Adaptiv Technologies P0101 GPS combined Radar detector User Manual
Adaptiv Technologies, LLC GPS combined Radar detector
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3204258 |
| Application ID | cy/ZW9RsuTQqroIBetLEYQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 37.77kB (472124 bits) |
| Date Submitted | 2016-11-22 00:00:00 |
| Date Available | 2016-11-22 00:00:00 |
| Creation Date | 2017-12-18 05:17:15 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-18 05:17:15 |
| Document Title | Microsoft Word - Appendix-G User Manual_P-01-01.docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | molee |
CONTENTS MODEL FEATURES AND CONTROLS • • Radar+GPS Detection System. ALL Band Protection . . ACCESSORIES INCLUDED WITH RADAR DETECTOR • • • • • • Owner’s Manual Power Cord & Power Din Cable Mounting kit Hook & Loop Fasteners Spare Fuse Wireless Headset . MOUNTING INSTALLATION • Windshield Mounting • Dash Board Mounting • Power connection . OPERATION GUIDE • • • • • • • • • • Power on & Self-Test Feature Engaged Confirmation Mute Mode(Alert off) City Mode Mode Menu Real tone Alert Speed Radar Visual /Audio Alerts Laser Visual /Audio Alerts Wireless Headset Visual/Audio Alerts Memory Retention V. TROUBLESHOOTING GUIDE • Factory setting VI. SPEED MONITORING DEVICES • Radar speed gun • Laser speed gun VII. MAINTENANCE • Care and Maintenance • Fuse Replacement VIII. SPECIFICATIONS • • • • • General Laser Detector Radar Detector Transmitter Freqency(Tx) Wirelwss HEADSET(Rx) MODEL FEATURES AND CONTROLS • • • • • • • • • • • • • • • Real Tone Alert X, K, Ka Super Wideband Detection All Laser Detection 360° Laser Detectability Instant – On/Pulsed Radar Alert Smart Text LCD Display User Programmable Memory Retention Signal Strength Meter Visual & Audible Alarms Electronic Power On/Off Switch with Volume Control External Jack for External Laser Censors Mute Mode Hwy Nox /Hwy NoXK/ City /Cty Nox /Cty NoXK Mode GPS Function Mode 1. 2. 3. 4. 5. Bracket Lock/Release Button – Easy lock/release of the mounting bracket. Power Jack – Connection for the power cord and power cable ass’y. Speaker – Provides distinct audio alarms for X, K, Ka band radar and laser. Power & MENU Button – Turns unit on/off and menu setting. High Visibility Text Display – Provides distinct visual confirmation of signals strength, signal band identification and indicates engaged modes of operation. 6. MUTE Button – Pressing MUTE during a radar/laser encounter silences audio alerts. 7. CITY Button – Reduces the annoyance of false alerts typically encountered in urban driving areas. 8.Volume Control( +,- ) - Adjusts audio level 9. Laser Lens (Rear) – An integrated optical waveguide provides superior detection of laser signals transmitted from behind 10. Laser Lens (Front) – High gain optical lens array provides increased sensitivity and field of view for leading edge laser detection. 11. Radar Antenna – Compact, high-efficiency antenna receives radar signals. 12. Mounting Bracket Location – Slot holds mounting bracket firmly. 13. EXT – Port for external laser censor connection . ACCESSORIES INCLUDED WITH RADAR DETECTOR • • • • • • • Owner’s Manual Power Cord & Power Din Cable Usb Cable & down load adapter Cable Visual alert Cable Mounting kit Hook & Loop Fasteners Wireless Headset . MOUNTING INSTALLATION • Windshield Mounting • Dash Board Mounting • Power connection Ⅳ.OPERATION GUIDE Buttons Buttons to have adequate tactile feel and size to be actuated while using riding gloves. Backlit - blue Button Functions: Button 1 (top right)- Volume Increase and Brightness Increase. o Button 2 (bottom right) – Volume Decrease and Brightness Decrease Button 3 (top center) – Power On/Off. Button 4 –City/Highway and Volume / Brightness Mode Button 5 – Mute and Visual Indicator Intensity Off and backlights on/off. long means about 2-3 sec • Power on & Self test Press the Power Button for 2 seconds to turn the unit on or off Start Up “Adaptiv ” will be scrolled across the LCD display, entering from the right and exiting at the left, and it will scroll all the way through: Then self test will start, where each band will be displayed accompanying its alerted sound: Then the display that the system is ready: *CONNECT : GPS fix( ding dong sound alert 1sec display Radar MODE Setting Functions – Hwy NoX MODE: Highway mode X BAND no detection - Hwy NoXK MODE: Highway mode X ,K BAND no detection -City MODE: Radar signal initial double beep and until mute radar signal 4 level double beep countinuous signal strength -Cty NoX MODE: City mode X BAND no detection -Cty NoXK MODE: City mode X,K BAND no detection Main Unit Functions When radar or laser signals are detected, the detected band and its strength will be displayed, along with its distinct sound alert. Power Button Press the Power Button for 2 seconds to turn the unit on or off. Mode Button (upper left button) For City/Highway Mode, each time this button is pressed it will toggle between “City” and “Highway” modes, and the display will display the mode setting selected. A beep will be emitted with each mode change. For Peripheral Control Mode, each time this button is pressed for 2 or more seconds it will toggle between “Headset Volume Control” (Vol), and “Visual Alert Brightness Control” (LED) with the following displays: The display for the toggled Peripheral Control Mode will only be displayed on the LCD for 2 seconds, then the display will revert back to either “City” or “Highway”, unless a signal is being detected. The Peripheral Control Mode affects how the “Up” and “Down” buttons function, which will be explained later in this document. Alert Off/Dim Button (lower left button) If a radar or laser signal is detected, pressing this button will temporarily mute all audio alerts (main unit and headset) and stop the LEDs on the Visual Alert from flashing. Audio and visual alerts will be stopped for the duration of the detected signal and any new signals detected within the next seconds. When this button is pressed, will be displayed for 1 second, and the detected radar or laser signal will return to the LCD display. When this button is pressed for 2 or more seconds, it will toggle the backlight on the Main Unit buttons on/off. Up and Down Buttons (upper and lower right buttons) The “Up” and “Down” buttons control the volume of the Main Unit and the Headset, and the LED brightness of the Visual Alert. When each is pressed for 1 or more seconds, the increase or decrease in the volume/brightness will increase or decrease continuously until the maximum or minimum volume level is reached. The system will remember the last volume setting each time it is turned on, except for the Visual Alert, where auto-setting is the default (explained below). When “Headset Control Mode” is selected, the “Up” and “Down” buttons control the volume on the Main Unit and the Headset. For each level the volume is raised/lowered, the Main Unit and the Headset will emit a corresponding volume. The display is as follows: The Main Unit has a photo-sensor and it automatically controls the brightness setting on the Visual Alert. unit is turned on. The auto-setting is the default setting on the Visual Alert each time the However, it can be over-ridden by the user with a push of the “Up” or the “Down” button if “Visual Alert Control Mode” is selected. When “Visual Alert Control Mode” is selected, the “Up” and “Down” buttons control the LED brightness on the Visual Alert. Each time the button is pressed, the Main Unit will emit a beep and the Visual Alert will double flash a corresponding brightness. The auto-setting function can be turned back on by the user by select the “lowest” setting on the “Down” button. The display is as follows: Other:Tx Opertion The Main Units must operate properly and not interfere with each other when multiple units are being used in the same vicinity (>2m). The Main Unit will emit a beep every time a button is pressed (except Alert Off). The transmitter format is system data /band ID and signal strength data . The Main unit only operation transmitter (418Mhz): *Main Unit function press operation example mode change and volume up &down.(Manual Tx) * When Main Unit radar/laser signal detector is Tx formatted transmitter.(Semi Auto) GPS Function Opertion 1. GPS functions will work only after the connection to the satellites is established. SRCH will be displayed during the GPS signal reception. 2. The first time this unit is Power ON, it may take about one minute to make link with the satellites. (Cold start ) (If unit is not positioned correctly, the time can be extended.) However, from the next time, the time to catch Satellite will be -Within 3 seconds (Hot start) : Unit power on again within two hours after power Off. -Within 40 seconds.(Warm start) : Unit power on again within 24 hours after power Off. 3.Car Driving GPS function operation show display & beep sound alert. Wireless Headset:Rx Opertion The Power Button on the Headset has an LED backlight. It will flash once every 3 seconds when it is turned on. It will have a double flash every 3 seconds when it is in communication with the Main Unit. The Headset will have an auto-shut off capability if it is not in communication with the Main Unit after 15 minutes. The Headset will beep each time a function button on the Main Unit is pressed. The Headset will emit the exact same beeps as the Main Unit. The Headset must not transmit or receive interference from other radar detectors or Headsets at distances greater than or equal to 7meters. Visual Alert The Visual Alert will flash each time a function button on the Main Unit is pressed. LED Intensity to be adjustable from Main Unit buttons as well as photo sensor. Flash frequency to correlate with signal strength. Memory Retention Electronically remembers all your own settings for a certain period of time after power-off. V. TROUBLESHOOTING GUIDE PROBLEM: No display or audio. • Check fuse in the plug and replace if necessary with a 2 amp • Check fuse for lighter socket; replace if necessary. • Make sure lighter socket is clean. type. PROBLEM: Unit alarms when vehicle hits bumps. • Check for loose lighter socket; tighten and clean. • Check connections at both ends of power cord. Substitute another cord to determine if cord is defective. Return defective cord to the factory. PROBLEM: Unit alarms when using vehicle equipment or electrical accessories (brakes, power mirrors/windows, directionals, horn, etc.). • Vehicle’s electrical system, including battery and alternator, may have electrical noise. Install a filter capacitor (470mfd. 25 volt or larger capacitance value) on the back of the lighter socket. Factory setting All user features can be reset to factory settings. Please follow below steps for reset. 1. Unplug Power Cord from unit 2. Press and hold Power and Mute/City Key. 3. Plug Power Cord into unit. 4. Wait for 2 beeps. 5. Release Power and Mute button. Unit is now reset - Factory reset • Highway Mode On. • Dim/Dark Mode to full illumination of display. VI. SPEED MONITORING DEVICES Radar speed gun A radar gun operates by transmitting radio waves at certain frequencies which reflect off objects and are then picked up by the radar gun’s receiving section. When a radar beam reflects off a moving target, a measurable frequency shift occurs. The radar unit converts this shift into miles per hour to determine your vehicle’s speed. Laser speed gun It’s well documented that many radar guns cannot reliably provide the speed of a targeted vehicle that is traveling in a group of vehicles. In contrast, a laser gun can target a specific vehicle out of a line of traffic and determine its speed. The advantage of laser over radar in terms of target identification is the result of the laser gun’s narrow beam. A radar transmission can cover more than a four-lane highway at a distance of 1,000 feet, compared with a laser transmission which covers about 6 feet at the same distance. For best protection, keep these points in mind: • Because your vehicle’s license plate or headlights are the laser gun’s primary targets, mounting your detector on the dashboard can improve laser detection at short range. • Do not follow closely behind any vehicle you cannot see through. If you can’t see past a vehicle ahead of you, chances are your detector won’t either. • The receiving range of your laser detector will not be the same as a radar detector. Laser guns are most often used at short range VII. MAINTENANCE Care And Maintenance During the summer months, avoid prolonged exposure to direct sunlight by removing your unit from the dash when your vehicle is parked for an extended period of time. Do not spray water, cleaners or polishes directly onto the unit. The spray may penetrate through the openings and damage the unit. Also, do not use any abrasive cleaners on the unit’s exterior. Fuse Replacement The lighter socket plug is equipped with a replaceable 2 amp 3AG fuse located behind the silver tip. To replace the fuse, carefully unscrew the tip of the plug. (IMPORTANT: Unscrew slowly. The tip contains a spring which may fly out when disassembling.) Insert the new fuse with the spring and screw on the tip. With use, cap on plug may loosen. Retighten occasionally. *FCC ID : VWV-P0101 VIII. SPECIFICATIONS • General Dimensions: Weight: Power Requirement: Temperature Range: 75mm(W)x 115mm(L) x 48mm(H) 198g CAR Battery 12- 15V DC Operating -20°C to +80°C Storage -40°C to +100°C • Laser Detector Receiver Type Sensor Front End Detector Type Receiver Bandwidth Spectral Response Pulse Laser Signal Receiver Convex Condenser Lens Pulse Width Discriminator 30 MHz 800- 1100 nm • Radar Detector Receiver Type Detector Type Antenna Type Frequency of Operation Double Conversion Superheterodyne Scanning Frequency Discriminator Linear Polarization 10.525 GHz ± 50 MHz (X Band) 24.150 GHz ± 100 MHz (K Band) 34.700 GHz ± 1300 MHz (Ka Band) • GPS Detector Receiver Type& Freq. L1 Frequency C/A code. 1575.42MHz GPS Chipset ublox chipset ver.8.0 Antenna Type PATCH Antenna (Linear Polarization) • Transmitter Freqency(Tx) Transmitter Manual Tx & Semi Auto 418.00 MHz ± 75 KHz Moudulation ASK(Amplitude shift keying) ai aa a ± i ia aa • Wirelwss HEADSET(Rx) Receiver Type Detector Type Antenna Type Frequency of Operation Power Requirement i a Scanning Frequency Discriminator Linear Polarization 418.00 MHz ± 5 MHz 3V DC Battery (CR-2450)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:cf54ebde-a6aa-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:22 03:31:34Z Create Date : 2017:07:22 03:31:34Z Creator Tool : UnknownApplication Document ID : uuid:cf54ebde-a6aa-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools