current draw motor (0.4 Amps
inrush current, 0.2 Amps hold current) offers a powerful yet efficient system that
allows for lighter gauge wiring and an energy-saving reduced amperage power
supply. The device also features electric latch retraction with electric dogging which
minimizes hardware projection and noise. The SE option is available with 3000/8000
Series Exit Devices and the RITE Door®.
Order PS-SE Power Supply separately (PS-SE powers two exit devices). Rated
for continuous duty (see POWER). Adams Rite requires that for optimal
performance all exit devices with the SE option be paired with PS-SE
power supplies. Failure to do so may cause permanent damage to the
exit device and will void the Manufacturer’s warranty.
4612 Power Transfer is available separately for secure and unobtrusive means of
channeling electrical wiring from the door frame into the door itself.
Adams Rite Exit Devices can be ordered with electrification
options for standalone access control or integration with
maglocks, card readers, keypads, fire alarms, power door
operators, and other control systems. Different exit device
types have different installation and power requirements.
Please refer to product pages for more information on
all available exit device types, functions, installation
requirements and complete How-to-Order guides.
EXIT DEVICES ED-19
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
Request to Exit –
Monitor/Signal Switch
For all Adams Rite Exit Devices
M1 – Single Switch
M2 – Dual Switch
Mounted in the exit device pushbar on the
hinge end, the switch can be used to activate signal light, horn, monitor,
or other devices. Switch can be wired for normally open or normally
closed. Can be retrofit in field to existing exit devices. Dual switch version
offers redundancy as required by some building codes or it can operate
a second signaling device.
Order REX-Monitor/Signal Kits for upgrading any 3000 or 8000 Series
device: 91-0897-01 for Single Switch or 91-0897-02 for Dual Switch.
Cylinder Dogging
For all non-fire rated Adams Rite Exit Devices
For management control of dogging. Any standard 15/16" to 1-1/8"
long Mortise cylinder with MS® cam can be used in a pushbar
prepared at factory with Cylinder Dogging kit. Not for use with Alarm,
ED, EL, LR or SE options.
Electric Dogging
For all Adams Rite Exit Devices
The ED option uses a holding magnet that keeps the pushbar
depressed (set manually) and the latch retracted for a lower profile
exit device, resulting in less damage and quieter operation. An internal
microswitch signals when the bar is depressed – ideal for automatic
door operators. On fire-rated devices, it must be wired through the fire
alarm system. Devices operate at 24 VDC at 0.6 Amps, with only a
transformer and rectifier.
Not to be used as an access control element. SE Motorized Latch
Retraction option or LR Latch Retraction option is recommended with
access control devices such as card readers or keypads.
Matching End Caps
Standard Adams Rite exit devices come with black metal end caps. Matching
end caps are available for applications where it is preferable that the end
caps match the finish of the exit device. Available for US finishes only.
Specify by adding “MEC” after the regular ordering matrix.
Monitored Dummy Pushbar
8099M1 – Single Switch
8099M2 – Dual Switch
8099-00 – Dummy Only
Dummy pushbar with no latch mechanism but with either a single or
dual monitor/signal switch. May be used with a maglock, where bar turns
off magnet and allows exit from building. Dual switch version allows
redundancy where required by code or the operation of a signal device.
Specify door type and width when ordering. (How to order below)
TRIM
3080 Series Entry Trim
The Grade 1 3080 Series Entry Trim provides outside activation for
doors with any type of Adams Rite deadlatch or exit device. The locked
handle is protected from vandalism and forced entry with a breakaway
clutching mechanism.
3090 Keyless Entry
A battery-operated keyless entry control device, the eForce-150 3090
Keyless Entry provides access control for Adams Rite deadlocks,
deadlatches, and exit devices for aluminum stile, steel, and
wood door applications.
The eForce 3090P (Prox) and 3090C (iCLASS) Keyless Entries provide
maximum security with either HID® Prox or iCLASS contactless card reader.
HOW TO ORDER 8099 DUMMY PUSHBAR Specify quantity and the following information. Order related products separately.
PRODUCT NO. MONITOR DOOR TYPE PUSHBAR FINISH WIDTH US FINISH
8099 -M1 -3 036 -US32
00 Inactive Dummy Bar 3 Aluminum 0 US Finish 30 30 inches US3 Bright Brass
M0 Active Dummy Bar, no monitoring switches 4 Wood or hollow metal 1 Clear Anodized 628 36 36 inches US4 Satin Brass
M1 Active Dummy Bar, one monitoring switch 2 Dark Bronze Anodized 313 40 40 inches US32 Bright Stainless
M2 Active Dummy Bar, two monitoring switches 3 Black Anodized 335 48 48 inches US32D Satin Stainless
OPTIONS & ACCESSORIES FOR EXIT DEVICES
ED-20 EXIT DEVICES
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
7100, 7101
Electric Strikes
Specifications
FAIL-SAFE/FAIL-SECURE
• Field convertible from one mode to the other.
However, AC intermittent solenoid must not be used
continuously in either.
CASE
• Approximately 1" x 3-3/8" x 1-5/8" deep.
STRIKE LIP
• Basic 7100 strike has lip of proper length for 1-3/4" thick
door that closes flush with jamb edge. Where door thickness
or jamb shape differs from this standard relationship, lip
extension kits are available, specified by last dash number.
Not available on 7101.
STRIKE OPENING
• 5/8" x 1-7/16" x 1/2" deep. Bolt retainer jaw is stainless
steel. Strike accepts bolt of any Adams Rite 4500, 4700
(discontinued), or 4900 Deadlatch or cylindrical latches.
FACEPLATE
• Measures 1-1/4” x 4-7/8”. 7100 has flat faceplate; 7101
is radiused to match nose on inactive leaf in a pair of
narrow stile glass doors. Available in a wide range of
architectural finishes.
VOLTAGE
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0.17
STANDARD PACKAGE
• Individually boxed with mounting screws, mounting clips,
adhesive shims to accommodate jamb or stile extrusion
thickness greater or less than nominal 1/8".
OPTIONS
• Available with two monitoring signal switches which sense
whether latchbolt is in strike and whether strike jaw is
blocked. Choice of mounting in AC and DC for intermittent
or continuous duty. 7100 Electric Strike (flat faceplate)
available with extended strike lip. Specify assembled
for either fail-secure (locked when unpowered) or fail-
safe (locked when powered) operation, but can be field
converted to the other mode.
7100, 7101 ELECTRIC STRIKES
ALUMINUM UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
7100, 7101 Electric Strikes with 4-7/8" faceplates are
designed for Adams Rite deadlatches or cylindrical
locksets with 1/2" to 5/8" latchbolt projection. For use
in aluminum jambs and stiles.
Function
Remote electrical control of any door equipped with an Adams Rite 4500,
4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever)
type lockset with 1/2" to 5/8" latchbolt projection. Electrical actuation unlocks
strike jaw, releasing latchbolt so door can be opened without operating latch
itself. Extremely compact mechanism fits into aluminum jamb (or opposing
door) sections as shallow as 1-5/8". Fits existing prep for discontinued Adams
Rite 7000, 7500, 7800 Electric Strikes.
ELECTRIC STRIKES ES-1
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
VERTICAL OF ELECTRIC
STRIKE FACEPLATE DIRECTLY
OPPOSITE OF DEADLATCH
RADIUS FACE
OF 7101
PRESSED
METAL NUT
MOUNTING
CLIP PRESSURE
SENSITIVE
SPACER
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
JAMB
HORIZONTAL OF
ELECTRIC STRIKE
AND LATCHBOLT
R
(4 PLACES)
DRILL & CSK
FOR 8-32 SCREW
(2 PLACES)
JAMB
EDGE “A”
1-15/32"
37.3mm
1/4"
6.4mm
1"
25.4mm
1-1/8"
28.6mm
1-1/4"
31.8mm
1-1/4"
31.8mm
3/32"
2.4mm
1-5/8"
41.3mm
4-1/8"
104.8mm
4-7/8"
123.8mm
4-7/8"
123.8mm
6-1/8"
155.8mm
5/32"
4mm
3-3/8"
85.7mm
3-3/8"
85.7mm
3-3/8"
85.7mm
21/32"
16.7mm
1-7/16"
36.5mm
1-1/16"
27mm
2-5/8"
66.7mm
21/32"
16.7mm
CYLINDER OF
ADAMS RITE
LATCH
“A”
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
(SEE HOW TO ORDER)
MOUNTING BRACKETS FURNISHED
7100, 7101 ELECTRIC STRIKES
Dimensions Jamb Preparation
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions. 4603 Rectifier, 4605/4606 Transformer, Piezo Horn
audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.
Installation
HOW TO ORDER 7100, 7101 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE
SHAPE VO LTAGE CURRENT AND DUTY FEATURES* FINISH** LIP EXTENSIONS (DIM. A)
(Door Centerline to Jamb Edge)
710 0-3 1 0 -628 -00
0 Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"
1 Radius 4 16 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"
5 24 Volt 7 Monitored/ Fail-Safe 626 Satin Chrome 02 1-5/8" 09 2-1/2"
9 Monitored/ Fail-Secure 628 Clear Anodized 03 1-3/4" 12 2-7/8"
*Fail-secure can be field converted to fail-safe or vice-versa. **7101 available in 628, 313, 335 only.
ES-2 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
7110, 7111
Electric Strikes
Specifications
FAIL-SAFE/FAIL-SECURE
• Field convertible from one mode to the other.
However, AC intermittent solenoid must not be used
continuously in either.
CASE
• Approximately 1" x 3-3/8" x 1-5/8" deep.
STRIKE LIP
• Basic 7110 strike has lip of proper length for 1-3/4"
thick door that closes flush with jamb edge. Where
door thickness or jamb shape differs from this standard
relationship, lip extension kits are available, specified by
last dash number.
STRIKE OPENING
• 5/8" x 1-7/16" x 1/2" deep. Bolt retainer jaw is stainless
steel. Strike accepts bolt of any Adams Rite 4500, 4700
(discontinued), or 4900 Deadlatch or cylindrical latches.
FACEPLATE
• 7110 faceplate measures 1-7/16” x 7-15/16”. 7111
faceplate measures 1-7/16” x 10-1/4”. Available in a wide
range of architectural finishes.
VOLTAGE
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0.17
STANDARD PACKAGE
• Individually boxed with mounting screws, mounting
clips, and adhesive shims to accommodate jamb or stile
extrusion thickness greater or less than nominal 1/8".
OPTIONS
• Available with two monitoring signal switches which sense
whether latchbolt is in strike and whether strike jaw is blocked.
Choice of voltage in AC and DC for intermittent or continuous
duty. Specify assembled for either fail-secure (locked when
unpowered) or fail-safe (locked when powered) operation, but
can be field converted to the other mode. Model 7110 and
7111 are identical except for their faceplate length.
7110, 7111 ELECTRIC STRIKES
7110 Electric Strike with 7-15/16" faceplate and 7111
Electric Strike with 10-1/4" faceplate are designed for
Adams Rite deadlatches or cylindrical locksets with 1/2"
to 5/8" latchbolt projection. For use in hollow metal, wood
and aluminum door jambs.
Function
Replaces earlier 002, 7510, or 7810 electric releases in either metal or wood
jambs for remote electrical control of any door equipped with an Adams Rite 4500,
4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type
lockset with 1/2" to 5/8" latchbolt projection. Electrical actuation unlocks strike jaw,
releasing latchbolt so door can be opened without operating latch itself. Extremely
compact mechanism fits into jamb sections as shallow as 1-5/8".
ALUMINUM HOLLOW
METAL
WOOD UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
ELECTRIC STRIKES ES-3
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
HORIZONTAL OF
ELECTRIC STRIKE
HORIZONTAL
OF
CYLINDER
(A-R 4500/4900
SERIES
DEADLATCH)
VERTICAL OF
ELECTRIC STRIKE
FACEPLATE DIRECTLY
OPPOSITE OF
DEADLATCH SERIES
4500/4900
TURN STRIKE UPSIDE
DOWN FOR OPPOSITE HAND
“A”
HORIZONTAL OF
ELECTRIC STRIKE
HORIZONTAL
OF CYLINDER
(A-R 4500/4900 SERIES
DEADLATCH)
DRILL & CSK
FOR 8-32 SCREW
(2 PLACES)
VERTICAL OF
ELECTRIC STRIKE
FACEPLATE
DIRECTLY OPPOSITE
OF DEADLATCH
R
(4 PLACES)
5/32"
4mm
1-7/16"
36.5mm
21/32"
16.7mm
“A”
1-15/32"
37.3mm 1/4"
6.4mm
1"
25.4mm
1-1/8"
28.6mm
1-5/8"
41.3mm
1-1/16"
27mm 21/32"
16.7mm
1-7/16"
36.5mm
3/32"
2.4mm
7110:
7-15/16"
201.6mm
7110:
7-15/16"
201.6mm
1-7/16"
36.5mm
7110:
9-3/16"
233.4mm
7111:
10-1/4"
260.4mm
7111:
9-29/64"
240.2mm
7111:
11-1/2"
292.1mm
7110:
7-7/16"
188.9mm
7111:
9-29/64"
240.1mm
7110:
7-15/16"
201.6mm
7111:
10-1/4"
260.4mm
7111:
10-1/8"
257.2mm
JAMB
EDGE “A”
6-7/8"
174.6mm
3-3/8"
85.7mm
3-3/8"
85.7mm 1-3/16"
30.23mm
1-3/64"
26.6mm
3-3/8"
85.7mm
3-3/8"
85.7mm
1-41/64"
41.7mm
21/32"
16.7mm
17/64"
6.7mm
23/32"
18.3mm
1-7/16"
36.5mm
3/32"
2.4mm
1-5/64"
27.4mm
1-7/16"
36.5mm
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
(SEE HOW TO ORDER)
MOUNTING BRACKETS FURNISHED
7110, 7111 ELECTRIC STRIKES
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions. 4603 Rectifier, 4605/4606 Transformer, Piezo Horn
audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.
Dimensions Jamb Prep in Aluminum
Installation in Wood
HOW TO ORDER 7110, 7111 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE
LENGTH VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A)
(Door Centerline to Jamb Edge)
711 0-3 1 0 -652 -00
0 7-15/16" 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 652 Satin Chrome 00 1-1/16" or less 05 2"
1 10-1/4" 4 16 Volt 4 AC Intermittent 5 Fail-Safe 01 1-1/2" 07 2-1/4"
5 24 Volt 7 Monitored/ Fail-Safe 02 1-5/8" 09 2-1/2"
9 Monitored/ Fail-Secure 03 1-3/4" 12 2-7/8"
*Fail-secure can be field converted to fail-safe or vice-versa
ES-4 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
7130, 7131
Electric Strikes
Specifications
FAIL-SAFE/FAIL-SECURE
• Field convertible from one mode to the other.
However, AC intermittent solenoid must not be used
continuously in either.
CASE
• Approximately 1" x 3-3/8" x 1-5/8" deep.
STRIKE LIP
• Basic 7130 strike has lip of proper length for 1-3/4" thick
door that closes flush with jamb edge. Where door thickness
or jamb shape differs from this standard relationship, lip
extension kits are available, specified by last dash number.
Not available for 7131.
STRIKE OPENING
• 5/8" x 1-7/16" x 1/2" deep. Bolt retainer jaw is stainless
steel. Strike accepts bolt of any Adams Rite 4500, 4700
(discontinued), or 4900 Deadlatch or cylindrical latches.
FACEPLATE
• Measures 1-1/4” x 6-7/8”. 7130 has flat faceplate; 7131
is radiused to match nose on inactive leaf in a pair of
narrow stile glass doors. Available in a wide range of
architectural finishes.
VOLTAGE
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0.17
STANDARD PACKAGE
• Individually boxed with mounting screws, mounting clips,
adhesive shims to accommodate jamb or stile extrusion
thickness greater or less than nominal 1/8".
OPTIONS
• Choice of mounting in AC and DC for intermittent or
continuous duty. 7130 Electric Strike (flat faceplate)
available with extended strike lip. Specify assembled
for either fail-secure (locked when unpowered) or fail-
safe (locked when powered) operation, but can be field
converted to the other mode
7130, 7131 ELECTRIC STRIKES
ALUMINUM UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
7130, 7131 Electric Strikes with 6-7/8" faceplates are
designed for Adams Rite deadlatches or cylindrical
locksets with 1/2" to 5/8" latchbolt projection. For use in
aluminum jambs and stiles.
Function
Remote electrical control of any narrow stile or hollow metal door equipped
with an Adams Rite Series 4500, 4700, or 4900 Series (or similar) Deadlatch
or cylindrical (key-in-knob/lever) type lockset with 1/2" to 5/8" latchbolt
projection. Large faceplate is designed to cover strike opening when
converting from an MS® pivoted-bolt deadlock to a deadlatch. Electrical
actuation unlocks strike jaw, releasing latchbolt so door can be opened without
operating latch itself. Extremely compact mechanism fits into aluminum jamb
(or opposing door) sections as shallow as 1-5/8". Replaces discontinued
Adams Rite 7030, 7530, 7830 Electric Strikes.
ELECTRIC STRIKES ES-5
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
JAMB
EDGE “A”
PRESSED
METAL NUT
MOUNTING
CLIP PRESSURE
SENSITIVE
SPACER JAMB
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND.
RADIUS FACE
OF 7131
1-15/32"
37.3mm 1/4"
6.4mm
2-9/16"
65.1mm
1"
25.4mm
1-1/8"
28.6mm
3-3/8"
85.7mm
1-7/16"
36.5mm
6-7/8"
174.6mm
8-1/4"
209.6mm
HORIZONTAL OF
ELECTRIC STRIKE
DRILL & CSK
FOR 8-32 SCREW
(2 PLACES)
VERTICAL OF
ELECTRIC STRIKE
FACE PLATE
DIRECTLY
OPPOSITE OF
DEADLATCH
HORIZONTAL
OF CYLINDER
(A-R 4500/4900
SERIES DEADLATCH)
1-1/4"
31.8mm
21/32"
16.7mm
R
(4 PLACES)
5/32"
4mm
1-5/8"
41.3mm
1-1/16"
27mm 21/32"
16.7mm
1-1/4"
31.8mm 3/32"
2.4mm
3-3/8"
85.7mm
3-3/8"
85.7mm
6-7/8"
174.6mm
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
(SEE HOW TO ORDER)
MOUNTING BRACKETS FURNISHED
7130, 7131 ELECTRIC STRIKES
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions. 4603 Rectifier, 4605/4606 Transformer, Piezo Horn
audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700
Deadlatch is discontinued and replaced by 4900 Deadlatch.
Dimensions Jamb Preparation
Installation
HOW TO ORDER 7130, 7131 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPL ATE
LENGTH VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A)
(Door Centerline to Jamb Edge)
713 0-3 1 0 -313 -00
0 Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"
1 Radius 4 16 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"
5 24 Volt 628 Clear Anodized 02 1-5/8" 09 2-1/2"
03 1-3/4" 12 2-7/8"
*Fail-secure can be field converted to fail-safe or vice-versa
ES-6 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
7140 Electric Strikes
Specifications
FAIL-SAFE/FAIL-SECURE
• Field convertible from one mode to the other.
However, AC intermittent solenoid must not be used
continuously in either.
CASE
• Approximately 1" x 3-3/8" x 1-5/8" deep.
STRIKE LIP
• Basic 7140 strike has lip of proper length for 1-3/4"
thick door that closes flush with jamb edge. Where
door thickness or jamb shape differs from this standard
relationship, lip extension kits are available, specified by
last dash number.
STRIKE OPENING
• 5/8" x 1-7/16" x 1/2" deep. Bolt retainer jaw is stainless
steel. Strike accepts bolt of any Adams Rite 4500, 4700
(discontinued), or 4900 Deadlatch or cylindrical latches.
FACEPLATE
• Measures 1-1/4 x 4-7/8”. Faceplate is flat, with square
corners. Available in a wide range of architectural finishes.
VOLTAGE
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0.17
STANDARD PACKAGE
• Individually boxed with mounting screws. Includes
mounting clips and adhesive shims for use where welded
tabs are omitted.
OPTIONS
• Choice of mounting in AC and DC for intermittent or
continuous duty. 7140 Electric Strike (flat faceplate)
available with extended strike lip. Specify assembled
for either fail-secure (locked when unpowered) or fail-
safe (locked when powered) operation, but can be field
converted to the other mode.
7140 ELECTRIC STRIKES
7140 Electric Strikes with 4-7/8" faceplates are designed
for Adams Rite deadlatches or cylindrical locksets with 1/2"
to 5/8" latchbolt projection. For use in hollow metal or wood
doors and jambs.
Function
Remote electrical control of any door equipped with an Adams Rite 4500,
4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever)
type locksets with 1/2" to 5/8" latchbolt projection. Electrical actuation unlocks
strike jaw, releasing latchbolt so door can be opened without operating latch
itself. Extremely compact mechanism fits into aluminum jamb sections as
shallow as 1-5/8". Fits existing prep for discontinued Adams Rite 7040, 7840N,
7850 Electric Strikes.
HOLLOW
METAL
WOOD UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
FITS STANDARD
MOUNTING
TAB ANSI PREP
3/32"
2.4mm
ELECTRIC STRIKES ES-7
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
7140 ELECTRIC STRIKES
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions. 4603 Rectifier, 4605/4606 Transformer, Piezo Horn
audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.
Dimensions
HORIZONTAL
OF STRIKE
SAME AS
HORIZONTAL
OF LATCH BOLT
“A”
JAMB
EDGE “A”
1-1/4"
31.8mm 3/32"
2.4mm
3-3/8"
85.7mm
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
VERTICAL OF DEADLATCH MOUNTING
SCREWS IN SAME PLANE AS ELECTRIC
STRIKE MOUNTING SCREWS
1-15/32"
37.3mm 1/4"
6.4mm
1"
25.4mm
1-1/8"
28.6mm
1-5/8"
41.3mm
1-1/16"
27mm 21/32"
16.7mm
1-3/64"
26.6mm
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
3/16"
4.8mm
1-5/32"
29.4mm
5/8"
15.9mm
4-7/8"
23.8mm
4-1/8"
104.8mm
3-5/8"
92.1mm
21/32"
16.7mm
1-7/16"
36.5mm
3-3/8"
85.7mm
1-1/4"
31.8mm
1-11/64"
29.8mm
HORIZONTAL
OF
CYLINDER
(A-R 4500/4900
SERIES
DEADLATCH)
HORIZONTAL
OF CYLINDER
(A-R 4500/4900
SERIES DEADLATCH)
HORIZONTAL
OF
ELECTRIC
STRIKE
HORIZONTAL OF
ELECTRIC STRIKE
PRESSURE
SENSITIVE
SPACER
MOUNTING BRACKET
(MOUNTING CLIP)
WELDED TO JAMB
(OR PROVIDED)
"A"
12-24
(2 PLCS)
VERTICAL CENTERLINE OF ELECTRIC
STRIKE FACEPLATE DIRECTLY OPPOSITE
CENTERLINE OF DEADLATCH
1-7/16"
36.5mm
1-41/64"
41.7mm
21/32"
16.7mm
3/32"
2.4mm
1-5/64"
27.4mm
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
(SEE HOW TO ORDER)
MOUNTING BRACKETS FURNISHED
Jamb Prep in Wood
Jamp Prep &
Installation
in Steel
HOW TO ORDER 7140 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. VO LTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A)
(Door Centerline to Jamb Edge)
7140 -3 1 0 -628 -00
3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"
4 16 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 50 1-3/8" 07 2-1/4"
5 24 Volt 626 Satin Chrome 01 1-1/2" 09 2-1/2"
628 Clear Anodized 02 1-5/8" 12 2-7/8"
03 1-3/4"
*Fail-secure can be field converted to fail-safe or vice-versa
ES-8 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
7160 Electric Strike
Specifications
FAIL-SAFE/FAIL-SECURE
• Field convertible from one mode to the other.
However, AC intermittent solenoid must not be used
continuously in either.
CASE
• Approximately 1" x 3-3/8" x 1-7/8" deep.
STRIKE LIP
• Basic 7160 strike has lip of proper length for 1-3/4"
thick door that closes flush with jamb edge. Where
door thickness or jamb shape differs from this standard
relationship, lip extension kits are available, specified by
last dash number.
STRIKE OPENING
• 3/4" x 1-7/16" x 5/8" deep. Bolt retainer jaw is stainless
steel. Strike location must be centered on latchbolt.
FACEPLATE
• Measures 1-1/4 x 4-7/8”. Faceplate is flat, with radiused
corners. Available in a wide range of architectural finishes.
VOLTAGE
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0.17
STANDARD PACKAGE
• Individually boxed with mounting screws, mounting clips,
and adhesive shims to accommodate jamb extrusion
thickness greater or less than nominal 1/8".
OPTIONS
• Available with two monitoring signal switches which sense
whether latchbolt is in strike and whether strike jaw is blocked.
Choice of voltage in AC and DC for intermittent or continuous
duty. Specify assembled for either fail-secure (locked when
unpowered) or fail-safe (locked when powered) operation, but
can be field converted to the other mode.
7160 ELECTRIC STRIKE
7160 Electric Strikes with 4-7/8" faceplates are designed for
mortise or cylindrical type locksets with up to 3/4" latchbolt
projection without deadbolt. For use in aluminum jambs.
Function
Remote electrical control of any door equipped with a mortise or cylindrical
type lockset with up to 3/4" latchbolt projection without deadbolt. Electrical
actuation unlocks strike jaw, releasing latchbolt so door can be opened without
operating latch itself. Extremely compact mechanism fits into aluminum
jamb (or opposing door) sections as shallow as 1-7/8". Fits existing prep for
discontinued Adams Rite 7560, 7860 Electric Strikes.
ALUMINUM UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
All 3/4" throw latches
require 1/8" minimum
door gap. Horizontal center
line of strike must match line
of mortise latchbolt.
ELECTRIC STRIKES ES-9
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
PRESSED
METAL NUT
MOUNTING
CLIP PRESSURE
SENSITIVE
SPACER
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND.
JAMB
20°
1-1/4"
31.8mm 3/32"
2.4mm
3-3/8"
85.7mm
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
JAMB
EDGE “A”
1/4"
6.4mm
1-9/16"
39.7mm
1"
25.4mm
1-1/8"
28.6mm
1-1/2"
38.1mm
1-13/16"
46mm 1"
25.4mm 27/32"
21.4mm
HORIZONTAL
OF ELECTRIC STRIKE
AND LATCHBOLT
(NOT PER STANDARD
ANSI PREP LOCATION)
DRILL & CSK
FOR 8-32 FLAT
HEAD SCREW
(2 PLACES)
VERTICAL OF
ELECTRIC STRIKE
FACEPLATE
DIRECTLY
OPPOSITE OF
DEADLATCH
R
(4 PLACES)
5/32"
4mm
3-3/8"
85.7mm
6-1/8"
155.6mm
4-7/8"
123.8mm
1-1/4"
31.8mm
27/32"
21.4mm
7160 ELECTRIC STRIKE
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions. 4603 Rectifier, 4605/4606 Transformer,
Piezo Horn audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700
Deadlatch is discontinued and replaced by 4900 Deadlatch.
HOW TO ORDER 7160 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A)
(Door Centerline to Jamb Edge)
7160 -3 1 0 -628 -00
3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"
4 16 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"
5 24 Volt 7 Monitor/Fail-Safe 626 Satin Chrome 02 1-5/8" 09 2-1/2"
9 Monitor/Fail-Secure 628 Clear Anodized 03 1-3/4" 12 2-7/8"
*Fail-secure can be field converted to fail-safe or vice-versa
Dimensions Nominal, subject to tolerance extremes Jamb Preparation
Installation
ES-10 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
7170 Electric Strike
Specifications
FAIL-SAFE/FAIL-SECURE
• Field convertible from one mode to the other.
However, AC intermittent solenoid must not be used
continuously in either.
CASE
• Approximately 1" x 3-3/8" x 1-7/8" deep.
STRIKE LIP
• Basic 7170 strike has lip of proper length for 1-3/4"
thick door that closes flush with jamb edge. Where
door thickness or jamb shape differs from this standard
relationship, lip extension kits are available, specified by
last dash number.
STRIKE OPENING
• 5/8" x 1-7/16" x 5/8" deep. Bolt retainer jaw is
stainless steel.
FACEPLATE
• Measures 1-1/4 x 4-7/8”. Faceplate is flat, with square
corners. Available in a wide range of architectural finishes.
VOLTAGE
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0.17
STANDARD PACKAGE
• Individually boxed with mounting screws. Includes
mounting clips and adhesive shims for use where welded
tabs are omitted.
OPTIONS
• Available with two monitoring signal switches which sense
whether latchbolt is in strike and whether strike jaw is blocked.
Choice of voltage in AC and DC for intermittent or continuous
duty. Specify assembled for either fail-secure (locked when
unpowered) or fail-safe (locked when powered) operation, but
can be field converted to the other mode.
7170 ELECTRIC STRIKE
7170 Electric Strikes with 4-7/8" faceplates are designed for
mortise or cylindrical type locksets with up to 3/4" latchbolt
projection without deadbolt. For use in hollow metal or
wood door jambs.
Function
Remote electrical control of any door equipped with a mortise or cylindrical
type lockset with up to 3/4" latchbolt projection without deadbolt. Electrical
actuation unlocks strike jaw, releasing latchbolt so door can be opened without
operating latch itself. Extremely compact mechanism fits into hollow metal
jamb sections as shallow as 1-7/8". Fits existing prep for discontinued Adams
Rite 7560AN, 7570, 7860AN, 7870 Electric Strikes.
The electric strike must be positioned to accommodate offset mortise latches
during installation. Please refer to installation instructions.
HOLLOW
METAL
WOOD UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
FITS STANDARD
MOUNTING
TAB ANSI PREP
3/32"
2.4mm
All 3/4" throw latches
require 1/8" minimum
door gap. Horizontal center
line of strike must match line
of mortise latchbolt.
ELECTRIC STRIKES ES-11
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
7170 ELECTRIC STRIKE
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions. 4603 Rectifier, 4605/4606 Transformer, Piezo Horn
audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.
Dimensions
VERTICAL OF DEADLATCH MOUNTING
SCREWS IN SAME PLANE AS ELECTRIC
STRIKE MOUNTING SCREWS
HORIZONTAL OF
STRIKE SAME AS
HORIZONTAL
OF LATCHBOLT
“A”
“A”
JAMB
EDGE
20°
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
1-1/4"
31.8mm
5/8"
15.9mm
1/8"
3.2mm
1-3/8"
34.9mm 1-1/8"
28.6mm
1/4"
6.4mm
1"
25.4mm
1-1/8"
28.6mm
1-1/4"
31.8mm 3/32"
2.4mm
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
3-3/8"
85.7mm
1-1/2"
38.1mm
27/32"
21.4mm
1-9/16"
39.7mm
1-13/16"
46mm 1"
25.4mm
1-53/64"
46.4mm
27/32"
21.4mm
3/32"
2.4mm
1-1/2"
38.1mm
4-7/8"
123.8mm
4-1/8"
104.8mm
3-5/8"
92.1mm
27/32"
21.4mm
3-3/8"
85.7mm
1-1/4"
31.5mm
PRESSURE
SENSITIVE
SPACER
MOUNTING BRACKET
(MOUNTING CLIP)
WELDED TO JAMB
(OR PROVIDED)
"A"
12-24
(2 PLCS)
VERTICAL CENTERLINE OF ELECTRIC
STRIKE FACEPLATE DIRECTLY OPPOSITE
CENTERLINE OF DEADLATCH
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
(SEE HOW TO ORDER)
MOUNTING BRACKETS FURNISHED
HORIZONTAL
OF
ELECTRIC
STRIKE
VERTICAL OF DEADLATCH MOUNTING
SCREWS IN SAME PLANE AS ELECTRIC
STRIKE MOUNTING SCREWS
HORIZONTAL OF
STRIKE SAME AS
HORIZONTAL
OF LATCHBOLT
“A”
“A”
JAMB
EDGE
20°
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
1-1/4"
31.8mm
5/8"
15.9mm
1/8"
3.2mm
1-3/8"
34.9mm 1-1/8"
28.6mm
1/4"
6.4mm
1"
25.4mm
1-1/8"
28.6mm
1-1/4"
31.8mm 3/32"
2.4mm
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
3-3/8"
85.7mm
1-1/2"
38.1mm
27/32"
21.4mm
1-9/16"
39.7mm
1-13/16"
46mm 1"
25.4mm
1-53/64"
46.4mm
27/32"
21.4mm
3/32"
2.4mm
1-1/2"
38.1mm
4-7/8"
123.8mm
4-1/8"
104.8mm
3-5/8"
92.1mm
27/32"
21.4mm
3-3/8"
85.7mm
1-1/4"
31.5mm
PRESSURE
SENSITIVE
SPACER
MOUNTING BRACKET
(MOUNTING CLIP)
WELDED TO JAMB
(OR PROVIDED)
"A"
12-24
(2 PLCS)
VERTICAL CENTERLINE OF ELECTRIC
STRIKE FACEPLATE DIRECTLY OPPOSITE
CENTERLINE OF DEADLATCH
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
(SEE HOW TO ORDER)
MOUNTING BRACKETS FURNISHED
HORIZONTAL
OF
ELECTRIC
STRIKE
Jamb Prep in Wood
Jamb
Prep &
Installation
in Steel
HOW TO ORDER 7170 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH LIP EXTENSIONS (DIM. A)
Door Centerline to Jamb Edge
7170 -3 1 0 -628 -00
3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or lessv 05 2"
4 16 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 50 1-3/8" 07 2-1/4"
5 24 Volt 7 Monitor/Fail-Safe 626 Satin Chrome 01 1-1/2" 09 2-1/2"
9 Monitor/Fail-Secure 628 Clear Anodized 02 1-5/8" 12 2-7/8"
03 1-3/4"
*Fail-secure can be field converted to fail-safe or vice-versa
ES-12 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
7240 Fire-Rated
Electric Strike
Specifications
UL10C, CAN/ULC-S104, FIRE RATED 3 HR.
CASE
• Approximately 1" x 3-3/8" x 1-5/8" deep.
STRIKE LIP
• Basic 7240 strike has lip of proper length for 1-3/4" thick
door that closes flush with jamb edge.
STRIKE OPENING
• 5/8" x 1-7/16" x 9/16" deep. Bolt retainer jaw and
strike lip are stainless steel. Strike accepts bolt from a
variety of latchsets.
FACEPLATE
• Measures 1-1/4 x 4-7/8”. Faceplate is flat, with
square corners.
VOLTAGE
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0.17
STANDARD PACKAGE
• Individually boxed with mounting screws. Includes
mounting clips and adhesive shims for use where welded
tabs are omitted.
OPTIONS
• Available with two monitoring signal switches which sense
whether latchbolt is in strike and whether strike jaw is
blocked. Choice of voltage in AC and DC for intermittent or
continuous duty. Assembled for fail-secure (locked when
unpowered) operation.
7240 FIRE-RATED ELECTRIC STRIKE
7240 Fire-Rated Electric Strikes with 4-7/8" faceplates are
designed for cylindrical locksets with up to 5/8" latchbolt
projection. For use in hollow metal door jambs.
Function
Remote electrical control of any door equipped with cylindrical (key-in-knob/
lever) type locksets with up to 5/8" latchbolt projection. Electrical actuation
unlocks strike jaw, releasing latchbolt so door can be opened without
operating latch itself. Extremely compact mechanism fits into jamb sections
as shallow as 1-21/32". Fire-rated in fail-secure mode.
HOLLOW
METAL
UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
FIRE RATED
 HOUR
GRADE 1
E09321
FITS STANDARD
MOUNTING
TAB ANSI PREP
3/32"
2.4mm
ELECTRIC STRIKES ES-13
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
7240 FIRE-RATED ELECTRIC STRIKE
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Power
4603 Rectifier, 4605/4606 Transformer, Piezo Horn audible indicator, PS-1.
Dimensions Installation in Steel Jamb
HORIZONTAL OF
ELECTRIC STRIKE SAME
AS HORIZONTAL
OF LATCHBOLT
VERTICAL OF ELECTRIC STRIKE
FACEPLATE DIRECTLY OPPOSITE
OF DEADLATCH
MOUNTING
BRACKET
WELDED TO
JAMB
12-24
(2 PLCS.)
“A”
“A”
JAMB
EDGE
1-1/4"
31.8mm
3/32"
2.4mm
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
3-3/8"
85.7mm
1/4"
6.4mm
1"
25.4mm
1-1/8"
28.6mm
1-15/32"
37.3mm
1-5/8"
41.3mm
21/32"
16.7mm
1-1/16"
27mm
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
21/32"
16.7mm
1-1/4"
31.8mm
3-5/8"
92mm
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
(SEE HOW TO ORDER)
MOUNTING BRACKETS FURNISHED
HOW TO ORDER 7240 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES FINISH LIP EXTENSIONS (DIM. A)
Door Centerline to Jam Edge for Interior Frames
7240 -3 1 0 -630 -50
3 12 Volt 1 DC Continuous or Intermittent 0 Fail-Secure* 630 Satin Stainless 00 1-1/16" or less
5 24 Volt 4 AC Intermittent 9 Monitor/Fail-Secure 50 1-3/8"
*Not available Fail-Safe
ES-14 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
7270 Fire-Rated
Electric Strikes
Specifications
UL10C, CAN/ULC-S104, FIRE RATED 3 HR.
CASE
• Approximately 1" x 3-3/8" x 1-7/8" deep.
STRIKE LIP
• Basic 7270 strike has lip of proper length for 1-3/4" thick
door that closes flush with jamb edge.
STRIKE OPENING
• 3/4" x 1-7/16" x 5/8" deep. Bolt retainer jaw and strike lip
are stainless steel. Strike accepts bolt from a variety of
latchsets or mortise panic exit devices when it is centered
on strike.
FACEPLATE
• Measures 1-1/4” x 4-7/8”. Faceplate is flat, with
square corners.
VOLTAGE
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0.17
STANDARD PACKAGE
• Individually boxed with mounting screws. Includes
mounting clips and adhesive shims for use where welded
tabs are omitted.
OPTIONS
• Available with two monitoring signal switches which sense
whether latchbolt is in strike and whether strike jaw is
blocked. Choice of voltage in AC and DC for intermittent or
continuous duty. Assembled for fail-secure (locked when
unpowered) operation.
7270 FIRE-RATED ELECTRIC STRIKES
7270 Fire-Rated Electric Strikes with 4-7/8" faceplates are
designed for mortise or cylindrical locksets with up to 3/4"
latchbolt projection without a deadbolt. For use in hollow
metal door jambs.
Function
Remote electrical control of any door equipped with a mortise or cylindrical
type lockset with up to 3/4" latchbolt projection, without a deadbolt. Electrical
actuation unlocks strike jaw, releasing latchbolt so door can be opened
without operating latch itself. Extremely compact mechanism fits into jamb
sections as shallow as 1-7/8". Fire-rated in fail-secure mode.
F
ITS STANDARD
MOUNTING
TAB ANSI PREP
3/32"
2.4mm
All 3/4" throw latches
require 1/8" minimum
door gap. Horizontal center
line of strike must match line
of mortise latchbolt.
HOLLOW
METAL
UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
FIRE RATED
 HOUR
GRADE 1
E09321
ELECTRIC STRIKES ES-15
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
7270 FIRE-RATED ELECTRIC STRIKES
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Power
4603 Rectifier, 4605/4606 Transformer, Piezo Horn audible indicator, PS-1.
Dimensions Installation in Steel Jamb
20°
“A”
PRESSURE
SENSITIVE
SPACER
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
12-24
(2 PLCS.)
1/4"
6.4mm
1"
25.4mm
1-1/8"
28.6mm
1-9/16"
39.7mm
1-1/2"
38.1mm
27/32"
21.4mm
1-13/16"
46mm 1"
25.4mm
VERTICAL OF DEADLATCH
MOUNTING SCREWS IN SAME
PLANE AS ELECTRIC STRIKE
MOUNTING SCREWS
HORIZONTAL OF
STRIKE SAME AS
HORIZONTAL
OF LATCHBOLT
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
1/8"
3.2mm
MOUNTING BRACKET (MOUNTING
CLIP) WELDED TO JAMB
(OR PROVIDED)
1-1/4"
31.8mm
27/32"
21.4mm
“A”
JAMB
EDGE
1-1/4"
31.8mm 3/32"
2.4mm
4-1/8"
104.8mm
4-7/8"
123.8mm
3-3/8"
85.7mm
3-3/8"
85.7mm
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
(SEE HOW TO ORDER)
MOUNTING BRACKETS FURNISHED
HOW TO ORDER 7270 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES FINISH LIP EXTENSIONS (DIM. A)
Door Centerline to Jam Edge for Interior Frames
7270 -3 1 0 -630 -50
3 12 Volt 1 DC Continuous or Intermittent 0 Fail-Secure* 630 Satin Stainless 00 1-1/16" or less
5 24 Volt 4 AC Intermittent 9 Monitor/Fail-Secure 50 1-3/8"
*Not available Fail-Safe
ES-16 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Ultraline
7400, 7401
Electric Strikes
Specifications
FAIL-SAFE/FAIL-SECURE
• Field selectable at time of installation.
CASE
• Approximately 1" x 3-3/8" x 1-1/16" deep.
STRIKE LIP
• Basic 7400 electric strike has lip of proper length for 1-3/4"
thick door that closes flush with jamb edge. Where door
thickness or jamb shape differs from this configuration, lip
extension kits are available. Not available on 7401.
STRIKE OPENING
• 5/8" adjustable x 1-7/16" x 1/2" deep. Bolt retainer jaw is
stainless steel. Strike accepts bolt of Adams Rite 4500, 4700
(discontinued), or 4900 Deadlatch or cylindrical latches.
FACEPLATE
• Measures 1-1/4” x 4-7/8”. 7400 has flat faceplate; 7401
is radiused to match nose on inactive leaf in a pair of
aluminum stile glass doors. Available in a wide range of
architectural finishes.
VOLTAGE
• Field selectable to match power source of 12, 16, or 24
VAC/VDC.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 0.163 0.440
16 0.228 0.458*
24 0.084 0.230
*Requires 16 DC adapter (P/N VA 7400-16VDC)
STANDARD PACKAGE
• Individually boxed with mounting screws, mounting tabs,
adhesive shims to accommodate jamb or stile extrusion
thickness greater or less than nominal 1/8", an adjustable
jaw shim pack and two plug-in voltage adapters for
12/16/24 VAC and 12/24 VDC.
OPTIONS
• Monitoring – Two internally mounted switches (Form “C") to
indicate when the latchbolt is engaged in the strike jaws and a
locked/unlocked solenoid status.
• Lip Extension Kits – For various dimensions of door centerline
to jamb edge.
• Modular Packaging – Consult factory or sales representative
for details.
• ELX-ElectroLynx™ Adapter – Connects Adams Rite electrified
products to ElectroLynx system.
• 16 VDC Adapter – VA7400-16VDC required when using
16 VDC power.
ULTR A LINE
7400, 7401 ELECTRIC STRIKES
7400, 7401 Electric Strikes with 4-7/8" faceplates are
designed for Adams Rite deadlatches or cylindrical locksets
with 1/2" to 5/8" latchbolt projection. For use in aluminum
jambs and stiles. Opens electrically under 35 lbs. of preload.
Function
Remote electrical control of any door equipped with an Adams Rite 4500,
4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type
lockset with 1/2" to 5/8" latchbolt projection. Electrical actuation unlocks strike jaw,
releasing latchbolt so door can be opened without operating latch itself. Extremely
compact mechanism fits into aluminum jamb (or opposing door) sections as
shallow as 1-1/16". Direct upgrade for Adams Rite 7100 Electric Strikes.
This non-handed strike features an ultra-compact design and an adjustable
stainless steel split-jaw with 1500 lbs. of holding force in fail-secure mode. The
strike releases electrically with up to 35 lbs. of door “preload" (pressure exerted
on doors by air conditioning systems, warping or misaligned hardware which can
disable common electric strikes). Single solenoid operates on 12, 16, or 24 volt AC/
DC power. Strikes are equipped with a quick connect plug-in type connector.
ALUMINUM UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
Using jaw inserts of various sizes,
the Ultraline 7400 Series electric
strikes are adjustable to compensate
for door and frame related preload
and security problems.
ELECTRIC STRIKES ES-17
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ULTR A LINE
7400, 7401 ELECTRIC STRIKES
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions.
ELX-ElectroLynx™ Adapter.
VA7400-16VDC Adapter.
4603 Rectifier, 4605/4606 Transformer,
Piezo Horn audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.
Dimensions
RADIUS FACE
OF 7401
JAMB
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
PRESSURE
SENSITIVE
SPACER
MOUNTING
TAB
PRESSED
METAL NUT
(2 REQD.)
JAMB
12-24 COMBINATION
SCREW (2 REQD.)
8-32 X 3/8 FLAT HEAD SCREW
(2 REQD.)
1-1/4"
31.8mm
3/32"
2.4mm
1-1/16"
27mm
1-11/16"
42.9mm
1-21/32"
42.1mm
4-1/8"
104.8mm
3-3/8"
85.7mm 3-3/8"
85.7mm
4-7/8"
123.8mm
“A”
1-13/32"
35.7mm
1-1/4"
31.8mm
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
MOUNTING BRACKETS FURNISHED
“A”
DRILL & CSK
FOR 8-32 SCREWS
(2 PLACES)
VERTICAL OF ELECTRIC
STRIKE FACEPLATE
DIRECTLY OPPOSITE
OF DEADLATCH
R
(4 PLACES)
5/32"
4mm
3-3/8"
85.7mm
6-1/8"
155.6mm
4-7/8"
123.8mm
1-7/16"
36.5mm
21/32"
16.7mm
CYLINDER
OF ADAMS
RITE LATCH
HORIZONTAL
OF ELECTRIC
STRIKE AND
LATCHBOLT
Jamb Preparation
Installation
HOW TO ORDER 7400, 7401 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE
SHAPE FEATURES FINISH
740 0 M 628
0 Flat - None STANDARD FINISHES 629 Bright Stainless
1 Radius M Monitored 313 Dark Bronze Anodized 630 Satin Stainless
A Modular Pack - Body Kit* 335 Black Anodized RITECOAT FINISH (7401 ONLY)
605 Bright Brass 119 To match 335 Black Anodized
606 Satin Brass 121 To match 313 Dark Bronze Anodized
612 Satin Bronze 130 To match 628 Clear Anodized
628 Clear Anodized
Fail-secure can be field converted to fail-safe or vice-versa
*Modular Packing Program - match body kit with faceplate kit to complete. Use 7400A for standard jambs and 7401A for radius stile mounting.
No finish designation required.
ES-18 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Ultraline
7410, 7411
Electric Strikes
Specifications
FAIL-SAFE/FAIL-SECURE
• Field selectable at time of installation.
CASE
• Approximately 1" x 3-3/8" x 1-1/16" deep.
STRIKE LIP
• Basic 7400 electric strike has lip of proper length for
1-3/4" thick door that closes flush with jamb edge. Where
door thickness or jamb shape differs from this standard
relationship, lip extension kits are available.
STRIKE OPENING
• 5/8" adjustable x 1-7/16" x 1/2" deep. Bolt retainer jaw is
stainless steel. Strike accepts bolt of Adams Rite 4500, 4700
(discontinued), or 4900 Series Deadlatch or cylindrical latches.
FACEPLATE
• 7410 faceplate measures 1-7/16” x 7-15/16”. 7411
faceplate measures 10-1/4”. Available in a wide range of
architectural finishes.
VOLTAGE
• Field selectable to match power source of 12, 16, or
24 VAC/VDC.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 0.163 0.440
16 0.228 0.458*
24 0.084 0.230
*Requires 16 DC adapter (P/N VA 7400-16VDC)
STANDARD PACKAGE
• Individually boxed with mounting screws, mounting tabs,
adhesive shims to accommodate jamb or stile extrusion
thickness greater or less than nominal 1/8", and adjustable
jaw shim pack and two plug-in voltage adapters for
12/16/24 VAC and 12/24 VDC.
OPTIONS
• Monitoring – Two internally mounted switches (Form “C") to
indicate when the latchbolt is engaged in the strike jaws and a
locked/unlocked solenoid status.
• Lip Extension Kits – For various dimensions of door centerline
to jamb edge.
• Modular Packaging – Consult factory or sales representative
for details.
• ELX-ElectroLynx™ Adapter – Connects Adams Rite
electrified products to ElectroLynx system.
• 16 VDC Adapter – VA7400-16VDC required when using
16 VDC power.
ULTR A LINE
7410, 7411 ELECTRIC STRIKES
7410 Electric Strike with 7-15/16" faceplate and 7411 Electric
Strike with 10-1/4" faceplate are designed for Adams Rite
deadlatches or cylindrical locksets with 1/2" to 5/8" latchbolt
projection. For use in hollow metal, wood and aluminum
door jambs. Opens electrically under 35 lbs. of preload.
Function
Replaces earlier 7510, 7810 electric strikes in either metal or wood jambs
for remote electrical control of any door equipped with an Adams Rite 4500,
4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever)
type lockset with 1/2" to 5/8" latchbolt projection. Electrical actuation unlocks
strike jaw, releasing latchbolt so door can be opened without operating latch
itself. Extremely compact mechanism fits into jamb sections as shallow as
1-1/16". Direct upgrade for Adams Rite 7110 Electric Strikes.
This non-handed strike features an ultra-compact design and an adjustable
stainless steel split-jaw with over 1500 lbs. of holding force in fail-secure
mode. The strike releases electrically with up to 35 lbs. of door “preload"
(pressure exerted on doors by air conditioning systems, warping or
misaligned hardware which can disable common electric strikes). Single
solenoid operates on 12, 16, or 24 volt AC/DC power. Strikes are equipped
with a quick connect plug-in type connector.
ALUMINUM HOLLOW
METAL
WOOD UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
Using jaw inserts of various sizes,
the Ultraline 7400 Series electric
strikes are adjustable to compensate
for door and frame related preload
and security problems.
ELECTRIC STRIKES ES-19
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
JAMB
“A”
VERTICAL OF
ELECTRIC STRIKE
SAME AS VERTICAL
OF LATCH
MOUNTING SCREWS
HORIZONTAL
OF STRIKE
SAME AS HORIZONTAL
OF LATCH BOLT
“A”
JAMB
12-24 COMBINATION
SCREW (2 REQD.)
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
ORDER LIP EXTENSION KITS REQUIRED
1-13/32"
35.7mm
1-1/16"
27mm
21/32"
16.7mm
1-25/32"
45.2mm
3/32"
2.4mm
1-7/16"
36.5mm
3-3/8"
85.7mm
3-3/8"
85.7mm
1-7/16"
36.5mm
1-7/16"
36.5mm
3/32"
2.4mm
1-3/8"
34.9mm
21/32"
16.7mm
3-3/8"
85.7mm
7410:
7-7/16"
188.9mm
7410:
7-15/16"
201.6mm
7411:
9-29/64"
240.1mm
7411:
10-1/4"
260.4mm
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
7410:
7-7/16"
188.9mm
7410:
7-15/16"
201.6mm
7411:
9-29/64"
240.1mm
7411:
10-1/4"
260.4mm
R
(4 PLACES)
5/32"
4mm
ULTR A LINE
7410, 7411 ELECTRIC STRIKES
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions.
ELX-ElectroLynx™ Adapter.
VA7400-16VDC Adapter.
4603 Rectifier, 4605/4606 Transformer, Piezo Horn
audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.
Dimensions Jamb Preparation
Installation
HOW TO ORDER 7410, 7411 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE LENGTH FEATURES FINISH
741 0 - 628
0 7-15/16" - None STANDARD FINISHES
1 10-1/4" M Monitored 313 Dark Bronze Anodized 628 Clear Anodized
335 Black Anodized 630 Satin Stainless
Fail-secure can be field converted to fail-safe or vice-versa
ES-20 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Ultraline
7430, 7431
Electric Strikes
Specifications
FAIL-SAFE/FAIL-SECURE
• Field selectable at time of installation.
CASE
• Approximately 1" x 3-3/8" x 1-1/16" deep.
STRIKE LIP
• Basic 7400 electric strike has lip of proper length for 1-3/4"
thick door that closes flush with jamb edge. Where door
thickness or jamb shape differs from this standard relationship,
lip extension kits are available. Not available on 7431.
STRIKE OPENING
• 5/8" adjustable x 1-7/16" x 1/2" deep. Bolt retainer jaw is
stainless steel. Strike accepts bolt of Adams Rite 4500, 4700
(discontinued), or 4900 Series Deadlatch or cylindrical latches.
FACEPLATE
• Measures 1-1/4” x 6-7/8”. 7430 has flat faceplate; 7431
is radiused to match nose on inactive leaf in a pair of
aluminum stile glass doors. Available in a wide range of
architectural finishes.
VOLTAGE
• Field selectable to match power source of 12, 16, or 24
VAC/VDC.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 0.163 0.440
16 0.228 0.458*
24 0.084 0.230
*Requires 16 DC adapter (P/N VA 7400-16VDC)
STANDARD PACKAGE
• Individually boxed with mounting screws, mounting tabs,
adhesive shims to accommodate jamb or stile extrusion
thickness greater or less than nominal 1/8", an adjustable
jaw shim pack and two plug-in voltage adapters for
12/16/24 VAC and 12/24 VDC.
OPTIONS
• Monitoring – Two internally mounted switches (Form “C") to
indicate when the latchbolt is engaged in the strike jaws and a
locked/unlocked solenoid status.
• Lip Extension Kits – For various dimensions of door centerline
to jamb edge.
• Modular Packaging – Consult factory or sales representative
for details.
• ELX-ElectroLynx™ Adapter – Connects Adams Rite
electrified products to ElectroLynx system.
• 16 VDC Adapter – VA7400-16VDC required when using
16 VDC power.
ULTR A LINE
7430, 7431 ELECTRIC STRIKES
7430, 7431 Electric Strikes with 6-7/8" faceplates are
designed for Adams Rite deadlatches or cylindrical
locksets with 1/2" to 5/8" latchbolt projection. For use
in aluminum jambs and stiles. Opens electrically under
35lbs. of preload.
Function
Remote electrical control of any narrow stile or hollow metal door equipped
with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or
cylindrical (key-in-knob/lever) type lockset with 1/2" to 5/8" latchbolt projection.
Large faceplate is designed to cover strike opening when converting from an
MS® pivoted-bolt deadlock to a deadlatch. Electrical actuation unlocks strike
jaw, releasing latchbolt so door can be opened without operating latch itself.
Extremely compact mechanism fits into jamb sections as shallow as 1-1/16".
Direct upgrade for Adams Rite 7130 Electric Strikes.
This non-handed strike features an ultra-compact design and an adjustable stainless
steel split-jaw with over 1500 lbs. of holding force in fail-secure mode. The strike
releases electrically with up to 35 lbs. of door “preload" (pressure exerted on doors
by air conditioning systems, warping or misaligned hardware which can disable
common electric strikes). Single solenoid operates on 12, 16, or 24 volt AC/DC
power. Strikes are equipped with a quick connect plug-in type connector.
ALUMINUM HOLLOW
METAL
UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
Using jaw inserts of various sizes,
the Ultraline 7400 Series electric
strikes are adjustable to compensate
for door and frame related preload
and security problems.
ELECTRIC STRIKES ES-21
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
RADIUS FACE
OF 7431
JAMB
PRESSURE
SENSITIVE
SPACER
MOUNTING
CLIP
PRESSED
METAL NUT
(2 REQD.)
JAMB
SEE DETAIL A
12-24 COMBINATION
SCREW (2 REQD.)
8-32 X 3/8
FLAT HEAD
SCREW
(2 REQD.)
“A” DRILL & CSK
FOR 8-32 FLAT
HEAD SCREWS
(2 PLACES)
VERTICAL OF
ELECTRIC STRIKE
FACEPLATE DIRECTLY
OPPOSITE OF
DEADLATCH
HORIZONTAL OF
ELECTRIC STRIKE
HORIZONTAL
OF CYLINDER
(A-R 4500)
SERIES DEADLATCH
1-13/32"
35.7mm
1-1/16"
27mm
21/32"
16.7mm
1-11/16"
42.9mm
3-3/8"
85.7mm
3-3/8"
85.7mm
3-3/8"
85.7mm 8-1/8"
206.4mm
6-7/8"
174.6mm
1-1/4"
31.8mm
1-7/16"
36.5mm
21/32"
16.7mm
6-1/8"
155.6mm
6-7/8"
174.6mm
1-1/4"
31.8mm
STANDARD UNIT FITS DIM. “A” 1-1/16"
MOUNTING BACKSETS FURNISHED
“A”
3/32"
2.4mm
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
R
(4 PLACES)
5/32"
4mm
ULTR A LINE
7430, 7431 ELECTRIC STRIKES
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions.
ELX-ElectroLynx™ Adapter.
VA7400-16VDC Adapter.
4603 Rectifier, 4605/4606 Transformer, Piezo
Horn audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch
is discontinued and replaced by 4900 Deadlatch.
Dimensions Jamb Preparation
Installation
HOW TO ORDER 7430, 7431 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE SHAPE FEATURES FINISH
743 0 M 628
0 Flat - None STANDARD FINISHES RITECOAT FINISH (7431 ONLY)
1 Radius M Monitored 313 Dark Bronze Anodized 119 To match 335 Black Anodized
335 Black Anodized 121 To match 313 Dark Bronze Anodized
628 Clear Anodized 130 To match 628 Clear Anodized
Fail-secure can be field converted to fail-safe or vice-versa
ES-22 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Ultraline
7440 Electric Strikes
Specifications
FAIL-SAFE/FAIL-SECURE
• Field selectable at time of installation.
CASE
• Approximately 1" x 3-3/8" x 1-1/16" deep.
STRIKE LIP
• Basic 7400 electric strike has lip of proper length for
1-3/4" thick door that closes flush with jamb edge. Where
door thickness or jamb shape differs from this standard
relationship, lip extension kits are available.
STRIKE OPENING
• 5/8" adjustable x 1-7/16" x 1/2" deep. Bolt retainer jaw
is stainless steel. Strike accepts bolt of Adams Rite 4500,
4700 (discontinued), or 4900 Series Deadlatch
or cylindrical latches.
FACEPLATE
• Measures 1-1/4” x 4-7/8”. Faceplate is flat, with square
corners. Available in a wide range of architectural finishes.
VOLTAGE
• Field selectable to match power source of 12, 16, or 24
VAC/VDC.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 0.163 0.440
16 0.228 0.458*
24 0.084 0.230
*Requires 16 DC adapter (P/N VA 7400-16VDC)
STANDARD PACKAGE
• Individually boxed with mounting screws, mounting tabs,
adhesive shims to accommodate jamb or stile extrusion
thickness greater or less than nominal 1/8", and adjustable
jaw shim pack and two plug-in voltage adapters for 12/16/24
VAC and 12/24 VDC.
OPTIONS
• Monitoring – Two internally mounted switches (Form “C") to
indicate when the latchbolt is engaged in the strike jaws and
a locked/unlocked solenoid status.
• Lip Extension Kits – For various dimensions of door centerline
to jamb edge.
• Modular Packaging – Consult factory or sales representative
for details.
• Wood Door Cover – WDC7400 for use when mounting the 7400
Series Electric Strike on the inactive leaf of a pair of door. The
cover simplifies the mortise prep.
• ELX-ElectroLynx™ Adapter – Connects Adams Rite electrified
products to ElectroLynx system.
• 16 VDC Adapter – VA7400-16VDC required when using 16
VDC power.
ULTRALINE 7440 ELECTRIC STRIKES
Function
Remote electrical control of any door equipped with an Adams Rite 4500, 4700,
or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type
lockset with 1/2" to 5/8" latchbolt projection. Electrical actuation unlocks strike
jaw, releasing latchbolt so door can be opened without operating latch itself.
Extremely compact mechanism fits into jamb sections as shallow as 1-1/16".
Direct upgrade for Adams Rite 7140 Electric Strikes.
This non-handed strike features an ultra-compact design and an adjustable
stainless steel split-jaw with over 1500 lbs. of holding force in fail-secure mode.
The strike releases electrically with up to 35 lbs. of door “preload" (pressure
exerted on doors by air conditioning systems, warping or misaligned hardware
which can disable common electric strikes). Single solenoid operates on 12,
16, or 24 volt AC/DC power. Strikes are equipped with a quick connect plug-in
type connector.
WOOD HOLLOW
METAL
UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
7440 Electric Strikes with 4-7/8" faceplate are designed for
Adams Rite deadlatches or cylindrical locksets with 1/2" to
5/8" latchbolt projection. For use in hollow metal or wood
door jambs and steel or wood doors. Opens electrically
under 35lbs. of preload.
Using jaw inserts of various sizes,
the Ultraline 7400 Series electric
strikes are adjustable to compensate
for door and frame related preload
and security problems.
ELECTRIC STRIKES ES-23
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ULTRALINE 7440 ELECTRIC STRIKES
Dimensions
MOUNTING BRACKET
WELDED TO JAMB
12-24 COMBINATION
SCREW (2 REQD.)
VERTICAL
OF ELECTRIC
STRIKE FACEPLACE
DIRECTLY OPPOSITE
OF DEADLATCH
HORIZONTAL
OF CYLINDER
(A-R 4500 & 4700
SERIES DEADLATCHES)
HORIZONTAL OF
ELECTRIC STRIKE
PRESSURE
SENSITIVE
SPACER
12-24
(2 PLACES)
“A”
1-1/16"
27mm
1-11/16"
42.9mm
21/32"
16.7mm
1-13/32"
35.7mm
1-1/4"
31.8mm
3/32"
2.4mm
4-1/8"
104.8mm
3-3/8"
85.7mm 4-7/8"
123.8mm
JAMB
STANDARD UNIT FITS DIM. “A” UP TO 1-1/16"
MOUNTING BRACKETS FURNISHED
“A”
3-3/8"
85.7mm
JAMB
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
MOUNTING BRACKET
(MOUNTING CLIP)
WELDED TO JAMB OR
PROVIDED
3-3/8"
85.7mm
1-7/16"
36.5mm
4-1/8"
104.8mm
4-7/8"
123.8mm
3-5/8"
92.1mm
21/32"
16.7mm
1-1/4"
31.8mm
Jamb Preparation
Installation
HOW TO ORDER 7440 ELECTRIC STRIKE Specify quantity and the following information. Order related products separately.
PRODUCT NO. FEATURES FINISH
7440 M628
- None STANDARD FINISHES
M Monitored 313 Dark Bronze Anodized 612 Satin Bronze
335 Black Anodized 628 Clear Anodized
605 Bright Brass 629 Bright Stainless
606 Satin Brass 630 Satin Stainless
Fail-secure can be field converted to fail-safe or vice-versa.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power Deadlatches
Lip extensions.
WDC7400-Wood Door Cover.
ELX-ElectroLynx™ Adapter.
VA7400-16VDC Adapter.
4603 Rectifier, 4605/4606 Transformer,
Piezo Horn audible indicator, PS-1.
4500 and 4900 Series Deadlatches. Note that 4700 Deadlatch is
discontinued and replaced by 4900 Deadlatch.
ES-24 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Ultraline
74R1 Electric Strike
Specifications
FAIL-SAFE/FAIL-SECURE
• Field selectable at time of installation.
CASE
• Approximately 1" x 3-3/8" x 1-1/16" deep.
MOUNTING PLATE/HOUSING
• Made of zinc aluminum alloy and measures 1-3/4" x 9" x
11/16" deep. Standard finish in epoxy to match Clear, Dark
Bronze Anodized and Black Anodized finishes.
STRIKE OPENING
• 5/8" x 1-7/16" x 9/16" deep. Bolt retainer jaw is stainless
steel. Strike accepts Pullman bolt of exit devices without
deadlocking bolts.
VOLTAGE
• Field selectable to match power source of 12, 16, or 24
VAC/VDC.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 0.163 0.440
16 0.228 0.458*
24 0.084 0.230
*Requires 16 DC adapter (P/N VA 7400-16VDC)
STANDARD PACKAGE
• Individually boxed with mounting plate shims, mounting
screws, and installation instructions. Shipping weight
approximately 2 lbs.
OPTIONS
• Monitoring – Two internally mounted switches (Form “C") to
indicate when the latchbolt is engaged in the strike jaws and a
locked/unlocked solenoid status.
• ELX-ElectroLynx™ Adapter – Connects Adams Rite electrified
products to ElectroLynx system.
• 16 VDC Adapter – VA7400-16VDC required when using 16
VDC power.
ULTRALINE 74R1 ELECTRIC STRIKE
Function
A semi-mortised strike for rim exit devices having 3/4" Pullman type bolts
without auxiliary bolts. Provides electrical remote control, allowing door to open
without actuation of the exit device.
This non-handed strike features an ultra-compact design and a stainless steel
split-jaw with over 1500 lbs. of holding force in fail-secure mode. The strike
releases electrically with up to 35 lbs. of door “preload" (pressure exerted on
doors by air conditioning systems, warping or misaligned hardware which can
disable common electric strikes). Single solenoid operates on 12, 16, or 24 volt
AC/DC power. Strikes are equipped with a quick connect plug-in type connector.
74R1 Electric Strike is designed for rim exit devices with
3/4" Pullman type latchbolt. For use in hollow metal, wood
and aluminum door jambs. Opens electrically under 35lbs.
of preload.
ALUMINUM HOLLOW
METAL
WOOD UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
ELECTRIC STRIKES ES-25
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
#12 X 5/8
PHIL PAN HD
SELF TAP
SCREW
Ø 3/16 DRILL
1-17/32"
38.9mm
1-27/64"
36.1mm
7/32"
5.6mm
1-41/64"
41.7mm
1/4"
6.4mm
1/8"
3.2mm
11/16"
17.5mm
3-3/8"
85.7mm
8-1/4"
209.6mm
9"
228.6mm
7/8"
22.2mm
8-1/4"
209.6mm
4-1/2"
114.3mm
1-5/8"
41.3mm
15/16"
23.8mm
2-1/4"
57.2mm
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
ULTRALINE 74R1 ELECTRIC STRIKE
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power
ELX-ElectroLynx™ Adapter.
VA7400-16VDC Adapter.
4603 Rectifier, 4605/4606 Transformer, Piezo Horn audible indicator, PS-1.
Dimensions Jamb Preparation
Installation
HOW TO ORDER 74R1 ELECTRIC STRIKE
Specify quantity and the following information.
Order related products separately.
PRODUCT NO. FEATURES FINISH
74R1 M-130
- None 119 To match 335 Black Anodized
M Monitored 121 To match 313 Dark Bronze Anodized
130 To match 628 Clear Anodized
Fail-secure can be field converted to fail-safe or vice-versa.
ES-26 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Ultraline
74R2 Electric Strike
Specifications
FAIL-SAFE/FAIL-SECURE
• Field selectable at time of installation.
CASE
• Approximately 1" x 3-3/8" x 1-1/8" deep.
STRIKE OPENING
• Bolt retainer jaw is stainless steel, measures 5/8" x 1-7/16"
x 1/2" deep.
MOUNTING PLATE/HOUSING
• Made of zinc aluminum alloy and measure 1-5/8" x 9" x
1/2" deep. Standard finish in epoxy to match Clear, Dark
Bronze Anodized and Black Anodized finishes.
VOLTAGE
• Field selectable to match power source of 12, 16, or 24
VAC/VDC.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 0.163 0.440
16 0.228 0.458*
24 0.084 0.230
*Requires 16 DC adapter (P/N VA 7400-16VDC)
STANDARD PACKAGE
• Individually boxed with mounting plate shims, mounting
screws, and installation instructions. Shipping weight
approximately 2 lbs.
OPTIONS
• ELX-ElectroLynx™ Adapter – Connects Adams Rite electrified
products to ElectroLynx system.
• 16 VDC Adapter – VA7400-16VDC required when using 16
VDC power.
ULTRALINE 74R2 ELECTRIC STRIKE
74R2 Electric Strike is designed for narrow stile rim exit
devices with 1/2" Pullman type latchbolt. For use in aluminum
door jambs. Opens electrically under 35lbs. of preload.
Function
A semi-mortised strike for rim exit devices having 1/2" Pullman type bolts.
Provides electrical remote control, allowing door to open without actuation
of the exit device.
This non-handed strike features an ultra-compact design and a stainless steel
split-jaw with over 1500 lbs. of holding force in fail-secure mode. The strike
releases electrically with up to 35 lbs. of door “preload" (pressure exerted on
doors by air conditioning systems, warping or misaligned hardware which can
disable common electric strikes). Single solenoid operates on 12, 16, or 24 volt
AC/DC power. Strikes are equipped with a quick connect plug-in type connector.
ALUMINUM UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
ELECTRIC STRIKES ES-27
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
INSIDE FACE OF
CLOSED DOOR
PRESSURE
SENSITIVE
SPACER
#12 X 5/8
PAN HEAD
SELF TAPPING
SCREW,
TYPE AB
9-1/16
REMOVE
STOP
MATERIAL
TO CLEAR
FACEPLATE
1-5/8"
41.3mm
1-5/8"
41.3mm
5/32"
4mm
1/2"
12.7mm
1-19/32"
40.5mm
3-3/8"
85.7mm
8-1/4"
209.6mm
8-1/4"
209.6mm
7/8"
22.2mm
7/8"
22.2mm
1-5/8"
41.3mm
4-1/2"
114.3mm
9"
228.6mm
TURN STRIKE
UPSIDE DOWN
FOR OPPOSITE HAND
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
ULTRALINE 74R2 ELECTRIC STRIKE
Dimensions Jamb Preparation
Installation
HOW TO ORDER 74R2 ELECTRIC STRIKE
Specify quantity and the following information.
Order related products separately.
PRODUCT NO. FINISH
74R2 -130
119 To match 335 Black Anodized
121 To match 313 Dark Bronze Anodized
130 To match 628 Clear Anodized
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Options Power
ELX-ElectroLynx™ Adapter.
VA7400-16VDC Adapter.
4603 Rectifier, 4605/4606 Transformer, Piezo Horn audible indicator, PS-1.
ES-28 ELECTRIC STRIKES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Options &
Accessories for
Electric Strikes
Lip Extension Kits for
7100 Series Electric Strikes
Lip extensions are for center hung doors, thick doors, or other conditions that vary
from the “standard” 1-3/4" thick door that closes flush (or near flush) with the jamb
face. Specified with electric strike by the last dash number which varies the door
centerline to jamb edge dimension in 1/8” increments. For existing 7100 Series
Electric Strikes, a thin metal membrane in the standard lip can be drilled or punched
out and the lip extension can be added in the field. The dash number for lip extension
is the same as door centerline to jamb edge dash number on complete strike.
7100 LIP EXTENSION
LIP EXTENSION PART NUMBER APPLICABLE ELECTRIC STRIKES
91-0171-01 through -13 7100, 7110, 7111, 7130, 7140
91-0172-01 through -13 7160, 7170
91-0173-01 through -13 7108, 7128
7100 LIP EXTENSION DIMENSIONS
DASH PART
NUMBER
DIMENSION ‘A’ –
DOOR CENTERLINE
TO JAMB EDGE
DASH PART
NUMBER
DIMENSION ‘A’ –
DOOR CENTERLINE
TO JAMB EDGE
-00 1-1/16” -07 2-1/4”
-01 1-1/2” -08 2-3/8”
-02 1-5/8” -09 2-1/2”
-03 1-3/4” -10 2-5/8”
-04 1-7/8” -11 2-3/4”
-05 2” -12 2-7/8”
-06 2-1/8” -13 3”
1-1/16" or less does not require a lip extension.
Lip extensions for fire-rated 7200 Series Electric Strikes must be factory installed.
Lip Extension Kits for Ultraline
7400 Series Electric Strikes
Lip extensions are for center hung doors, thick doors, or
other conditions that vary from the “standard” 1-3/4" thick
door that closes flush (or near flush) with the jamb face. Lip
extension kits are available in 1/8" increments.
7400 LIP EXTENSION
PART NUMBER DIMENSION ‘A’ – DOOR
CENTERLINE TO JAMB EDGE
LEK7400-50 1-3/8"
LEK7400-01 1-1/2"
LEK7400-02 1-1/16"
LEK7400-03 1-3/4"
LEK7400-04 1-7/8"
LEK7400-05 2"
LEK7400-06 2-1/8"
LEK7400-07 2-1/4"
LEK7400-08 2-3/8"
LEK7400-09 2-1/2"
LEK7400-10 2-5/8"
LEK7400-11 2-3/4"
LEK7400-12 2-7/8"
LEK7400-13 3"
1-1/16" or less does not require a lip extension.
OPTIONS & ACCESSORIES FOR ELECTRIC STRIKES
LIP EXTENSION
EXTENSION
WDC7400*
7400 ASSEMBLY
JAMB
“A”
WDC7400
*THE SPACER IS
DESIGNED TO
SIMPLIFY MORTISING
ON WOOD DOOR
APPLICATIONS
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ELECTRIC STRIKES ES-29
Power
4603 RECTIFIER
Converts low voltage AC current to DC of same
voltage. Installs in low voltage line between
transformer and strike. Full wave bridge type.
Rated 2 amps (200 PIV).
29-0218 PIEZO HORN
Provides for audible indication of when
a DC strike is energized. Operates with
12 VDC, 16 VDC, or 24 VDC strikes.
TRANSFORMERS
4605
Converts 120 VAC to 12/24 VAC. Rated 40 Volt-amp output assures
plenty of power for strike release.
4606
Converts 120 VAC current to 24 VAC. Plugs into standard wall outlet.
PS-1 POWER SUPPLY
Provides filtered and regulated voltage output to power electric strikes,
magnetic locks, or other access control devices. Output is selectable in the
field for 12 or 24 VDC. Charging circuit is built-in for battery backup power
with 12 or 24 VDC operation. LED on circuit board indicates power input.
WDC7400 Wood Door Application
For use with Ultraline 7400 Electric Strikes only, this cover plate is
designed to simplify mortising of wood door pairs.
Monitor Switches
If a visual or other signal is required to tell an operator what the
electric strike is doing, a “monitoring” strike to switch that signal on
and off is required.
This feature utilizes two sensor switches: one is activated by the
latchbolt’s penetration of the strike and the other by the mechanism
that blocks the strike’s release.
These switches can also be used to interconnect two strikes in
“mantrap” or interlock situations, such as elevator doors. In these
cases, power to the solenoid of each strike is controlled by the
switch(es) of the other so one will not unlock unless the other is
locked. Each switch has both normally open and normally closed
leads to they can be wired to either make or break a circuit.
OPTIONS & ACCESSORIES FOR ELECTRIC STRIKES
4605 4606
115 VAC LINE
BLAC
KB
LACK
WHITE
LIGHT
COIL
NOCNOC
NC
NC
WIRE LEAD
ACTUATING
SWITCH
WIRE LEAD LIGHT
RED
STRIKE JAW
LOCKED
BOLT SENSOR
(DEPRESSED)
#4605 TRANSFORMER
(40 VA OR EQUIVALENT 125 VA MINIMUM)
#4603 RECTIFIER
(REQUIRED FOR AC RECTIFIED SILENT OPERATION ONLY )
LIP EXTENSION
EXTENSION
WDC7400*
7400 ASSEMBLY
JAMB
“A”
WDC7400
*THE SPACER IS
DESIGNED TO
SIMPLIFY MORTISING
ON WOOD DOOR
APPLICATIONS
ES-30 ELECTRIC STRIKES
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The 1000 Turns are designed to operate Adams Rite
MS1847 Deadlocks and the 5017 Wood Door Deadlock.
1000 Turns
Function
1000 Turns are designed to operate Adams Rite MS®1847 Deadlocks and 5017
Wood Door Deadlock. 1000-11 and 1000-21 have a rectangular escutcheon for
mounting directly on door. 1000-01 and 1000-02 are without escutcheon, designed
for easy push-nut mounting to door pull or other trim plate.
Specifications
TURN LEVER
• Zinc alloy. Trim finish RC130.
ESCUTCHEON
• Stainless Steel. Trim finish in RC130.
SPINDLES
• Hardened steel, plated for corrosion resistance. First
dash number in order guide indicates spindle parallel
or perpendicular to turn level (turn drawings on back).
Second dash number indicates spindle length “L” (see
dash table on back).
1004 TURN
• 1004 Turn has a longer, more ergonomically-friendly
turn lever.
1015 TURN
• Available with 1016 blank plate for doors from 5/8"
to 2-1/4"thickness. Without blank plate turn available
(for use with cylinder pull) on doors from 7/16" to 2"
thickness. Standard finish 130, Satin Aluminum enamel.
Turn 1015 for use with 5017 lock is designed for wood
door applications.
OPTIONS
• The availability of both perpendicular and parallel drives
in these turns, coupled with the three hub drive positions
of the MS1847 lock, provides several options. Choice of
turn drive position relates directly to the particular lock hub
drive position. Special care in specifying both the proper
turn and lock in ordering is recommended. Chart on the
back of page shows turn positions relative to lock hub
positions. Broken line indicates direction of travel (45°) to
retract bolt (see chart below).
STANDARD PACKAGE
• Individually packaged. -21 and-11 assembled, with
escutcheon. -01 and -02, unassembled, include turn,
spindle, washer and push nut for assembly on the door
pull plate. Shipping weight: 1/16 lb.
1000 TURNS
1000
1000
-01
-02
-11
-12
OF LOCK
TO FACE OF LOCK
DOOR PULL
DOOR PULL
DOOR PULL PUSH
NUT
HOLE IN DOOR
PULL REQUIRED
WASHER
SPINDLE
TURN
TURN
MAX.
HOLES FOR
#6 FLAT HEAD SCREW
(2 PLCS., SCREWS
NOT FURNISHED)
LOCK
HUB
ESCUTCHEON
OR DOOR PULL
*SPINDLE LENGTH
CSK FOR
#6 FLAT
HEAD
SCREW
PERPENDICULAR
DRIVE MS1847-09 MS1847-06 MS1847-02
PARALLEL
DRIVE MS1847-10 MS1847-13 MS1847-11
L*
L*
L*
“A”
“B”
“B”
L* = A + B
L* = A +
“L”
“A”
5/8"
15.9mm
5/16"
7.9mm
5/32"
4mm
1/4"
6.4mm
3/32"
2.4mm
7/16"
11.1mm
1-1/4"
31.8mm
1-1/4"
31.8mm 1"
25.4mm
3/32"
2.4mm
NOTE: 9/32"
7.1mm
3/8"
9.5mm
7/8"
22.2mm
15/32"
11.9mm
25/32"
19.8mm
5/8"
15.9mm
1/8"
3.2mm
5/32"
4mm
7/16"
11.1mm
1/4"
6.4mm
1-13/16"
46mm
1-5/16"
33.3mm
1/2"
12.7mm
1/4"
6.4mm
1/2"
12.7mm
23/32"
18.3mm
IF “B” DIMENSIONS EXCEEDS 1/4" C’BORE
BACK SIDE AS SHOWN TO FACILITATE
ASSEMBLY. C’BORE REQUIREMENT DOES NOT
AFFECT SPINDLE LENGTH DETERMINAION.
CLEARANCE HOLE FOR SPINDLE OPERATION.
THIS MUST LINE UP WITH HUB IN LOCK.
REFER TO INSTALLATION INSTRUCTIONS FOR
ADDITIONAL INFORMATION.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-1
OF LOCK
TO FACE OF LOCK
DOOR PULL
DOOR PULL
DOOR PULL PUSH
NUT
HOLE IN DOOR
PULL REQUIRED
WASHER
SPINDLE
TURN
TURN
MAX.
HOLES FOR
#6 FLAT HEAD SCREW
(2 PLCS., SCREWS
NOT FURNISHED)
LOCK
HUB
ESCUTCHEON
OR DOOR PULL
*SPINDLE LENGTH
CSK FOR
#6 FLAT
HEAD
SCREW
PERPENDICULAR
DRIVE MS1847-09 MS1847-06 MS1847-02
PARALLEL
DRIVE MS1847-10 MS1847-13 MS1847-11
L*
L*
L*
“A”
“B”
“B”
L* = A + B
L* = A +
“L”
“A”
5/8"
15.9mm
5/16"
7.9mm
5/32"
4mm
1/4"
6.4mm
3/32"
2.4mm
7/16"
11.1mm
1-1/4"
31.8mm
1-1/4"
31.8mm 1"
25.4mm
3/32"
2.4mm
NOTE: 9/32"
7.1mm
3/8"
9.5mm
7/8"
22.2mm
15/32"
11.9mm
25/32"
19.8mm
5/8"
15.9mm
1/8"
3.2mm
5/32"
4mm
7/16"
11.1mm
1/4"
6.4mm
1-13/16"
46mm
1-5/16"
33.3mm
1/2"
12.7mm
1/4"
6.4mm
1/2"
12.7mm
23/32"
18.3mm
IF “B” DIMENSIONS EXCEEDS 1/4" C’BORE
BACK SIDE AS SHOWN TO FACILITATE
ASSEMBLY. C’BORE REQUIREMENT DOES NOT
AFFECT SPINDLE LENGTH DETERMINAION.
CLEARANCE HOLE FOR SPINDLE OPERATION.
THIS MUST LINE UP WITH HUB IN LOCK.
REFER TO INSTALLATION INSTRUCTIONS FOR
ADDITIONAL INFORMATION.
OF LOCK
TO FACE OF LOCK
DOOR PULL
DOOR PULL
DOOR PULL PUSH
NUT
HOLE IN DOOR
PULL REQUIRED
WASHER
SPINDLE
TURN
TURN
MAX.
HOLES FOR
#6 FLAT HEAD SCREW
(2 PLCS., SCREWS
NOT FURNISHED)
LOCK
HUB
ESCUTCHEON
OR DOOR PULL
*SPINDLE LENGTH
CSK FOR
#6 FLAT
HEAD
SCREW
PERPENDICULAR
DRIVE MS1847-09 MS1847-06 MS1847-02
PARALLEL
DRIVE MS1847-10 MS1847-13 MS1847-11
L*
L*
L*
“A”
“B”
“B”
L* = A + B
L* = A +
“L”
“A”
5/8"
15.9mm
5/16"
7.9mm
5/32"
4mm
1/4"
6.4mm
3/32"
2.4mm
7/16"
11.1mm
1-1/4"
31.8mm
1-1/4"
31.8mm 1"
25.4mm
3/32"
2.4mm
NOTE: 9/32"
7.1mm
3/8"
9.5mm
7/8"
22.2mm
15/32"
11.9mm
25/32"
19.8mm
5/8"
15.9mm
1/8"
3.2mm
5/32"
4mm
7/16"
11.1mm
1/4"
6.4mm
1-13/16"
46mm
1-5/16"
33.3mm
1/2"
12.7mm
1/4"
6.4mm
1/2"
12.7mm
23/32"
18.3mm
IF “B” DIMENSIONS EXCEEDS 1/4" C’BORE
BACK SIDE AS SHOWN TO FACILITATE
ASSEMBLY. C’BORE REQUIREMENT DOES NOT
AFFECT SPINDLE LENGTH DETERMINAION.
CLEARANCE HOLE FOR SPINDLE OPERATION.
THIS MUST LINE UP WITH HUB IN LOCK.
REFER TO INSTALLATION INSTRUCTIONS FOR
ADDITIONAL INFORMATION.
1000 TURNS
HOW TO ORDER 1000 SERIES TURNS
Specify quantity and the following information. Order related products separately.
PRODUCT NO. TURN TYPE SPINDLE LENGTH RITECOAT FINISH
1000 -21 -14 -130
See TURN TYPE drawings
(right side)
See DASH CHART
(above)
119 To match 335 Black Anodized
121 To match 313 Dark Bronze Anodized
130 To match 628 Clear Anodized
TURN WITHOUT ESCUTCHEON
FURNISHED UNASSEMBLED
1000-02
PERPENDICULAR DRIVE
1000-01
PARALLEL DRIVE
TURN WITH ESCUTCHEON
FURNISHED ASSEMBLED
1000-21
PERPENDICULAR DRIVE
1000-11
PARALLEL DRIVE
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks
MS1847 Deadlock. 5017 Wood Door Deadlock.
DASH -01 or -02
DASH -11 or -21
Installation
DASH CHART
NO. " L" MM NO. " L" MM NO. " L" MM NO. " L" MM
-11 17/32 13 -17 59/64 23 -23 1-19/64 33 -29 1-43/64 42
-12 39/64 15 -18 63/64 25 -24 1-23/64 35 -30 1-47/64 44
-13 43/64 17 -19 1-3/64 26 -25 1-27/64 36 -31 1- 51/64 46
-14 47/64 19 -20 1-7/64 28 -26 1-31/64 38 -32 1-55/64 47
-15 51/6 4 20 -21 1-11/ 64 30 -27 1-33/64 39
-16 55/64 22 -22 1-15/64 31 -28 1-39/64 41
Tur n Type
DimensionsDimensions
Dash Chart
Stile Preparation
T-2 TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
3001 3002
11-1/2"
292.1mm
11-1/2"
292.1mm
2-3/4"
69.9mm
2-3/4"
69.9mm
2-5/16"
58.7mm
2-1/32"
51.6mm
The 3080 Series Entry Trim provides outside activation for
doors with any type of Adams Rite exit device. The locked
handle is protected from vandalism and forced entry with a
breakaway clutching mechanism
3080 Series
Entr y Trim
3001 & 3002 Fixed Pulls
US32D Satin Stainless Steel pulls have 2-3/4" x 11-1/2" escutcheon.
Order with or without cylinder hole. For hollow metal and wood doors only.
3080 Series Entry Trim
Function
The 3080 Series provides outside activation of doors that have any type of Adams
Rite Exit Device. Breakaway clutching mechanism protects the locked handle
from vandalism or forced entry, in either direction. All models share the same core
components, so handles can be changed without having to replace the entire trim.
Solid construction meets Grade 1 standards.
3080E Electrified Entry Trim
Function
The 3080E Electrified Entry Trim provides a continuous duty
solenoid mounted to the trim, which enables remote activation
of the locking function without unlatching the door, making this
trim ideal for stairwell and fire doors.
Specifications
STANDARD HANDLES
• The 3080-01, -02, and -03 lever handles are designed to
return within 1/2" of the door face. Handles in the Designer
Series do not have this same feature. Please verify with
local code requirements to ensure compliance.
OPTIONS
• Can be ordered with or without a hole for cylinder. Order
standard mortise cylinder with MS® cam separately. Order
4603 Rectifier, 4605/4606 Transformer or PS-1 Power
Supply separately.
HOW TO ORDER 3080 ENTRY TRIM
Specify quantity and the following information. Order related products separately.
PRODUCT
NO. ELECTRIFIED HANDLE HANDING CYLINDER
HOLE EXIT DEVICE VOLTAGE FE ATURES
TRIM
COVER
FINISH
FINISH
3080 E-01 -0 -3 7-3 0 M US32D
(BLANK)
Standard
Standard
Handles
0 No Handing 3 With Hole 1 SVR Electrified
Trim Only
Electrified
Trim Only
- Standard
(Black) US3 Bright Brass
7 Right Hand* 9 Without Hole 3 Mortise M Matching
Finish US4 Satin Brass
E Electrified
Trim 01 Curve 8 Left Hand* 4 SCVR 3 12 Volt DC 0 Fail-
Secure
US10B Oil-Rubbed
Bronze
02 Round 6 CVR 5 24 Volt DC 5 Fail-Safe US32 Bright
Stainless
03 Square 7 Rim US32D Satin
Stainless
Designer
Series
U Universal Kit
MD MJ
ME MN* (Handed)
MG MV* (Handed)
MI MW
*Handing must be specified for MN and MV Designer Handles
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related products,
available separately:
This product is compatible with the following products:
Cylinder Power Deadlatches Exit Devices
3080 Entry Trim is operable
by any standard 1-5/32"
diameter mortise cylinder
with MS® cam.
4605/4606 Transformer, 4603
Rectifier, PS-1 Power Supply and
4612 Power Transfer Device, as
required for the 3080E electrified trim.
4300 Electrified Deadlatch.
4500 Series Standard
Duty Deadlatch.
4900 Series Heavy
Duty Deadlatch.
4781 Two-Point Deadlatch
(with paddle).
Adams Rite 8000 Series and
3000 Series Exit Devices
Dimensions
ELECTRIFIED
OPTION
STANDARD SERIES:
3001 3002
01-CURVE
MD MI
MV
02-ROUND
ME MJ
MW
03-SQUARE
MG MN
DESIGNER SERIES:
3080 SERIES ENTRY TRIM 3080 SERIES ENTRY TRIM
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-3
Dimensions
3080-01*
3080E-01*
3080-MD
3080E-MD
3080-MI
3080E-MI
3080-ME
3080E-ME
3080-02*
3080E-02*
3080-03*
3080E-03*
3080-MV**
3080E-MV**
3080-MG
3080E-MG
3080-MW
3080E-MW
3080-MJ
3080E-MJ
3080-MN**
3080E-MN**
1-29/32"
48.4mm
3-1/4"
82.6mm
5"
127mm
1-29/32"
48.4mm
1-29/32"
48.4mm
2-29/32"
73.8mm
4-11/32"
110.3mm
1-29/32"
48.4mm
1-29/32"
48.4mm
3-11/16"
93.7mm
3-19/32"
91.3mm
5-1/8"
130.2mm
4-5/16"
109.5mm
1-29/32"
48.4mm
3-5/16"
84.1mm
4-29/32"
124.6mm
1-29/32"
48.4mm
3-23/32"
94.5mm
5"
127mm
1-29/32"
48.4mm
3-5/8"
92.1mm
4-3/8"
111.1mm
1-29/32"
48.4mm
3-1/4"
82.6mm
4-3/16"
106.4mm
1-29/32"
48.4mm
3-5/8"
92.1mm
4-1/2"
114.3mm
1-29/32"
48.4mm
4"
101.6mm
4-11/16"
119.1mm
8-3/32"
205.6mm
8-3/32"
205.6mm
8-3/32"
205.6mm
8-3/32"
205.6mm
8-3/32"
205.6mm
8-3/32"
205.6mm
8-3/32"
205.6mm
8-3/32"
205.6mm
8-3/32"
205.6mm
8-3/32"
205.6mm
3-15/32"
88.1mm
4-9/16"
115.9mm
8-3/32"
205.6mm
CYLINDER
ESCUTCHEON
SPACER
CYLINDER
RETAINER RING
SOLENOID
ASSEMBLY*
FLAT HEAD
SCREWS (2 PLCS)*
#6-32 X 1/4"
ROTATION
LIMITING
PINS
* ELECTRIFIED TRIM ONLY
CYLINDER
ESCUTCHEON
SPACER
CYLINDER
RETAINER RING
SOLENOID
ASSEMBLY*
FLAT HEAD
SCREWS (2 PLCS)*
#6-32 X 1/4"
ROTATION
LIMITING
PINS
* ELECTRIFIED TRIM ONLY
Door Preparation & Trim Installation
Door prep and installation will differ depending on the type of exit device being used. Refer to the Adams
Rite templates for 3080 Entry Trim or 3080E Electrified Entry Trim for preparation details.
MORTISE CYLINDER – 4036-01
• Standard diameter five-pin unit with MS cam, suitable
for use with entry trim. Available in quantity all keyed
different (KD), in pairs (KA2), or 50 alike (KA50). Any
other make standard mortise cylinder with MS® cam
can be used to key-in with existing systems.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
CYLINDER CAM
• 3080 Series Entry Trim can accept
any standard 1-5/32" diameter mortise
cylinder with MS® cam dimensioned as
shown. Cylinders with MS® cams can
be readily obtained from most cylinder
manufacturers. See CYLINDERS for
cylinder make, thumbturn and trim
ring information.
* The 3080-01, -02, and -03 lever handles are designed to return within 1/2" of the door face. Handles in the Designer Series do
not have this same feature. Please verify with local code requirements to ensure compliance.
** Handed
T-4 TRIM
3080 SERIES ENTRY TRIM
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
A battery-operated keyless entry control device, the
eForce-150 3090 Keyless Entry provides access control
for Adams Rite deadlocks, deadlatches, and exit devices.
eForce®-150
3090 Keyless Entry
Function
The eForce 3090 Keyless Entry is a battery-operated keyless entry control
for Adams Rite deadlocks, deadlatches and exit devices, that is compatible
with aluminum stile, steel, and wood door applications. The device can
accommodate up to 150 users, including master, supervisor, and emergency
users plus two one-time codes. The eForce 3090 can operate in three
modes: Standard, Passage, and Lockout. All programming is accomplished
via the keypad. Device operation is confirmed by both a visual LED light
indicator and an audible sound generated by a piezo horn.
Operation
In the standard mode of operation, a programmed 2 to
7-digit character followed by a star (*) key allows for one
entry when used with Adams Rite deadlatches or exit
devices. The MS Deadlocks must always be relocked
manually when used with the eForce 3090. Hold open time
is adjustable from 1 to 9 seconds.
Features
• Surface mounted with concealed fasteners
(1-3/4" to 2-1/4" door thickness)
• Non-handed with clutched lever protection
• Key override via mortise cylinder (1" to 1-1/2" length
with MS® cam)
• UV stable keypad material
• Full outdoor rating: temperature range from -31°F to 151°F
(-35°C to 65°C) and 5-95% humidity (non-condensing)
• Powered by 4 AA alkaline batteries; supports
60,000 activations
Specifications
HOUSING
• The sleek-looking 3090 eForce measures 1-3/4" wide x
15-3/8" high, with Satin Chrome (626) and Powdercoat
Dark Bronze (121) finishes.
HANDLE
• Clutch-protected cast zinc alloy, finished to match
housing, field selectable handing.
COMPATIBLE LOCKING DEVICES
• The 3090 eForce retrofits to Adams Rite MS® Deadlocks,
4500 and 4900 Deadlatches and 8000 Series Exit
Devices in 31/32" backsets and greater. Additionally, the
3090 eForce-150 is compatible with Yale 7200 Series
and Corbin Russwin ED4000 Series exit devices (check
model number for availability).
OPTIONS
• RSK-3090, Remote activation input cable
STANDARD PACKAGE
• Individually boxed with installation instructions, manual, and
mounting hardware for metal door applications from 1-3/4"
to 2-1/4" thick. Shipping weight approximately 5.5 lbs.
EFORCE®-150 3090 KEYLESS ENTRY
ELECTRIFIED
PRODUCT
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-5
EFORCE®-150 3090 KEYLESS ENTRY
HOW TO ORDER EFORCE®-150 3090 KEYLESS ENTRY
Specify quantity and the following information. Order related products separately.
PRODUCT NO. COMPATIBLE PRODUCTS FINISH
3090 -01 -626
01 Adams Rite latches or 8000 Series Exit Devices, Yale 7200 series, Corbin
Russwin ED4000 series exit devices only 121 To match 313 Dark Bronze Anodized
02 Adams Rite MS® deadlocks 626 Satin Chrome
CYLINDER CAM
• Operable by any standard 1-5/32"
diameter mortise cylinder with MS®
cam dimensioned as shown. Cylinders
with MS® cams can be readily obtained
from most cylinder manufacturers. See
CYLINDERS section for cylinder make,
thumbturn and trim ring information.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
ONE WALL ONLY
INSTALL RIVNUT
C
L
OF CYLINDER
PREP
4X ø
1-7/16"
36.5mm
3-7/8"
98.4mm
2"
50.8mm
1/2"
12.7mm
6-13/32"
162.7mm
5"
127mm 15-3/8"
390.5mm
7-19/32"
192.9mm
1-3/4"
44.5mm
11-15/16"
303.2mm
7/8"
22.23mm
1/4"
6.4mm
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related
products, available separately:
This product is compatible with the following products:
Accessories Cylinder Deadlocks Deadlatches Exit Devices
RSK-3090 Remote
Activation Kit.
Key override for the eForce
3090 by any standard 1-5/32"
diameter mortise cylinder with
MS® cam.
MS1850S(-050), MS1850SN(-050),
MS1950(-050).
4500 Series Standard
Duty Deadlatch.
4900 Series Heavy
Duty Deadlatch.
Adams Rite 8000 Series
Exit Devices in 31/32"
backset or greater.
DimensionsDimensions Stile Preparation
Installation
T-6 TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The eForce 3090P (Prox) and 3090C (iCLASS) Keyless
Entries provide maximum security with either HID® Prox or
iCLASS contactless card reader.
eForce® 3090P, 3090C
Keyless Entry
Function
The eForce 3090P, 3090C is a hardwired keyless entry control for Adams Rite
deadlocks, deadlatches and exit devices, that is compatible with aluminum stile,
steel and wood door applications.
An authorized card presentation is confirmed with an audible beep and visual
change in the red/green LED indicator – displaying the locked/unlocked status. A
high-speed motor engages an internal clutch to enable the exterior lever handle
operation. Upon timeout, the lever operation is disabled until the next authorized
card presentation or key override. The MS® Deadlocks must always be relocked
manually when used with the eForce 3090P, 3090C Keyless Entry Trim.
Hardwired installation: 18-22 AWG recommended (seven conductor stranded and
shielded). 500 ft maximum distance to host.
Features
• Non-handed with clutched lever protection
• Key override via mortise cylinder (1" to 1 1/2" length
with MS® cam)
• Surface mounted with concealed fasteners (1-3/4" to 2-1/4"
door thickness)
• Temperature range: -31°F to 151°F (-35°C to 65°C) and
5-95% humidity (non-condensing)
Specifications
ELECTRICAL SPECS: eFORCE 3090P PROX
• Integrated HID® 125 KHz Prox contactless card reader
• Interfaces with any Wiegand-compatible access
control system
• Recognizes HID® Prox 26-39 bit formats
• FCC Part 15 (USA & Canada)
• 12VDC/150mA average 300mA peak
ELECTRICAL SPECS: eFORCE 3090C ICLASS
• Integrated HID® 13.56 MHz iCLASS Reader
• Supported credential formats:
• CLASS – ISO 15693
• CSN Read Only: MIFARE 14443A, DESFire – ISO
14443A, Sony Felica – ISO 14443C
• 12VDC/150mA average 300mA peak
HOUSING
• The sleek-looking eForce-3090P, 3090C measures
1-3/4" wide x 15-3/8" high, with Satin Chrome (626) and
Powdercoat Dark Bronze (121) finishes.
HANDLE
• Clutch-protected cast zinc alloy, finished to match housing,
field selectable handing.
COMPATIBLE LOCKING DEVICES
• The eForce 3090P, 3090C retrofits to Adams Rite MS®
Series Deadlocks, 4500 and 4900 Deadlatches and
8000 Series Exit Devices in 31/32" backsets and greater.
Additionally, the 3090P/C is compatible with Yale 7200
Series and Corbin Russwin ED4000 Series exit devices
(check model number for availability).
OPTIONS
• Add Cable Extension Kit (12’) 3090-CABLE with connectors
to allow for wiring to run from installation site to hub.
STANDARD PACKAGE
• Individually boxed with installation instructions, owner’s
manual, and mounting hardware for metal door
applications from 1-3/4" to 2-1/4" thick. Shipping weight
approximately 5.5 lbs.
EFORCE® 3090P, 3090C KEYLESS ENTRY
ELECTRIFIED
PRODUCT
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-7
EFORCE® 3090P, 3090C KEYLESS ENTRY
HOW TO ORDER EFORCE® 3090P, 3090C KEYLESS ENTRY
Specify quantity and the following information. Order related products separately.
PRODUCT NO. CREDENTIAL COMPATIBLE PRODUCTS FINISH
3090 P-01 -626
P 125 kHz HID® Prox 01 Adams Rite latches or 8000 Series Exit Devices, Yale 7200 series, Corbin
Russwin ED4000 series exit devices only 121 To match 313 Dark Bronze Anodized
C 13.56 MHz HID iCLASS 02 Adams Rite MS® deadlocks 626 Satin Chrome
CYLINDER CAM
• Operable by any standard 1-5/32"
diameter mortise cylinder with MS®
cam dimensioned as shown. Cylinders
with MS® cams can be readily obtained
from most cylinder manufacturers. See
CYLINDERS section for cylinder make,
thumbturn and trim ring information.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related
products, available separately:
This product is compatible with the following products:
Accessories Cylinder Power Deadlocks Deadlatches Exit Devices
3090-CABLE 12’
Cable Extension Kit.
Key override for the
eForce 3090 by any
standard 1-5/32"
diameter mortise
cylinder with MS® cam.
PS-1 and 4612
Power Transfer
Device.
Compatible with Adams
Rite MS Deadlocks
including: MS1850S(-050),
MS1850SN(-050),
MS1950(-050).
4500 Series Standard
Duty Deadlatch.
4900 Series Heavy
Duty Deadlatch.
Adams Rite 8000 Series
Exit Devices in 31/32"
backset or greater.
DimensionsDimensions Stile Preparation
Installation
ONE WALL ONLY
INSTALL RIVNUT
C
L
OF CYLINDER
PREP
4X ø
1-7/16"
36.5mm
3-7/8"
98.4mm
2"
50.8mm
1/2"
12.7mm
6-13/32"
162.7mm
5"
127mm
15-3/8"
390.5mm
7-19/32"
192.9mm
1-3/4"
44.5mm
11-15/16"
303.2mm
7/8"
22.2mm
1/4"
6.4mm
T-8 TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The A100-3090H Keyless Entry Control and Aperio® Hub
provides maximum security and audit trail with either HID®
Prox or iCLASS contactless card reader that can integrate
into existing access control systems.
A100-3090H
Keyless Entry Control
and Aperio® Hub
Function
The A100-3090H is a keyless entry control for Adams Rite deadlocks,
deadlatches and exit devices, that is compatible with aluminum stile, steel and
wood door applications.
An authorized card presentation is confirmed with an audible beep and visual
change in the red/green LED indicator – displaying the locked/unlocked status. A
high-speed motor engages an internal clutch to enable the exterior lever handle
operation. Upon timeout, the lever operation is disabled until the next authorized
card presentation or by key override.
Features
• Aperio wireless technology
• Vandal resistant lever with break-away (resettable) clutch
• Key override via mortise cylinder (1 to 1 1/2" length with MS®
cam, available separately)
• Surface mounted with concealed fasteners (1-3/4" to 2-1/4"
door thickness)
• Temperature range: -31°F to 151°F (-35°C to 65°C) and
5-95% humidity (non-condensing)
• Efficiant power usage; 4 x AA Alkaline, included; supports
60,000 activations.
• 50 ft. max. distance to wireless hub.
Specifications
WIRELESS ACCESS CONTROL
• Minimal field configuration for quick, easy wireless
deployments that eliminate the cost and inconvenience
of hardwiring the door
• Fully-encrypted AES 128 bit wireless communication
between the A100 lock and Aperio hub ensures
data security
• The Aperio wireless hub connects to an access control
system with typical Wiegand wiring and additional REX,
DPS, tamper and low batter signal wires
• The Aperio hub should be mounted within 50’ of the desired
lock location and through two walls or less
HOUSING
• The sleek-looking A100-3090H measures 1-3/4" wide x
15-3/8" high, with Satin Chrome (626) and Powdercoat Dark
Bronze (121) finishes.
HANDLE
• Clutch-protected cast zinc alloy, finished to match housing;
field selectable handing.
COMPATIBLE LOCKING DEVICES
• The A100-3090H works with existing Adams Rite MS®
Deadlocks, 4500, 4700, 4900, Series Deadlatches and
8000 Series Exit Devices in 31/32" backsets and greater.
Additionally, the A100-3090H is compatible with Yale 7200
Series and Corbin Russwin ED4000 Series exit devices
(check model number for availability).
ELECTRICAL SPECS
• Integrated HID® 125 KHz Prox contactless card reader
supporting HID® Prox 26-39 bit formats
• Integrated HID® 13.56 MHz iCLASS contactless card reader.
• FCC Part 15 (USA and Canada) Compliant
OPTIONS AND ACCESSORIES
• DPS switch (DPS-C-38G), Mortise Cylinder.
STANDARD PACKAGE
• Individually boxed with installation instruction, wireless hub
and mounting hardware for metal door applications from
1-3/4" to 2-1/4" thick. Shipping weight approximately 6 lbs.
A100-3090H KEYLESS ENTRY CONTROL
AND APERIO® HUB
ELECTRIFIED
PRODUCT
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-9
A100-3090H KEYLESS ENTRY CONTROL
AND APERIO® HUB
HOW TO ORDER A100-3090H KEYLESS ENTRY CONTROL AND APERIO® HUB
Specify quantity and the following information. Order related products separately.
PRODUCT NO. CREDENTIAL COMPATIBLE PRODUCTS FINISH
A100-3090H -C -1 -626
P 125 kHz HID® Prox
1 Adams Rite latches or 8000 Series Exit Devices, Yale 7200
series, Corbin Russwin ED4000 series exit devices only.
(select REX enabled version)
121 To match 313 Dark Bronze Anodized
C 13.56 MHz HID iCLASS 2 Adams Rite MS® deadlocks 626 Satin Chrome
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following
related products, available separately:
This product is compatible with the following products:
Accessories Cylinder Deadlocks Deadlatches Exit Devices
DPS-C-38G
DPS switch.
Key override for the eForce 3090
by any standard 1-5/32" diameter
mortise cylinder with MS® cam.
MS1850S(-050),
MS1850SN(-050)
MS1950(-050).
4500 Series Standard Duty Deadlatch.
4900 Series Heavy Duty Deadlatch.
Adams Rite 8000 Series
Exit Devices in 31/32"
backset or greater.
CYLINDER CAM
• Operable by any standard 1-5/32"
diameter mortise cylinder with MS®
cam dimensioned as shown. Cylinders
with MS® cams can be readily obtained
from most cylinder manufacturers. See
CYLINDERS section for cylinder make,
thumbturn and trim ring information.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
DimensionsDimensions Stile Preparation
ONE WALL ONLY
INSTALL RIVNUT
C
L
OF CYLINDER
PREP
4X ø
1-7/16"
36.5mm
3-7/8"
98.4mm
2"
50.8mm
1/2"
12.7mm
6-13/32"
162.7mm
1-23/32"
43.7mm
4-9/16"
115.9mm
4-1/4"
10.8mm
5"
127mm
15-3/8"
390.5mm
7-19/32"
192.9mm
1-3/4"
44.5mm
11-15/16"
303.2mm
7/8"
22.2mm
1/4"
6.4mm
Installation
Hub
T-10 TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The 4550 MS® Deadlock Lever easily unlocks an MS®
Deadlock with approximately three pounds of downward
force. The spring-loaded lever relocks with an upward motion.
4550 MS®
Deadlock Lever
Function
Easy unlocking of any MS Deadlock by approximately 3lbs. downward force on a
3" lever. Lever is spring loaded to horizontal, relocks with upward motion. Indicator
signals lock status. Can be installed in place of existing key cylinder or cylinder
type thumbturn on inside of door. 4550 Deadlock Lever not compatible with 7/8"
backset locks.
Operation
Turn lever downward 90° to unlock. When released, lever
returns to horizontal. Turn lever upward 90° to relock. Key
operation from outside is not affected. Clutching action
prevents damage to internal components.
Specifications
HOUSING
• Aluminum casting is 1-3/8" wide x 7-1/2" long x 1" deep.
LEVER
• 3" long aluminum with end-return design offers comfortable
grip to lock or unlock.
INDICATOR
• Words “LOCKED" in red letters or “OPEN" in black letters
appear on white background when lock is thrown or
retracted. Indicator is driven by lock bolt itself.
STOP CLEARANCE
• Lever housing projects 11/16" forward of cylinder backset
centerline. Depending on height of door stop and width
of door/jamb gap, it may be necessary to modify the
stop to clear the housing. For fin type stops, this is easily
accomplished. Hollow stops may preclude use of lever.
COMPATIBLE LOCKS
• Any MS® pivoted bolt deadlock including “Schoolhouse”
versions can be fitted with the 4550 including MS1850S,
MS1950, MS1837, etc. Derivative units such as 1870,
1870HM, or 1877 flushbolts (bolt into threshold) are also
operable by the 4550 lever. Not compatible with MS+1890 or
2190 Deadlock/Latch or with 7/8" backset locks.
OPTIONS
• Available in three finishes to match anodized aluminum
finishes. Can be ordered for left or right hand door, but is easily
reconfigured in the field to accommodate either door swing.
STANDARD PACKAGE
• Individually boxed with installation instructions, mounting
screws, and drive pins for both single point and threshold
bolt-equipped locks. Shipping weight: 1 lb.
4550 MS® DEADLOCK LEVER
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-11
4550 MS® DEADLOCK LEVER
HOW TO ORDER 4550 MS® DEADLOCK LEVER
Specify quantity and the following information. Order related products separately.
PRODUCT NO. DOOR HAND* DOOR THICKNESS RITECOAT FINISH
4550 R-01 -130
R RH or RHR 01 1-3/4" to 2" 119 To match 335 Black Anodized
L LH or LHR 02 2-1/8" to 2-3/8" 121 To match 313 Dark Bronze Anodized
130 To match 628 Clear Anodized
*Regardless of swing
COMPATIBLE PRODUCTS
This product is compatible with the following products:
Deadlocks Flushbolts
MS1837, MS1850S, MS1850SN, MS1861, MS1950
Not compatible with 7/8" backset .
1870 Series Cylinder-Operated Flushbolts.
1877 Cylinder-Operated Flushbolts.
DimensionsDimensions Stile Preparation
(REF)
(REF)
90˚ TO LOCK
10-32
(4 PLCS)
CYLINDER
BACKSET
(2 PLCS)
CYLINDER
90˚ TO UNLOCK
CYLINDER
2-15/32"
62.7mm
1-13/32"
35.7mm
45/64"
17.9mm
1-11/32"
34.1mm
1-31/32"
50mm
6-13/64"
157.6mm
2-57/64"
73.4mm
11/16"
17.5mm
11/32"
8.7mm
1-19/32"
40.5mm
29/64"
11.5mm
DIA.
7/8"
22.2mm
3/16"
4.8mm
2-3/32"
53.2mm
1-13/32"
35.7mm
4-17/64"
108.3mm
7-15/64"
183.8mm
3-5/32"
80.2mm
Installation
T-12 TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The 4560 and 4565 Deadlatch Handles easily unlock the
4300, 4500 and 4900 Series Deadlatches. These handles fit
solidly into the cylinder hole of the latch.
4560, 4565
Deadlatch Handles
Function
Designed to operate 4300, 4500 and 4900 Series Deadlatches by a natural
downward hand movement, these handles incorporate an activator cam disc
that mounts on the handles escutcheon and fits solidly into the cylinder hole of
the latch. Not intended for use as a door pull.
Specifications
4560 HANDLE
• ADA Compliant lever is shaped to fit the hand, with a
concave thumb-rest portion that tends to keep knuckles
and thumb safely away from the jamb, even on a short
backset narrow stile.
4565 HANDLE
• Thumbturn of minimum practical length is designed to
offer a firm grip to the fingertips. Ideal for doors where the
latch is operated infrequently or in emergencies only.
ESCUTCHEONS
• Both handles shown here use the same 1-3/8" x 4"
escutcheon, designed to match the clean lines of a narrow
stile door. A 1/4" square heat-treated spindle is part of
escutcheon assembly, which interlocks with the cam plug.
Finished to match lever.
CAM PLUGS
• Secured in latch body by cylinder setscrew, the plug is
also rigidly tied to handle escutcheon by hardened steel
pins. Handing can be reversed by removing a spring clip,
reversing the cam, and replacing the clip.
OPTIONS
• Can be ordered for left or right hand door, but is easily
reconfigured in the field to accommodate either door
swing. The standard handles shown are for 1-3/4" thick
doors. Available on special order for doors up to 3-1/4".
STANDARD PACKAGE
• Individually bagged and bulk-packed in cartons, up to
100 per carton.
4560, 4565 DEADLATCH HANDLES
4565
4560
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-13
4560, 4565 DEADLATCH HANDLES
STILE
LATCH
BACKSET
LATCH
CYLINDER
TAP #10-32
(2 PLCS)
LOCK WASHERS
(2 REQ.)
SETSCREW 10-32 SCREWS
(2 REQ.)
3"
76.2mm
3"
76.2mm
3/64"
1.2mm
1-51/64"
45.6mm
1-3/8"
34.9mm
13/32"
10.3mm
1-1/2"
38.1mm
4"
101.6mm
5/8"
15.9mm
7/16"
11.1mm
1/2"
12.7mm
13/32"
10.3mm
4-1/8"
104.8mm
43/64"
17.1mm
57/64"
22.6mm
11/64"
4.4mm
1-11/32"
34.1mm
1-23/32"
43.7mm
DIA.
1-1/4"
31.8mm
REVERSIBLE 4580 CAM DISC
• Included with 4560, 4565 handles.
• Required to operate 4500 / 4900 /
existing 4700 series latches.
4560
4565
HOW TO ORDER 4560, 4565 DEADLATCH HANDLES
Specify quantity and the following information. Order related products separately.
PRODUCT NO. HANDLE TYPE HANDING DOOR THICKNESS RITECOAT FINISH
456 0-5 01 -130
0 Lever 0 Using MS+1890 For 4300, 4500, 4900 Series Deadlatches For MS+1890 119 To match 335 Black Anodized
5 Turn 5 LH or LHR 01 1-3/4" to 2" 11 1-3/4" 121 To match 313 Dark Bronze Anodized
6 RH or RHR 02 2-1/4" to 2-1/2" 12 1-3/4" to 2-1/4" 130 To match 628 Clear Anodized
03 2-3/4" to 3" 13 2-5/16" to 2-3/4"
04 3-1/4"
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlatches
4300 Electrified Deadlatch
4500 Series Standard Duty Deadlatch
4900 Series Heavy Duty Deadlatch
DimensionsDimensions Narrow Stile Preparation
Installation
T-14 TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The 4568 and 4569 Deadlatch Handles easily unlock the
4300, 4500 and 4900 Series Deadlatches. These handles fit
solidly into the cylinder hole of the latch.
4568, 4569 Eurostyle
Deadlatch Handles
Function
Designed to operate 4300, 4500 and 4900 Series Deadlatches by a natural
downward hand movement, these handles incorporate an activator cam disc that
mounts on the handles escutcheon and fits solidly into the cylinder hole
of the latch. Not intended for use as a door pull.
Specifications
LEVERS
• Lever of cast aluminum, in choice of 130 Satin Aluminum,
121 Dark Bronze, or 119 Black. Modern European styling
offers a generous hand grip with shank offset from the
narrow stile jamb for hand safety. 4569 has return end to
meet anti-snag code requirements.
ESCUTCHEONS
• Both handles shown use the same 1-3/8" x 4" escutcheon,
designed to match the clean lines of a narrow stile door.
Steel mounted base is secured by hidden screws and has
two large helical compression springs (one becomes a
“spare” once handing is given). A 1/4" square heat-treated
spindle is part of escutcheon assembly, which interlocks with
the cam plug. Finished to match lever.
CAM PLUGS
• Secured in latch body by cylinder setscrew, plug is
also rigidly tied to handle escutcheon by hardened steel
pins. Handing can be reversed by removing a spring clip,
reversing the cam, and replacing the clip.
OPTIONS
• Can be ordered for left or right hand door, but is
easily reconfigured in the field to accommodate either door
swing. The standard handles shown are for 1-3/4" thick
doors. Available on special order for doors up to 3-1/4".
STANDARD PACKAGE
• Packed individually with cam plug handed LH or RH as
specified. Mounting screws included. Shipping weight: 1/2 lb.
4568, 4569 EUROSTYLE DEADLATCH HANDLES
4568
4569
sw 4568
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-15
4568, 4569 EUROSTYLE DEADLATCH HANDLES
LATCH
BACKSET
HOLE LOCATIONS
SAME AS ON LEFT
(2 PLCS)
FOR “TEE” NUT
(NOT FURNISHED)
CYLINDER
DIA.
TAP #10-32
(2 PLCS)
LATCH
BACKSET
LATCH
CYLINDER
STILE
BACKSET 3"
76.2mm
3"
76.2mm
1-1/4"
31.8mm
4-3/16"
125.8mm
41/64"
16.3mm
DIA.
1-1/4"
31.8mm
1/4"
6.4mm
1-23/32"
43.7mm
1-23/32"
43.7mm
1-11/32"
34.1mm
5/32"
4mm
4-23/32"
119.9mm
1/2"
12.7mm
2-11/32"
59.5mm
TAP #10-32
[M5] 2PL
CYLINDER HOLE
AS PREPARED
FOR LATCH
4569
4568
REVERSIBLE
4580 CAM DISC
• Included with 4568 &
4569 handles.
• Required to operate
4500 / 4900 / existing 4700
series latches
HOW TO ORDER 4568, 4569 EUROSTYLE DEADLATCH HANDLES
Specify quantity and the following information. Order related products separately.
PRODUCT NO. LEVER TYPE HANDING DOOR THICKNESS FINISH
456 8-5 01 -130
8 Straight 0 Using MS+1890 For 4300, 4500, 4900 Series
Deadlatches For MS+1890 119 To match 335 Black Anodized
9 Return End 5 LH or LHR 01 1-3/4" to 2" 11 1-3/4" to 1-15/16" 121 To match 313 Dark Bronze Anodized
6 RH or RHR 02 2-1/4" to 2-1/2" 12 2" to 2-1/4" 130 To match 628 Clear Anodized
03 2-3/4" to 3" 13 2-5/16" to 2-3/4"
04 3-1/4" 14 3”
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related products,
available separately:
This product is compatible with the following products:
Accessories Deadlatches
Thick door kits, as required. 4300 eLatch Electrified Deadlatch
4500 Series Standard Duty Deadlatch
4900 Series Heavy Duty Deadlatch
Dimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Narrow Stile
Preparation
Wood Door
Preparation
Installation
T-16 TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The 4590 Deadlatch Paddle is an ergonomically-friendly
alternative to a knob or lever handle. Operate with a simple
push or pull.
4590 Deadlatch
Paddle
Function
An alternative to knob or lever handles. Makes opening a latched door as
natural as opening an unlatched one – just push or pull in the direction
the door swings. Available for any Adams Rite 4300, 4500 or 4900 Series
Deadlatch, MS+1890 Deadlock/Latch, or 2190/2290 Interconnected Deadbolt/
Deadlatch.
Operation
Available in four configurations: push to left, push to right, pull to left,
and pull to right.
Specifications
PADDLE
• Extruded aluminum, 628 Clear Anodized finish (US28).
313 Dark Bronze Anodized and 335 Black Anodized are
also available.
ESCUTCHEON
• Zinc alloy with black finish. Houses steel operating
mechanism. Secured to door stile with special binder posts
that extend into the escutcheon to rigidly resist torque
loads in any direction.
CAM PLUG
• Furnished for use with 4300, 4500 and 4900 Series
Deadlatches. Cam plug not for use with MS+1890
Deadlock/Latch or 2190/2290 Interconnected Deadbolt/
Deadlatch. Secured in latch body by cylinder setscrew, plug
is also rigidly tied to escutcheon by hardened steel pins.
OPTIONS
• First dash number specified operation (handing) and
compatible latch. Second dash number can be used to
specify non-standard units for doors thicker than 1-3/4"
(see dash table on back of page).
STANDARD PACKAGE
• Individually boxed with mounting hardware. Units for
4300, 4500 or 4900 Series Deadlatches include cam plug.
Shipping weight: 1-1/2 lb.
4590 DEADLATCH PADDLE
CAM PLUG
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-17
4590 DEADLATCH PADDLE
1/4-28
NUT
CAM PLUG
(NOT REQ. WITH
MS+1890/2190)
8-32
SCREWS PIVOT PIN
SETSCREW
STILE
LATCH
CYL.
DIA.
(2 PLCS)
BACKSET
DIA.
-03 OR -13
LH
LHR
RH
RHR
-02 OR -12
-02 OR -12
-03 OR -13
-04 OR -14
-01 OR -11
-04 OR -14
-01 OR -11
9/32"
7.1mm
3"
76.2mm
1-23/32"
43.7mm
1-1/4"
31.8mm
INSTALL
BINDER
POSTS
1
INSTALL
LATCH &
CAM PLUG
2
INSTALL
ESCUTCHEON
3 4
INSTALL
PADDLE
PUSH*
PULL*
5-29/32"
150mm
4"
101.6mm
1-11/32"
34.1mm
*SHOWN AT REST.
PADDLE TRAVEL IS: 1-29/32"
48.4mm
1"
25.4mm
1-19/64"
32.9mm 9/16"
14.2mm
2-5/16"
58.7mm
HOW TO ORDER 4590 DEADLATCH PADDLE
Specify quantity and the following information. Order related products separately.
PRODUCT NO. OPERATION DOOR THICKNESS FINISH*
4590 02 -00 -313
See table above For 4300, 4500, 4900 Series Deadlatches For MS+1890, 2190 313 Dark Bronze Anodized
00 1-3/4" 03 2-3/4" to 3" 00 1-3/4" 02 2-5/16" to 2-1/2" 335 Black Anodized
01 1-13/16" to 2" 04 3-1/4" 01 1-3/4" to 2-1/4" 03 2-9/16" to 2-3/4" 628 Clear Anodized
02 2-1/4" to 2-1/2"
*Paddle only
COMPATIBLE PRODUCTS
This product is compatible with the following products:
Deadlocks Deadlatches
MS+1890 Deadlock/Latch
2190/2290 Interconnected Deadbolt/Deadlatch
4300 eLatch Electrified Deadlatch
4500 Series Standard Duty Deadlatch
4900 Series Heavy Duty Deadlatch
FIRST DASH
FOR LATCH SERIES OPPERATION USE
-01 4300/4500/4900 PULL
TO LEFT
Outside of left hand reverse door or
inside of right hand
-11 MS+1890/2190
-02 4300/4500/4900 PUSH
TO LEFT
Outside of left hand door or inside of right
hand reverse
-12 MS+1890/2190
-03 4300/4500/4900 PULL
TO RIGHT
Outside of right hand reverse door or
inside or left hand
-13 MS+1890/2190
-04 4300/4500/4900 PUSH
TO RIGHT
Outside of right hand door or inside of left
hand reverse
-14 MS+1890/2190
For 4500/4900 latches, see MS+1890/2190
for different hole pattern
Stile Preparation
Installation
DimensionsDimensions
T-18 TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The 4591 Deadlatch Paddle is an ergonomically-friendly
alternative to a knob or lever handle. Operate with a simple
push or pull.
4591 Deadlatch
Paddle
Function
An alternative to knob or lever handles. Makes opening a latched door as natural
as opening an unlatched one – just push or pull in the direction the door swings.
Available for any Adams Rite 4300, 4500 or 4900 Series Deadlatch, MS+1890
Deadlock/Latch, or 2190/2290 Interconnected Deadbolt/Deadlatch.
Operation
Available in four configurations: push to left, push to right, pull to left, and pull to
right. Can be reconfigured to any mode in the field. Dogging not to be installed in
pull configuration.
Specifications
PADDLE
• Extruded aluminum, 628 Clear Anodized finish (US28). 313
Dark Bronze Anodized and 335 Black Anodized are also
available. US3 Bright Brass, US26 Bright Chrome, or US26D
Satin Chrome plating is also available.
ESCUTCHEON
• Zinc alloy with Black finish. Houses steel operating
mechanism. Secured to door stile with special binder posts
that extend into the escutcheon to rigidly resist torque loads
in any direction.
CAM PLUG
• Furnished for use with 4300, 4500 and 4900 Series
Deadlatches. Cam plug not for use with MS+1890 Deadlock/
Latch or 2190/2290 Interconnected Deadbolt/Deadlatch.
Secured in latch body by cylinder setscrew, plug is also
rigidly tied to escutcheon by hardened steel pins.
MONITOR SWITCH OPTIONS
4591M
• Paddle without latch drive mechanism but with switch that
can be wired to make or break a low voltage circuit.
4591MA
• Paddle with latch drive mechanism, complete active
paddle with switch.
91-0914 MONITOR SWITCH KIT
• Adds monitor switch function to 4591 Paddle ("push"
version only).
PADDLE DOGGING (“PUSH” VERSIONS ONLY)
• Turning hex key in escutcheon holds the paddle down,
leaving door free-swinging. Dogging key provided.
OPTIONS
• First dash number specifies operation (handing) and
compatible latch. Second dash number can be used to
specify non-standard units for doors thicker than 1-3/4"
(see dash table on back of page). Also available: 4591M
Paddle/switch to actuate magnetic lock, alarm, etc. (No latch
retracting mechanism). 4591MA Active Paddle with switch
and latch retracting mechanism. 4781 Two-Point Deadlatch
uses a modified, but matching version of the 4591 Paddle.
STANDARD PACKAGE
• Individually boxed with dogging hex key and mounting
hardware. Units for 4300, 4500 or 4900 Series Deadlatches
include cam plug. Shipping weight: 1-1/2 lbs.
4591 DEADLATCH PADDLE
CAM PLUG
HEX KEY
FOR DOGGING
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-19
4591 DEADLATCH PADDLE
PUSH*
PULL*
*SHOWN AT REST.
PADDLE TRAVEL IS:
-03 OR -13
LH
LHR
RH
RHR
-02 OR -12
-02 OR -12
-03 OR -13
-04 OR -14
-01 OR -11
-04 OR -14
-01 OR -11
STILE
LATCH
CYL.
DIA.
(2 PLCS)
BACKSET
DIA.
CAM PLUG
(NOT REQ. WITH
MS+1890/2190)
10-32
SCREWS
5/16-24
NUT
PIVOT PIN
SETSCREW
5"
127mm
1-51/64"
45.6mm
2"
50.8mm
7/8"
22.2mm
2-1/16"
77.8mm
21/64"
8.3mm
3"
76.2mm
1-1/2"
38.1mm
1-1/4"
31.8mm
4-5/32"
105.6mm
1-11/32"
34.1mm
INSTALL
BINDER
POSTS
1
INSTALL
LATCH &
CAM PLUG
2
INSTALL
ESCUTCHEON
3
INSTALL
PADDLE
4
For 4500/4900 latches, see MS+1890/2190
for different hole pattern
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following
related products, available separately:
This product is compatible with the following products:
Accessories Deadlocks Deadlatches
91-0914 Monitor Switch Kit. MS+1890 Deadlock/Latch
2190/2290 Interconnected Deadbolt/Deadlatch
4300 eLatch Electrified Deadlatch
4500 Series Standard Duty Deadlatch
4900 Series Heavy Duty Deadlatch
FIRST DASH
FOR LATCH SERIES OPPERATION USE
-01 4300/4500/4900 PULL
TO LEFT
Outside of left hand reverse door or
inside of right hand
-11 MS+1890/2190
-02 4300/4500/4900 PUSH
TO LEFT
Outside of left hand door or inside of right
hand reverse
-12 MS+1890/2190
-03 4300/4500/4900 PULL
TO RIGHT
Outside of right hand reverse door or
inside or left hand
-13 MS+1890/2190
-04 4300/4500/4900 PUSH
TO RIGHT
Outside of right hand door or inside of left
hand reverse
-14 MS+1890/2190
DimensionsDimensions Stile Preparation
Installation
HOW TO ORDER 4591 DEADLATCH PADDLE
Specify quantity and the following information. Order related products separately.
PRODUCT NO. OPTIONS** OPERATION DOOR THICKNESS FINISH*
4591 M02 -00 -313
- Standard Paddle See table above For 4300, 4500, 4900 Series Deadlatches For MS+1890, 2190 313 Dark Bronze Anodized
M Paddle w/ switch only 00 1-3/4" 00 1-3/4" 335 Black Anodized
MA Active paddle w/ switch 01 1-13/16" to 2" 01 1-3/4" to 2-1/4" 628 Clear Anodized
02 2-1/4" to 2-1/2" 02 2-5/16" to 2-1/2" US3 Bright Brass
03 2-3/4" to 3" 03 2-9/16" to 2-3/4" US26 Bright Chrome
04 3-1/4" US26D Satin Chrome
* Paddle only. ** M and MA options availble on push paddles only, not pull paddles.
T-20 TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The 4600 Heavy Duty Designer Deadlatch Handles
are designed with a patented adjustable drive mechanism
to operate the 4300, 4500, and 4900 Series Deadlatches
and Dual Force 2190/2290 Interconnected Deadbolt/
Deadlatch locksets.
4600 Heavy
Duty Designer
Deadlatch Handles
Function
Designed to operate 4300, 4500, and 4900 Series Deadlatches with either an
upward or downward motion. 4600 Deadlatch Handles can be retrofitted in the
field onto the 2190/2290 Interconnected Deadbolt/Deadlatch. Shipped handed,
but easily reconfigured to accommodate either door swing (MV and MN handle
types cannot be re-handed). The patented adjustable drive mechanism allows the
escutcheon to be set back from the door edge at the time of installation to provide
additional clearance. Request-to-Exit (REX) switch optional to provide signal
when lever is actuated.
Specifications
DESIGN
• Designed to match the clean lines of a narrow stile door,
the 4600 Heavy Duty Designer Series Deadlatch Handles
combine aesthetics, function, and strength in a compact yet
robust package. Offered in a wide range of lever designs
and architectural finishes, the 4600 Series Deadlatch Handle
complements the most contemporary door systems.
HANDLES
• Available in standard and designer series levers to blend with
existing architecture or to create a new design statement.
Made from solid cast stainless, brass, or bronze, and finished
to match any design requirement. Standard series lever
styles (-01, -02, -03) are designed to return within 1/2" of the
door face, as required by code in some areas.
ESCUTCHEON
• Mounted base is secured by hidden screws and has two
large helical compression springs. A 1/4" square heat-
treated spindle is part of escutcheon assembly, which
interlocks with the cam plug. Finished to match lever.
OPTIONS
• Can be ordered for left or right hand door, but is easily
reconfigured in the field to accommodate either door swing.
Standard handles are for 1-3/4" thick doors. Available by
special order for doors up to 3-1/4". Fixed lever (dummy)
kit available – use part number DTK-4600. Through-bolt
mounting kit for back-to-back mounting on wood doors, use
part number TBK-4600-XX (specify door thickness).
STANDARD PACKAGE
• Packed individually with cam plug (as needed), fasteners,
and optional equipment specified.
4600 HEAVY DUTY DESIGNER DEADLATCH HANDLES
STANDARD SERIES:
01-CURVE
MD MI
MV
02-ROUND
ME MJ
MW
03-SQUARE
MG MN
DESIGNER SERIES:
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM T-21
4600 HEAVY DUTY DESIGNER DEADLATCH HANDLES
HOW TO ORDER 4600 HEAVY DUTY DESIGNER DEADLATCH HANDLES
Specify quantity and the following information. Order related products separately.
PRODUCT NO. REX HANDLE HANDING** DOOR
THICKNESS COMPATIBLE PRODUCTS FINISH
4600 M-01 -5 1 1 -32D
(blank) Standard Standard Handles 5 LH or LHR 1 1-3/4" to 1-7/8" 1
2190, 2290 Interconnected
Deadbolt/Deadlatch
US3 Bright Brass
M REX Switch Option 01 Curve 6 RH or RHR 2 2" to 2-1/8" US4 Satin Brass
02 Round 3 2-1/4" to 2-3/8" 2 4300, 4500, 4900 Series Deadlatches US10B Oil-Rubbed Bronze
03 Square 4 2-1/2" to 2-5/8" US32 Bright Stainless
Designer Series 5 2-3/4" to 2-7/8" US32D Satin Stainless
MD MJ
ME MN* (Handed)
MG MV* (Handed)
MI MW
*MN and MV Designer Handles are not field reversible **Assuming handle on interior of door
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related products, available separately: This product is compatible with the following products:
Accessories Deadlatches
DTK-4600 Fixed Lever (Dummy) Kit.
TBK-4600-XX Thru-Bolt Mounting Kit for back-to-
back mounting on wood doors.
REX-4600 Request to Exit switch to indicate when
lever is actuated.
TDK-4600-XX Thick Door Kit for doors 2" to 2-7/8".
4300 eLatch Electrified Deadlatch
4500 Series Standard Duty Deadlatch
4900 Series Heavy Duty Deadlatch
VARIES BY HANDLE STYLE
BACKSET
2X, Ø 1/4"
THRU ONE WALL
INSTALL RIVNUT
4X,
Ø 7/32"
THRU
ONE WALL
CYLINDER HOLE AS
PREPARED FOR
4900 LATCH Ø 1-1/8"
4300 4500 & 4900
MAX
3-29/32"
99.2mm
1-11/32"
34.1mm
5/32"
4mm
1-1/2"
38.1mm
15/32"
11.9mm
15/16"
23.8mm
4-1/16"
103.2mm
1-3/16"
30.2mm
5"
127mm
1"
25.4mm
2-15/32"
62.7mm
6-21/32"
169.1mm
CAM PLUG (4581)
• Used when matched with 4300, 4500, or 4900 Series Deadlatches.
Secured to the latch body by cylinder setscrew, the cam plug is tied to
the handle escutcheon by integral anti-rotation pins. Handing easily
reversed with push-and-release cam design.
Dimensions Metal Door Preparation
Installation
T-22 TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
The 4024, 4025, 4026 Cylinder Pulls are designed to
operate Adams Rite MS1847 Deadlocks and the 5017
Wood Door Deadlock.
4024, 4025, 4026
Cylinder Pulls
Function
Designed for use with Adams Rite MS1847 Deadlocks and 5017 Wood Door
Deadlock, these surface mounted pulls allow a sliding glass door to be keyed-in
with other types of doors which have key-in-knob or mortise cylinder locks.
4024 Cylinder Pull
The 4024 five pin tumbler cylinder is smaller than the 4025
Cylinder Pull and it is symmetrical, designed for mounting door
pull or other trim plate. Can be mounted directly on stile where
lock mechanism is mounted on inside surface of stile rather
than mortised.
4025 Cylinder Pull
The 4025 five pin tumbler cylinder has mounting holes spaced
to allow clearance around MS1847 Deadlock mechanism for
long through-the-stile mounting screws.
4026 Cylinder Pull
A five pin tumbler cylinder, the 4026 Cylinder Pull is
designed for use with 5017 Wood Door Deadlock for wood
door applications.
Specifications
TRIM FINISH
• Zinc alloy housing. Standard finish: 130.
Cylinders are brass.
CYLINDER BOTH SIDES
• A pair of 4025 Cylinder Pulls can be mounted opposite
each other with long machine screws. Security is
maintained since each side offers access to only one
screwhead. Both screws would have to be removed to
operate the lock without its key. Specify 4025 CYLxCYL set.
OPTIONS
• CYLINDER MAKE: Pulls available with Schlage or Weiser
Keyway cylinders.
4024, 4025, 4026 CYLINDER PULLS
4024
4025
CYL X CYL
4025
ANSI/BHMA 156.5–2010 E 19231
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
CYLINDERS C-1
4024
4025
For 4025 mounted directly on stile by two through-screws.
Installation
4024, 4025, 4026 CYLINDER PULLS
HOW TO ORDER 4024, 4025 CYLINDER PULLS
Specify quantity and the following information. Order related products separately.
PULL TYPE PULL NO./CYLINDER INCLUDED FINISH
4024 -05 -130
4024 Trim Plate Mounted 05 Schlage "C: Keyway 119 To match 335 Black Anodized
4025 Stile Mounted with through - screws 06 Weiser Keyway 121 To match 313 Dark Bronze Anodized
4026 For Wood Applications 130 To match 628 Clear Anodized
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks
MS1847 Deadlock.
5017 Wood Door Deadlock (4026 only).
1-7/32"
31mm
1/8"
3.2mm
3/8"
9.5mm
2"
50.8mm
2-35/64"
64.7mm
DIA.
7/16"
11.1mm
7/8"
22.2mm
1/8"
3.2mm
2-29/32"
73.8mm
2-35/64"
64.7mm
2"
50.8mm
3/4"
19.1mm
1-7/32"
31.0mm
3/4"
19.1mm
2-1/4"
57.2mm
1-61/64"
49.6mm
31/32"
24.6mm
SPINDLE
SPINDLE
DRILL AND CSK FOR 2
#10-32 THRU SCREWS
MS1847
LOCK
FOR 4025
FOR 4024 ON
DOOR PULL
10-32
TAP
(4 PLCS.)
TAP 6-32
(2 PLCS.)
*4026, like 4025 but with mounting holes on centerline
for use with 5017 lock available on high quantity order.
Dimensions Stile Preparation
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
C-2 CYLINDERS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
The 4036 Mortise Cylinder provides five-pin security with
most Adams Rite locks or latches. The 4066 Thumbturn
operates locks or latches without a key.
4036 Mortise Cylinder
4066 Thumbturn
4036 Mortise Cylinder Function
A standard 1" long, 1-5/32" diameter cylinder with five-pin tumbler security.
Designed to operate any Adams Rite lock or latch requiring a mortise cylinder.
Close-tolerance manufacture and inspection achieve setscrew grooves and cam
that are true on their respective centerlines. This ensures proper mating and
operation with the lock or latch mechanism.
4036 Specifications
MORTISE CYLINDER SHELL
• Aluminum scalp with US28 Clear Anodized (628) or 313 (Dark Bronze
Anodized) or 335 (Black Anodized). Plug is US26 Chrome (625).
MORTISE CYLINDER KEYING
• Available in keyed-alike pairs (KA2), keyed-different (KD), and keyed-alike
sets of 50 (KA50). All cylinders furnished with two keys per cylinder.
MORTISE CYLINDER TRIM RING
• Furnished. 1/4" thick, suitable for 1-3/4" thick doors. Available by special
order for other door thicknesses.
4066 Thumbturn Function
To operate lock or latch without key. Interchanges with
standard 1-5/32" diameter mortise cylinder. Cams are available
to suit the particular Adams Rite lock or latch. (See back for
cam specifications.)
4066 Specifications
THUMBTURN SHELL
• Choice of three finishes: 130 to match Clear Anodized,
313 (Dark Bronze Anodized) or 335 (Black Anodized).
THUMBTURN TRIM RING
• Furnished. 1/4" thick, suitable for 1-3/4" thick doors.
Available by special order for other door thicknesses.
Specifications
STANDARD PACKAGE
• Individually packed with trim ring. 4036 also furnished
with keys.
4036 MORTISE CYLINDER 4066 THUMBTURN
4036
4066
ANSI/BHMA 156.5–2010 E 19211
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
CYLINDERS C-3
4036 MORTISE CYLINDER 4066 THUMBTURN
Cylinders “By Others”
Adams Rite deadlocks and latches are designed
to accept standard 1-5/32" mortise cylinders of all
popular makes. This means that the entrance can
be keyed to match the system used throughout
the building on other types of doors. Care must
be taken, however, to specify the proper cam
for each type of lock, as these are not generally
interchangeable. The cam shapes shown below
are available from the listed cylinder manufacturers
and will be supplied by them with the cylinder
when specified or available separately. Because
of variations in the attachment of cams to cylinders
and other construction differences, it is advisable
NOT to attempt using one manufacturer’s cylinder
with another’s cam.
HOW TO ORDER 4036 MORTISE CYLINDER
Specify quantity and the following information.
Order related products separately.
PRODUCT NO. LOCK TYPE KEY OPTIONS FINISH
4036 -01 -01 -628
01 For MS Lock, 4900
Deadlatches, 2190, etc. 01 KD 313 Dark Bronze Anodized
02 For 4070 Deadlock 02 KA2 335 Black Anodized
03 For 2331 Deadlock 50 Set 50 keyed alike 628 Clear Anodized
HOW TO ORDER 4066 THUMBTURN
Specify quantity and the following information.
Order related products separately.
PRODUCT NO. LOCK TYPE FINISH
4066 -01 -130
01 For MS Lock, 4900
Deadlatches, 2190, etc
130 To match 628
Clear Anodized
02 For 4070 Deadlock 313 Dark Bronze Anodized
03 For 2331 Deadlock 335 Black Anodized
DIMENSIONS OF CAM TO OPERATE THE FOLLOWING ADAMS RITE PRODUCTS:
Deadlocks Deadlatches Flushbolts Exit Devices Trim
1830, MS1837, MS1850S(-050), MS1850SN(-050),
MS1861, 1875, MS+1890, MS1950(-050), 2190, 2290
4300, 4510, 4530,
4900, 4920AN
1870, 1870HM,
1877, 4781 w/8650
8300, 8400, 8600
w/8650
3080, 3090
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± .060
FOR 2190 TR* = A - B
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125
– B
TR* = A + .132
– B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
DIM “A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS +1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm .182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“
TR
” is trim ring length.
“
A
” is cylinder height (less shoulder but including cam).
“
B
” is one-half of door thickness.
Dimensions
-01
-02 -03
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
C-4 CYLINDERS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
The MS4043 Cylinder Guard is a hardened-steel ring to
protect cylinder from vandalism.
MS4043
Cylinder Guard
Function
The standard mortise cylinder is made of brass. It is literally a soft spot in narrow
stile door security. Using special pliers, a pipe wrench or other leverage device, a
burglar can tear the cylinder out of the door, leaving an opening through which to
operate the deadlock. Against this problem, the MS4043 Cylinder Guard offers a
three-way defense: 1.The outer shield ring is fully beveled to offer poor purchase
for either prying or twisting. 2. This ring is hardened steel so that the combination
of shape and hardness make it virtually impossible to grip, even with sharpened
tools. 3. In the event that a prying tool such as a cold chisel can be driven into the
stile behind the shield ring, the would-be burglar is obliged to pull a heavy steel
plate through a round hole in the 1/8" metal door stile. This degree of leverage is
far beyond that available with most hand tools.
Specifications
SECURITY RING
• Made of hardened steel. Free-swiveling when properly
installed.
RETAINER RING
• Hardened steel, plated for corrosion resistance. Permits
security ring to swivel.
TRIM FINISH
• Powdercoat to match 130 (Aluminum Satin), 121 (Dark
Bronze), and 119 (Black).
OPTIONS
• MS4043 Cylinder Guard fits a standard 1/8" stile wall. For
1/4" thick stile walls, specify MS4043-01.
STANDARD PACKAGE
• Individually packaged with spacers for flush fitting in
thin stile walls. Cylinders available separately. Shipping
weight: 1/8 lb.
MS4043 CYLINDER GUARD
HOLLOW
METAL
ALUMINUM
22-0947
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
CYLINDERS C-5
1-15/32"
37.3mm
5/8"
15.9mm
1-9/32"
32.5mm
7/16"
11.1mm
1-1/2"
38.1mm
DIA.
1-11/32"
34.1mm
23/32"
18.3mm
1/8"
3.2mm
1/4"
6.4mm
1-5/8"
41.3mm
DIA.
STILE WALL
MINIMUM
CYLINDER
CAM TO
SHOULDER*
LOCK
BACKSET
LOCK FACE
CUTOUT
CYLINDER LENGTH
(INCLUDING CAM)*
SECURITY RING
(HARDENED STEEL)
SPACER(S) TO FIT
STILE WALL IF THINNER
THAN NORMAL
OR
RETAINER
RING
*Contact factory regarding
non-standard dimensions
DIA.
NOTE:
Guard may be used on outside only
or on both outside and inside of a
double-cylinder lock.
FACE “OPEN” SIDE OF RETAINER TOWARD
MINIMUM CLEARANCE DIRECTION (TOWARD
NOSE OF DOOR ON 7/8” OR 31/32” BACKSET
LOCKS, AWAY ON 1-1/8” BACKSET).
3/8"
9.5mm
MS4043 CYLINDER GUARD
MS4043 CYLINDER GUARD
Specify quantity and the following information. Order related products separately.
PRODUCT NO. STILE WALL & CYLINDER FINISH
MS4043 -01 -130
Stile Wall Cylinder 119 To match 335 Black Anodized
00 1/8" 5 or 6 pin 121 To match 313 Dark Bronze Anodized
01 1/4" 5 or 6 pin 130 To match 628 Clear Anodized
02 1/8" 1.31” to 1.435” long
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks Deadlatches Flushbolts Exit Devices
1830, MS1837, MS1850S(-050), MS1850SN(-050), MS1861,
1875, MS+1890, MS1950(-050), 2190, 2290
4300, 4510, 4530, 4900,
4920AN
1870, 1870HM 8300, 8400
Installation
Dimensions Stile Preparation
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
C-6 CYLINDERS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
4000 Series MS® Deadlock Strikes add aesthetics
and finish to strike cutouts in jambs.
4000 Series MS®
Deadlock Strikes
Function
The majority of Adams Rite MS® deadlocks are installed in metal construction where
the strike cutout can be simply a slot in the jamb. However, for aesthetic reasons or in
the case of the MS4002 for added security, many who specify the MS deadlock add
one of these strikes.
Specifications
4000 TRIM STRIKE
• A simple strike plate that can be surface mounted on a wood or metal jamb or
mortised flush. Furnished with two #10 flat head machine screws and two #10 flat
head wood screws.
• Material & Finish: Made of aluminum. Available in US28 (628), clear anodized,
313 dark bronze anodized, and 335 black anodized.
4001 BOX STRIKE
• Same trim plate as 4000, but with dust box added. Customarily
used only for wood construction where the dust box prevents
chips, sawdust, and other debris from entering strike. Furnished
with both wood and machine screws.
• Material & Finish: Trim plate is aluminum, box is steel
plated for corrosion resistance. Available in US28 (628)
clear anodized, 313 dark bronze anodized, and 335
black anodized.
MS4002 ARMORED STRIKE
• Same trim plate as 4000 and 4001, but backed up by a
massive steel doubler designed to prevent the method of
forced entry known as “jamb peeling”. Fits within aluminum
or other hollow jamb sections with trim face flush, the steel
completely hidden. Available flat or radiused, for pairs of
doors*, and to fit all MS® deadlocks, including the hookbolt
version in sliding doors (hookbolt use dictates door/jamb
gap of 1/8" or less). Unhanded, may be used with RH or LH
swinging or sliding doors.
*Can be used with two-point and three-point MS locks.
• Material & Finish: Trim plate is aluminum. Reinforcement
doubler is steel plated for corrosion resistance. Available in
US28 (628), clear anodized, 313 dark bronze anodized, and
335 black anodized.
4003 ANSI STRIKE
• The 4003 strike is designed for ANSI applications for use with
the MS1850SN Deadlock.
• Material & Finish: Trim plate is stainless steel. Available in
605 bright brass, 626 satin chrome and 119 black and 121
dark bronze.
4005 THRESHOLD STRIKE
• The 4005 Threshold Strike is designed for a drop-bolt such
as 4015 Threshold Bolt or 4016 Header Bolt in non-metal
installations such as wood or concrete.
• Material & Finish: Trim plate is stainless steel. Available in
630 satin stainless steel.
4006 FLOOR STRIKE
• Similar to 4001 Box Strike, the 4006 Floor Strike is a trim plate
with dust box added for strike slot cut into metal thresholds.
Designed for use with the 1830 Bottom Rail Deadlock.
• Material & Finish: Trim plate is stainless steel. Available in
630 satin stainless steel, 119 black and 121 dark bronze.
OPTIONS
• Specify flat or radius shape of trim plate, round or
square corners and lock compatibility when ordering.
4003-01 ANSI-dimensional lipped strike also available
for MS1850SN Deadbolt.
4000 SERIES MS® DEADLOCK STRIKES
ALUMINUM HOLLOW
METAL
WOOD
MS4002-012
4000-012
4001-032
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ACCESSORIES A-1
CYLINDER
*FOR
HOOKBOLT
ONLY:
DUST BOX
TRIM
PLATE
MAY BE
SURFACE
MOUNTED
OR
MORTISED
HOOKBOLT
REQUIRES
JAMB GAP
OR LESS
R
DRILL AND CSK FOR
#10 FLAT HEAD
MACHINE SCREWS
(2 PLACES)
FOUR SCREWS
FURNISHED
MOUNTING
HOLES
FOR 3PT
ROD GUIDE
TRIM
PLATE
1/2"*
12.7mm
53/64"
21mm
1-1/4"
31.8mm
1-1/4"
31.8mm
11-47/64"
298.1mm
9-1/2"
241.3mm
1-1/4"
31.8mm
1-1/2"
38.1mm
4-1/8"
104.8mm
1/8"
3.2mm 1/8"
3.2mm
4-7/8"
123.8mm
4-1/8"
104.8mm
4-7/8"
123.8mm
1/32"
.8mm
3-7/16"
87.3mm
5/32"
4mm
4-57/64"
124.2mm
1-17/64"
32.1mm
1-1/8"
28.6mm
1/8"
3.2mm
1/8"
3.2mm
4-7/8"
123.8mm
4-1/8"
104.8mm
4000 Trim Strike
Strike plate only
4001 Box Strike
Strike plate with dust box
MS4002 Armored Strike
Strike plate with Reinforcement
4000 SERIES MS® DEADLOCK STRIKES
HOW TO ORDER 4000, 4001, MS4002 DEADBOLT STRIKES
Specify quantity and the following information. Order related products separately.
STRIKE MODEL TRIM PLATE SHAPE COMPATIBLE DEADLOCK TRIM PLATE CORNERS FINISH
4001 -0 1 1 -313
4000 Trim Strike 0 Flat 1 All Standard MS® locks with 1-3/8" Bolt Throw 1 Square 313 Dark Bronze Anodized
4001 Box Strike 1 Radius 2 1850A-020 with 3/4" Bolt Throw Only 2 Round 335 Black Anodized
MS4002 Armored Strike 3 All MS-050 "Hookbolt" locks 628 Clear Anodized
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks
Most Adams Rite Deadlocks
Dimensions Mortise Jamb Installation
Hollow Channel Jamb Preperation
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
A-2 ACCESSORIES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
4015 Threshold Bolt is a two-point lock that easily
secures a double door entrance.
4015
Threshold Bolt
Function
Adding the 4015 Threshold Bolt to a pivoted bolt MS® deadlock allows Maximum
Security for pairs of doors by the turn of a single key. Simultaneously dropping a
stainless steel hexbolt into the threshold and pivoting the massive MS® bolt into
the mating door’s stile, the two-point lock secures the entire double door entrance.
The 4015 threshold bolt is harnessed to the rear of the pivoted bolt. It may be
added to any basic MS1850S or MS1850SN deadbolt.
Operation
360° turn of key or thumbturn in basic MS® deadlock throws
counterbalanced bolt into opposite door and drop-bolt into
threshold. Key can be removed only when bolts are in a
positively locked or unlocked position.
Specifications
CYLINDER HEIGHT
• Standard threshold bolt rod is sufficient for cylinder height
up to 53-7/16". It is fully threaded and can be cut off for
low cylinder heights. Also available to volume users, cut
and threaded only for specific cylinder heights.
ADJUSTMENT
• Exact adjustment of threaded rod to cylinder heights is
locked in place by hexagonal threshold bolt
STRIKE
• For drop-bolt, a 1/2" diameter hold in metal threshold
is suitable. For non-metal installation, 4005 strike is
available.
THRESHOLD BOLT
• Hexagonal 3/8" flat to flat. Made of stainless steel.
OPTIONS
• For “universal” application, specify 4015-18 with fully
threaded rod for cut off to any cylinder heights below
53". For greater height or precut rod for high volume use,
specify exact cylinder height.
STANDARD PACKAGE
• Packed separately with bolt guide, screws, and
attachment pin. Shipping weight: 1lb.
4015 THRESHOLD BOLT
ALUMINUM GRADE 1
E8241
4005
STRIKE
BO LT
GUIDE
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ACCESSORIES A-3
ROD/BOLT LENGTH
MUST BE APPROX.
7"
177.8mm
LESS THAN
CYLINDER HEIGHT
SHOWN WITH
MS1851S LOCK
CYLINDER
HEIGHT
THRESHOLD
DIA.
BOLT
FOR BOLT GUIDE:
DRILL & CSK FOR
#10-32 FLAT HEAD
SCREWS ON
INTERIOR
FACE OF STILE
BOTTOM EDGE
OF DOOR
BOLT
PROJECTION
THROW
CUT OFF TO
SUIT LOW
CYLINDER
HEIGHTS
SHOWN
EXTENDED
ANY BASIC
MS® DEADBOLT
6"
152.4mm
9"
228.6mm
7/8"
22.2mm
11/16"
17.5mm
9/16"
14.3mm
11/16"
17.5mm
5/8"
15.9mm
1/2"
12.7mm
29/32"
23mm
5/8"
15.9mm
4015 THRESHOLD BOLT
SEE BASIC MS® DEADLOCKS
MS1850S, MS1850SN, MS1950, MS1950-050
INSTALL ADAPTOR ARM IN LOCK FROM REAR WITH BOLT
RETRACTED AS SHOWN. DRIVE PIN THROUGH SLOTS
IN LOCK SIDE PLATES PASSING THROUGH HOLE IN THE
ADAPTOR ARM.
HOW TO ORDER 4015 THRESHOLD BOLT
Specify quantity and the following information. Order related products separately.
ADD DASH NUMBER FOR
"UNIVERSAL SIZE" PACKAGING
4015 -18 -IB
IB Individually Boxed
If ordering in volume quantity for specific cylinder height, specify CYLINDER HEIGHT.
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related products,
available separately:
This product is compatible with the following products:
Accessories Deadlocks
4016 Header Bolt, 4085 Header Bolt. MS1850S(-050), MS1850SN(-050), MS1950(-050)
Dimensions Installation
Stile Preparation
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
A-4 ACCESSORIES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Security for pairs of doors with single key turning is
possible with the 4016 Header Bolt. The three-point lock
easily secures the entire double door entrance when
working in conjunction with an MS® Deadlock.
4016 Header Bolt
Function
Adding the 4016 Header Bolt and the 4015 Threshold Bolt to a pivoted bolt MS®
deadlock allows Maximum Security for pairs of doors by the turn of a single
key. Simultaneously extending the stainless steel hexbolts top and bottom and
pivoting the massive MS® bolt into the mating stile, the three-point lock secures
the entire double door entrance. The 4016 Header Bolt can be added to any
basic MS1850S, MS1850SN, MS1950 or for two-points top and bottom use with
1870/1870HM Cylinder-Operated Flushbolt. Not applicable to 7/8" backset locks.
Operation
360° turn of key or thumbturn in basic MS® deadlock throws
counterbalanced bolt into opposite door and hexagonal bolt into
header strike. Key can be removed only when bolts are in a
positively locked or unlocked position.
Specifications
DOOR/CYLINDER HEIGHT
• The standard version is designed for a 7’ door height with
cylinder height as low as 35". Added extension for up to a
10’ door available when ordering.
HEADER BOLT
• Hexagonal 3/8" flat to flat. Made of stainless steel.
ADJUSTMENT
• Exact adjustment of threaded rod to door height is locked
in place by hexagonal header bolt.
STRIKE
• For header bolt, a 1/2" diameter hole in metal frame
is suitable or, for non-metal installation, 4005 strike is
available.
STANDARD PACKAGE
• Packed separately with bolt guide, screws, and
attachment pin. Shipping weight: 1 lb.
4016 HEADER BOLT
ALUMINUM GRADE 1
E82111
4005
STRIKE
BO LT
GUIDE
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ACCESSORIES A-5
Stile preparation
DUE TO THE VARIETY OF CONSTRUCTION METHODS
EMPLOYED BY EACH DOOR MANUFACTURER,
CONSULT FACTORY FOR GUIDANCE IN SPECIAL
PREPARATION AND INSTALLATION REQUIREMENTS.
INSTALL ADAPTOR ARM TO LOCK FROM TOP WITH
BOLT RETRACTED AS SHOWN. INSTALL PIN THROUGH
SLOTS IN LOCK SIDE PLATES, PASSING THROUGH
HOLES IN BOTH SIDES OF THE ADAPTOR ARM.
4016 HEADER BOLT
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the
following related products, available separately:
This product is compatible with the following products:
Accessories Deadlocks Flushbolts
4015 Threshold Bolt, 4085 Header Bolt. MS1850S(-050), MS1850SN(-050), MS1950(-050)
Not applicable to 7/8" backset locks.
1870, 1870HM Cylinder-Operated Flushbolt.
Not applicable to 7/8" backset locks.
4016 HEADER BOLT
Specify quantity and the following information. Order related products separately.
LOCK BACKSET DOOR HEIGHT
4016 -30 -01
10 1-1/2" 01 7' Door
20 31/32" 02 10' Door
30 1-1/8"
Installation
THROW
TOP OF DOOR
BOLT
PROJECTION
SHOWN
EXTENDED
ANY BASIC
MS® DEADBOLT OR
1870 FLUSHBOLT
4016-30 FOR
1-1/8" BACKSET
CUT TO
SUIT
CYLINDER
HEIGHT
4016-20 FOR
31/32" BACKSET
4016-10 FOR
1-1/2" BACKSET
4016-20
SHOWN
WITH
MS1851S LOCK
11/16"
17.5mm
5/8"
15.6mm
1-13/32"
35.7mm
9/32"
7.1mm
4-3/4"
120.7mm
Dimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
A-6 ACCESSORIES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Top-of-Door third locking point for pairs of doors when
working in conjunction with an MS® pivoted bolt deadlock
and 4015 Threshold Bolt in the active leaf.
4085 Header Bolt
(Pairs of Doors Only)
Function
Designed to add a top-of-door third locking point for pairs of doors with an MS®
pivoted bolt deadlock and 4015 Threshold bolt in the active leaf. The 4085
Header Bolt is mounted in the inactive leaf. This additional bolt, triggered by the
pivoted MS® bolt, expands in a “scissors” action to center itself in its strike as it
rises. This action saves the key holder from the difficulty of lining up the doors
with three separate strikes, even if doors are misaligned due to faulty installation
or settling. The three-point features may be added to any basic MS1850S/
MS1850SN or MS1950 deadbolt.
Operation
360° turn of key or thumbturn in basic MS® deadlock throws
counterbalanced bolt into opposite door, kicking positioner
bolt into header strike. Positioner bolt may be manually
thrown before closing active leaf to reduce effort on key-bow.
Key can be removed only when bolts are in a positively
locked or unlocked position.
Specifications
HEADER BOLT
• 1/2" x 1-1/2" expanding bolt with 5/8" throw. Housed in
1-1/2" x 2-3/4" x 5/8" case.
ADJUSTMENT
• Minor adjustment of rod length is accomplished by
turning nylon rod end.
STANDARD PACKAGE
• Packed separately with rod guide, screws, and header
strike. Shipping weight: 1 lb.
4085 HEADER BOLT (PAIRS OF DOORS ONLY)
ALUMINUM GRADE 1
E8261
ROD GUIDE
HEADER
STRIKE
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ACCESSORIES A-7
STILE
PREPARATION
4085 HEADER BOLT (PAIRS OF DOORS ONLY)
TRAVEL
BREAK OFF
ASSEMBLY TAB
HEADER
STRIKE
#6-32 TAP
(2) HOLES
TOP OF DOOR
CYLINDER
OF MS® LOCK
25-0071
HEADER
STRIKE
FURNISHED
SHOWN
EXTENDED
“A”
DOOR
HEIGHT
LESS
CYLINDER
HEIGHT
1/4"
6.4mm
1/16"
1.6mm
1-19/32"
40.5mm
1-29/32"
48.4mm
1-1/2"
38.1mm
29/32"
23mm
1-15/32"
37.3mm
5/8"
15.9mm 1/8"
3.2mm
1-1/2"
38.1mm
1-1/2"
38.1mm
1-1/2"
38.1mm
3/8"
9.5mm
1/2"
12.7mm
1/2"
12.7mm
1/2"
12.7mm
2-3/4"
69.9mm
3-27/32"
97.6mm
11/16"
17.5mm
BREAK OFF
TAB AFTER
INSERTING
SCREWS
DRILL & CSK FOR
#10 FLAT HEAD
SCREWS (4)
1-1/2"
38.1mm
1/4"
6.4mm
1-3/4"
44.5mm
1"
25.4mm
STRIKE CUTOUT FOR
MS® LOCK
(CAN ALSO BE USED
WITH MS4002
ARMORED STRIKE)
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related products,
available separately:
This product is compatible with the following products:
Accessories Deadlocks
4015 Threshold Bolt. MS1850S(-050), MS1850SN(-050), MS1950(-050).
Not applicable to 7/8" backset locks.
4085 HEADER BOLT
Specify quantity and the following information. Order related products separately.
DIMENSION 'A' PACKAGING
4085 -02 -IB
01 30" - 52" IB Individually Boxed
02 52" - 67"
03 67" - 79"
04 79" - 92"
example
Door Height Cylinder Height A
96" -40" =56"
Reference:
7’ Door is 84”
8’ Door is 96”
9’ Door is 108”
10’ Door is 120”
Header Preparation for StrikeDimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
A-8 ACCESSORIES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
The 4089 Exit Indicator provides exit door notification for
various Adams Rite deadlocks.
4089 Exit Indicator
Function
Provides unmistakable notification of an exit door’s “locked” or “open” condition.
Under many local building safety codes, this allows the use, in certain
occupancies, of a security deadlock instead of less secure panic devices. It
includes two permanent adhesive header signs: “THIS DOOR TO REMAIN
UNLOCKED DURING BUSINESS HOURS.” (that wording is according to Uniform
Building Code). The second sign for NFPA and other local codes reads: “THIS
DOOR TO REMAIN UNLOCKED WHEN THE BUILDING IS OCCUPIED.”
Specifications
MESSAGE PANEL
• “OPEN” appears in black letters on white background
when lock is retracted and “LOCKED” in red letters
when actuated. Also available with red (locked) and
green (unlocked) wordless panels.
MATERIAL/FINISH
• Indicator escutcheon is zinc alloy with 130 (Satin
Aluminum) finish. Also available in 119 satin black and
121 dark bronze. Header sign is clear aluminum match
with black letters.
OPTIONS
• Standard unit fits 1-3/4" doors. Specify for thicker doors
up to 2-1/2".
STANDARD PACKAGE
• Shipping weight: 1/2 lb.
4089 EXIT INDICATOR
ALUMINUM HOLLOW
METAL
WOOD
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ACCESSORIES A-9
HEADER SIGN - IN TWO PIECES*
CYLINDER
CUTOUT
BACKSET
DRILLDIA.
TAP 8-32
(2 PLC’S)
IN WOOD:
PILOT HOLE
(2 PLC’S)
USE PLAIN PIN FOR
BASIC MS® LOCK
#8 MTG.
SCREWS
(2 REQ.)
USE SHOULDER PIN
FOR 2-PT. MS® LOCK
OPTIONAL – P/N 22-0819
4016 PIN COVER PLATE
(4 PLC’S)
R
*THIS SIGN CORRECT UNDER UNIFORM BUILDING CODE. ALSO INCLUDES NFPA WORDING
“THIS DOOR TO REMAIN UNLOCKED WHEN THE BUILDING IS OCCUPIED”.
CYLINDER
CYLINDER
CUTOUT
BACKSET
DIA. (2 PLC’S)
TAP 8-32 (2 PLC’S)
3-1/8"
79.4mm
1/16"
1.6mm
1-7/8"
47.6mm
5/8"
15.9mm
19/32"
15.1mm
7/8"
22.2mm
1-7/8"
47.6mm
2-5/8"
66.7mm
11/32"
8.7mm
3-1/8"
79.4mm
3/8"
9.5mm
1-7/8"
47.6mm
1-1/8"
28.6mm
1-1/8"
28.6mm
5/32"
4mm
3/32"
2.4mm
7/32"
5.6mm
11/32"
8.7mm
1-1/2"
38.1mm
1"
25.4mm
1/4"
6.4mm 15"
381mm
1-11/32"
34.1mm
1"
25.4mm
4089 EXIT INDICATOR
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following
related products, available separately:
This product is compatible with the following products:
Accessories Deadlocks Flushbolts
91-0912 Adapter Plate, 20-0255-IP Header Sign,
20-0256-IP IBC Header Sign, 22-0819 Pin Cover
Plate for 4016.
MS1830, MS1837, MS1850S(-050), SCH1850S,
MS1850SN(-050), SCH1850SN, MS1950(-050), MS+1890.
1870 Cylinder-Operated Flushbolt.
4089 EXIT INDICATOR
Specify quantity and the following information. Order related products separately.
OPTIONS FINISH
4089 -01 -130
00 Standard 1-3/4" Door 119 To match 335 Black Anodized
01 For Inverted Lock 121 To match 313 Dark Bronze Anodized
20 For Doors up to 2-1/2" 130 To match 628 Clear Anodized
Standard unit fits 1-3/4” doors
FOR 31/32" OR 1-1/8" BACKSET
FOR 1-1/2" BACKSET
Aluminium Stile Preparation
Wood and Hollow Metal
Stile Preparation
Dimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
A-10 ACCESSORIES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
4800 Series Strikes add aesthetics and finish to strike
cutouts in jambs.
4800 Series Strikes
4800 Series
Function
With vertical adjustment to accommodate door/jamb
misalignment and a shim system for horizontal positioning to
match various jamb bumper designs, the 4800 Series Strikes
can be fit to nearly any sliding door using a mortised MS1847
Deadlock or latch. 4801 strikes are furnished with sheet metal
screws for metal jamb installation. 4802 strikes are furnished
with machine screws and tee nuts which are installed on
the back side of the jamb to provide the strongest possible
anchorage in wood.
Specifications
MATERIAL
• Steel, heat treated. Shims are ABS plastic.
Zinc (603) finish.
MS4804
Function
This reinforcing strike provides strength equal to the strength of
the stainless steel bolt of the MS1847 Deadlock: tested to 1,000
lbs. of force. This strength by far exceeds the standards of the
Architectural Aluminum Manufacturers Association as well as
the strictest current municipal security ordinance.
Specifications
FACEPLATE
• Measures 1/16" x 3/4" x 3-3/8". Steel, plated for corrosion
resistance. MS4804-10 available in stainless steel.
REINFORCING PLATE
• Measures 1/16" x 1/2" x 3-3/8". Steel, plated for corrosion
resistance. Tapped for furnished #10-32 flathead screws.
STANDARD PACKAGE FOR BOTH 4800 AND 4804
• All strikes are individually packaged in envelope with
screws and shim if required.
4800 SERIES STRIKES
MS4804
4801-01
WITH SHIM
HOLLOW
METAL
WOOD
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ACCESSORIES A-11
STRIKE WIDTH
VERTICAL
ADJUSTMENT
MS1847
STRIKE
LOCK &
STRIKE
SHIM(S)
AS REQUIRED
BOLT
CLEARANCE
CUTOUT
TYP.
R
10-32 UNF
INSERT REINFORCING
PLATE THROUGH BOLT
CLEARANCE HOLE
SHIM
LENGTH
SHIM WIDTH
‘A’
9/16"
14.3mm
3-15/16"
100mm
2-13/16"
71.4mm
1-11/16"
42.9mm
2-13/16"
71.4mm
1-13/16"
46mm
1-1/8"
28.6mm
1"
25.4mm
4"
101.6mm
1-1/4"
31.8mm
3/8"
9.5mm
3/8"
9.5mm
2-9/16"
65.1mm
5/8"
15.9mm
1/2"
12.7mm
3/4"
19.1mm
3/4"
19.1mm
13/32"
10.3mm
2-9/16"
65.1mm
1-3/16"
30.2mm
1"
25.4mm
7/16"
11.1mm
3-3/8"
85.7mm
3/8"
9.5mm
1/2"
12.7mm
1/8"
3.2mm
53/64"
21mm
ONE OR MORE SHIM’S MAY BE USED
TO ACHIEVE GREATER PROJECTION ‘A’
FROM JAMB (ONE SHIM SHOWN)
SEE TABLE BELOW
FOR HOLE SIZE
CLEARANCE HOLE FOR #10 SCREW
ELONGATED TO ALLOW VERTICAL
ADJUSMENT OF STRIKE
4800 Series 4800 Series
MS4804
MS4804
4800 SERIES STRIKES
APPLICATION PART NO. SHIMS DIMENSION 'A'
METAL JAMBS (furnished with two #8 x 1
sheet metal screws
4801 NONE 0
4801-01 13/32" (2.4mm)
4801-02 23/16" (4.8mm)
4801-03 39/32 " (7.1mm)
WOOD JAMBS (furnished with two #8-32 x 7/8"
machine screws and two tee nuts)
4802 NONE 0
4802-01 13/32" (2.4mm)
4802-02 23/16" (4.8mm)
4802-03 39/32 " (7.1mm)
HOLE SIZE
METAL JAMB APPLICATION
4801 SERIES
1/8"
3.2mm (No. 31 DRILL)
WOOD JAMB APPLICATION
4802 SERIES
7/32"
5.6mm (No. 3 DRILL)
4800, MS4804 STRIKES
Specify quantity and the following information. Order related products separately.
TYPE OF JAMB DIMENSION 'A'
480 1-02
1 Metal 01 3/32"
2 Wood 02 3/16"
03 9/32"
FINISH
MS4804 -630
630 Satin Stainless
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks
MS1847 Deadlock
Jamb PreparationDimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
A-12 ACCESSORIES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
4901, 4902 Deadlatch Strikes add aesthetics and finish to
strike cutouts in jambs.
4901, 4902
Deadlatch Strikes
Function
Designed for use in conjunction with 4300, 4500, 4700, and 4900 Series
Deadlatches, these strikes offer a choice of mounting methods; a backup mounting
plate included with the 4901 and 4902 allows installation flush in a hollow section
jamb. Use 4506-02 ANSI strike for wood or steel jambs. All strikes are unhanded,
suitable for right or left hand doors. Strike plate material is stainless steel.
4901-01
Standard slat strike includes molded black plastic dust box
and closure of the unused lower strike opening, with steel
mounting plate. Long face is designed to span strike area of
MS® deadlocks with which the deadlatch is interchangeable.
4901-02
Same as 4901-01, except with radiused strike plate, for nose
of opposite door when latching pairs.
4902-01
Standard flat strike furnished with the 4900 Series Heavy
Duty Deadlatches. Includes molded black plastic dust box
and steel mounting plate. Short face design.
4902-02
Same as 4902-01, except with radiused strike plate, for nose
of opposite door when latching pairs.
4901, 4902 DEADLATCH STRIKES
Accomodates the 1/2" wide
latchbolt of 4500/4700 latches
and 5/8" wide latchbolt of
the 4900 Series by removing
snap-in nylon insert.
4901-01
4902-01
ALUMINUM HOLLOW
METAL
WOOD
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ACCESSORIES A-13
4901, 4902 DEADLATCH STRIKES
10-32 TAP
CSK FOR #10
FLAT HEAD
10-32 TAP
CSK FOR #10
FLAT HEAD
MOUNTING
PLATE
DEADLATCH
IN DOOR
CYLINDER
4500, 4900 OR
EXISTING 4700
CYLINDER
4500, 4900 OR
EXISTING 4700
DRILL AND CSK
FOR #10 FLAT
HEAD SCREWS
FURNISHED WITH FOUR
#10-32 X 1/2 FLAT HEAD
MACHINE SCREWS
STRIKE
PLATE
MOUNTING
PLATE
STRIKE
PLATE
DUST
BOX
DIM: ‘A’
DUST
BOX
4901-01 FLAT
WITH DUST BOX &
MOUNTING PLATE
4901-02 RADIUS
WITH DUST BOX &
MOUNTING PLATE
4902-01 FLAT
WITH DUST BOX &
MOUNTING PLATE
4902-02 RADIUS
WITH DUST BOX &
MOUNTING PLATE
DEADLATCH
IN DOOR
DRILL AND CSK
FOR #10 FLAT
HEAD SCREWS
R
FURNISHED WITH FOUR
#10-32 X 1/2 FLAT HEAD
MACHINE SCREWS
3/8"
9.5mm
3/8"
9.5mm
3/8"
9.5mm
3/8"
9.5mm
11/32"
8.7mm
2-15/32"
62.7mm
1-3/16"
30.2mm
9/16"
14.3mm
9/16"
14.2mm
9/16"
14.2mm
9/16"
14.3mm 1/16"
1.6mm
1/16"
1.6mm
3/8"
9.5mm
3/8"
9.5mm
5/32"
4mm
3-3/8"
85.7mm
37/64"
14.7mm
37/64"
14.7mm
5-3/8"
136.5mm
4-41/64"
117.9mm
2-41/64"
66.2mm
5/32"
4mm
7/64"
2.8mm
7/64"
2.8mm
11/32"
8.7mm
1/8"
3.2mm
1/8"
3.2mm
6-1/8"
155.6mm
5-3/8"
136.5mm
4-5/8"
117.5mm
3-7/8"
98.4mm
3/4"
19.1mm
3/4"
19.1mm
3/4"
19.1mm
1-1/8"
28.6mm
1-1/8"
28.6mm
1-1/8"
28.6mm
1-1/8"
28.6mm
1-1/8"
28.6mm
2-5/8"
66.7mm
1-7/8"
47.6mm
4-1/8"
104.8mm
3-3/8"
85.7mm
43/64"
17.1mm
43/64"
17.1mm
R
R
2-15/32"
62.7mm
1-3/16"
30.2mm
R
DIM: ‘A’
4901, 4902 DEADLATCH STRIKES
Specify quantity and the following information. Order related products separately.
STRIKE TYPE FACEPLATE SHAPE
490 1-02
Standard Lip
1 Long 01 Flat
2 Short 02 Radius
Long Lip for Center Hung Door DIM. 'A'
03 2-1/4" Wide Jamb 13 3-1/2" Wide Jamb 1-1/8 1-3/4
05 2-1/2" Wide Jamb 15 3-3/4" Wide Jamb 1-1/4 1-7/8
07 2-3/4" Wide Jamb 17 4" Wide Jamb 1-3/8 2
09 3" Wide Jamb 19 4-1/4" Wide Jamb 1-1/2 2-1/8
11 3-1/4" Wide Jamb 21 4-1/2" Wide Jamb 1-5/8 2-1/4
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlatches
4300 eLatch Electrified Deadlatch
4500 Series Standard Duty Deadlatch
4900 Series Heavy Duty Deadlatch
Note that 4700 Deadlatch is discontinued and replaced by 4900 Deadlatch.
Installation
4901 4901
4902 4902
Dimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
A-14 ACCESSORIES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Lock mounting methods for narrow stile aluminum doors
– the three most prevalent methods of mounting locks
and latches within the hollow tube stile of glass doors are
shown in the accompanying illustrations.
Lock Mounting
Methods
Method A: 4104 Mounting Bridge
Method “A” spans the stile with a steel bridge at the top and bottom of the lock. A
simple handle (Adams Rite Installation Tool 4075) is used to position the bridge
accurately in the stile while its two screws are tightened to form a “web” in the
door. Resilient washers allow for minor adjustment to fit the lock flush in the door.
Method B: 26-00090XX Tube Spacer
Method “B” requires two tapped holes in the back web of the stile and tubular
spacers of appropriate lengths. Some door manufacturers use a heavy coil spring
in place of the tube to allow for minor adjustment.
Method C: 91-0965 Kit for Radiused
Door, 91-0966 Kit for Beveled Door
Method “C” was developed for use in Aluminum door jams for the purpose of
retrofitting locks into existing doors. Its edge of the door location allows for easy
application, reduces risk of door damage, particularly when used in glass doors,
and makes drilling an easier process. It can also be used in metal or steel doors.
Lock Mounting Method
for Hollow Metal Doors
Hollow metal doors with hardware preparation per ANSI
standards have welded-in lock mounting tabs and require no
modification to accept a lock manufactured with a mounting
pattern conforming to these standards. (Examples: MS1850SN
Deadlock and 4920AN Heavy Duty Deadlatch)
Lock Mounting Method
for Wood Doors
A stepped mortise cutout is required in wood door installations.
This mortise can be accomplished most easily with a router,
but hand drill and chisel methods will suffice for single or low
volume installations.
LOCK MOUNTING METHODS
4104
BRIDGE
LOCK
MOUNTING
PLATE
LOCK
MOUNTING
PLATE
LOCK
MOUNTING
PLATE
MOUNTING
SCREW
TAPPED
HOLE
TUBE
SPACER
RESILIENT
WASHER
4104 MOUNTING BRIDGE
26-0009-XX
TUBE SPACE
91-0965 KIT
FOR RADIUSED DOOR
91-0966 KIT
FOR BEVELED DOOR
MOUNTING
SCREW
MOUNTING
CLIP
MOUNTING
SCREW
1/4"
6.35mm
Method A
Method B
Method C
ACCESSORIES A-15
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
Power supply with optional battery backup for all 3000
and 8000 exit devices with Silent Electrification Motorized
Latch Retraction (SE) option.
PS-SE Power Supply
Function
This power supply is required for the Silent Electrification Motorized Latch
Retraction (SE) option on Adams Rite exit devices. It operates at 24 VDC to power
up to two SE exit devices in sequential or independent modes. The PS-SE is also
equipped with a fire alarm disconnect interface circuitry.
Operating Modes
The PS-SE is designed to power up to two 3000 SE or 8000
SE exit devices in the following operating modes:
• Sequential Mode – A single input switch (Dry Contact)
operates two devices in sequential operation. Ideal for a
double-door setup.
• Independent Mode – Each SE exit device is controlled
by its own input switch.
Specifications
UL1012 + UL1310
INPUT POWER
• 115 VAC, 0.7A
PRIMARY FUSE
• The PS-SE has two user-serviceable fuses:
• F1: Transformer output: 2AMPS/250V 5x20MM
• F2: Transformer input: 2AMPS/250V 5x20MM
OPEN HOLD TIMES
• The PS-SE has two open hold timers. Hold open time
settings are adjustable from 2-60 seconds.
ENCLOSURE
• Hinged, steel cabinet measures 10” x 10-3/8” x 4-1/8”.
Black, baked enamel finish, with knockouts for conduit
connections. Sized to accommodate two sealed, lead
acid batteries (7AH, not included).
OPTIONS
• Battery Backup Kit (BBK-SE) available separately
to add battery backup capability to the PS-SE. The
enclosure is sized to accommodate two 12 volt – 7AH
sealed, lead acid batteries (not included).
Important Note
Adams Rite requires that for optimal performance all exit
devices with the SE option be paired with PS-SE power
supplies. Failure to do so may cause permanent damage to
the exit device and will void the Manufacturer’s warranty.
PS-SE POWER SUPPLY
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
POWER P-1
PS-SE POWER SUPPLY
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following
related products, available separately:
This product is compatible with the following products:
Accessories Power Deadlatches Electric Strikes Exit Devices Trim
BBK-SE Battery
Backup Kit.
4612 Power Transfer Device. 4300 Electrified
Deadlatch
7100, 7200, 7400
Series Electric Strikes
All electrified exit
devices with SE Silent
Electrification Motorized
Latch Retraction
3080 Entry Trim,
3090P/3090C
Keyless Entry
HOW TO ORDER PS-SE POWER SUPPLY
Specify quantity and the following information. Order related products separately.
POWER SUPPLY
PS -SE
SE Power Supply for exit devices w/ SE option
Layout & Wiring
Dimensions
GROUND
POINT
CH1
CH2
115 VAC
0.7A
POWER INPUT
14 AWG WIRE SIZE
INPUT #2
N.O. DRY CONTACT SWITCH
RATED FOR 15mA PEAK @ 24VDC
FIRE ALARM DISABLE
N.C. CONTACTS: 120 mA @ 24VDC
EXIT DEVICE #1
EXIT DEVICE #2
INPUT #1
N.O. DRY CONTACT SWITCH
RATED FOR 15mA PEAK @ 24VDC
J5
MAIN
POWER
C
A
C
B
B
A
MODE
SW1
OUTPUT
POWER
D1
230V
SW2
120V
N
L
J4
+
FUSE 2
2.0A
SLOW-BLOW
ASS'Y NUMBER
29-0623-02
TRANSFORMER
MAIN POWER
INDICATOR
OUT2
OUT1
9
OUT1
6
7
8
FIRE
10
BACKUP
BATT
J1
IN2
IN1
IN2
IN1
1
2
3
4
BLK
-
J3
OUT2
5
RED
+
-
BLK
12V
7AH
6"L x 2.5"W x
3.8"H
6"L x 2.5"W x
3.8"H
(OPTIONAL)
GROUND
LIVE/HOT
NEUTRAL
BATTERY BACKUP KIT
(OPTIONAL)
P/N:BBK-SE
FUSE 1
12V
7AH
(OPTIONAL)
RED
2.0A SLOW-
BLOW
1-13/64"
30.6mm
10"
254mm
9-1/4"
235mm
4-1/8"
104.8mm
10-3/8"
263.5mm
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
P-2 POWER
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
One amp linear power supply with integrated battery
backup circuitry for electric strikes, maglocks, and other
access control devices.
PS-1 Power Supply
Function
Provides filtered and regulated voltage output to power electric strikes, magnetic
locks, or other access control devices. Output is selectable in the field for 12 or 24
VDC. Charging circuit is built in for battery backup power (batteries not included)
with 12 or 24 VDC operation. LED on circuit board indicates power input.
Specifications
UL 294
INPUT POWER
• 110 VAC, 60 Hz, 0.5A
OUTPUT VOLTAGE
• Field-selectable 12 or 24 VDC, 1 Amp. (Maximum 13.8
VDC/27.6 VDC)
PRIMARY FUSE
• 800 mA, 5 x 20MM
BATTERY FUSE
• 2 Amps, 5 x 20MM
FIRE ALARM
• UL listed low current fire alarm disconnect requires only
a minimum size fire alarm relay and wire gauge.
ENCLOSURE
• Hinged, steel cabinet measures 12-1/8” x 4” x 12-1/8”.
Beige, baked enamel finish with knockouts for conduit
and key lock. Sized to accommodate two sealed, lead
acid batteries (4AH, not included).
OPTIONS
• 4612 Power Transfer Device available separately.
Enclosure sized to accommodate two sealed, lead acid
batteries (4 AH, not included).
PS-1 POWER SUPPLY
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
POWER P-3
PS-1 POWER SUPPLY
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following
related products, available separately:
This product is compatible with the following products:
Accessories Power Deadlatches Electric Strikes Exit Devices Trim
Batteries not included.4612 Power Transfer Device. 4300 Electrified
Deadlatch.
7100, 7200, 7400
Series Electric Strikes.
All electrified exit devices
without Motorized Latch
Retraction.
3080 Entry Trim,
3090P/3090C
Keyless Entry.
HOW TO ORDER PS-1 POWER SUPPLY
Specify quantity and the following information. Order related products separately.
POWER SUPPLY
PS -1
1 Standard Power Supply
Layout & Wiring
Dimensions
1-1/2"
38.1mm
12-1/8"
308mm
8-3/4"
222.3mm
4"
101.6mm
12-1/8"
308mm
GRN (GND)
BLK (HOT)
WHT (NEU)
PRIMARY FUSE
(800 mA, 5 X 20mm)
OUTPUT VOLTAGE
SELECTION
BATTERY FUSE
(2 AMP, 5 X 20mm)
STANDBY
BATTERY
TERMINALS
OUTPUT (+)
CONNECTED
SPARES
OUTPUT (-)
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
P-4 POWER
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
PS-LR Power Supply
Linear power supply with optional battery backup for
vertical rod and mortise type exit devices with electric latch
retraction (LR) option.
Function
This Adams Rite power supply is strongly recommended for the electric latch
retraction (LR) option on vertical rod and mortise types of exit devices. It operates
at 28 VDC to power up to two LR exit devices in sequential or independent
modes. The PS-LR is also equipped with a fire alarm disconnect interface circuitry.
Operating Modes
The PS-LR is designed to power up to two 3000 LR or 8000
LR exit devices in the following operating modes:
• Sequential Mode – A single input switch (dry contact)
operates two devices in sequential operation. Ideal for a
double-door setup.
• Independent Mode – Each LR exit device is controlled
by its own input switch.
Specifications
UL1012 + UL1310
CAN/CSA - C22.2 NO. 223
INPUT POWER
• 115 VAC or 230 VAC, 0.7A/0.4A
PRIMARY FUSE
• The PS-LR has two user-serviceable fuses:
• F1: Transformer output: 4.0A/250V 5x20MM
• F2: Transformer input: 3.15A/250V 5x20MM
OPEN HOLD TIMES
• The PS-LR has two open hold timers. Hold open time
settings are adjustable from 2-60 seconds.
ENCLOSURE
• Hinged, steel cabinet measures 10” x 10-3/8” x 4-1/8”.
Blue, baked enamel finish, with knockouts for conduit
connections. Sized to accommodate two sealed, lead
acid batteries (7AH, not included).
OPTIONS
• Battery Backup Kit (BBK-LR) available separately
to add battery backup capability to the PS-LR. The
enclosure is sized to accommodate two 12 volt – 7AH
sealed, lead acid batteries (not included).
PS-LR POWER SUPPLY
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
POWER P-5
PS-LR POWER SUPPLY
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following
related products, available separately:
This product is compatible with the following products:
Accessories Power Deadlatches Electric Strikes Exit Devices Trim
BBK-LR Battery
Backup Kit. 4612 Power Transfer Device. 4300 Electrified
Deadlatch.
7100, 7200, 7400
Series Electric Strikes.
All electrified exit devices
with LR Latch Retraction.
3080 Entry Trim,
3090P/3090C
Keyless Entry.
HOW TO ORDER PS-LR POWER SUPPLY
Specify quantity and the following information. Order related products separately.
POWER SUPPLY
PS -LR
LR Power Supply for exit devices w/ LR option
Dimensions
Layout & Wiring
1-13/64"
30.6mm
10"
254mm
9-1/4"
235mm
4-1/8"
104.8mm
10-3/8"
263.5mm
GROUND
POINT
CH1
CH2
115 VAC / 230 VAC
0.7A / 0.4
POWER INPUT
14 AWG WIRE SIZE
INPUT #2
N.O. DRY CONTACT SWITCH
RATED FOR 15mA PEAK @ 28VDC
FIRE ALARM DISABLE
N.C. CONTACTS: 120 mA @ 28VDC
EXIT DEVICE #1
EXIT DEVICE #2
INPUT #1
N.O. DRY CONTACT SWITCH
RATED FOR 15mA PEAK @ 28VDC
J5
MAIN
POWER
C
A
C
B
B
A
MODE
SW1
OUTPUT
POWER
D1
230V
SW2
120V
N
L
J4
+
FUSE 2
3.15A
SLOW-BLOW
ASSEMBLY NUMBER
29-0623
TRANSFORMER
MAIN POWER
INDICATOR
OUT2
OUT1
9
OUT1
6
7
8
FIRE
10
BACKUP
BATT
J1
IN2
IN1
IN2
IN1
1
2
3
4
BLK
-
J3
OUT2
5
RED
+
-
BLK
12V
7AH
6"L x 2.5"W x
3.8"H
6"L x 2.5"W x
3.8"H
(OPTIONAL)
GROUND
LIVE/HOT
NEUTRAL
BATTERY BACKUP KIT
(OPTIONAL)
P/N:BBK-LR
FUSE 1
12V
7AH
(OPTIONAL)
RED
4.0A SLOW-
BLOW
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
P-6 POWER
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Transformer, Rectifier
and Piezo Horn
4603 Rectifier
Converts low voltage AC current to DC of same voltage. Installs in low voltage line
between transformer and strike. Full wave bridge type. Rated 2 Amps. (200 PIV).
4605 Transformer
Converts 120VAC to 12VAC/24VAC. Rated 40 Volt-amp output assures plenty of
power for strike release.
4606 Plug-In Transformer
Converts 120VAC current to 24VAC. Plugs into standard wall outlet.
29-0218 Piezo Horn
Provides for audible indication of when a DC strike is energized. Operates with
12 VDC, 16 VDC, or 24 VDC strikes.
TRANSFORMER, RECTIFIER AND PIEZO HORN
4605
TRANSFORMER
4606 PLUG-IN
TRANSFORMER
29-0218
PIEZO HORN
4603
RECTIFIER
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
POWER P-7
(4 PLCS)
RED
AC
AC
WHITE
RED
BLACK
SHRINK
TUBING
-
MAX
MAX
4-5/64"
103.6mm
1/2"
12.7mm
8" ± 1/2"
203.2mm ± 12.7mm
2-3/16"
55.6mm
2-21/64"
59.1mm
12V 30VA
OR
LOAD
24V 40VA
N/C
LINE 120 VAC
BLACK
BLACK GREEN
2-7/8"
73mm
3-7/8"
98.4mm
2-1/4"
57.2mm
5/32"
4mm
4"
101.6mm
1-7/32"
31.mm
1-49/64
44.8mm
2-1/32"
51.6mm
1/8"
3.2mm
Ø
Ø
TRANSFORMER, RECTIFIER AND PIEZO HORN
4605 Transformer
4603 Rectifier
29-0218 Piezo Horn
4606 Plug-In Transformer
Dimensions
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following
related products, available separately:
This product is compatible with the following products:
Power Deadlatches Electric Strikes Trim
PS-1, PS-SE, PS-LR, and 4612 Power Transfer Device. 4300 Electrified Deadlatch. 7100, 7200, 7400 Series
Electric Strikes.
3080 Entry Trim.
HOW TO ORDER 4603, 4605, 4606 RECTIFIER, TRANSFORMER
Specify quantity and the following information. Order related products separately.
ACCESSORY
460 3
3 Rectifier
5 Transformer
6 Transformer (plug in)
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
P-8 POWER
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
The 4612 Power Transfer Device channels electrical
wiring from the door frame into the door itself. This powers
electric strikes, locks, exit bars, and more on doors hung
with butt-type hinges.
4612 Power
Transfer Device
Function
Provides a secure and unobtrusive means of channeling electrical wiring from the
door frame into the door itself, for powering electric strikes, locks, exit bars, etc.
Suitable for any door hung with butt-type hinges, including continuous or pivots
offset 3/4" or less. (Not compatible with center-pivot doors.)
Specifications
UL634
CONDUIT
• Spring steel helix has internal diameter of approximate
5/16”. This provides ample room for multiple wires of
the low voltage type used with most electrical hardware.
HOUSING
• Stamped steel, approximately 1/16” thick. Short (105°
swing) version shown is 11-1/12” long. 180° version is
20-5/21” long. Chrome finish.
CASE-KNIFE GUARD
• Particularly for out-swinging doors, a steel barrier
fence offers extra protection against attack on the
conduit by knives, shims, or other tools. Completely
hidden when door is closed.
OPTIONS
• Available for application in aluminum, hollow steel,
or wood door and frames. Standard (short) version
suits doors that swing up to 105°. A longer version is
available for doors that open 180°. Swing Clear option
is also available.
STANDARD PACKAGE
• Individually boxed with fasteners as required for each
application type: wood, steel, or aluminum. Shipping
weight approximately 1 lb.
4612 POWER TRANSFER DEVICE
ALUMINUM HOLLOW
METAL
WOOD FIRE RATED
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
POWER P-9
4612 POWER TRANSFER DEVICE
Installation
TYP.
FRAME
FROM
POWER
SOURCE
TO ELECTRIC
HARDWARE
DOOR
#6 X 1"
SELF-TAPPING
SCREW (4)
#8 X 3/8"
PAN HEAD
SCREW (2)
SPRING
M4 SCREW
(2PLCS) DOOR
DIA.
(2PLCS)
(3 PLCS)
DIA.
3/4"
19.1mm
10-5/32"
258mm
15/32"
11.9mm
12-23/32"
321.5mm
21/32"
17mm
11-25/32"
299.2mm
15/32"
11.9mm
15-7/16"
392.1mm
3-1/2"
88.9mm 35/64"
13.9mm
DIA.
9/64"
3.6mm
10-9/32"
261.18mm
1"
25.4mm
1/8"
3.2mm
6-3/4"
171.5mm
7/16"
11.1mm
15/16"
23.8mm
1/4"
6.4mm
11/16"
17.5mm Door and Frame Prep - 105˚ Swing
1. For wood frame, the rectangular cutout is 2” deep minimum.
2. 4612 Power Transfer Device is designed to protect the wire. Care
should also be taken when inserting wires through this device.
3. Only stranded wires to be employed.
4. Size and number of wires must comply with the National Electric Code,
NFPA, and local authorizes having jurisdiction. Wire size shall be at
least 22 gauge.
5. This device is intended for low voltage use only (30 VAC, 42.5 VDC,
10 W max.).
6. Wire should be labeled, appliance wiring material with minimum
1/32” thick insulation.
CASE-KNIFE GUARD
105˚ Swing
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlatches Electric Strikes Exit Devices Trim
4300 Electrified Deadlatch. 7100, 7200, 7400 Series Electric Strikes. All electrified exit devices. 3080 Entry Trim, 3090P/3090C Keyless Entry
HOW TO ORDER 4612 POWER TRANSFER DEVICE
Specify quantity and the following information. Order related products separately.
DOOR SWING
4612 -1
1 105° swing
1SC Swing clear, 90°
2 180° swing
Dimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
P-10 POWER
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
ARM-014-9/14
TERMS & ICON GLOSSARY
Terms & Icon
Glossary
Definitions of commonly used terms plus classifications
and descriptions of the icons found throughout this catalog.
Terms Glossary
Backset: The horizontal dimension from the front of the faceplate to the center of the cylinder.
Cam: The part on the back of a cylinder that rotates when the key is turned, and operates the lock mechanism.
Deadbolt: A lockbolt having no spring action. Usually rectangular and actuated by cylinder or thumbturn.
Deadlatch: A lock with a radiused or bevelled spring-loaded latchbolt which may be automatically or manually locked against unauthorized retraction
and will self latch when the door returns to the closed position.
Dogging: The means of retaining the lockbolt or exit device mechanism in the open position to allow the door to be free swinging.
Escutcheon: An ornamental or protective plate that is fixed to the stile of the door and slips over the cylinder, thumbturn, handle or similar.
Exit Device: A horizontal bar running at least two-thirds of the width of the door leaf, where pressure on the bar releases the locking arrangement.
Keyed Alike (KA): All cylinders may be operated by the same key.
Keyed Different (KD): Different keys operate each cylinder or group of cylinders.
Latchbolt: A bevelled or radius bolt which operates on a spring return so that the lock may self-lock.
Schoolhouse Function: The inside operation of the deadlock is limited to unlocking only. The lock is modified to prevent someone (like a student)
from locking up the classroom, usually with a thumbturn, from the inside.
Solenoid: A device that when energized with electrical current, develops a magnetic pull motion enabling mechanical work to be effected (such as
plunger movement that releases the blocking arm on electric strikes).
Icon Glossary
ICON CLASSIFICATION DESCRIPTION
FIRE RATED
FIRE-RATED
Products with a fire rating have been evaluated and listed to UL10B, “Fire
Test of Door Assemblies” and UL10C, “Positive Pressure Fire Tests with Door
Assemblies”. The hourly rating qualification is also noted.
GRADE
GRADE 1 Passed Requirements of 1500 lbs. static force, 70 ft. lbs of impact force and
withstands 500,000 cycles of operation.
ICON GLOSSARY CONTINUED ON BACK
GENERAL INFORMATION GI-1
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
TERMS & ICON GLOSSARY
ICON CLASSIFICATION DESCRIPTION
GRADE 
GRADE 2 Passed requirements of 1000 lbs. static force, 50 ft. lbs. of impact force and
withstands 300,000 cycles of operation.
UL 
BURGLARY
LISTED
UL 1034 BURGLARY LISTED Products with a UL 1034 listing are compliant as burglary resistant electric
locking mechanisms.
UL LISTING
UL Listing means that UL has tested representative samples of the product and
determined that it meets UL's requirements. These requirements are based
primarily on UL's published and nationally recognized Standards for Safety.
UL LISTING
UL Listing means that UL has tested representative samples of the product and
determined that it meets UL's requirements. These requirements are based
primarily on UL's published and nationally recognized Standards for Safety. This
icon indicates compliance with both Canadian and US requirements.
WARNOCK-HERSEY/INTERTEK LISTING
Intertek Listing means that Intertek has tested representative samples of the
product and determined that it meets Intertek's requirements. These requirements
are based primarily on Intertek's published and nationally recoginzed Standards.
ALUMINUM
ALUMINUM This product suitbable for aluminum doors.
ELECTRIFIED
OPTION
ELECTRIFIED OPTION This product is available with electrification option.
ELECTRIFIED
PRODUCT
ELECTRIFIED PRODUCT This is an electrified product.
FULL GLASS
FULL GLASS DOOR This product suitable for full glass doors.
HOLLOW
METAL
HOLLOW METAL DOOR This product suitable for hollow metal doors.
ROLLUP DOOR
ROLL-UP DOOR This product suitable for roll-up doors.
WOOD
WOOD DOOR This product suitable for wood doors.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
GI-2 GENERAL INFORMATION
ARM-014-9/14
ARCHITECTURAL FINISHES
Architectural
Finishes
Not all finishes available on all products. For more detailed
information on applicable finishes, please refer to the How
to Order for each product.
Finish Chart
BHMA FINISH CODE ADAMS RITE FINISH CODE MATERIAL
603 603 Steel, Zinc Plated
605 US3 Bright Brass, Clear Coated
606 US4 Satin Brass, Clear Coated
611 611 Bright Bronze, Clear Coated
612 612 Satin Bronze, Clear Coated
626 626 Brass or Bronze, Satin Chromium Plated
628 628 Anodized Satin Aluminum
629 US32 Bright Stainless Steel
630 US32D Satin Stainless Steel
652 652 Steel, Satin Chromium Plated
682 682 Zinc, Satin Chromium Plated
689 130 Any Material, Aluminum Painted
690 121 Any Material, Dark Bronze Painted
693 119 Any Material, Black Painted
313 Anodized Dark Bronze Aluminum
335 Anodized Black Aluminum
CHP Anodized Light Bronze Aluminum
10B Any Material, Dark Bronze Powder Coated
672 US26 Bright Chromium Plated Aluminum
702 US26D Satin Chromium Aluminum
GENERAL INFORMATION GI-3
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
HANDING OF DOORS
Handing of Doors
The handing of a door is determined from the outside of
the opening.
STANDING OUTSIDE THE DOOR:
• If the hinges are on the left, it is a left hand door.
• If the hinges are on the right, it is a right hand door.
• If the door opens away from you, it is a regular bevel door.
• If the door opens toward you, it is a reverse bevel door.
INSIDE
LEFT HAND RIGHT HAND
LEFT HAND
REVERSE BEVEL
RIGHT HAND
REVERSE BEVEL
OUTSIDE
INSIDE
OUTSIDE
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
GI-4 GENERAL INFORMATION
ARM-014-9/14
ADAMS RITE LIMITED WARRANTY
Adams Rite
Limited Warranty
Products sold under the Adams Rite brand in the United States of America
are warranted free from defects in workmanship and materials under normal
use and service.
This warranty does not cover defects or damage arising from improper installation,
lack of or improper maintenance, improper storage, shipping and handling,
corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized
service, or use with unauthorized non-Adams Rite products or parts.
This warranty is void if any modification is made to the product, regardless
of whether the modification causes or contributes to the alleged defect. All
modifications are made at the risk of the party making the modification.
Should any defect of manufacture (in material or workmanship) occur in its
products, Adams Rite, upon prompt notification and proof to its satisfaction that
the product was defective in manufacture for the use intended by Adams Rite,
will at its option, exchange the product, repair the product, or refund the price
charged by Adams Rite, FOB factory within the stated time frame listed below.
• All mechanical products for five (5) years from date of manufacture
• Ultraline 7400 Electric Strikes for five (5) years from date of manufacture
• All electrical products for three (3) years from date of manufacture, with the
exception of the exit devices with the SE option
• SE option on exit devices: for optimal performance Adams Rite requires that
all exit devices with the SE option be powered using Adams Rite PS-SE
power supplies. Failure to do so may cause permanent damage to the exit
device and will void the manufacturer’s warranty. When installed with PS-SE
power supplies, SE exit devices are under warranty for three (3) years from
date of manufacture.
General RMA Procedure
Product repair or replacement, or associated charges, will not be accepted under
this warranty unless prior authorization from Adams Rite has been given. Upon
receipt of products returned for repair or replacement, Adams Rite will determine
whether products qualify for repair or replacement under this warranty. Adams
Rite has no liability to pay any costs of repair performed by anyone other than
qualified personnel authorized by Adams Rite prior to the work being done.
Written notice of a product or component part believed to be defective as
covered by this warranty should be sent to Adams Rite, 10027 S. 51st Street,
Suite 102, Phoenix, Arizona 85044 or CustomerCare@AssaAbloyEMS.com
and should include your name and address, an identification of the product
or component part and a brief description of the defect. Notice of a product or
component part believed to be defective as covered by this warranty may also be
accepted over the telephone by Adams Rite, 800.872.3267.
Upon receipt of such notice, if the customer has an account with Adams Rite or
a valid credit card, an advance replacement product may be ordered whereby
Adams Rite will ship a replacement product to the customer free of charge. If
Adams Rite does not receive the original defective product from the customer
within 60 days, Adams Rite will charge the customer’s account or credit card
for the price of the advanced replacement product plus freight costs. Upon
inspection of the returned product by Adams Rite, a decision will be made
whether or not to charge the customer for the advanced replacement Adams
Rite product. This decision will be made solely by Adams Rite in accordance with
the provisions of these Terms. Obsolete products will not be accepted for return.
Return Material Authorizations (RMAs) will be closed if the
goods are not received within 60 days of issuance.
If Adams Rite receives original defective product from the
customer within 60 days of RMA issuance, and if the customer
is requesting credit for the defective material, the customer
must reference the valid Adams Rite Purchase Order number
upon which the product was originally ordered. If the original
Purchase Order number is not available, at Adams Rite’s
option a credit may be issued at the customer’s current cost.
This decision will be made solely by Adams Rite in accordance
with the provisions of these Terms.
Transportation charges and insurance on all returned materials
must be prepaid by the purchaser when merchandise is
ordered in error. On goods returned for customer convenience,
when the purchaser returns materials in compliance with these
Terms which are accepted by Adams Rite, the purchaser may
be issued a credit for 65% of the purchase price, with 35%
charged by Adams Rite for handling and reprocessing. All
refunds will be in the form of a credit.
Cancellation
As an industry leader, Adams Rite is committed to maintaining
the highest standard of quality and ensuring strict compliance
to industry codes. Adams Rite’s proud history of customer
service and manufacturing agility allow quick response times
to customer’s changing needs, which may include special
orders or product modifications. Please be advised that all
product modifications require special authorization to ensure
the order fully meets customer’s expectations. Customers are
asked to allow for an extended lead time on all special orders.
Please note that at Adams Rite’s option, product modifications
and other special orders cannot be changed, cancelled, or
returned once a ship date has been provided on an order
acknowledgement by Adams Rite.
Adams Rite prides itself on introducing new, industry-relevant,
feature-rich products. Since new solutions will surpass the
capabilities of older product lines, historical products may
be subsequently discontinued. Every effort will be made
to announce new product introductions as well as product
discontinuations in a manner that allows customers advanced
notice of these events. Once a product line is discontinued
orders will be fulfilled in order of receipt, although Adams Rite
cannot guarantee all orders can be filled. Repair services and
spare parts for discontinued product lines will be available for
some reasonable time period. Adams Rite reserves the right
to replace discontinued product with an equivalent product as
deemed by Adams Rite.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL
IMPLIED WARRANTIES ARE LIMITED TO THE DURATION
OF THIS WARRANTY. ADAMS RITE IS A DIVISION OF
HANCHETT ENTRY SYSTEMS, INC. HANCHETT ENTRY
SYSTEMS, INC. SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
GENERAL INFORMATION GI-5
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
LEED CERTIFICATION
LEED Certification
Our Sustainability Initiative
ASSA ABLOY’s drive to make sustainability an integral part of its business
philosophy and culture is apparent in the newly constructed ASSA ABLOY
Phoenix building. The Phoenix, Arizona home of Group brands Adams Rite,
HES and SECURITRON incorporates sustainable construction methods that
have earned the facility LEED® (Leadership in Energy and Environmental Design)
Silver certification from the United States Green Building Council (USGBC).
About the United States Green Building
Council (USGBC)
USGBC is an internationally recognized organization that provides the LEED
rating system, a concise framework for identifying and implementing practical
and measurable design, construction and operation of high performance green
buildings. The Phoenix facility is the first ASSA ABLOY Americas building
designed to the LEED Silver level.
Going Green
Adams Rite moved to the 94,000 square-foot Phoenix facility in 2012, joining
HES and Securitron under one roof. When designing the facility, one main priority
was to make it as eco-friendly as possible. ASSA ABLOY Phoenix incorporated
a wide variety of building design features to help improve energy efficiency, air
quality and sustainability.
Reduced Energy and Water Waste
New mechanical and electrical systems include a highly efficiency air conditioning
system, plus Energy Star® appliances and equipment. The building features
skylights, automatic controls and sensors that conserve energy as well as lights
on motion sensors and timers for climate control. Upgraded insulation and
reduced water consumption for plumbing fixtures reduce energy and water usage.
Employees in the new building benefit from improved interior air ventilation.
Reduced Carbon Footprint
Site features that contribute to the Silver LEED rating include close proximity to
a variety of services for employees and the use of native plants in landscaping
for reduced irrigation water use. Bicycle parking and shower facilities support a
reduced carbon footprint.
Other Sustainable Practices
Sustainable practices used in the construction process include
recycling and minimizing construction waste, using FSC-
certified wood, and low VOC emitting paints, adhesives, and
other surfaces throughout the building. Air was also filtered
during construction to reduce the spread of dust.
Employees and guests play a significant role in making
the work environment healthy and sustainable. Recycling
bins are strategically located throughout the building
to facilitate recycling for operations and employees.
Signs located throughout the building and internal action
committees help educate guests and employees of the
“green” features of the space and its smoke-free work
environment. Environmentally responsible cleaning
practices are used to maintain the building.
ASSA ABLOY Phoenix received formal conveyance of its
LEED Silver certification in 2012, and enjoy the opportunity to
showcase our new home as an example of ASSA ABLOY’s
commitment to sustainability.
Adams Rite receives Silver Level of LEED Certification.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
GI-6 GENERAL INFORMATION

Navigation menu