Adc Campus Rex2 Rs Users Manual Interface Card User

2015-02-05

• Installing and Accessing theREX2
  • Installing the CampusREX2
    • Installing into a Desktop Unit
    • Installing into a Campus-Star Chassis
  • Connecting the Ethernet Line
  • Powering Up and Checking the Connection
  • Setting Up Access to the Campus Unit
    • Connecting to the Campus Unit Console Port
  • Logging In
    • Logging In a Campus Unit Using Telnet
    • Logging In a Local Campus Unit through the Console Port
    • Logging On a Remote Campus Unit
  • Logging Off
  • Using the Menus
  • Operating with Default Values
• Configuring HDSLParameters
  • Configuring HDSL Parameters
    • Accessing HDSL Configuration
    • Selecting HDSL Parameters
  • Configuring HDSL Alarms
    • Accessing HDSL Alarms Configuration
    • Setting HDSL Alarms
• Configuring the REX2
  • Accessing the REX2 Configuration and Status Screen
  • Configuring the CampusREX2 as a Bridge
    • Configuring Bridge Protocol, Encapsulation and Timing
    • Configuring Bridge Features
    • Saving the Bridge Configuration
    • Accessing the Bridge and ARP Tables
  • Configuring the CampusREX2 as a Router
    • Configuring Routing Protocol, Encapsulation and Timing
    • Configuring Routing Features
    • Configuring DHCP Services
    • Saving the Router Configuration
    • Accessing the Routing Tables
  • Configuring the CampusREX2 for SNMP Management
    • Accessing the SNMP Configuration
    • Entering SNMP Parameters
    • Enabling Authentication Error Trap Generation
    • Configuring Trap Receivers
• Managing SystemParameters
  • Accessing System Configuration
  • Setting the Time and Date
  • Identifying the Unit and Circuit
  • Setting a Password
  • Restoring Default Values
  • Viewing Product Information
• Monitoring and Testing the CampusSystem
  • Monitoring HDSL Performance
    • Monitoring Current System Status
    • Viewing 24-Hour Performance History
    • Viewing Seven-Day Performance History
    • Viewing Local Alarm History
  • Viewing Ethernet Statistics
    • Viewing Bridge Statistics
    • Viewing Router Statistics
  • Performing Tests
    • Performing Loopback Testing
  • Resetting the Campus Unit
• Managing Software
  • Upgrading Campus Unit Software
  • Recovering Software
• Using the LCD for Configuration andManagement
  • Navigating the LCD Menus
  • Setting the HDSL Parameters
    • Accessing LCD HDSL Configuration
    • Configuring Standard Mode
    • Configuring Extended Mode Parameters
  • Configuring the CampusREX2
    • Accessing LCD REX2 Configuration
    • Configuring REX2 Parameters
    • Saving the REX2 Configuration
  • Restoring the System to Default Values
  • Viewing and Configuring Alarms
    • HDSL Alarms
    • Local Alarms
    • Remote Alarms
  • Configuring Loopbacks
    • Initiating a Loopback
    • Clearing a Loopback
    • Setting the Loopback Timeout
  • Viewing System Information
  • Viewing Status Information
    • Ethernet Information
    • HDSL Margin
  • Port Statistics
    • Bridge Port Statistics
    • Router Port Statistics
• Internetworking and Management Overview
  • Composition of a CampusRS System
  • Application
    • Point-to-Point LAN Extension
    • LAN Connections Over a WAN
  • MAC-Level Bridging and Spanning Tree Protocol
    • About MAC-Level Bridging
    • About Spanning Tree Protocol
  • IP Routing
    • Static Routing
    • Dynamic Routing
    • CampusREX2 IP Addresses
  • Management Protocols
    • SNMP
    • Telnet
    • FTP
  • MIB and Trap Support
  • DHCP
  • Encapsulation Protocols
  • Product Compatibility
    • Compatibility with Earlier Campus Products
    • Compatibility with Campus-RS Products
    • Compatibility with Earlier Versions of Campus Products
• Technical Reference
  • Specifications
  • Default Settings
  • Ethernet Port
  • Standards
• Abbreviations
• Contacting ADC