Adaptrum ACRS2F-B1 Fixed TV Band Device User Manual Base

Adaptrum, Inc Fixed TV Band Device Users Manual Base

Contents

Users Manual Base

Initial Base SetupFCC / OFCOM Database Mode© 2017 Adaptrum, Inc.QUICK START GUIDE v1.5
Initial Base Setup | 21. Select device from dropdown menu and open GUI2. Fill out all information in form shown below For OFCOM: Add Authorization Key provided by Nominet3. Save All Settings to Target and Reboot (wait 60 seconds)4. Open GUI and select device from dropdown menu5. Wait for Channel list to come up6. Select any channel from database channel dropdown listDatabase Mode: Base(FCC/OFCOM) mode(1)ACRS 2.0 Base Initial SetupLocationInformationRegistration InformationNetworkSettingsOFCOM ONLY: Authentication TokenSelect a ChannelGet Channel List Again
Initial Base Setup | 37. Select the Diagnostics Tab8. Measure Available DB Channel Quality and pick a channel with the smallest number/greenest bar9. Select the Database Tab and click Reset Channel Request10. Select chosen channel from dropdown list11. Click Start Service to begin broadcasting12. Select Persistent Channel if device should maintain service even after power cycle For OFCOM: Do not use Persistent Channel and keep GUI open so that GUI can notify database of any changes.13. Save and Reboot to commit all changes14. Proceed to congure Adaptrum ClientsPersistent Channel Start ServiceMeasure Channel QualityLower number is better
Copyright © 2017 Adaptrum, Inc.408 850 9996 adaptrum.com 1. Client Yagi antennas should all be pointed directly at the Base Panel antenna2. All Client antennas must be within a 120-degree arc3. The Base antenna direction should point towards the center of the Clients’ sectorPanel to Multi-Yagi Client InstallationsAntenna OrientationBasePanel AntennaClient Yagi Antenna

Navigation menu